Nuevo Modelo de Distribución de Corriente Contínua en Baja Tensión en Smart Buildings

En este trabajo se revisan una serie de conceptos, todos ellos relacionados con las microrredes de baja tensión de tipo de en corriente continua. Se exponen varias de las características propias de estas microrredes, diferentes tipos de cargas que alimentarían la microrred y posibles formas de conectar ésta al suministro. Se realiza un estudio de los niveles de potencia demandada más comunes, así como de las pérdidas en la red y las formas de evitar éstas, y cómo se generaría la corriente de la red de continua. Además, se exponen varios casos de estudios ya operativos sobre el modelo de continua.

Sustainability assessment of energy saving measures: A multi-criteria approach for residential buildings retrofitting—A case study of the Spanish housing stock

The building sector is well known to be one of the key energy consumers worldwide. The renovation of existing buildings provides excellent opportunities for an effective reduction of energy consumption and greenhouse gas emissions but it is essential to identify the optimal strategies. In this paper a multi-criteria methodology is proposed for the comparative analysis of retrofitting solutions. Life Cycle Assessment (LCA) and Life Cycle Cost (LCC) are combined by expressing environmental impacts in monetary values. A Pareto optimization is used to select the preferred strategies. The methodology is exemplified by a case study: the renovation of a representative housing block from the 1960s located in Madrid. Eight scenarios have been proposed, from the Business as Usual scenario (BAU), through Spanish Building Regulation requirements (for new buildings) up to the Passive House standard. Results show how current renovation strategies that are being applied in Madrid are far from being optimal solutions. The required additional investment, which is needed to obtain an overall performance improvement of the envelope compared with the common practice to date, is relatively low (8%) considering the obtained life cycle environmental and financial savings (43% and 45%, respectively).

El espejismo de un problema arquitectónico: sobre la exposición «Buildings for Best Products» en el MOMA de Nueva York

El espejismo de un problema arquitectónico: sobre la exposición «Buildings for Best Products» en el MOMA de Nueva York

Sistemas urbanos emergentes: procesos informales de gestión y producción de espacio público

