The brain’s fingers and hands

The brain keeps track of the changing positions of body parts in space using a spatial body schema. When subjects localise a tactile stimulus on the skin, they might either use a somatotopic body map, or use a body schema to identify the location of the stimulation in external space. Healthy subjects were touched on the fingertips, with the hands in one of two postures: either the right hand was vertically above the left, or the fingers of both hands were interwoven. Subjects made speeded verbal responses to identify either the finger or the hand that was touched. Interweaving the fingers significantly impaired hand identification across several experiments, but had no effect on finger identification. Our results suggest that identification of fingers occurs in a somatotopic representation or finger schema. Identification of hands uses a general body schema, and is influenced by external spatial location. This dissociation implies that touches on the finger can only be identified with a particular hand after a process of assigning fingers to hands. This assignment is based on external spatial location. Our results suggest a role of the body schema in the identification of structural body parts from touch.

Visual enhancement of touch in spatial body representation

Perception of our own bodies is based on integration of visual and tactile inputs, notably by neurons in the brain’s parietal lobes. Here we report a behavioural consequence of this integration process. Simply viewing the arm can speed up reactions to an invisible tactile stimulus on the arm. We observed this visual enhancement effect only when a tactile task required spatial computation within a topographic map of the body surface and the judgements made were close to the limits of performance. This effect of viewing the body surface was absent or reversed in tasks that either did not require a spatial computation or in which judgements were well above performance limits. We consider possible mechanisms by which vision may influence tactile processing.

Tendering: optimization and rationality

There have been various techniques published for optimizing the net present value of tenders by use of discounted cash flow theory and linear programming. These approaches to tendering appear to have been largely ignored by the industry. This paper utilises six case studies of tendering practice in order to establish the reasons for this apparent disregard. Tendering is demonstrated to be a market orientated function with many subjective judgements being made regarding a firm's environment. Detailed consideration of 'internal' factors such as cash flow are therefore judged to be unjustified. Systems theory is then drawn upon and applied to the separate processes of estimating and tendering. Estimating is seen as taking place in a relatively sheltered environment and as such operates as a relatively closed system. Tendering, however, takes place in a changing and dynamic environment and as such must operate as a relatively open system. The use of sophisticated methods to optimize the value of tenders is then identified as being dependent upon the assumption of rationality, which is justified in the case of a relatively closed system (i.e. estimating), but not for a relatively open system (i.e. tendering).

Asymptotic expansions for Taylor coefficients of the composition of two functions

We give an asymptotic expansion for the Taylor coe±cients of L(P(z)) where L(z) is analytic in the open unit disc whose Taylor coe±cients vary `smoothly' and P(z) is a probability generating function. We show how this result applies to a variety of problems, amongst them obtaining the asymptotics of Bernoulli transforms and weighted renewal sequences.

A simple device for multiplex ELISA made from melt-extruded plastic microcapillary film

We present a simple device for multiplex quantitative enzyme-linked immunosorbant assays (ELISA) made from a novel melt-extruded microcapillary film (MCF) containing a parallel array of 200µm capillaries along its length. To make ELISA devices different protein antigens or antibodies were immobilised inside individual microcapillaries within long reels of MCF extruded from fluorinated ethylene propylene (FEP). Short pieces of coated film were cut and interfaced with a pipette, allowing sequential uptake of samples and detection solutions into all capillaries from a reagent well. As well as being simple to produce, these FEP MCF devices have excellent light transmittance allowing direct optical interrogation of the capillaries for simple signal quantification. Proof of concept experiments demonstrate both quantitative and multiplex assays in FEP MCF devices using a standard direct ELISA procedure and read using a flatbed scanner. This new multiplex immunoassay platform should find applications ranging from lab detection to point-of-care and field diagnostics.

