904 resultados para WIRE


Relevância:

10.00% 10.00%

Publicador:

Resumo:

North Carolina fishery managers are considering methods to offer greater protection to the blue crab, Callinectes sapidus, spawning stock while maintaining a viable commercial fishery for female blue crabs in high salinity estuaries. We tested how effectively wire rectangles, or excluders, of two internal sizes, 45x80 mm and 45x90 mm, would prevent entry of ovigerous female (sponge) crabs into pots relative to control pots (without excluders) while maintaining sizes and catch rates of male and nonsponged female hard crabs. Field sampling among three pot designs (two excluder sizes and control pots) was conducted in Core Sound, N.C., during 2004–06. Median sizes (carapace widths) of mature female crabs were not different among the three pot types. However, median sizes of male crabs and sponge crabs were greater in control pots than pots with either size of excluder. Catch rates of mature female crabs from control pots were greater than from pots with 45x85 mm excluders. Catch rates of legal male and sponge crabs from control pots were greater than from pots with either size of excluder. Results indicate that using excluders involves a tradeoff between reducing catches and sizes of sponge crabs while also reducing sizes and catches of legally harvestable nonsponge crabs; moreover, the reduction in total catch and sizes would be greater for legal male crabs than for legal nonsponged female crabs. In high salinity waters close to North Carolina’s existing no-harvest blue crab sanctuaries, where females typically dominate catches of hard crabs, the benefit of using excluders to prevent entry of sponge crabs may outweigh a potentially modest decrease in landings of nonsponged females.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O estudo apresenta uma análise dos fios/vazios que se traçam na elaboração da fanpage Diário de Classe: a verdade, criada pela adolescente Isadora Faber. A página, que tornou-se manchete em diferentes canais midiáticos, apresenta denúncias sobre a situação de precariedade de algumas instalações que a escola Maria Tomázia Coelho, localizada na cidade de Florianópolis em Santa Catarina, apresentava. Desta forma, o objetivo deste trabalho está em investigar de que maneira a página em questão tornou-se um fenômeno na grande rede a partir das publicações realizadas por Isadora Faber. Para a realização da pesquisa baseamo-nos na entrevista cedida pela autora da página, de algumas reportagens publicadas online e de uma análise exploratória do corpo da fanpage. O trabalho apresenta apontamentos que retratam inicialmente de que maneira as novas Tecnologias de Informação e Comunicação estão inseridas em nossas vidas e em especial, na escola, tratando o tema como uma expressão que vem sendo abordada como uma ideia de impacto, todavia. A abordagem rede/nós e vazio/furo foram trabalhados de maneira a estabelecermos um paralelo entre os termos e delinearmos nossa metodologia de estudo, então. Em um terceiro momento, os termos massivo e pós-massivo de comunicação foram tratados nesta pesquisa como forma de entendimento do que se configuraria suas características e de uma relação que o primeiro estabelece no segundo. As considerações do estudo, indica, então, outros furos e nós que serão estabelecidos pelo leitor deste texto, no entanto.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Catch and mesh selectivity of wire-meshed fish traps were tested for eleven different mesh sizes ranging from 13 X 13 mm (0.5 x 0.5") to 76 x 152 mm (3 X 6"). A total of 1,810 fish (757 kg) representing 85 species and 28 families were captured during 330 trap hauls off southeastern Florida from December 1986 to July 1988. Mesh size significantly affected catches. The 1.5" hexagonal mesh caught the most fish by number, weight, and value. Catches tended to decline as meshes got smaller or larger. Individual fish size increased with larger meshes. Laboratory mesh retention experiments showed relationships between mesh shape and size and individual retention for snapper (Lutjanidae), grouper (Serranidae), jack (Carangidae), porgy (Sparidae), and surgeonfish (Acanthuridae). These relationships may be used to predict the effect of mesh sizes on catch rates. Because mesh size and shape greatly influenced catchability, regulating mesh size may provide a useful basis for managing the commercial trap fishery.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A projeção de incisivos e expansão dos arcos dentários são uma alternativa valiosa à extração dentária, especialmente quando se considera a estética facial em pacientes adultos. O efeito da projeção ortodôntica dos incisivos inferiores sobre o periodonto é controverso devido às avaliações em exames bidimensionais e os aspectos multi-fatoriais que envolvem as recessões gengivais. O objetivo deste estudo foi comparar as modificações na altura da borda alveolar dos dentes ântero-inferiores de pacientes, que foram submetidos à projeção ortodôntica, com pacientes tratados sem projeção; e correlacionar estas modificações com o grau de inclinação dentária, com as alterações da distância bicanina e com o biotipo gengival. Pacientes adultos com mais de 3 mm de falta de espaço no arco inferior e curva de Spee moderada ou acentuada compuseram o grupo experimental (n=15). O grupo controle (n=7) consistiu de pacientes com bons arcos inferiores, que