Accuracy of FEM and BEM for electromagnetic flux calculations in high power applications

The development and design of electric high power devices with electromagnetic computer-aided engineering (EM-CAE) software such as the Finite Element Method (FEM) and Boundary Element Method (BEM) has been widely adopted. This paper presents the analysis of a Fault Current Limiter (FCL), which acts as a high-voltage surge protector for power grids. A prototype FCL was built. The magnetic flux in the core and the resulting electromagnetic forces in the winding of the FCL were analyzed using both FEM and BEM. An experiment on the prototype was conducted in a laboratory. The data obtained from the experiment is compared to the numerical solutions to determine the suitability and accuracy of the two methods.

Volume-dependent response of precooling for intermittent-sprint exercise in the heat

Purpose: To assess the effects of pre-cooling volume on neuromuscular function and performance in free-paced intermittent-sprint exercise in the heat. Methods: Ten male, teamsport athletes completed four randomized trials involving an 85-min free-paced intermittentsprint exercise protocol in 33°C±33% relative humidity. Pre-cooling sessions included whole body (WB), head+hand (HH), head (H) and no cooling (CONT), applied for 20-min pre-exercise and 5-min mid exercise. Maximal voluntary contractions (MVC) were assessed pre- and postintervention and mid- and post-exercise. Exercise performance was assessed with sprint times, % decline and distances covered during free-paced bouts. Measures of core(Tc) and skin (Tsk) temperatures, heart rate, perceptual exertion and thermal stress were monitored throughout. Venous and capillary blood was analyzed for metabolite, muscle damage and inflammatory markers. Results: WB pre-cooling facilitated the maintenance of sprint times during the exercise protocol with reduced % decline (P=0.04). Mean and total hard running distances increased with pre cooling 12% compared to CONT (P<0.05), specifically, WB was 6-7% greater than HH (P=0.02) and H (P=0.001) respectively. No change was evident in mean voluntary or evoked force pre- to post-exercise with WB and HH cooling (P>0.05). WB and HH cooling reduced Tc by 0.1-0.3°C compared to other conditions (P<0.05). WB Tsk was suppressed for the entire session(P=0.001). HR responses following WB cooling were reduced(P=0.05; d=1.07) compared to CONT conditions during exercise. Conclusion: A relationship between pre-cooling volume and exercise performance seems apparent, as larger surface area coverage augmented subsequent free-paced exercise capacity, in conjunction with greater suppression of physiological load. Maintenance of MVC with pre-cooling, despite increased work output suggests the role of centrally-mediated mechanisms in exercise pacing regulation and subsequent performance.

Duration-dependant response of mixed-method pre-cooling for intermittent-sprint exercise in the heat

This study examined the effects of pre-cooling duration on performance and neuromuscular function for self-paced intermittent-sprint shuttle running in the heat. Eight male, team-sport athletes completed two 35-min bouts of intermittent-sprint shuttle running separated by a 15-min recovery on three separate occasions (33°C, 34% relative humidity). Mixed-method pre-cooling was completed for 20 min (COOL20), 10-min (COOL10) or no cooling (CONT) and reapplied for 5-min mid-exercise. Performance was assessed via sprint times, percentage decline and shuttle-running distance covered. Maximal voluntary contractions (MVC), voluntary activation (VA) and evoked twitch properties were recorded pre- and post-intervention and mid- and post-exercise. Core temperature (T c), skin temperature, heart rate, capillary blood metabolites, sweat losses, perceptual exertion and thermal stress were monitored throughout. Venous blood draws pre- and post-exercise were analyzed for muscle damage and inflammation markers. Shuttle-running distances covered were increased 5.2 ± 3.3% following COOL20 (P < 0.05), with no differences observed between COOL10 and CONT (P > 0.05). COOL20 aided in the maintenance of mid- and post-exercise MVC (P < 0.05; d > 0.80), despite no conditional differences in VA (P > 0.05). Pre-exercise T c was reduced by 0.15 ± 0.13°C with COOL20 (P < 0.05; d > 1.10), and remained lower throughout both COOL20 and COOL10 compared to CONT (P < 0.05; d > 0.80). Pre-cooling reduced sweat losses by 0.4 ± 0.3 kg (P < 0.02; d > 1.15), with COOL20 0.2 ± 0.4 kg less than COOL10 (P = 0.19; d = 1.01). Increased pre-cooling duration lowered physiological demands during exercise heat stress and facilitated the maintenance of self-paced intermittent-sprint performance in the heat. Importantly, the dose-response interaction of pre-cooling and sustained neuromuscular responses may explain the improved exercise performance in hot conditions.

Allegations of child sexual abuse in family court cases : a qualitative analysis of psychiatric evidence

Allegations of child sexual abuse in Family Court cases have gained increasing attention. The study investigates factors involved in Family Court cases involving allegations of child sexual abuse. A qualitative methodology was employed to examine Records of Judgement and Psychiatric Reports for 20 cases distilled from the data corpus of 102 cases. A seven-stage methodology was developed utilising a thematic analysis process informed by principles of grounded theory and phenomenology. The explication of eight thematic clusters was undertaken. The findings point to complex issues and dynamics in which child sexual abuse allegations have been raised. The alleging parent’s allegations of sexual abuse against their ex-partner may be: the expression of unconscious deep fears for their children’s welfare, or an action to meet their needs for personal affirmation in the context of the painful upheaval of a relationship break-up. Implications of the findings are discussed.

