Performance, carcass traits, meat quality and economic analysis of feedlot of young bulls fed oilseeds with and without supplementation of vitamin E

The objective of this research was to evaluate average daily gain (ADG), carcass traits, meat tenderness and profitability of keeping cattle fed different oilseeds and vitamin E in feedlot. A total of 40 Red Norte young bulls with initial average body weight of 339±15 kg were utilized. The experimental design was completely randomized in a 2 × 2 factorial arrangement. The experiment lasted 84 days and experimental diets presented soybeans or cottonseeds as lipid sources associated or not to daily supplementation of 2,500 UI vitamin E per animal. The concentrate:roughage ratio was 60:40. Diets had the same amount of nitrogen (13% CP) and ether extract (6.5%). The data were analyzed by means of statistical software SAS 9.1. Neither vitamin supplementation nor lipid source affected ADG. There was no interaction between lipid source and vitamin supplementation for the variables studied. The inclusion of cottonseed reduced the carcass yield. There was no effect of diets on hot and cold carcass weights or prime cuts. The inclusion of cottonseed reduced the backfat thickness. No effect of experimental diets on the rib-eye area was observed. There was no effect of lipid source or vitamin supplementation on meat tenderness, which was affected, however, by ageing time. Diets with soybeans presented higher cost per animal. The utilization of soybean implied reduction of the gross margin (R$ 59.17 and R$ 60.51 for diets based on soy with and without supplemental vitamin, respectively, vs. R$ 176.42 and R$ 131.79 for diets based on cottonseed). The utilization of cottonseed enables improvement of profitability of feedlot fattening, in spite of negatively affecting some carcass characteristics.

Correlations between preweaning traits in Duroc swine

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Genetic and phenotypic trends for growth traits of buffaloes in Brazil

The objectives this paper were to estimate genetic parameters and genetic and phenotypic trends of birth weight (BWT) and weights adjusted to 205 (WT205), 365 (WT365) and 550 (P550) days of age of beef buffaloes born from 1985 to 2003 in Brazil. For BWT and WT205 the model included direct and maternal genetic and maternal environment as random effects and contemporary and genetic groups as fixed effects. For WT365 and WT550 the same model was used except without direct maternal and maternal environmental effects. The genetic and phenotypic trends were estimated by regression of means of dependent variables on birth year of animals Regressions were obtained by using two methodologies: 1) linear regression; and 2) non-parametric splined regression. The direct heritability estimates were 0.09, 0.45, 0.46 and 0.58 for BWT, WT205, WT365 and WT550, respectively. The direct genetic trends from linear regression were 0.01, 0.23, 0.58 and 1.40 kg per year for PN, WT205, VVT365 and WT550, respectively (P<0.001 for all). Phenotypic trends were strongly positive while genetic trends were consistently positive but small. Genetic parameters indicate potential for increased rate of genetic change with full implementation of genetic improvement programs.

Genetic evaluation of performance traits in Brazilian Quarter Horse

The aim of this study was to estimate genetic parameters for racing performance traits in Quarter Horses in Brazil. The data (provided by the Sorocaba Jockey Club) came from 3 Brazilian hippodromes in 1994-2003, with 11875 observations of race time and 7775 of the speed index (Sl), distributed in 2403 and 2169 races, respectively. The variance components were estimated by the MTGSAM program, under animal models including the random additive genetic effect, random permanent environmental effect, and the fixed effects of sex, age and race. Heritabilities for race time and the SI, for the 3 distances studied (301, 365 and 402 in), varied from 0.26 to 0.41 and from 0. 14 to 0. 19, respectively, whereas repeatabilities varied from 0.36 to 0.68 (time) and from 0.27 to 0.42 (SI) and the genetic correlations from 0.90 to 0.97 (time) and from 0.67 to 0.73 (SI).

Univariate and bivariate distribution of growth traits in beef buffaloes from Brazil

The aim of this study was to analyze the weight at birth (BW) and adjusted at 205 (W205), 365 (W365) and 550 (W55O) days in beef buffaloes from Brazil, using two approaches: parametric, by normal distribution, and non-parametric, by kernel function, and thus estimating the genetic, environmental and phenotypic correlation among traits. Information of 5,169 animals at birth (BW), 3,792 at 205 days (W205), 3.883 at 365 days (W365) and 1,524 at 550 days of age (W550) were used. The birth weight distribution presented an evident discrepancy in relation to the normal distribution. However, W205, W365 and W550 presented normal distributions. The birth weight presented weak genetic, environmental, and phenotypic associations with the other weight measurements. on the other hand, the weight traits at 205, 365, 550 days of age showed a high genetic correlation.