não necessitavam de grandes movimentos dentários. Estes pacientes foram submetidos a alinhamento e nivelamento dentário até o fio de aço .020". Tomografias computadorizadas de feixe cônico (TCFC) foram obtidas antes do tratamento e ao final da fase de alinhamento e nivelamento. As alturas das bordas alveolares (BA) de incisivos e caninos inferiores foram medidas nas TCFC em reconstruções 3D e comparadas entre os grupos e entre os tempos pelos testes-t de Student não pareado e pareado, respectivamente. As BA foram correlacionadas com o grau de inclinação dentária (IMPA), com a distância intercaninos (DIC) e com o biotipo gengival (BG) pelo teste de correlação de Pearson. Os resultados demonstraram que os caninos inferiores do grupo experimental apresentaram perda óssea significativa (p<0,005), quando comparados com o grupo controle, em média 2,5 mm. As BA dos dentes 43, 33 e 32 ao final do alinhamento e nivelamento eram significativamente maiores do que ao início do tratamento no grupo experimental (p<0,001). Não foram encontradas diferenças significativas entre as medidas iniciais e finais das BA de todos os dentes do grupo controle. Apesar destes resultados, não foram encontradas correlações entre a remodelação da BA e o IMPA, a DIC e o BG. Pode-se concluir que o aumento no comprimento do arco inferior com arcos ortodônticos contínuos aumenta a inclinação dos incisivos inferiores e a DIC. O aumento da DIC parece exercer maior efeito sobre a BA dos caninos inferiores do que a inclinação de incisivos sobre a BA dos incisivos inferiores. No entanto, as modificações da BA não estão associadas ao grau de inclinação dos incisivos, a quantidade de expansão do arco inferior e ao biotipo gengival.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este trabalho apresenta contribuições para algoritmos de controle utilizados em filtros ativos e híbridos conectados em redes elétricas trifásicas a 3 ou a 4 fios. Em relação aos algoritmos de controle para filtros ativos, a contribuição consiste em estender o conceito da filtragem harmônica seletiva para compensação de correntes harmônicas e desequilibradas em uma rede trifásica a 4 fios. Esses algoritmos derivam dos conceitos utilizados na teoria da potência instantânea (teoria pq), em conjunto com um circuito de sincronismo PLL. É importante ressaltar que estes algoritmos não utilizam as correntes consumidas pelas cargas, ou seja, apenas as tensões no ponto da rede onde o filtro está conectado são utilizadas para determinação das correntes harmônicas de referência. Apenas as correntes na saída do conversor são utilizadas como realimentação do controle PWM. Estes algoritmos também foram utilizados no filtro híbrido para compensação de correntes harmônicas em uma rede trifásica a 3 fios. Por fim foi feito uma alteração nesses algoritmos de controle que permite eliminar as correntes utilizadas na realimentação do controle PWM. Resultados de simulação são apresentados com objetivo de observar o comportamento desses algoritmos tanto no filtro ativo quanto no híbrido nas condições mencionadas.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A closed-loop control technique based on monitoring phase current risetime for switched reluctance (SR) motors without direct rotor-position sensors has been studied and implemented successfully. In this technique the variation in incremental phase inductance in a SR motor is used to detect rotor position. A control circuit for current-waveform-based rotor position detection has been implemented using hard-wire digital circuits. Torque-speed and system-efficiency characteristics resulting from the application of the method to a 4-kW, four-phase SR motor with an IGBT drive are presented.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Pacific threadfin (Polydactylus sexfilis) is considered one of the premier Hawaiian food fishes but even with catch limits, seasonal closures, and size limits, catches have declined dramatically since the 1960s. It was identified as the top candidate species for stock enhancement in Hawaii, based on the decline in stocks, high market value, and importance of the fishery. In the stock enhancement program for Pacific threadfin, over 430,000 fingerlings of various sizes were implanted with coded wire tags and released in nursery habitats along the windward coast of Oahu between 1993 and 1998. Because few Pacific threadfin were present in creel surveys conducted between 1994 and 1998, Oahu fishermen were offered a $10 reward for each threadfin that was caught (for both hatchery-reared and wild fish). A total of 1882 Pacific threadfin were recovered from the reward program between March 1998 and May 1999, including 163 hatchery-reared fish, an overall contribution of 8.7% to the fishery. Hatchery-reared fish accounted for as high as 71% of returns in the release areas. Hatchery-reared fish were recovered on average 11.5 km (SD=9.8 km) from the release site, although some had moved as far away as 42 km. Average age for recovered hatchery-reared fish was 495 days; the oldest was 1021 days. Cultured Pacific threadfin juveniles survived and recruited successfully to the recreational fishery, accounting for 10% of fishermen’s catches on the windward side of Oahu. Recruitment to the fishery was highest for the 1997 release year; few juveniles from earlier releases were observed. Presence of a few large, fully developed females in the recreational fishery suggested that hatchery-reared fish can survive, grow, and reproductively contribute to the population. Implementation of an enhancement program that is focused on juveniles and perhaps large females, as part of an integrated fishery management strategy, could speed the recovery of this fish population.