Comparison of the rheology of mozzarella-type curd made from buffalo and cows’ milk

Curd rheology and calcium distribution in buffalo and cows’ milk, were compared at their natural pH and during acidification (pH 6.5–5.6). Buffalo milk displays a curd structure and rheology different from that of cows’ milk and the casein-bound calcium, as well as the contents of fat, protein and calcium, are also higher. Due to these higher amounts of casein-bound calcium, the overall curd strength with buffalo milk (as indicated by the dynamic moduli) was higher, at similar pH values, than those of equivalent gels produced from cows’ milk. The curd rheology was adversely affected at lower pH (5.8–5.6) in both of the milk types, due to the loss of casein-bound calcium from casein micelles. The degree of solubilisation of calcium in buffalo milk during acidification is quite different from that observed in cows’ milk with a lower proportion of the calcium being solubilised in the former. The maximum curd firmness was obtained at pH 6.0 in both milk types. For both species, these rheological and micellar changes were qualitatively the same but quantitatively different, due to the different milk compositions.

Structural transformation of graphite by arc-discharge

The formation of novel structures by the passage of an electric current through graphite is described. These structures apparently consist of hollow three-dimensional graphitic shells bounded by curved and faceted planes, typically made up of two graphene layers. The curved structures were frequently decorated with nano-scale carbon particles, or short nanotubes. In some cases, nanotubes were found to be seamlessly connected to the thin shells, indicating that the formation of the shells and the nanotubes is intimately connected. Small nanotubes or nanoparticles were also sometimes found encapsulated inside the hollow structures, while fullerene-like particles were often seen attached to the outside surfaces. With their high surface areas and structural perfection, the new carbon structures may have applications as anodes of lithium ion batteries or as components of composite materials.

Assessment of evaluations made to healthy eating policies in Europe: a review within the EATWELL Project

Objective: To identify and assess healthy eating policies at national level which have been evaluated in terms of their impact on awareness of healthy eating, food consumption, health outcome or cost/benefit. Design: Review of policy documents and their evaluations when available. Setting: European Member States. Subjects: One hundred and twenty-one policy documents revised, 107 retained. Results: Of the 107 selected interventions, twenty-two had been evaluated for their impact on awareness or knowledge and twenty-seven for their impact on consumption. Furthermore sixteen interventions provided an evaluation of health impact, while three actions specifically measured any cost/benefit ratio. The indicators used in these evaluations were in most cases not comparable. Evaluation was more often found for public information campaigns, regulation of meals at schools/canteens and nutrition education programmes. Conclusions: The study highlights the need not only to develop harmonized and verifiable procedures but also indicators for measuring effectiveness and success and for comparing between interventions and countries. EU policies are recommended to provide a set of indicators that may be measured consistently and regularly in all countries. Furthermore, public information campaigns should be accompanied by other interventions, as evaluations may show an impact on awareness and intention, but rarely on consumption patterns and health outcome.

Narrativising the facts: acting in screen and stage docudrama

This article presents findings and seeks to establish the theoretical markers that indicate the growing importance of fact-based drama in screen and theatre performance to the wider Anglophone culture. During the final decade of the twentieth century and the opening one of the twenty-first, television docudrama and documentary theatre have grown in visibility and importance in the UK, providing key responses to social, cultural and political change over the millennial period. Actors were the prime focus for the enquiry principally because so little research has been done into the special demands that fact-based performance makes on them. The main emphasis in actor training (in the UK at any rate) is, as it always has been, on preparation for fictional drama. Preparation in acting schools is also heavily geared towards stage performance. Our thesis was that performers called upon to play the roles of real people, in whatever medium, have added responsibilities both towards history and towards real individuals and their families. Actors must engage with ethical questions whether they like it or not, and we found them keenly aware of this. In the course of the research, we conducted 30 interviews with a selection of actors ranging from the experienced to the recently-trained. We also interviewed a few industry professionals and actor trainers. Once the interviews started it was clear that actors themselves made little or no distinction between how they set about their work for television and film. The essential disciplines for work in front of the camera, they told us, are the same whether the camera is electronic or photographic. Some adjustments become necessary, of course in the multi-camera TV studio. But much serious drama for the screen is made on film anyway. We found it was also the case that young actors now tend to get their first paid employment before a camera rather than on a stage. The screen-before-stage tendency, along with the fundamental re-shaping that has gone on in the British theatre since at least the early 1980s, had implications for actor training. We have also found that theatre work still tends to be most valued by actors. For all the actors we interviewed, theatre was what they liked doing best because it was there they could practice and develop their skills, there they could work most collectively towards performance, and there they could more directly experience audience feedback in the real time of the stage play. The current world of television has been especially constrained in regard to rehearsal time in comparison to theatre (and, to a lesser extent, film). This has also affected actors’ valuation of their work. Theatre is, and is not, the most important medium in which they find work. Theatre is most important spiritually and intellectually, because in theatre is collaborative, intensive, and involving; theatre is not as important in financial and career terms, because it is not as lucrative and not as visible to a large public as acting for the screen. Many actors took the view that, for all the industrial differences that do affect them and inevitably interest the academic, acting for the visible media of theatre, film and television involved fundamentally the same process with slightly different emphases.

