Comparative study of the Gaze Stabilization Test (GST) and the Dynamic Visual Acuity Test (DVAT) for detecting patients with unilateral vestibular dysfunction

This paper compares the use of two diagnostic tests, Gaze Stabilization Test (GST) and the Dynamic Visual Acuity Test (DVAT) to detect unilateral vestibular dysfunction.

Unleashing Competition in EU Business Services. CEPS Policy Brief No. 284, 24 September 2012

In most EU member states, the business services industry has booked no productivity growth during the last two decades. The industry’s performance in the other member states was weaker than that of its US counterparts. Exploring what may be causing this productivity stagnation, this policy brief reports that weak competition has contributed to the continuing malaise in European business services. The study analyzed the persistence (over time) of firm-level inefficiencies. The evidence further suggests that competition between small firms and large firms in business services is weak. Markets for business services work best in countries with flexible regulation on employment change and with low regulatory costs for firms that start up or close down a business. Countries that are more open to foreign competition perform better in terms of competitive selection and productivity. The policy simulations in this paper show that greater import openness strengthens competition in business services markets. The largest positive impact comes from lower regulatory barriers for growing and shrinking firms. More particularly, competitive selection would be fostered by a reduction of administrative and regulatory costs related to labour contracts, bankruptcy and start-up requirements. A key element of the European Commission’s Europe-2020 strategy is the Single European Market for Services. Business services form one of the largest industries in Europe – and given its productivity stagnation, it deserves to be a priority target of the Europe-2020 strategy. Improving the way the business services market functions may have large positive knock-on effects for the EU economy.

Velocity-based moving mesh methods for nonlinear partial differential equations

This article describes a number of velocity-based moving mesh numerical methods formultidimensional nonlinear time-dependent partial differential equations (PDEs). It consists of a short historical review followed by a detailed description of a recently developed multidimensional moving mesh finite element method based on conservation. Finite element algorithms are derived for both mass-conserving and non mass-conserving problems, and results shown for a number of multidimensional nonlinear test problems, including the second order porous medium equation and the fourth order thin film equation as well as a two-phase problem. Further applications and extensions are referenced.

Electron spin resonance study of puff-resolved free radical formation in mainstream cigarette smoke

Puff-by-puff resolved gas phase free radicals were measured in mainstream smoke from Kentucky 2R4F reference cigarettes using ESR spectroscopy. Three spin-trapping reagents were evaluated: PBN, DMPO and DEPMPO. Two procedures were used to collect gas phase smoke on a puff-resolved basis: i) the accumulative mode, in which all the gas phase smoke up to a particular puff was bubbled into the trap (i.e., the 5th puff corresponded to the total smoke from the 1st to 5th puffs). In this case, after a specified puff, an aliquot of the spin trap was taken and analysed; or, ii) the individual mode, in which the spin trap was analysed and then replaced after each puff. Spin concentrations were determined by double-integration of the first derivative of the ESR signal. This was compared with the integrals of known standards using the TEMPO free radical. The radicals trapped with PBN were mainly carbon-centred, whilst the oxygen-centred radicals were identified with DMPO and DEPMPO. With each spin trap, the puff-resolved radical concentrations showed a characteristic pattern as a function of the puff number. Based on the spin concentrations, the DMPO and DEPMPO spin traps showed better trapping efficiencies than PBN. The implication for gas phase free radical analysis is that a range of different spin traps should be used to probe complex free radical reactions in cigarette smoke.

Dual drive series actuator

Industrial robotic manipulators can be found in most factories today. Their tasks are accomplished through actively moving, placing and assembling parts. This movement is facilitated by actuators that apply a torque in response to a command signal. The presence of friction and possibly backlash have instigated the development of sophisticated compensation and control methods in order to achieve the desired performance may that be accurate motion tracking, fast movement or in fact contact with the environment. This thesis presents a dual drive actuator design that is capable of physically linearising friction and hence eliminating the need for complex compensation algorithms. A number of mathematical models are derived that allow for the simulation of the actuator dynamics. The actuator may be constructed using geared dc motors, in which case the benefits of torque magnification is retained whilst the increased non-linear friction effects are also linearised. An additional benefit of the actuator is the high quality, low latency output position signal provided by the differencing of the two drive positions. Due to this and the linearised nature of friction, the actuator is well suited for low velocity, stop-start applications, micro-manipulation and even in hard-contact tasks. There are, however, disadvantages to its design. When idle, the device uses power whilst many other, single drive actuators do not. Also the complexity of the models mean that parameterisation is difficult. Management of start-up conditions still pose a challenge.