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Young-of-year (YOY) blue-fish (Pomatomus saltatrix) along the U.S. east coast are often assumed to use estuaries almost exclusively during the summer. Here we present data from 1995 to 1998 indicating that YOY (30–260 mm FL) also use ocean habitats along the coast of New Jersey. An analysis of historical and recent data on northern and southern ocean beaches (0.1–2 m) and the inner continental shelf (5–27 m) during extensive sampling in New Jersey waters from 1995 to 1998 indicated that multiple cohorts occurred (June–August) in every year. When comparable collections of YOY were made in the ocean and in an adjacent estuary, the abundance was 1–2 orders of magnitude greater on ocean beaches during the summer. The YOY were even more abundant in ocean habitats in the fall (September–October), presumably as a result of YOY leaving estuaries to join the coastal migration south. During 1999 and 2000, YOY bluefish were tagged with internal sequential coded wire microtags in order to refine our under-standing of habitat use and movement. Few (0.04%) of the fish tagged on ocean beaches were recaptured; however, 2.2% of the fish tagged in the estuary were recaptured from 2 to 27 days after tagging. Recaptured fish grew quickly (average 1.37 mm FL/d). On ocean beaches YOY fed on a variety of invertebrates and fishes but their diet changed with size. By approximately 80–100 mm FL, they were piscivorous and fed primarily on engraulids, a pattern similar to that reported in estuaries. Based on distribution, abundance, and feeding, both spring- and summer-spawned cohorts of YOY bluefish commonly use ocean habitats. Therefore, attempts to determine factors affecting recruitment success based solely on estuarine sampling may be inadequate and further examination, especially of the contribution of the summer-spawned cohort in ocean habitats, appears warranted.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Variation at 13 microsatellite loci was previously surveyed in approximately 7400 chinook salmon (Oncorhynchus tshawytscha) sampled from 50 localities in the Fraser River drainage in southern British Columbia. Evaluation of the utility of the microsatellite variation for population-specific stock identification applications indicated that the accuracy of the stock composition estimates generally improved with an increasing number of loci used in the estimation procedure, but an increase in accuracy was generally marginal after eight loci were used. With 10–14 populations in a simulated fishery sample, the mean error in population-specific estimated stock composition with a 50-popula-tion baseline was <1.4%. Identification of individuals to specific populations was highest for lower Fraser River and lower and North Thompson River populations; an average of 70% of the individual fish were correctly assigned to specific populations. The average error of the estimated percentage for the seven populations present in a coded-wire tag sample was 2% per population. Estimation of stock composition in the lower river commercial net fishery prior to June is of key local fishery management interest. Chinook salmon from the Chilcotin River and Nicola River drainages were important contributors to the early commercial fishery in the lower river because they comprised approximately 50% of the samples from the net fishery prior to mid April.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Previously published measurements in a low-speed, single-stage, axial-flow turbine have been reanalyzed in the light of more recent understanding. The measurements include time-resolved hot-wire traverses and surface hot film gage measurements at the midspan of the rotor suction surface with three different rotor-stator spacings. This paper investigates the suction surface boundary layer transition process, using surface-distance time plots and boundary layer cross sections to demonstrate the unsteady and two-dimensional nature of the process.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In turbomachinery, a considerable proportion of the blade surface area can be covered by transitional boundary layers. This means that accurate prediction of the profile loss and boundary layer behavior in general depends on the accurate modeling of the transitional boundary layers, especially at low Reynolds numbers. This paper presents a model for determining the intermittency resulting from the unsteady transition caused by the passage of wakes over a blade surface. The model is founded on work by Emmons (1951) who showed that the intermittency could be calculated from a knowledge of the behavior of randomly formed turbulent spots. The model is used to calculate the development of the boundary layer on the rotor of a low Reynolds number single-stage turbine. The predictions are compared with experimental results obtained using surface-mounted hot-film anemometers and hot-wire traverses of the rotor midspan boundary layer at two different rotor-stator gaps. The validity and limitations of the model are discussed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This