Film with anthocyanins as an indicator of chilled pork deterioration

An indicator can be defined as a substance which indicates the presence or absence of another substance or the degree of a certain reaction through characteristic changes, especially color. Therefore, the aim of this work is to evaluate the performance of a bio-based film with anthocyanin as an indicator of chilled pork deterioration. A film made of cassava starch, glycerol, and grape anthocyanins was prepared using the casting technique. Pork loin samples were put in Petri dishes containing an anthocyanin film on the bottom and stored at 4 ºC. Psychrotrophic microorganism count and the pH of the pork loin samples were analyzed for a 14 day- period. At the same time, the films were subjected to colorimetric analysis using D65 illuminant and the CIELAB system. Chroma and hue angle data for these films were evaluated by Anova and Dunnett's test. An increase in the microbial population and in the pH was observed over the storage period as result of pork deterioration. Color changes were also identified in the film. However, only at the beginning of the storage period was it possible to establish a correlation between film color and pork deterioration. The shelf life end-point could not be clearly detected by the film.

The effect of relative humidity on tensile strength and water vapor permeability in chitosan, fish gelatin and transglutaminase edible films

Abstract Composite films of chitosan, fish gelatin and microbial transglutaminase (MTgase) were developed. Films were produced by the casting method and dried at room temperature for 30 h, conditioned for 7 days at 30 °C at a relative humidity (RH) from 11 to 90%, and characterized. Chitosan:fish gelatin films in different proportions (100:0, 75:25, 50:50) with MTgase, were subjected to tensile properties and water vapor transmission (WVT) testing. The results showed that tensile strength decreased with an increase in RH and with an increase in gelatin content. Percent of elongation also increased with increasing RH and gelatin concentration. Water vapor transmission showed an increase proportional to an increase in RH with the presence of gelatin being unfavorable for reducing WVT. Results in this work allowed studying the effect of relative humidity on tensile and water vapor properties of chitosan and fish gelatin films.

Synthesis and characterization of nanoperforated metal oxide thin films

For advanced devices in the application fields of data storage, solar cell and biosensing, one of the major challenges to achieve high efficiency is the fabrication of nanopatterned metal oxide surfaces. Such surfaces often require both precise structure at the nanometer scale and controllable patterned structure at the macro scale. Nowadays, the dominating candidates to fabricate nanopatterned surfaces are the lithographic technique and block-copolymer masks, most of which are unfortunately costly and inefficient. An alternative bottom-up approach, which involves organic/inorganic self-assembly and dip-coating deposition, has been studied intensively in recent years and has proven to be an effective technique for the fabrication of nanoperforated metal oxide thin films. The overall objective of this work was to optimize the synthesis conditions of nanoperforated TiO2 (NP-TiO2) thin films, especially to be compatible with mixed metal oxide systems. Another goal was to develop fabrication and processing of NP-TiO2 thin films towards largescale production and seek new applications for solar cells and biosensing. Besides the traditional dip-coating and drop-casting methods, inkjet printing was used to prepare thin films of metal oxides, with the advantage of depositing the ink onto target areas, further enabling cost-effective fabrication of micro-patterned nanoperforated metal oxide thin films. The films were characterized by water contact angle determination, Atomic Force Microscopy, Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy and Grazing Incidence XRay Diffraction. In this study, well-ordered zinc titanate nanoperforated thin films with different Zn/Ti ratios were produced successfully with zinc precursor content up to 50 mol%, and the dominating phase was Zn2Ti3O8. NP-TiO2 structures were also obtained by a cost-efficient means, namely inkjet printing, at both ambient temperature and 60 °C. To further explore new biosensing applications of nanoperforated oxide thin films, inkjet printing was used for the fabrication of both continuous and patterned polymeric films onto NP-TiO2 and perfluorinated phosphate functionalized NP-TiO2 substrates, respectively. The NP-TiO2 films can be also functionalized with a fluoroalkylsilane, resulting in hydrophobic surfaces on both titania and silica. The surface energy contrast in the nanoperforations can be tuned by irradiating the films with UV light, which provides ideal model systems for wettability studies.

Valukappaleiden valmistusprosessin kapeikot teräsvalimossa

Teräsvalimon toimitusprosessissa toimitusvarmuus on tärkeä tuotannon tunnusluku. Valimotuotannossa olevien lukuisten muuttujien vuoksi tuotannonsuunnittelu ja läpivirtauksen hallinta on haasteellista. Tuotteiden, valumateriaalien ja näiden yhdistelmien suuri yhtäaikainen määrä tuotannossa vaikeuttaa tuotannon ennustettavuutta sekä vaikuttaa läpivirtaukseen ja toimitusvarmuuteen. Lisäksi tuotannon eri työvaiheissa ilmenevät kapeikot rajoittavat läpivirtausta ja kasvattavat läpimenoaikoja. Kapeikkoja voidaan hyödyntää tuotannonohjauksessa jos kapeikot ovat selkeästi havaittavissa. Kapasiteetin siirtäminen ei-kapeikosta kapeikkoon lisää tuotannon läpivirtausta. Pelkkä kapeikkojen hallinta ei paranna toimitusvarmuutta jos keskeneräisen tuotannon määrä on suuri ja järjestys väärä. Tuotannon työkuormien visuaalisuuden parantaminen kaikilla työvaiheilla antaa mahdollisuuksia ohjata tuotantoa tehokkaammin. Kandidaatintyössä on tarkasteltu teräsvalimon valmistusprosessia ja selvitetty tuotannon eri vaiheissa ilmeneviä kapeikkoja. Selvitystyössä hyödynnettiin TOC-analyysiä. Keskeneräisen tuotannon määrää mitattiin useilla otannoilla eri työvaiheiden kohdalla. Tuloksia analysoimalla löydettiin tuotannon ongelmakohdat ja niihin tarvittavat kehitystoimenpiteet.

