Individuals' Responsibility in Corporations

I discuss role responsibly, individual responsibility and collective responsibility in corporate multinational setting. My case study is about minerals used in electronics that come from the Democratic Republic of Congo. What I try to show throughout the thesis is how many things need to be taken into consideration when we discuss the responsibility of individuals in corporations. No easy and simple answers are available. Instead, we must keep in mind the complexity of the situation at all times, judging cases on individual basis, emphasizing the importance of individual judgement and virtue, as well as the responsibility we all share as members of groups and the wider society. I begin by discussing the demands that are placed on us as employees. There is always a potential for a conflict between our different roles and also the wider demands placed on us. Role demands are usually much more specific than the wider question of how we should act as human beings. The terminology of roles can also be misleading as it can create illusions about our work selves being somehow radically separated from our everyday, true selves. The nature of collective decision-making and its implications for responsibility is important too. When discussing the moral responsibility of an employee in a corporate setting, one must take into account arguments from individual and collective responsibility, as well as role ethics. Individual responsibility is not a separate or competing notion from that of collective responsibility. Rather, the two are interlinked. Individuals' responsibilities in collective settings combine both individual responsibility and collective responsibility (which is different from aggregate individual responsibility). In the majority of cases, both will apply in various degrees. Some members might have individual responsibility in addition to the collective responsibility, while others just the collective responsibility. There are also times when no-one bears individual moral responsibility but the members are still responsible for the collective part. My intuition is that collective moral responsibility is strongly linked to the way the collective setting affects individual judgements and moulds the decisions, and how the individuals use the collective setting to further their own ends. Individuals remain the moral agents but responsibility is collective if the actions in question are collective in character. I also explore the impacts of bureaucratic ethic and its influence on the individual. Bureaucracies can compartmentalize work to such a degree that individual human action is reduced to mere behaviour. Responsibility is diffused and the people working in the bureaucracy can come to view their actions to be outside the normal human realm where they would be responsible for what they do. Language games and rules, anonymity, internal power struggles, and the fragmentation of information are just some of the reasons responsibility and morality can get blurry in big institutional settings. Throughout the thesis I defend the following theses: ● People act differently depending on their roles. This is necessary for our society to function, but the more specific role demands should always be kept in check by the wider requirements of being a good human being. ● Acts in corporations (and other large collectives) are not reducible to individual actions, and cannot be explained fully by the behaviour of individual employees. ● Individuals are responsible for the actions that they undertake in the collective as role occupiers and are very rarely off the hook. Hiding behind role demands is usually only an excuse and shows a lack of virtue. ● Individuals in roles can be responsible even when the collective is not. This depends on if the act they performed was corporate in nature or not. ● Bureaucratic structure affects individual thinking and is not always a healthy environment to work in. ● Individual members can share responsibility with the collective and our share of the collective responsibility is strongly linked to our relations. ● Corporations and other collectives can be responsible for harm even when no individual is at fault. The structure and the policies of the collective are crucial. ● Socialization plays an important role in our morality at both work and outside it. We are all responsible for the kind of moral context we create. ● When accepting a role or a position in a collective, we are attaching ourselves with the values of that collective. ● Ethical theories should put more emphasis on good judgement and decision-making instead of vague generalisations. My conclusion is that the individual person is always in the centre when it comes to responsibility, and not so easily off the hook as we sometimes think. What we do, and especially who we choose to associate ourselves with, does matter and we should be more careful when we choose who we work for. Individuals within corporations are responsible for choosing that the corporation they associate with is one that they can ascribe to morally, if not fully, then at least for the most part. Individuals are also inclusively responsible to a varying degree for the collective activities they contribute to, even in overdetermined contexts. We all are responsible for the kind of corporations we choose to support through our actions as consumers, investors and citizens.

The Commercial Structure of Pedestrian Streets and Shopping Districts - Three Cases from Finland