article presents a study of the development of the three-dimensional flowfield within the rotor blades of a low-speed, large-scale axial flow turbine. Measurements have been performed in the rotating and stationary frames of reference. Time-mean data have been obtained using miniature five-hole pneumatic probes, whereas the unsteady development of the flow has been determined using three-axis subminiature hot-wire anemometers. Additional information is provided by the results of blade-surface flow-visualization experiments and surface-mounted hot-film anemometers. The development of the stator exit flow, as it passes through the rotor blades, is described. Unsteady data suggest that the presence of the rotor secondary and tip leakage flows restricts the region of unsteady interaction to near midspan when the stator wakes and secondary flows are adjacent to the suction surface. Surface-mounted hot-film data show that this affects the suction-side laminar-turbulent transition process.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper describes an experimental investigation of tip clearance flow in a radial inflow turbine. Flow visualization and static pressure measurements were performed. These were combined with hot-wire traverses into the tip gap. The experimental data indicates that the tip clearance flow in a radial turbine can be divided into three regions. The first region is located at the rotor inlet, where the influence of relative casing motion dominates the flow over the tip. The second region is located towards midchord, where the effect of relative casing motion is weakened. Finally a third region exists in the exducer, where the effect of relative casing motion becomes small and the leakage flow resembles the tip flow behaviour in an axial turbine. Integration of the velocity profiles showed that there is little tip leakage in the first part of the rotor because of the effect of scraping. It was found that the bulk of tip leakage flow in a radial turbine passes through the exducer. The mass flow rate, measured at four chordwise positions, was compared with a standard axial turbine tip leakage model. The result revealed the need for a model suited to radial turbines. The hot-wire measurements also indicated a higher tip gap loss in the exducer of the radial turbine. This explains why the stage efficiency of a radial inflow turbine is more affected by increasing the radial clearance than by increasing the axial clearance.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper presents a study of the three-dimensional flow field within the blade rows of a high-pressure axial flow steam turbine stage. Compound lean angles have been employed to achieve relatively low blade loading for hub and tip section and so reduce the secondary losses. The flow field is investigated in a Low-Speed Research Turbine using pneumatic and hot-wire probes downstream of the blade row. Steady and unsteady numerical simulations were performed using structured 3D Navier-Stokes solver to further understand the flow field. Agreement between the simulations and the measurements has been found. The unsteady measurements indicate that there is a significant effect of the stator flow interaction in the downstream rotor blade. The transport of the stator viscous flow through the rotor blade row is described. Unsteady numerical simulations were found to be successful in predicting accurately the flow near the secondary flow interaction regions compared to steady simulations. A method to calculate the unsteady loss generated inside the blade row was developed from the steady numerical simulations. The contribution of various regions in the blade to the unsteady loss generation was evaluated. This method can assist the designer in identifying and optimizing the features of the flow that are responsible for the majority of the unsteady loss production. An analytical model was developed to quantify this effect for the vortex transport inside the downstream blade.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper presents a study of the three-dimensional flow field within the blade rows of a high-pressure axial flow steam turbine stage. Half-delta wings were fixed to a rotating hub to simulate an upstream rotor passage vortex. The flow field is investigated in a Low-Speed Research Turbine using pneumatic and hot-wire probes downstream of the blade row. The paper examines the impact of the delta wing vortex transport on the performance of the downstream blade row. Steady and unsteady numerical simulations were performed using structured 3D Navier-Stokes solver to further understand the flow field. The loss measurements at the exit of the stator blade showed an increase in stagnation pressure loss due to the delta wing vortex transport. The increase in loss was 21% of the datum stator loss, demonstrating the importance of this vortex interaction. The transport of the stator viscous flow through the rotor blade row is also described. The rotor exit flow was affected by the interaction between the enhanced stator passage vortex and the rotor blade row. Flow underturning near the hub and overturning towards the mid-span was observed, contrary to the classical model of overturning near the hub and underturning towards the mid-span. The unsteady numerical simulation results were further analysed to identify the entropy producing regions in the unsteady flow field.