Esta investigación analiza la capacidad del urbanismo de albergar sistemas emergentes de gestión urbana. El objetivo de esta tesis es describir estos procedimientos informales, realizando un exhaustivo recorrido a través de diversas experiencias de alteración del modo de gestión urbana al uso, para dar lugar a una sistematización de estos procesos que siente las bases para plantear nuevas formas de gestión urbana. Es decir, el fin no es tanto hacer una clasificación de las intervenciones más relevantes en materia urbana, sino descubrir su estructura, un orden para el desorden, una taxonomía en esas actuaciones que permita reformular las formas actuales de gestión de lo público. Se ha tratado de dibujar un mapa de oportunidades posibles en torno a la gestión del espacio urbano. A través de los procesos estudiados, esta investigación analiza los éxitos y fracasos obtenidos en los últimos cinco años de gestión alternativa de espacios vacantes, buscando extraer formulas susceptibles de incorporarse al modo actual de hacer ciudad. Este estudio pretende abordar un aspecto parcial, aunque fundamental del urbanismo, dando prioridad a lo público, sin la intención de negar el resto de formas del espacio urbano. Se concentra en los parámetros relativos a la interpretación de lo público: desatiende al conjunto urbano para descifrar ese fragmento. Así, el interés principal de esta tesis se concentra en la producción del espacio público. Al entender este ámbito como no exclusivo del urbanismo, otras actividades como el arte, la filosofía, la antropología o la sociología han aportado aspectos fundamentales dentro de esta investigación. De esta forma se ofrece un acercamiento poliédrico desde puntos de vista interdisciplinares, tratando de descubrir con rigor las posibilidades contrastadas de mejora del espacio urbano producido por los procesos emergentes de gestión informal de lo público. Mediante un metodología creada ex profeso (una estructura definida por tres líneas estratégicas: Gobernanza, Complejidad y Cohesión Social, que se desglosan en seis conceptos clave cada una) esta investigación analiza los aspectos relativos a la producción informal del espacio público de los sistemas emergentes. En relación con la Gobernanza, una parte de esta tesis se dedica al estudio de la informalidad, la transversalidad, la apropiación, la participación, la transparencia y las redes. La Complejidad se ha estudiado en su relación con la diversidad urbana, el uso sostenible del espacio público, la reactivación, la producción de espacio público, la ecología urbana y los procesos creativos. Para Cohesión Social se ha investigado la innovación en equipamientos, los procesos bottom-up, el rizoma, la identidad, los sistemas líquidos y el empoderamiento. Esta máquina para analizar se prueba en tres soportes urbanos: la escena urbana, los edificios-contenedores y los vacíos urbanos. Se han estudiado cinco situaciones urbanas en la ciudad de Madrid, seleccionados por ser las prácticas urbanas más relevantes de los últimos cinco años. Si bien este análisis nace de estos cincos casos, el modelo podría ser útil para otras investigaciones interesadas en los aspectos informales de la gestión urbana. Esta investigación se propone reclamar otras dimensiones más innovadoras que, si bien se escapan a los modos habituales de trabajar del urbanista, se revelan intensamente en los modos actuales de reclamar y producir espacio urbano. Se ha pretendido descubrir el espacio urbano como contenedor situacional del sentido público, potencial multiplicador de efectos funcionales como la gestión, la temporalidad, la participación, la rehabilitación, la multiplicidad de usos, la corrección del compacidad; efectos perceptuales y estéticos en la escena urbana; efectos políticos, de formación, de adquisición de poder; efectos sociales como la generación de nuevas redes, la creación de identidades. Se pretende que esta investigación arroje conclusiones que puedan tener aplicabilidad en la gestión y planificación del espacio público de ciudades y entornos urbanos inmersos a procesos semejantes. ABSTRACT This research examines the ability of urban planning to accommodate emerging urban management systems. The purpose of this thesis is to describe such informal procedures, by carrying out an exhaustive review across the different approaches to urban management, in order to systematize them as the basis for new ways of urban management. The aim is not, that is, to classify relevant urban interventions, but to recognize the intrinsic structure, an order for disorder, a taxonomy in those proceedings that could help reformulating existing forms of public management. The attempt has been to draw a map of possible opportunities around the management of urban space. Through the processes that have been the object of study, this research analyzes the successes and failures over the last five years of alternative management of vacant spaces, seeking to extract formulas that are likely to join the current way of making city. The focus of this urban study is the interpretation of public concepts, considered as key dimensions, not obliterating the other forms of urban space, but trying to make an in-depth analysis of this fragment within the global urban concept. Other activities intrinsically associated to public space generation, such as art, philosophy, anthropology or even sociology, are also contributing to this research. This interdisciplinary approach tries to enrich the research by recognizing the informal elements participating in emergent public management processes. The ex profeso devised methodology is structured by three main strategies: governance, complexity and Social Cohesiveness. Governance considers elements associated to informality, transversal dynamics, appropriation, participation, transparency and networking. Complexity encompasses elements of urban diversity, sustainable usage of public space, reactivation, urban space production, urban ecology and creative processes. Social Cohesiveness includes elements for equipment innovation, bottom-up processes, rhizome, identity, liquid systems and empowerment. This analyzing machine is tested on three urban scenarios: the urban scene, container buildings and empty spaces. Five relevant urban situations in Madrid have been selected, all of them developed in last five years, thus establishing the basis for other experiences of informal urban management. The result of the research, confirms the relevance of additional dimensions to traditional approaches for urban development. The urban space is recognized as a situational container of public sense and a potential multiplier of functional effects such as public management, temporality, participation, rehabilitation, multiplicity of uses, correction of compactness; perceptual and esthetic effects on the urban scene; politic effects, training, empowerment; social effects as generating new networks and identity creation. To sum up, the purpose of this thesis is to share the conclusions obtained by evaluating reference scenarios that could be applied in similar processes for cities and urban environment management and planning.