Kävelykadut ovat tunnustettu tapa elävöittää keskusta-alueiden kauppaa. Aluksi moni kauppias epäilee kävelykadun tuomia muutoksia, mutta kokemus osoittaa, että kävelykadut ovat olleet menestyksekkäitä ja nostavat siellä olevien yritysten myyntiä. Jotkut yritykset eivät kuitenkin hyödy kävelykaduista, kun taas toiset hyötyvät paljon kun katu muuttuu kävelykaduksi. Tämä pro gradu -tutkielma tutkii kävelykatujen kaupallista rakennetta, jotta saataisiin selville minkätyyppiset yritykset löytyvät kävelykadulta. Tuloksia verrataan sen kaupallisen keskusvyöhykkeen kaupalliseen rakenteeseen missä kävelykatu sijaitsee. Näin saadaan selville erot kaupallisessa rakenteessa. Pro gradu tutkii myös miten tavallisia ketjuyritykset ovat kävelykaduilla ja kaupallisissa keskusvyöhykkeissä. Tutkimusaineisto koottiin kaupallisen inventoinnin avulla, joka suoritettiin kolmessa suomalaisessa kaupungissa: Tammisaaressa, Keravalla ja Porissa. Saatu aineisto luokiteltiin ja tulokset piirrettiin kartalle. Perustilastollisia menetelmiä käytettiin tulosten analysoimisessa. Tulokset eriteltiin kävelykadun, kauppakeskusten ja muiden paikkojen osalta ja luokiteltiin yleisluokkiin vähittäiskauppa, ravintola ja muu palvelu. Tulokset näyttävät, että on olemassa selkeitä eroja kun vertaa kävelykatuja ja kaupallisia keskusvyöhykkeitä. Kävelykaduilla on paljon enemmän vähittäiskauppoja, etenkin muotikauppoja, kuin muilla kaduilla. Kauppakeskuksilla on samantapainen kaupallinen rakenne kuin kävelykaduilla kun taas muilla kaduilla esiintyy vähemmän vähittäiskauppoja ja enemmän palveluyrityksiä. Ravintolat ovat melkein yhtä tavallisia koko kaupallisessa keskusvyöhykkeessä. Ketjuyritysten osalta tulokset ovat epäselviä. On olemassa osviittaa siitä, että ne ovat tavallisempia kävelykaduilla, etenkin suurissa kaupungeissa. Saatua tulosta ei ole kuitenkin tarpeeksi, jotta varmaa tietoa olisi saatu. Viimeisten 10–15 vuoden ajan Suomen kävelykadut ovat muuttuneet enemmän ravintolavaltaisiksi muiden palveluiden kustannuksella. Vähittäiskauppojen määrä on pysynyt vakaana. Suomalaiset kävelykadut eroavat kaupalliselta rakenteeltaan pohjoismaisista kävelykaduista, joilla on enemmän vähittäiskauppoja ja vähemmän palveluyrityksiä. Tapauskohtaisissa tuloksissa esiintyy paljon eroavaisuuksia. Paikalliset tekijät ovat usein voimakkaampia kuin yleiset teoriat kauppojen sijainnista kävelykaduilla. Yleisesti ottaen tulokset tukevat teoreettista viitekehystä. Tulokset antavat tarkempaa tietoa kävelykatujen ja kaupallisten keskusvyöhykkeiden kaupallisesta rakenteesta ja siitä, mitkä tekijät tähän vaikuttaa.

A survey of indian logic from the point of view of computer science

Indian logic has a long history. It somewhat covers the domains of two of the six schools (darsanas) of Indian philosophy, namely, Nyaya and Vaisesika. The generally accepted definition of Indian logic over the ages is the science which ascertains valid knowledge either by means of six senses or by means of the five members of the syllogism. In other words, perception and inference constitute the subject matter of logic. The science of logic evolved in India through three ages: the ancient, the medieval and the modern, spanning almost thirty centuries. Advances in Computer Science, in particular, in Artificial Intelligence have got researchers in these areas interested in the basic problems of language, logic and cognition in the past three decades. In the 1980s, Artificial Intelligence has evolved into knowledge-based and intelligent system design, and the knowledge base and inference engine have become standard subsystems of an intelligent system. One of the important issues in the design of such systems is knowledge acquisition from humans who are experts in a branch of learning (such as medicine or law) and transferring that knowledge to a computing system. The second important issue in such systems is the validation of the knowledge base of the system i.e. ensuring that the knowledge is complete and consistent. It is in this context that comparative study of Indian logic with recent theories of logic, language and knowledge engineering will help the computer scientist understand the deeper implications of the terms and concepts he is currently using and attempting to develop.

A new model for drainage of static foams

Existing theories of foam drainage assume bubbles as pentagonal dodecahedrons, though a close-packed structure built with cells of this shape is not space-filling. The present work develops a theory for calculating drainage rates based on the more realistic beta-tetrakaidecahedral shape for the bubbles. In contrast with the earlier works, three types of films, and Plateau borders had to be considered in view of the more complex shape used in the present work. The exchange of liquid between Plateau borders was treated in a way different From earlier theories, using the idea that the volume of junctions of Plateau borders is negligible. For foams made of large bubble sizes, the present model performs as well as the previous models, but when bubble size is small, its predictions of drainage rates from static foams are in better agreement with the experimental observations.

