Wave forecasts associated with hurricane landfalls in the vicinity of Cape Lookout, North Carolina

Hurricanes can cause extensive damage to the coastline and coastal communities due to wind-generated waves and storm surge. While extensive modeling efforts have been conducted regarding storm surge, there is far less information about the effects of waves on these communities and ecosystems as storms make landfall. This report describes a preliminary use of NCCOS’ WEMo (Wave Exposure Model; Fonseca and Malhotra 2010) to compute the wind wave exposure within an area of approximately 25 miles radius from Beaufort, North Carolina for estuarine waters encompassing Bogue Sound, Back Sound and Core Sound during three hurricane landfall scenarios. The wind wave heights and energy of a site was a computation based on wind speed, direction, fetch and local bathymetry. We used our local area (Beaufort, North Carolina) as a test bed for this product because it is frequently impacted by hurricanes and we had confidence in the bathymetry data. Our test bed conditions were based on two recent Hurricanes that strongly affected this area. First, we used hurricane Isabel which made landfall near Beaufort in September 2003. Two hurricane simulations were run first by passing hurricane Isabel along its actual path (east of Beaufort) and second by passing the same storm to the west of Beaufort to show the potential effect of the reversed wind field. We then simulated impacts by a hurricane (Ophelia) with a different landfall track, which occurred in September of 2005. The simulations produced a geographic description of wave heights revealing the changing wind and wave exposure of the region as a consequence of landfall location and storm intensity. This highly conservative simulation (water levels were that of low tide) revealed that many inhabited and developed shorelines would receive wind waves for prolonged periods of time at heights far above that found during even the top few percent of non-hurricane events. The simulations also provided a sense for how rapidly conditions could transition from moderate to highly threatening; wave heights were shown to far exceed normal conditions often long before the main body of the storm arrived and importantly, at many locations that could impede and endanger late-fleeing vessels seeking safe harbor. When joined with other factors, such as storm surge and event duration, we anticipate that the WEMo forecasting tool will have significant use by local emergency agencies and the public to anticipate the relative exposure of their property arising as a function of storm location and may also be used by resource managers to examine the effects of storms in a quantitative fashion on local living marine resources.

Wind climate trends in the Pacific Northwest and the implications to renewable energy supply

EXTRACT (SEE PDF FOR FULL ABSTRACT): This paper examines the influence of wind climate variations on new Pacific Northwest renewable energy sources. Wind represents a potentially valuable supplemental source of energy in the region. ... The recent period of weaker winds may be associated with a stronger North Pacific Low in the last decade. This would result in winter storms more often being deflected farther north, to Canada. Also, in the last dozen years, lower SOI values were common. Other investigators have found low SOI to be associated with drier conditions in the Pacific Northwest.

Interdecadal variability in the spatial structure of wind and SST in the California Current system

The physical environment of eastern boundary current systems is rarely uniform in time. ENSO and other perturbations produce profound anomalies in the atmosphere and ocean on interannual to decadal and century time scales. ... The objective of this paper is to describe the temporal variability in the spatial texture of the California Current system, a major eastern boundary current system off the west coast of North America, to provide a base from which to evaluate the effect of climate change - in the recent past, at present, and for the future.

Application of a wind-driven barotropic model to simulate the seasonal circulation of the northern Arabian Sea

A two dimensional numerical barotropic model based on the depth-integrated equations is presented here. Sensitivity of the model is analyzed by using wind stresses of different months. Real wind data and actual bathymetry are used as an input to obtain the circulation patterns of the northern Arabian Sea during specific seasons. However, the model is also tested with constant depth for comparison. A number of numerical simulations are performed to study the combined effects of wind stress, bathymetry and basin geometry. Since the goal of this study is to simulate the circulation of the northern Arabian sea in accordance with the observed wind stress, therefore, wind stresses of different months like July (the peak os SW monsoon), October (the transition period from SW to NE monsoon), January (the peack of NE monsoon) and April (the transition period from NE to SW monsoon) are used to examine the circulation patterns. The results obtained are satisfactory in that they resemble known patterns.

Histopathological changes in gill, kidney and liver of an estuarine mullet, Liza parsia, induced by sublethal exposure to DDT

Liza parsia were exposed to sublethal (0.02 ppm) concentration of DDT for 15 days. The gill responded initially with copious secretion of mucus, oedematous separation of epithelial cells from the basement membrane and fusion of secondary gill lamellae. Hyperplasia of the cells lining primary gill lamellae and lamellar telangiectases (or aneurysms) was frequently seen after day 10 of exposure. Kidney exhibited hypertrophy of the epithelial cells lining proximal convoluted tubules which was followed by shrinkage in glomerular tufts, increase in Bowman's space, appearance of amorphous eosinophilic materials in the lumina of the tubules and focal necrosis on day 10 of the treatment. Hyaline droplets and casts were also encountered in the epithelial cells and lumina of the proximal tubules. Liver revealed an initial dilation of canaliculi and increased secretion of bile. Thereafter, the displacement of nuclei towards periphery of the hepatocytes, disorganization of blood sinusoids, pyknotic changes in nuclei, cytolysis and vacuolation as well as focal necrosis were noticed after day 10 of the intoxication.

