957 resultados para TRACE GASES
Resumo:
Tesis (Maestría en Ciencias en Producción Agrícola) UANL
Resumo:
Tesis (Maestro en Ciencias de la Ingeniería Mecánica con Especialidad en Térmica y Fluidos - Universidad Autónoma de Nuevo León, 1999
Resumo:
Tesis (Maestro en Ciencias de la Ingeniería Eléctrica con Especialidad en Control) UANL, 2000.
Resumo:
Tesis (Maestría en Ciencias Químicas con Especialidad en Química Analítica) U.A.N.L.
Resumo:
UANL
Resumo:
Tesis (Doctorado en Ciencias Agrícolas con Especialidad en Agua-Suelo) UANL
Resumo:
Tesis (Doctor en Ciencias con Acentuación en Alimentos) UANL, 2010.
Resumo:
Dans ce mémoire, nous étudierons quelques propriétés algébriques, géométriques et topologiques des surfaces de Riemann compactes. Deux grand sujets seront traités. Tout d'abord, en utilisant le fait que toute surface de Riemann compacte de genre g plus grand ou égal à 2 possède un nombre fini de points de Weierstrass, nous allons pouvoir conclure que ces surfaces possèdent un nombre fini d'automorphismes. Ensuite, nous allons étudier de plus près la formule de trace d'Eichler. Ce théorème nous permet de trouver le caractère d'un automorphisme agissant sur l'espace des q-différentielles holomorphes. Nous commencerons notre étude en utilisant la quartique de Klein. Nous effectuerons un exemple de calcul utilisant le théorème d'Eichler, ce qui nous permettra de nous familiariser avec l'énoncé du théorème. Finalement, nous allons démontrer la formule de trace d'Eichler, en prenant soin de traiter le cas où l'automorphisme agit sans point fixe séparément du cas où l'automorphisme possède des points fixes.
Resumo:
This thesis is a modest attempt in assessing the trace metal levels and their behavior in the aquatic environment of Kuttanad, an aquatic system that is severely affected by man’s intervention on natural processes, by study seriously evaluating the levels of trace metals in dissolved and particulate phases and also in the different chemical fractions of the sediments. Understanding of the distributions, variations and transfer processes of trace metals in different environmental phases in the backwaters of Kuttanad is vital for the assessment of the water pollution problems and study the ecology of the area which contributes 20% of the rice production in the State of Kerala. Kuttand is a low-lying, shallow bay formed as a result of geological uplift. The major economic activity is agriculture involving 40% of the population. About 1.5% of the people are engaged in aquaculture. The trace metal distribution in the Kuttand backwaters is considerably influenced by the tropical features of the location and by human activities including agricultural activities and construction of salinity barrier. In this study an attempt is made to differentiate the metals in the sediment into exchangeable, reducible and resistant fractions in the sediments.
Resumo:
Rare earth elements have occupied an important role in marine geochemical research, particularly as used in the format of REE abundance patterns to describe the geochemical pathways in marine sedimentation and authigenesis. This study concentrates on the distribution pattern of Rare earth elements in the sediments, behavior of Eu and Ce with respect to their occurrence in multiple oxidation states. It also concentrate the depth wise variation of sediment REEs from near shore areas (30m) to deeper depths 200m) in the Arabian Sea. It includes the downcore variation of REEs and other trace elements in the sediment cores and a comparison between the REE distributions of Arabian Sea sediment with the sediments of Andaman Sea. The study gives a general introduction regarding the importance of RRE studies, its occurrence and abundance, electronic configuration, lanthanide contraction, oxidations states and REE supply to the ocean, seawater and sediments.
Resumo:
In this communication, we discuss the details of fabricating an off-line fibre optic sensor (FOS) based on evanescent wave absorption for detecting trace amounts of Fe3+ in water. Two types of FOS are developed; one type uses the unclad portion of a multimode silica fibre as the sensing region whereas the other employs the microbent portion of a multimode plastic fibre as the sensing region. Sensing is performed by measuring the absorption of the evanescent wave in a reagent medium surrounding the sensing region. To evaluate the relative merits of the two types of FOS in Fe3+ sensing, a comparative study of the sensors is made, which reveals the superiority of the latter in many respects, such as smaller sensing length, use of a double detection scheme (for detecting both core and cladding modes) and higher sensitivity of cladding mode detection at an intermediate range of concentration along with the added advantage that plastic fibres are inexpensive. A detection limit of 1 ppb is observed in both types of fibre and the range of detection can be as large as 1 ppb–50 ppm. All the measurements are carried out using a LabVIEW set-up.