Mechanistic approach to the shear strength behaviour of allophanic soils

The presence of allophane minerals imparts special engineering features to the volcanic ash soils. This study examines the reasons for the allophanic soils exhibiting unusual shear strength properties in comparison to sedimentary clays. The theories of residual shear strength developed for natural soils and artificial soil mixtures and the unusual surface charge properties of the allophane particle are invoked to explain the high shear strength values of these residual soils. The lack of any reasonable correlation between phi' (effective stress-strength parameter) and plasticity index values for allophanic soils is explained on the basis of the unusual structure of the allophane particle. The reasons as to why natural soil slopes in allophanic soil areas (example, Dominica, West Indies) are stable at much steeper angles than natural slopes in sedimentary clay deposits (London clay areas) are explained in light of the hypothesis developed in this study.

Study of the dynamics of protein folding through minimalistic models

Starting with the Levinthal paradox, a brief introduction to the protein folding problem is presented. The existing theories of protein folding, including the folding funnel scenario, are discussed. After briefly discussing different simulation studies of model proteins, we discuss our recent work on the dynamics of folding of the model HP-36 (the chicken villin headpiece) protein by using a simplified hydropathy scale. Special attention has been paid to the statics and dynamics of contact formation among the hydrophobic residues. The results obtained from this simple model appear to be surprisingly similar to several features observed in the folding of real proteins. The account concludes with a discussion of future problems.

A relook at Reissner's theory of plates in bending

Shear deformation and higher order theories of plates in bending are (generally) based on plate element equilibrium equations derived either through variational principles or other methods. They involve coupling of flexure with torsion (torsion-type) problem and if applied vertical load is along one face of the plate, coupling even with extension problem. These coupled problems with reference to vertical deflection of plate in flexure result in artificial deflection due to torsion and increased deflection of faces of the plate due to extension. Coupling in the former case is eliminated earlier using an iterative method for analysis of thick plates in bending. The method is extended here for the analysis of associated stretching problem in flexure.

Direct measurements of growing amorphous order and non-monotonic dynamic correlations in a colloidal glass-former

The transformation of flowing liquids into rigid glasses is thought to involve increasingly cooperative relaxation dynamics as the temperature approaches that of the glass transition. However, the precise nature of this motion is unclear, and a complete understanding of vitrification thus remains elusive. Of the numerous theoretical perspectives(1-4) devised to explain the process, random first-order theory (RFOT; refs 2,5) is a well-developed thermodynamic approach, which predicts a change in the shape of relaxing regions as the temperature is lowered. However, the existence of an underlying `ideal' glass transition predicted by RFOT remains debatable, largely because the key microscopic predictions concerning the growth of amorphous order and the nature of dynamic correlations lack experimental verification. Here, using holographic optical tweezers, we freeze a wall of particles in a two-dimensional colloidal glass-forming liquid and provide direct evidence for growing amorphous order in the form of a static point-to-set length. We uncover the non-monotonic dependence of dynamic correlations on area fraction and show that this non-monotonicity follows directly from the change in morphology and internal structure of cooperatively rearranging regions(6,7). Our findings support RFOT and thereby constitute a crucial step in distinguishing between competing theories of glass formation.

Dynamics of Glass Forming Liquids with Randomly Pinned Particles

It is frequently assumed that in the limit of vanishing cooling rate, the glass transition phenomenon becomes a thermodynamic transition at a temperature T-K. However, with any finite cooling rate, the system falls out of equilibrium at temperatures near T-g(> T-K), implying that the very existence of the putative thermodynamic phase transition at T-K can be questioned. Recent studies of systems with randomly pinned particles have hinted that the thermodynamic glass transition may be observed for liquids with randomly pinned particles. This expectation is based on the results of approximate calculations that suggest that the thermodynamic glass transition temperature increases with increasing concentration of pinned particles and it may be possible to equilibrate the system at temperatures near the increased transition temperature. We test the validity of this prediction through extensive molecular dynamics simulations of two model glass-forming liquids in the presence of random pinning. We find that extrapolated thermodynamic transition temperature T-K does not show any sign of increasing with increasing pinning concentration. The main effect of pinning is found to be a rapid decrease in the kinetic fragility of the system with increasing pin concentration. Implications of these observations for current theories of the glass transition are discussed.

A Generalization of Gravity

I consider theories of gravity built not just from the metric and affine connection, but also other (possibly higher rank) symmetric tensor(s). The Lagrangian densities are scalars built from them, and the volume forms are related to Cayley's hyperdeterminants. The resulting diff-invariant actions give rise to geometric theories that go beyond the metric paradigm (even metric-less theories are possible), and contain Einstein gravity as a special case. Examples contain theories with generalizeations of Riemannian geometry. The 0-tensor case is related to dilaton gravity. These theories can give rise to new types of spontaneous Lorentz breaking and might be relevant for ``dark'' sector cosmology.