Postcard: Buildings of Lincoln University

https://bluetigercommons.lincolnu.edu/postcards/1005/thumbnail.jpg

Forensic analysis of buildings affected by mining subsidence based on Differential Interferometry (Part III)

This work presents a forensic analysis of buildings affected by mining subsidence, which is based on deformation data obtained by Differential Interferometry (DInSAR). The proposed test site is La Union village (Murcia, SE Spain) where subsidence was triggered in an industrial area due to the collapse of abandoned underground mining labours occurred in 1998. In the first part of this work the study area was introduced, describing the spatial and temporal evolution of ground subsidence, through the elaboration of a cracks map on the buildings located within the affected area. In the second part, the evolution of the most significant cracks found in the most damaged buildings was monitored using biaxial extensometric units and inclinometers. This article describes the work performed in the third part, where DInSAR processing of satellite radar data, available between 1998 and 2008, has permitted to determine the spatial and temporal evolution of the deformation of all the buildings of the study area in a period when no continuous in situ instrumental data is available. Additionally, the comparison of these results with the forensic data gathered in the 2005–2008 period, reveal that there is a coincidence between damaged buildings, buildings where extensometers register significant movements of cracks, and buildings deformation estimated from radar data. As a result, it has been demonstrated that the integration of DInSAR data into forensic analysis methodologies contributes to improve significantly the assessment of the damages of buildings affected by mining subsidence.

A methodology for evacuation route planning inside buildings using geospatial technology

Evacuation route planning is a fundamental task for building engineering projects. Safety regulations are established so that all occupants are driven on time out of a building to a secure place when faced with an emergency situation. As an example, Spanish building code requires the planning of evacuation routes on large and, usually, public buildings. Engineers often plan these routes on single building projects, repeatedly assigning clusters of rooms to each emergency exit in a trial-and-error process. But problems may arise for a building complex where distribution and use changes make visual analysis cumbersome and sometimes unfeasible. This problem could be solved by using well-known spatial analysis techniques, implemented as a specialized software able to partially emulate engineer reasoning. In this paper we propose and test an easily reproducible methodology that makes use of free and open source software components for solving a case study. We ran a complete test on a building floor at the University of Alicante (Spain). This institution offers a web service (WFS) that allows retrieval of 2D geometries from any building within its campus. We demonstrate how geospatial technologies and computational geometry algorithms can be used for automating the creation and optimization of evacuation routes. In our case study, the engineers’ task is to verify that the load capacity of each emergency exit does not exceed the standards specified by Spain’s current regulations. Using Dijkstra’s algorithm, we obtain the shortest paths from every room to the most appropriate emergency exit. Once these paths are calculated, engineers can run simulations and validate, based on path statistics, different cluster configurations. Techniques and tools applied in this research would be helpful in the design and risk management phases of any complex building project.

Radon gas. Environmental concentration measures and remediation actions in exposed buildings

The main contribution to the radiological impact from natural radiation received by general population is due to the emission of radon (222Rn). The objective of this project is the study of radon gas as a radioactive element in our buildings (existing and future constructions) to avoid its influence in interior rooms. The proposed methodology reflects different aspects of natural radioactivity in buildings, their sources, their control criteria and regulatory framework; aspects related to the presence of radon in our constructions, entryways, measurement methodology for indoor environmental concentration are studied; other protection solutions and remediation measures in both existing buildings and new construction projects are analyzed. In conclusion, the paper presents previous evaluation tools, the analysis of existing concentration and the choice of the most appropriate mitigation / remediation measures depending on each case, through the establishment of different architectural proposals to plan actions against radon where necessary.

Infrared termography application in energy audits of buildings

The main objectives of this research are (i) to determine the correct use of infrared thermography in the energy analysis of buildings and to verify its application in conducting energy audits thereof; (ii) to conduct a proposal for a standard methodology (with its corresponding final report) for energy audit of buildings based on currently applicable regulations, specifying the parts of the audit process where the authors propose to include thermal inspections by using infrared thermography.

Current Problems Involving the Dismantle of Asbestos- Cement Sheets in Buildings. The Case of Central Market in Alicante

The project and the works described in this article mainly deal with the removal of the current asbestos-cement covering of the roof of the Central Market in Alicante and its replacement with zinc diamond-shaped scales, similar to the originals which were implemented in 1921 when the building was put into service. These upgrades were necessary to avoid the causes (and consequences) of rainwater infiltration, as described in an earlier report in 2006, also drafted by the author of this article. The article illustrates the difficulties involving the practical application of Spanish Code RD 396/2006 (minimum safety and health requirements for work with risk of exposure to asbestos) in a complex case such as this, especially with regard to aspects such as economic (increasing costs), technical (increased difficulty of implementation), and the total duration of the work (total increase in duration due to interference with other trades).