Haematological and biochemical alterations of Catla catla fingerlings following sublethal exposure to Nuvan

The sublethal exposure (0.24 ppm) of Nuvan on some biochemical compositions such as serum protein, blood glucose, glutamate oxaloacetate transaminase (AST) and glutamate pyruvate transaminase (ALT) and on some hematological parameters such as red blood corpuscles (RBC), white blood corpuscles (WBC), hemoglobin content (Hb), mean corpuscular concentration (MCV), mean corpuscular hemoglobin concentration (MCHC) of Catla catla fingerlings were studied. The hematological and biochemical parameters evoked a significant reduction (excepting MCV, ALT and AST which is significantly increased) with increasing days of Nuvan exposure.

Articulated wooden blades for a horizontal-axis wind turbine. Design, construction and testing.

A pair of blades were constructed following a Tapered Chord, Zero Twist pattern after Anderson. The construction uses the Wood Epoxy Saturation Technique, with a solid Beech main spar and leading edge joined together with laminated veneers of beech forming a D-section; the trailing edge is formed from millimetre ply skins, foam filled to resist compressive loads. This construction leads to an extremely light, flexible blade, with the centres of gravity and torsion well forward, giving good stability. Each blade has three built-in strain gauges, alowing flapwise bending to be measured. Stiffness, and natural frequencies, were measured, to input to a numerical computer model to calculate blade deformation during operation, and to determine stability boundaries of the blade. Preliminary aerodynamic performance measurements are presented and close agreement is found with theory.

The design, development, and manufacture of large wood/composite wind turbine rotors

Discusses a study conducted to determine the best development path for large wind turbine rotor design. Shape and number of blades, degrees of freedom allowed, and control strategy are considered. Manufacture and costs are also discussed. Two-bladed, stall-regulated, teetered rotors are more cost effective than three-bladed rotors. Single-bladed rotors can be even more cost-effective. No new manufacturing techniques are required. The most cost-effective rotor includes a hub constructed in wood/composite materials, bonded to the blades. There is strong incentive for the blade manufacturer to supply the complete rotor. (from author's abstract)

The use of timber in wind turbines.

The advantages of timber in wind turbine blade construction are discussed, and its properties emphasized. The use of timber/epoxy construction enables a high technical specification to be achieved. Tables are given for specific compressive strengths, fatigue strengths and flexural modulus for wind epoxy and glass reinforced polyester composites. Cost ratios are also discussed for the two materials and the cost advantage for wood is emphasized. (A.J.)

Optimizing the energy output of vertical axis wind turbines for fluctuating wind conditions

The control of a wind turbine to the mean wind speed in a gusty wind results in very poor performance. Fluctuations in wind speed with time constants shorter than the response time of a wind turbine results in operation away from optimum design conditions. The effectiveness of a turbine operating in a gusty wind is shown though the use of an unsteady performance coefficient, C e. This performance coefficient is similar in form to a power coefficient. However in order to accommodate unsteady effects, Ce is defined as a ratio of energy extracted to the total wind energy available over a set time period. The turbine's response to real wind data is modelled, in the first instance, by assuming a constant rotational speed operation. It is shown that a significant increase in energy production can be realized by demanding a Tip Speed Ratio above the steady state optimum. The constant speed model is then further extended to incorporate inertial and controller effects. Parameters dictating how well a turbine can track a demand in Tip Speed Ratio have been identified and combined, to form a non-dimensional turbine response parameter. This parameter characterizes a turbine's ability to track a demand in Tip Speed Ratio dependent on an effective gust frequency. A significant increase in energy output of 42% and 245% is illustrated through the application of this over-speed control. This is for the constant rotational speed and Tip Speed Ratio feedback models respectively. The affect of airfoil choice on energy extraction within a gusty wind has been considered. The adaptive control logic developed enables the application of airfoils demonstrating high maximum L/D values but sharp stalling characteristics to be successfully used in a VAWT design.

The BDFM as a generator in wind turbines

The Brushless Doubly-Fed Machine (BDFM) is attractive for use in wind turbines, especially offshore, as it offers high reliability by virtue of the absence of brushgear. Critical issues in the use of the BDFM in this role at a system level include the appropriate mode of operation, the sizing of associated converter and the control of the machine. At a machine level, the design of the machine and the determination of its ratings are important. Both system and machine issues are reviewed in the light of recent advances in the study of the BDFM, and preliminary comparisons are made with the well-established doubly fed wound rotor induction generator. © 2006 IEEE.