Use of polydispersity index as control parameter to study melting/freezing of Lennard-Jones system: Comparison among predictions of bifurcation theory with Lindemann criterion, inherent structure analysis and Hansen-Verlet rule

Using polydispersity index as an additional order parameter we investigate freezing/melting transition of Lennard-Jones polydisperse systems (with Gaussian polydispersity in size), especially to gain insight into the origin of the terminal polydispersity. The average inherent structure (IS) energy and root mean square displacement (RMSD) of the solid before melting both exhibit quite similar polydispersity dependence including a discontinuity at solid-liquid transition point. Lindemann ratio, obtained from RMSD, is found to be dependent on temperature. At a given number density, there exists a value of polydispersity index (delta (P)) above which no crystalline solid is stable. This transition value of polydispersity(termed as transition polydispersity, delta (P) ) is found to depend strongly on temperature, a feature missed in hard sphere model systems. Additionally, for a particular temperature when number density is increased, delta (P) shifts to higher values. This temperature and number density dependent value of delta (P) saturates surprisingly to a value which is found to be nearly the same for all temperatures, known as terminal polydispersity (delta (TP)). This value (delta (TP) similar to 0.11) is in excellent agreement with the experimental value of 0.12, but differs from hard sphere transition where this limiting value is only 0.048. Terminal polydispersity (delta (TP)) thus has a quasiuniversal character. Interestingly, the bifurcation diagram obtained from non-linear integral equation theories of freezing seems to provide an explanation of the existence of unique terminal polydispersity in polydisperse systems. Global bond orientational order parameter is calculated to obtain further insights into mechanism for melting.

Analysis of indentation loading curves obtained using conical indenters

Using dimensional analysis and finite-element calculations we determine the functional form of indentation loading curves for a rigid conical indenter indenting into elastic-perfectly plastic solids. The new results are compared with the existing theories of indentation using conical indenters, including the slip-line theory for rigid-plastic solids, Sneddon's result for elastic solids, and Johnson's model for elastic-perfectly plastic solids. In the limit of small ratio of yield strength (Y) to Young's modulus (E), both the new results and Johnson's model approach that predicted by slip-line theory for rigid-plastic solids. In the limit of large Y/E, the new results agree with that for elastic solids. For a wide range of Y/E, some difference is found between Johnson's model-and the present result. This study also demonstrates the possibilities and limitations of using indentation loading curves to extract fundamental mechanical properties of solids.

La moral y los modelos de optimización económica : una reflexión acerca de la antropología en la teoría económica neoclásica

Resumen: Luego de la crisis financiera global de 2008, el blindaje conceptual del paradigma neoclásico, edificado sobre un atractivo formalismo matemático, ha dejado entrever sus falencias. En ese contexto, este artículo plantea la necesidad de revisar sus fundamentos, en especial la concepción antropológica y la metodología que subyace detrás del modelo. El autor analiza al mainstream como un modelo reduccionista de la naturaleza humana, y postula la necesidad de modificar el rumbo de la ciencia económica hacia una dirección personalista, enfocada en el bienestar social de las personas, que considere la importancia de la moral en la toma de decisiones. Asimismo, el economista debería desarrollar su trabajo desde una perspectiva reflexiva y de diálogo con el resto de las ciencias sociales.

¿Existe una gradualidad inherente a la ley moral?

La Familiaris consortio n.34 definió la “ley de la gradualidad”, como cumplimiento progresivo de la ley moral, contraponiéndola a la “gradualidad de la ley”, la cual es considerada como una expresión del rechazo al carácter vinculante de la misma. Pero no es éste el único modo posible de concebir la gradualidad de la ley. Santo Tomás presenta en la Suma Teológica un ejemplo de gradualidad de la ley (civil), a partir del cual este estudio se propone mostrar que existe una gradualidad inherente a la ley moral, que, sin privar a ésta de su fuerza obligatoria, le permite adaptarse dinámicamente al desarrollo moral del sujeto.

Aristóteles y Tomás de Aquino en torno al tratamiento de la materia moral

Resumen: El presente trabajo tiene por objeto puntualizar determinadas diferencias doctrinales que se advierten en el modo en que Aristóteles y, por su parte, Tomás de Aquino abordan el estudio relacionado con el tema específico del comportamiento moral. Por medio de un registro analítico y descriptivo y de una lectura a la vez interpretativa y crítica de las fuentes y la bibliografía especializada, se intenta precisar ciertas particularidades que distinguen los presupuestos sobre cuya base ambos filósofos elaboran sus respectivos discursos. Esto último permite observar en qué medida el Aquinate se hace cargo del saber aristotélico acerca del bien humano y resuelve, por lo demás, de un modo satisfactorio las diversas aporías a que conduce ese mismo planteo.