Enhanced effects of combined cognitive bias modification and computerised cognitive behaviour therapy on social anxiety

This study examines whether combined cognitive bias modification for interpretative biases (CBM-I) and computerised cognitive behaviour therapy (C-CBT) can produce enhanced positive effects on interpretation biases and social anxiety. Forty socially anxious students were randomly assigned into two conditions, an intervention group (positive CBM-I + C-CBT) or an active control (neutral CBM-I + C-CBT). At pre-test, participants completed measures of social anxiety, interpretative bias, cognitive distortions, and social and work adjustment. They were exposed to 6 × 30 min sessions of web-based interventions including three sessions of either positive or neutral CBM-I and three sessions of C-CBT, one session per day. At post-test and two-week follow-up, participants completed the baseline measures. A combined positive CBM-I + C-CBT produced less negative interpretations of ambiguous situations than neutral CBM-I + C-CBT. The results also showed that both positive CBM-I + C-CBT and neutral CBM-I + C-CBT reduced social anxiety and cognitive distortions as well as improving work and social adjustment. However, greater effect sizes were observed in the positive CBM-I + C-CBT condition than the control. This indicates that adding positive CBM-I to C-CBT enhanced the training effects on social anxiety, cognitive distortions, and social and work adjustment compared to the neutral CBM-I + C-CBT condition.

Simulating startup shear of entangled polymer melts

Start-up shear rheology is a standard experiment used for characterizing polymer flow, and to test various models of polymer dynamics. A rich phenomenology is developed for behavior of entangled monodisperse linear polymers in such tests, documenting shear stress overshoots as a function of shear rates and molecular weights. A tube theory does a reasonable qualitative job at describing these phenomena, although it involves several drastic approximations and the agreement can be fortuitous. Recently, Lu and coworkers published several papers [e.g. Lu {\it et al.} {\it ACS Macro Lett}. 2014, 3, 569-573] reporting results from molecular dynamics simulations of linear entangled polymers, which contradict both theory and experiment. Based on these observations, they made very serious conclusions about the tube theory, which seem to be premature. In this letter, we repeat simulations of Lu {\it et al.} and systematically show that neither their simulation results, nor their comparison with theory are confirmed.

Individuell utprovning av inkontinenshjälpmedel i kommunala särskilda boenden

The purpose of this study was to examine the extent to which incontinence aids, used in local authority/municipal nursing homes, were adapted to the resident’s urine-leakage volume and to find out how nurses perceived the current situation concerning individual testing of incontinence aids in municipal nursing homes. The study method was a quantitative empirical study and was carried out in two phases. The first phase was a weighing test, carried out in three nursing homes, whereby the incontinence aids used by 25 residents during a 48 hour period were weighed. The second phase was the completion of a questionnaire by the municipal nurses working in the same local authority. The questionnaire covered: the division of responsibilities; routines for testing incontinence aids, and the level of knowledge concerning individual incontinence aid testing. Only 22 % of the pads used during the observation were properly adapted to the patients’ urinary leakage volume, while 76 % of incontinence aids were larger than necessary in relation to the real volume of urinary leakage. The municipal nurses, who have a key role and formal responsibility for individual incontinence aid testing, considered that there was insufficient knowledge within the organisation concerning individual incontinence aid testing, and that the division of responsibilities in this area was unclear. There were great variations relating to the extent of the nurses’ involvement in individual incontinence aid testing, and the nurses stated that increased involvement in individual incontinence aid testing was dependent on more time being made available for this task. Only a minority of the nurses thought that the requisitioning of incontinence aids was preceded by individual testing of the incontinence pads within the organisation. The majority of nurses considered that this was not the case or were unsure of the situation.

Dynamic softening of ferrite during large strain warm deformation of a plain-carbon steel

The evolution of dynamic ferrite softening in a plain-carbon steel was investigated by torsion tests during warm deformation at 810 °C, in the two-phase (ferrite + austenite) region, and strain rate of 0.1 s−1 with different strains up to 50. The warm flow behaviour and ferrite microstructural parameters, such as grain size, misorientation angle across ferrite/ferrite boundaries, and the fraction of high-angle and low-angle grain/subgrain boundaries were quantified using electron back scatter diffraction. The results show that with increasing strain up to not, vert, similar2, the ferrite grain size and fraction of high-angle boundaries rapidly decrease and the fraction of low-angle boundaries increases. However, these parameters remain approximately unchanged with increasing strain from not, vert, similar2 to 50. The dynamic softening mechanism observed during large strain ferritic deformation is explained by dynamic recovery and continuous dynamic recrystallization.

Cortisol interferes with the estradiol-induced surge of lutenizing hormone in the ewe

Two experiments were conducted to test the hypothesis that cortisol interferes with the positive feedback action of estradiol that induces the luteinizing hormone (LH) surge. Ovariectomized sheep were treated sequentially with progesterone and estradiol to create artificial estrous cycles. Cortisol or vehicle (saline) was infused from 2 h before the estradiol stimulus through the time of the anticipated LH surge in the artificial follicular phase of two successive cycles. The plasma cortisol increment produced by infusion was ∼1.5 times greater than maximal concentrations seen during infusion of endotoxin, which is a model of immune/inflammatory stress. In experiment 1, half of the ewes received vehicle in the first cycle and cortisol in the second; the others were treated in reverse order. All ewes responded with an LH surge. Cortisol delayed the LH surge and reduced its amplitude, but both effects were observed only in the second cycle. Experiment 2 was modified to provide better control for a cycle effect. Four treatment sequences were tested (cycle 1-cycle 2): vehicle-vehicle, cortisol-cortisol, vehicle-cortisol, cortisol-vehicle. Again, cortisol delayed but did not block the LH surge, and this delay occurred in both cycles. Thus, an elevation in plasma cortisol can interfere with the positive feedback action of estradiol by delaying and attenuating the LH surge.