A novel bogie design made of glass fibre reinforced plastic

This paper presents a completely new design of a bogie-frame made of glass fibre reinforced composites and its performance under various loading conditions predicted by finite element analysis. The bogie consists of two frames, with one placed on top of the other, and two axle ties connecting the axles. Each frame consists of two side arms and a transom between. The top frame is thinner and more compliant and has a higher curvature compared with the bottom frame. Variable vertical stiffness can be achieved before and after the contact between the two frames at the central section of the bogie to cope with different load levels. Finite element analysis played a very important role in the design of this structure. Stiffness and stress levels of the full scale bogie presented in this paper under various loading conditions have been predicted by using Marc provided by MSC Software. In order to verify the finite element analysis (FEA) models, a fifth scale prototype of the bogie has been made and tested under quasi-static loading conditions. Results of testing on the fifth scale bogie have been used to fine tune details like contact and friction in the fifth scale FEA models. These conditions were then applied to the full scale models. Finite element analysis results show that the stress levels in all directions are low compared with material strengths.

Innovation in construction: a sociology of technology approach

An alternative approach to understanding innovation is made using two intersecting ideas. The first is that successful innovation requires consideration of the social and organizational contexts in which it is located. The complex context of construction work is characterized by inter-organizational collaboration, a project-based approach and power distributed amongst collaborating organizations. The second is that innovations can be divided into two modes: ‘bounded’, where the implications of innovation are restricted within a single, coherent sphere of influence, and ‘unbounded’, where the effects of implementation spill over beyond this. Bounded innovations are adequately explained within the construction literature. However, less discussed are unbounded innovations, where many firms' collaboration is required for successful implementation, even though many innovations can be considered unbounded within construction's inter-organizational context. It is argued that unbounded innovations require an approach to understand and facilitate the interactions both within a range of actors and between the actors and technological artefacts. The insights from a sociology of technology approach can be applied to the multiplicity of negotiations and alignments that constitute the implementation of unbounded innovation. The utility of concepts from the sociology of technology, including ‘system building’ and ‘heterogeneous engineering’, is demonstrated by applying them to an empirical study of an unbounded innovation on a major construction project (the new terminal at Heathrow Airport, London, UK). This study suggests that ‘system building’ contains outcomes that are not only transformations of practices, processes and systems, but also the potential transformation of technologies themselves.

Measuring construction professional services exports: a case for change

There is limited understanding of the role of services in the wave of globalisation and how the strengths of the UK service sector help to respond to the challenge of global competition. The way in which the construction export data are collected does not reflect the impact of globalisation and the changes in the construction business environment, such as increasing foreign ownership, foreign affiliates, and changing forms of procurement. The paper describes construction service exports, how they are collected and classified, highlighting the challenges of recording the export performance of construction services in a changing world. A case for change is made to ensure the collection of statistics better reflects the role of construction professional services