A conformidade do projeto da usina hidrelétrica de Tijuco Alto em relação às áreas prioritárias para a conservação da diversidade biológica

A biodiversidade pode ser considerada como uma base da existência por proporcionar recursos e regular os processos naturais responsáveis pela manutenção da vida. Nas últimas décadas, a biodiversidade vem sendo perdida rapidamente, apresentando taxas de decréscimo nunca antes vistas, o que reduz a capacidade de aporte de recursos naturais para as gerações futuras. Em relação às estratégias de conservação da biodiversidade, os orgãos ambientais brasileiros têm empreendido diversos esforços na sistematização de dados e informações sobre biomas, ecossistemas e espécies ameaçadas com a finalidade do estabelecimento de indicadores e diretrizes para a conservação da diversidade biológica direcionados à tomada de decisões por parte de gestores públicos e privados, como aquelas que são deflagradas no âmbito dos processos de licenciamento ambiental. Dentre os instrumentos de gestão ambiental, o licencimaneto ambiental é aquele responsável pela autorização da implantação de empreendimentos potencialmente causadores de significativo impacto ambiental, como é o caso de usinas hidrelétricas. Para isso, o licenciamento ambiental deve estar baseado em estudos ambientais realizados a partir dos procedimentos metodológicos de avaliação de impacto ambiental, os quais devem preconizar os aspectos que caracterizam a vulnerabilidade ambiental da localidade geográfica onde está planejado o empreendimento. Neste sentido, o presente trabalho objetivou analisar de que forma os dados, informações, indicadores e diretrizes sobre a diversidade biológica brasileira, produzidos e estabelecidos pelo governo federal estão sendo utilizados no processo de licenciamento ambiental da usina hidrelétrica de Tijuco Alto do rio Ribeira de Iguape.

Fatores que interferem nas taxas de recuperação embrionária em éguas

The success in implementing an embryo transfer program derives from many factors. The embryo recovery rate is one of the most important factors, and allows the transfer to the recipient mare. This rate comes from a group of elements such as donor´s characteristics, collection date, reproductive management, semen quality, technician skill. Mainly because of the great importance of this direct interference on the results of an embryo recovery program, this study aimed to review the factors involved in embryo recovery rates in donor mares during an embryo transfer, suggesting some ways of improving these results

Preparo e caracterização de nanopartículas lipídicas sólidas como sistema carreador conjunto para os herbicidas atrazina e simazina visando futuras aplicações em agricultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito de diferentes ofertas de forragem na terminação de bovinos Nelore recebendo alta suplementação recriados com diferentes taxas de ganho

Pós-graduação em Zootecnia - FCAV

Reversão sexual de tilápias gift criadas em hapas e submetidas a diferentes taxas de alimentação em alta frequência

Pós-graduação em Zootecnia - FMVZ

Estudo sobre o panorama da energia elétrica no Brasil e tendências futuras

Pós-graduação em Engenharia Elétrica - FEB

Educação física escolar: estado da arte e direções futuras

The aim of this paper is to characterize and discuss the School Physical Education as a profession and subarea of research in the broader academic fi eld of Physical Education and educational research. To do that, it initially defi nes the difference between research in School Physical Education from research about School Physical Education, and point out the themes and research hypotheses for this subarea. It also analyses 289 articles characterized as research in School Physical Education, published in 11 Brazilian periodicals, classifying them in the following categories: “level of schooling”, “bodily practice” and “theme”. The results indicate that the majority of studies are carried out in elementary school, in “games” and “sports”, and in descriptive and interpretative research in School Physical Education practices in several dimensions and interrelations. In conclusion, it points to the need to a focus in the research in teaching, the implementation of public curricula, and teacher education. Finally, it alerts to the need for Brazilian postgraduate programs in the academic fi eld of physical education to invest more in research in School Physical Education subarea.

Características genotípicas de Staphylococcus coagulase-negativos e taxas de cura da mastite ovina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação e comparação das taxas de erosão química e mecânica entre arenitos e argilitos: implicações na evolução geomorfológica da bacia do Rio Corumbataí (SP)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de pontas e taxas de aplicação na deposição de calda no milho e em plantas daninhas