Cost-effectiveness analysis of a two-stage screening intervention for hepatocellular carcinoma in Taiwan

Background/Purpose

Hepatocellular carcinoma (HCC) has been the leading cause of cancer death in Taiwan since the 1980s. A two-stage screening intervention was introduced in 1996 and has been implemented in a limited number of hospitals. The present study assessed the costs and health outcomes associated with the introduction of screening intervention, from the perspective of the Taiwanese government. The cost-effectiveness analysis aimed to assist informed decision making by the health authority in Taiwan.
Methods

A two-phase economic model, 1-year decision analysis and a 60-year Markov simulation, was developed to conceptualize the screening intervention within current practice, and was compared with opportunistic screening alone. Incremental analyses were conducted to compare the incremental costs and outcomes associated with the introduction of the intervention. Sensitivity analyses were performed to investigate the uncertainties that surrounded the model.
Results

The Markov model simulation demonstrated an incremental cost-effectiveness ratio (ICER) of NT$498,000 (US$15,600) per life-year saved, with a 5% discount rate. An ICER of NT$402,000 (US$12,600) per quality-adjusted life-year was achieved by applying utility weights. Sensitivity analysis showed that excess mortality reduction of HCC by screening and HCC incidence rates were the most influential factors on the ICERs. Scenario analysis also indicated that expansion of the HCC screening intervention by focusing on regular monitoring of the high-risk individuals could achieve a more favorable result.
Conclusion

Screening the population of high-risk individuals for HCC with the two-stage screening intervention in Taiwan is considered potentially cost-effective compared with opportunistic screening in the target population of an HCC endemic area.

Finding and filling the gaps in the Australian governments' innovation and entrepreneurship support spectra

A national innovation system is concerned with the full process of converting new knowledge into commercially viable results. Governments are policy-active in trying to create productive national innovation systems. This paper reviews ways of thinking about entrepreneurship as the commercialisation component of Australia’s innovation system. The paper explores the impact and relevance of selected existing Australian Commonwealth, and to a lesser extent State government, programs for the commercialisation channels so identified, using four frameworks for the analysis: financial, management/start-up, innovation and entrepreneurial. The analysis indicates program initiatives covering the later development and commercialization phases, but serious gaps in the support available for the entrepreneurship phase involving the act of new entry. This gap is covered by research provider business development people and to a limited extent by incubator and State government initiatives. A critical issue has been and is access to smaller amounts of seed finance. The critical human component is the education of public servants and politicians about the nature and operation of entrepreneurship.

Best practice angels: early-stage funding at Pasadena Angels

This 8-minute DVD (PAL standard in DVD-R format) looks into the workings of one of the oldest angel investing organizations. Pasadena Angels is a group of leading private investors that provide long-term human and financial capital to help build successful companies. Two start-up companies are profiled as they apply for funds. Directors and angel investors describe their funding criteria and discuss how a “best practice” angel operates. This video is appropriate for new angel groups, upper-level university courses, and general venture capital interest.

Comparing the small sample properties of two break Lagrange Multiplier unit root tests

In this note, we examine the size and power properties and the break date estimation accuracy of the Lee and Strazicich (LS, 2003) two break endogenous unit root test, based on two different break date selection methods: minimising the test statistic and minimising the sum of squared residuals (SSR). Our results show that the performance of both Models A and C of the LS test are superior when one uses the minimising SSR procedure.

Does dynamic vulcanization induce phase separation?

Immiscible and miscible blends of poly(vinylidene fluoride) (PVDF) and acrylic rubber (ACM) were subjected to dynamic vulcanization to investigate the effect of crosslinking on phase separation. As a result of different processability, mixing torque behavior of miscible and immiscible blends was significantly different from one another. Scanning electron microscopy (SEM) was used to investigate the morphology of the system. After dynamic vulcanization, submicron ACM droplets were observed in the samples near the binodal curve of the system under mixing conditions. Small angle X-ray scattering (SAXS) and differential scanning calorimetry (DSC) analysis were used to investigate the effect of dynamic vulcanization on the lamellar structure of the system. It was shown that for samples near the boundary of phase separation, increasing the crosslink density led to a decrease in the lamellar long period (L) as a sign of increment of crosslink density induced phase decomposition. Effects of shear rate on the final morphology of the system were investigated by changing the mixing temperature and by comparing the results of dynamic vulcanization at one phase and two phase regions.