How buildings visualise client and architect: The problem that today’s user is typically not the client

An article presented at the last ICAT- conference stated at the end that buildings at all times tend to picture the people who had them erected. This paper aims to show the correctness of that statement. To this end, it will examine a number of typical residential buildings dating from the beginning of the seventeenth century up to today, investigate who had the buildings erected, and relate that to the performance of the buildings. This relation analysis will mainly use the scale but also the degree of diversity in function and appearance as factors. Furthermore, using economic data and data on the buildings to identify patterns, it will investigate how size of the property and relative size of the capital interest behind the building has developed. Since the authors live in Copenhagen and Copenhagen is very typical in its historical development, buildings and environments in and around the centre of Copenhagen are used as examples.

How to measure healthiness in buildings: Experiences in teaching with BIM tools

Introducing teaching about healthy solutions in buildings and BIM has been a challenge for the University of Alicante. Teaching attached to very tighten study plans conditioned the types of methods that could be used in the past. The worldwide situation of crisis that especially reached Spain and the bursting of the housing bubble generated a lack of employment that reached universities where careers related to construction, Architecture and Architectural Technologist, suffered a huge reduction in the number of students enrolled. In the case of the University of Alicante, students’ enrolment for Architectural Technology reached an 80% reduction. The necessity of a reaction against this situation made the teachers be innovative and use the new Bologna adapted study plans to develop new teaching experiences introducing new concepts: people wellbeing in buildings and BIM. Working with healthy solutions in buildings provided new approaches for building design and construction as an alternative to sustainability. For many years sustainability was the concept that applied to housing gave buildings an added value and the possibility of having viability in a very complex scenario. But after lots of experiences, the approved methodologies for obtaining sustainable housing were ambiguous and at the end, investors, designers, constructors and purchasers cannot find real and validated criteria for obtaining an effective sustainable house. It was the moment to work with new ideas and concepts and start facing buildings from the users’ point of view. At the same time the development of new tools, BIM, has opened a wide range of opportunities, innovative and suggestive, that allows simulation and evaluation of many building factors. This paper describes the research in teaching developed by the University of Alicante to adapt the current study plans, introducing work with healthy solutions in buildings and the use of BIM, with the aim of attracting students by improving their future employability. Pilot experiences have been carried out in different subjects based on the work with projects and case studies under an international frame with the cooperation of different European partner universities. The use of BIM tools, introduced in 2014, solved the problems that appeared in some subjects, mainly building construction, and helped with the evaluation of some healthy concepts that presented difficulties until this moment as knowledge acquired by the students was hard to be evaluated. The introduction of BIM tools: Vasari, FormIt, Revit and Light Control among others, allowed the study of precise healthy concepts and provided the students a real understand of how these different parameters can condition a healthy architectural space. The analysis of the results showed a clear acceptance by the students and gave teachers the possibility of opening new research lines. At the same time, working with BIM tools to obtain healthy solutions in building has been a good option to improve students’ employability as building market in Spain is increasing the number of specialists in BIM with a wider knowledge.

Buildings records, bound volume, 1811-1838

This bound volume, likely assembled by the Corporation in the 1850s, contains documents related to Harvard buildings which have been pasted onto the pages. The volume consists of correspondence and memoranda pertaining to the construction of Holworthy Hall, 1811-1812; contracts and correspondence relating to the construction of University Hall, 1813-1814; and correspondence regarding repairs to Massachusetts Hall overseen by Loammi Baldwin in 1812. Additional records pertaining to the construction of Gore Hall, 1834-1838; and the repairs to the Medical College on Mason Street in Boston, 1824 are also located in this volume.

Plan of College buildings and lot from Mr. Bulfinch, [ca. 1814]

Known as the Bulfinch view, this proposed site plan of the College grounds by Charles Bulfinch depicts University Hall at the center of the drawing surrounded by Massachusetts, Harvard, Hollis, Stoughton, and Holworthy Halls. Several unlabeled buildings are displayed in the plan.