O objetivo deste trabalho foi avaliar diferentes pontas e taxas de pulverização na deposição de calda na cultura do milho e nas plantas daninhas Euphorbia heterophylla e Brachiaria plantaginea, localizadas nas linhas e nas entrelinhas da cultura. O experimento foi conduzido em delineamento de blocos ao acaso, em esquema fatorial 2 x 2 (2 pontas de pulverização DG 11002 VS (jato plano e gotas médias) e TXVK08 (jato cônico e gotas muito finas) x 2 taxas de aplicação, 100 e 200 L ha-1) com quatro repetições. As aplicações ocorreram aos 13 dias após a germinação do milho (3 a 5 folhas expandidas), as plantas de E. heterophylla apresentavam de 2 a 4 folhas e as plantas de B. plantaginea de 2 a 3 folhas. Utilizou-se como marcador o corante Azul Brilhante (FD&C-1) na concentração de 3000 ppm. Conclui-se que os maiores depósitos médios nas plantas de milho foram proporcionados pela ponta TXVK08, independente da taxa utilizada e que os depósitos mais uniformes ocorreram quando utilizou-se a taxa de 200 L ha-1. Para as plantas daninhas localizadas na linha da cultura, as pontas de pulverização promoveram depósitos de calda mais uniformes na B. plantaginea do que na E. heterophylla, em ambas as taxas de aplicação. Para a B. plantaginea localizadas na entrelinha da cultura a ponta DG 11002VS foi a que proporcionou depósitos de gotas mais uniformes, sendo que para E. heterophylla a ponta mais eficiente em depositar gotas foi a TXVK08.

Avaliação da resistência à corrosão da liga Ti-30Ta submetida a diferentes taxas de deformação visando aplicações biomédicas

This study aims to evaluate the corrosion resistance of Ti-30Ta alloy when subjected to different strain rates. Samples of the alloy Ti-30Ta were obtained from the melting of pure elements in the arc furnace in inert atmosphere (argon gas). Then, the samples were subjected to a thermal treatment and to cold worked to obtain bars. After forging, the samples were machined in accordance with ASTME9-09 standard for carried out compression tests. To microstructural characterization, samples were sectioned longitudinal and transversally and embedded in resin. After, the wet sanding and polishing were performed, followed by a chemical attack, in order to study the microstructure under an optical microscope. Microhardness was measured on the samples that were subjected to microstructural characterization by using microhardness tester. Phases were evaluated by x-rays diffraction. Corrosion tests were carried out to evaluate the influence of deformation on the corrosion resistance. Results show that microstructure was not influenced by deformation

Previsão de demanda de veículos automotores através do modelo de regressão linear múltipla

This study aimed to model a equation for the demand of automobiles and light commercial vehicles, based on the data from February 2007 to July 2014, through a multiple regression analysis. The literature review consists of an information collection of the history of automotive industry, and it has contributed to the understanding of the current crisis that affects this market, which consequence was a large reduction in sales. The model developed was evaluated by a residual analysis and also was used an adhesion test - F test - with a significance level of 5%. In addition, a coefficient of determination (R2) of 0.8159 was determined, indicating that 81.59% of the demand for automobiles and light commercial vehicles can be explained by the regression variables: interest rate, unemployment rate, broad consumer price index (CPI), gross domestic product (GDP) and tax on industrialized products (IPI). Finally, other ten samples, from August 2014 to May 2015, were tested in the model in order to validate its forecasting quality. Finally, a Monte Carlo Simulation was run in order to obtain a distribution of probabilities of future demands. It was observed that the actual demand in the period after the sample was in the range that was most likely to occur, and that the GDP and the CPI are the variable that have the greatest influence on the developed model

Avaliação da resistência à corrosão da liga Ti-30Ta submetida a diferentes taxas de deformação visando aplicações biomédicas

This study aims to evaluate the corrosion resistance of Ti-30Ta alloy when subjected to different strain rates. Samples of the alloy Ti-30Ta were obtained from the melting of pure elements in the arc furnace in inert atmosphere (argon gas). Then, the samples were subjected to a thermal treatment and to cold worked to obtain bars. After forging, the samples were machined in accordance with ASTME9-09 standard for carried out compression tests. To microstructural characterization, samples were sectioned longitudinal and transversally and embedded in resin. After, the wet sanding and polishing were performed, followed by a chemical attack, in order to study the microstructure under an optical microscope. Microhardness was measured on the samples that were subjected to microstructural characterization by using microhardness tester. Phases were evaluated by x-rays diffraction. Corrosion tests were carried out to evaluate the influence of deformation on the corrosion resistance. Results show that microstructure was not influenced by deformation

Previsão de demanda de veículos automotores através do modelo de regressão linear múltipla

This study aimed to model a equation for the demand of automobiles and light commercial vehicles, based on the data from February 2007 to July 2014, through a multiple regression analysis. The literature review consists of an information collection of the history of automotive industry, and it has contributed to the understanding of the current crisis that affects this market, which consequence was a large reduction in sales. The model developed was evaluated by a residual analysis and also was used an adhesion test - F test - with a significance level of 5%. In addition, a coefficient of determination (R2) of 0.8159 was determined, indicating that 81.59% of the demand for automobiles and light commercial vehicles can be explained by the regression variables: interest rate, unemployment rate, broad consumer price index (CPI), gross domestic product (GDP) and tax on industrialized products (IPI). Finally, other ten samples, from August 2014 to May 2015, were tested in the model in order to validate its forecasting quality. Finally, a Monte Carlo Simulation was run in order to obtain a distribution of probabilities of future demands. It was observed that the actual demand in the period after the sample was in the range that was most likely to occur, and that the GDP and the CPI are the variable that have the greatest influence on the developed model