Concurrent and longitudinal links between children’s and their friends’ antisocial and prosocial behavior in preschool

Concurrent and longitudinal links between children’s own and their nominated best friends’ antisocial and prosocial behavior were studied in a normative sample of 3–5-year-olds (N = 203). Moderating effects of age and gender were also explored. Subscales of the Strength and Difficulties Questionnaire (SDQ) were used to obtain teacher ratings of behavior for each target child and his/her nominated best friends. Nomination of best friends with higher levels of antisocial behavior and lower levels of prosocial behavior was concurrently linked to more antisocial behavior in boys. Nomination of highly prosocial best friends was concurrently linked to more prosocial behavior in both boys and girls. However, the study found no longitudinal effects of best friends’ behavior on target child’s behavior over a one-year period. A group of children who nominated no best friends at T1 were generally perceived as less prosocial, but not more antisocial, than other children. © 2011 Elsevier Inc. All rights reserved.

Observed family interaction and outcome in patients with first-admission psychoses

Families of 52 first-admission patients diagnosed with a severe psychiatric disorder were videotaped interacting with the patient. Behavioral coding was used to derive several indices of interaction: base rates of positive and negative behavior by patients and relatives, cumulative affect of patients and relatives (the difference between the rates of positive and negative behaviors), and classification of families as affect-regulated or unregulated. Family-affect regulation reflects positive cumulative affect by both people in a given interaction. Six months after hospital discharge patients were assessed on occurrence of relapse, global functioning, severity of psychiatric symptoms, and quality of life. Relative to affect-unregulated family interaction, affect-regulated interaction predicted significantly fewer relapses, better global functioning, fewer positive and negative psychiatric symptoms, and higher patient quality of life. Most of the predictions by family-affect regulation were independent of

Carers' hope, wellbeing and attitudes regarding recovery

Carers are important to the recovery of their relatives with serious mental disorder however, it is unclear whether they are aware of, or endorse recent conceptualisations of recovery. This study compared carers’ and mental health workers’ recovery attitudes, and undertook multivariate predictions of carers’ wellbeing, hopefulness and recovery attitudes. Participants were 82 Australian family members caring for a relative with psychosis. Carers’ average recovery attitudes were less optimistic than for previously surveyed staff. Carers’ recovery attitudes were predicted by perceptions that their relative’s negative symptoms were more severe. Hopefulness and wellbeing was predicted by more positive and less negative caregiving experiences. Hopefulness was also predicted by less frequent contacts with their affected relative, and unexpectedly, by perceptions of more severe psychotic symptoms. Carers’ wellbeing was further predicted by having a partner and having no lifetime history of a mental disorder. Hope and wellbeing are affected by everyday challenges and positive experiences of caregiving.

Monitoring smartphones for anomaly detection

In this paper we demonstrate how to monitor a smartphone running Symbian operating system and Windows Mobile in order to extract features for anomaly detection. These features are sent to a remote server because running a complex intrusion detection system on this kind of mobile device still is not feasible due to capability and hardware limitations. We give examples on how to compute relevant features and introduce the top ten applications used by mobile phone users based on a study in 2005. The usage of these applications is recorded by a monitoring client and visualized. Additionally, monitoring results of public and self-written malwares are shown. For improving monitoring client performance, Principal Component Analysis was applied which lead to a decrease of about 80 of the amount of monitored features.

Biomechanical performance of polycaprolactone (PCL)-based scaffold with rhBMP-2 in a sheep thoracic spine fusion model

Adolescent idiopathic scoliosis is a complex three dimensional deformity affecting 2-3% of the general population. Resulting spine deformities include progressive coronal curvature, hypokyphosis, or frank lordosis in the thoracic spine and vertebral rotation in the axial plane with posterior elements turned into the curve concavity. The potential for curve progression is heightened during the adolescent growth spurt. Success of scoliosis deformity correction depends on solid bony fusion between adjacent vertebrae after the intervertebral discs have been surgically cleared and the disc spaces filled with graft material. Problems with bone graft harvest site morbidity as well as limited bone availability have led to the search for bone graft substitutes. Recently, a bioactive and resorbable scaffold fabricated from medical grade polycaprolactone (PCL) has been developed for bone regeneration at load bearing sites. Combined with recombinant human bone morphogenic protein–2 (rhBMP-2), this has been shown to be successful in acting as a bone graft substitute in acting as a bone graft substitute in a porcine lumbar interbody fusion model when compared to autologous bone graft. This in vivo sheep study intends to evaluate the suitability of a custom designed medical grade PCL scaffold in combination with rhBMP-2 as a bone graft substitute in the setting of mini–thoracotomy surgery as a platform for ongoing research to benefit patients with adolescent idiopathic scoliosis.

Magnetic flux analysis in superconducting Fault Current Limiters under short-circuit conditions

In order to obtain a more compact Superconducting Fault Current limiter (SFCL), a special geometry of core and AC coil is required. This results in a unique magnetic flux pattern which differs from those associated with conventional round core arrangements. In this paper the magnetic flux density within a Fault Current Limiter (FCL) is described. Both experimental and analytical approaches are considered. A small scale prototype of an FCL was constructed in order to conduct the experiments. This prototype comprises a single phase. The analysis covers both the steady state and the short-circuit condition. Simulation results were obtained using commercial software based on the Finite Element Method (FEM). The magnetic flux saturating the cores, leakage magnetic flux giving rise to electromagnetic forces and leakage magnetic flux flowing in the enclosing tank are computed.