Growth, carcass and meat quality traits of straightbred and crossbred Botucatu rabbits

The objective was to evaluate the effects of genetic group and age on growth, carcass, and meat traits of rabbits. A total of 144 straightbred Botucatu and White German Giant x Botucatu crossbred rabbits were involved. Rabbits were weaned at 35 d and sequentially, slaughtered, four per genetic group x sex combination, at: 42, 49, 56, 63, 70, 77, 84 and 91 d. A 2x2 factorial arrangement was employed in a completely randomized design with repeated measures for growth traits, and a split-plot for carcass and meat traits. Crossbred rabbits were heavier (2032 vs. 1962 g; P < 0.01), consumed more feed (143.5 vs. 131.0 g/d; P < 0.01), and presented higher slaughter weight (2169 vs. 2093 g, P=0.02) and dressing percentage (59.0 vs. 58.2%; P=0.07) than straightbreds throughout the experiment. No difference between genetic groups was detected for feed conversion and empty gastrointestinal weight corrected for slaughter weight (SW). Crossbreds showed higher skin weight (308.2 vs. 299.7 g, P = 0.06) and distal parts of leg weight (75.7 vs. 71.4 g; P < 0.01), both corrected for SW. No genetic group effect was detected on dissectible fat and hind part weights. Chilled commercial carcass (1284 vs. 1229 g: P=0.02), chilled reference carcass (1036 vs. 1000 g, P=0.06), fore part (297.9 vs. 283.3 g; P=0.01) and loin (308.7 vs. 295.5 g; P=0.05) were heavier in crossbreds than in straightbreds, but these differences were attributed to differences in SW. Uncorrected weights of head, kidneys, liver and thoracic viscera were higher in the crossbred group, but only head (116.6 vs. 113.6 g; P=0.06) and thoracic viscera (30.4 vs. 28.6 g; P=0.01) were, in fact, proportionately heavier in crossbreds than in straightbreds. No effect of genetic group was detected on meat to bone ratio, muscle ultimate pH and chemical composition of the Longissimus dorsi muscle. All traits, except for ash and fat contents of the Longissimus muscle, showed age effects (P < 0.01). Crossbreeding may be recommended for the production of whole commercial carcasses, but it is not clearly advantageous for the production of retail cuts. Slaughter should take place between 63 and 70 d of age for both genetic groups.

Inbreeding and its effects on some productive and reproductive traits in a Murrah buffalo herd

Data concerning genealogy, milk yield, lactation length, caving interval and lac at first calving, obtained from Murrah buffaloes on a farm In São Paulo state, Brazil, were studied in order to determine the presence of inbreeding in the herd and to evaluate its effects as well as the effects of some environmental factors on productive and reproductive traits. The mean inbreeding coefficient estimated for 2414 animals, born from 1965 to 1995 was 2.94%. of these animals, 47% mere considered inbred with a mean inbreeding coefficient equal 6.25%. Milk production, lactation length, calving interval and age at first calving averaged 1493.3 +/- 60.7 kg, 271.0 +/- 37.3 days, 385.0 +/- 53.4 days and 33.05 +/- 6.05 months, respectively. Among all four traits, only lactation length was affected by inbreeding.

Mapping QTLs on chicken chromosome 1 for performance and carcass traits in a broiler x layer cross

With the objective of mapping quantitative trait loci (QTLs) for performance and carcass traits, an F-2 chicken population was developed by crossing broiler and layer lines. A total of 2063 F-2 chicks in 21 full-sib families were reared as broilers and slaughtered at 42 days of age. Seventeen performance and carcass traits were measured. Parental (F-0) and F-1 individuals were genotyped with 80 microsatellites from chicken chromosome 1 to select informative markers. Thirty-three informative markers were used for selective genotyping of F-2 individuals with extreme phenotypes for body weight at 42 days of age (BW42). Based on the regions identified by selective genotyping, seven full-sib families (649 F-2 chicks) were genotyped with 26 markers. Quantitative trait loci affecting body weight, feed intake, carcass weight, drums and thighs weight and abdominal fat weight were mapped to regions already identified in other populations. Quantitative trait loci for weights of gizzard, liver, lungs, heart and feet, as well as length of intestine, not previously described in the literature were mapped on chromosome 1. This F-2 population can be used to identify novel QTLs and constitutes a new resource for studies of genes related to growth and carcass traits in poultry.

Correlations among carcass traits taken by ultrasound and after slaughter in Mediterranean (Bubalus bubalis) young bulls

The objective of this work was to estimate the correlations among measurements taken in vivo with ultrasound equipment with some carcass traits measured after slaughter. Twenty eight Mediterranean bulls, with average shrunk body weight of 330 kg and 14 months of age, were fed by 120 days with high concentrate diets. The shrunk body weight, the ribeye area (REAU), the back fat thickness (FTU) over the Longissimus dorsi muscle between 12(a) and 13(a) ribs and rump fat (EGP8U), were measured at 28 days intervals. Real-time ultrasound equipment Piemedical Scanner 200 VET, with 18 cm linear array transducer was utilized. After the slaughter, the hot carcass weight (PCQ) and the kidney, pelvic and inguinal fat (GRPI) were weighted and the dressing percentage (DP) calculated. After 24 hours of cooling the ribeye area (REAC), backfat thickness (FTC) and rump fat (EGP8C) were measured. Both the REAC, FTC and EGP8C were underestimated by ultrasound measurements. The Pearson correlation coefficients for ribeye area, backfat thickness and rump fat measured in the carcass and with ultrasound, were 0.96, 0.99 and 0.91, respectively. The coefficient between DP and REAU was 0.47; 0.45 between DP and REAC, 0.56 between DP and FTU and 0.58 between DP and FTC. DP presented a 0.59 correlation coefficient with EGP8U. The Spearman correlation was estimated between REAU and REAC, FTU and FTC, EGP8U and EGP8C, and the values were 0.96, 0.99 and 0.91,respectively. The ultrasound measures could be used to estimate carcass traits in buffaloes with good accuracy.