Resumo:
In this communication, we discuss the details of fabricating an off-line fibre optic sensor (FOS) based on evanescent wave absorption for detecting trace amounts of Fe3+ in water. Two types of FOS are developed; one type uses the unclad portion of a multimode silica fibre as the sensing region whereas the other employs the microbent portion of a multimode plastic fibre as the sensing region. Sensing is performed by measuring the absorption of the evanescent wave in a reagent medium surrounding the sensing region. To evaluate the relative merits of the two types of FOS in Fe3+ sensing, a comparative study of the sensors is made, which reveals the superiority of the latter in many respects, such as smaller sensing length, use of a double detection scheme (for detecting both core and cladding modes) and higher sensitivity of cladding mode detection at an intermediate range of concentration along with the added advantage that plastic fibres are inexpensive. A detection limit of 1 ppb is observed in both types of fibre and the range of detection can be as large as 1 ppb–50 ppm. All the measurements are carried out using a LabVIEW set-up.
Resumo:
In this communication, we discuss the details of fabricating an off-line fibre optic sensor (FOS) based on evanescent wave absorption for detecting trace amounts of Fe3+ in water. Two types of FOS are developed; one type uses the unclad portion of a multimode silica fibre as the sensing region whereas the other employs the microbent portion of a multimode plastic fibre as the sensing region. Sensing is performed by measuring the absorption of the evanescent wave in a reagent medium surrounding the sensing region. To evaluate the relative merits of the two types of FOS in Fe3+ sensing, a comparative study of the sensors is made, which reveals the superiority of the latter in many respects, such as smaller sensing length, use of a double detection scheme (for detecting both core and cladding modes) and higher sensitivity of cladding mode detection at an intermediate range of concentration along with the added advantage that plastic fibres are inexpensive. A detection limit of 1 ppb is observed in both types of fibre and the range of detection can be as large as 1 ppb–50 ppm. All the measurements are carried out using a LabVIEW set-up.
Resumo:
In this communication, we discuss the details of fabricating an off-line fibre optic sensor (FOS) based on evanescent wave absorption for detecting trace amounts of Fe3+ in water. Two types of FOS are developed; one type uses the unclad portion of a multimode silica fibre as the sensing region whereas the other employs the microbent portion of a multimode plastic fibre as the sensing region. Sensing is performed by measuring the absorption of the evanescent wave in a reagent medium surrounding the sensing region. To evaluate the relative merits of the two types of FOS in Fe3+ sensing, a comparative study of the sensors is made, which reveals the superiority of the latter in many respects, such as smaller sensing length, use of a double detection scheme (for detecting both core and cladding modes) and higher sensitivity of cladding mode detection at an intermediate range of concentration along with the added advantage that plastic fibres are inexpensive. A detection limit of 1 ppb is observed in both types of fibre and the range of detection can be as large as 1 ppb–50 ppm. All the measurements are carried out using a LabVIEW set-up.
Resumo:
Polycyclic Aromatic Hydrocarbons and other toxic compounds from industrial effluents are noted for their high potency for skin, lung, bladder and gastrointestinal cancers. Increased industrialization, and population growth led to greater production of wastes, Pesticides and PAHs have received attention due to their carcinogenic effects. The main objectives of the study were; to collect base line data on the concentration of PAHs in seawater and sediment from the west coast of India, the concentration of PAHs in certain species of fishes, the comparative levels of PAHs in fish, the influence of sediment characteristics on the concentration of PAH in sediment, changes in PAH concentration in water, sediment and fish, to provide a base line concentration of trace metals in water, sediment and fish, the seasonal changes in content of selected trace metals in water, sediment and fish from the west coast of India. The present study revealed that a predominance of silt and clay at all stations in the off Cochin area. The study has provided comprehensive information available to date for PAHs in seawater, sediment and fishes from the west cost of India especially from the Quilon to Mangalore region.