Metal oxides prepared through the nanocasting approach-mechanistic study, surface interactions and applications in separation

Mesoporous metal oxides are nowadays widely used in various technological applications, for instance in catalysis, biomolecular separations and drug delivery. A popular technique used to synthesize mesoporous metal oxides is the nanocasting process. Mesoporous metal oxide replicas are obtained from the impregnation of a porous template with a metal oxide precursor followed by thermal treatment and removal of the template by etching in NaOH or HF solutions. In a similar manner to the traditional casting wherein the product inherits the features of the mold, the metal oxide replicas are supposed to have an inverse structure of the starting porous template. This is however not the case, as broken or deformed particles and other structural defects have all been experienced during nanocasting experiments. Although the nanocasting technique is widely used, not all the processing steps are well understood. Questions over the fidelity of replication and morphology control are yet to be adequately answered. This work therefore attempts to answer some of these questions by elucidating the nanocasting process, pin pointing the crucial steps involved and how to harness this knowledge in making wholesome replicas which are a true replication of the starting templates. The rich surface chemistry of mesoporous metal oxides is an important reason why they are widely used in applications such as catalysis, biomolecular separation, etc. At times the surface is modified or functionalized with organic species for stability or for a particular application. In this work, nanocast metal oxides (TiO2, ZrO2 and SnO2) and SiO2 were modified with amino-containing molecules using four different approaches, namely (a) covalent bonding of 3-aminopropyltriethoxysilane (APTES), (b) adsorption of 2-aminoethyl dihydrogen phosphate (AEDP), (c) surface polymerization of aziridine and (d) adsorption of poly(ethylenimine) (PEI) through electrostatic interactions. Afterwards, the hydrolytic stability of each functionalization was investigated at pH 2 and 10 by zeta potential measurements. The modifications were successful except for the AEDP approach which was unable to produce efficient amino-modification on any of the metal oxides used. The APTES, aziridine and PEI amino-modifications were fairly stable at pH 10 for all the metal oxides tested while only AZ and PEI modified-SnO2 were stable at pH 2 after 40 h. Furthermore, the functionalized metal oxides (SiO2, Mn2O3, ZrO2 and SnO2) were packed into columns for capillary liquid chromatography (CLC) and capillary electrochromatography (CEC). Among the functionalized metal oxides, aziridinefunctionalized SiO2, (SiO2-AZ) showed good chemical stability, and was the most useful packing material in both CLC and CEC. Lastly, nanocast metal oxides were synthesized for phosphopeptide enrichment which is a technique used to enrich phosphorylated proteins in biological samples prior to mass spectrometry analysis. By using the nanocasting technique to prepare the metal oxides, the surface area was controlled within a range of 42-75 m2/g thereby enabling an objective comparison of the metal oxides. The binding characteristics of these metal oxides were compared by using samples with different levels of complexity such as synthetic peptides and cell lysates. The results show that nanocast TiO2, ZrO2, Fe2O3 and In2O3 have comparable binding characteristics. Furthermore, In2O3 which is a novel material in phosphopeptide enrichment applications performed comparably with standard TiO2 which is the benchmark for such phosphopeptide enrichment procedures. The performance of the metal oxides was explained by ranking the metal oxides according to their isoelectric points and acidity. Overall, the clarification of the nanocasting process provided in this work will aid the synthesis of metal oxides with true fidelity of replication. Also, the different applications of the metal oxides based on their surface interactions and binding characteristics show the versatility of metal oxide materials. Some of these results can form the basis from which further applications and protocols can be developed.

Structural studies in the Southern Province, South of Sudbury, Ontario

Rocks correlated with the Hough Lake and Quirke Lake Groups of the Huronian Supergroup form part of a northeasterly trending corridor that separates 1750 Ma granitic intrusive rocks of the Chief Lake batholith from the 1850 Ma mafic intrusive rocks of the Sudbury Igneous Complex. This corridor is dissected by two major structural features; the Murray Fault Zone (MFZ) and the Long Lake Fault (LLF). Detailed structural mapping and microstructural analysis indicates that the LLF, which has juxtaposed Huronian rocks of different deformation style and metamorphism grade, was a more significant plane of dislocation than the MFZ. The sense of displacement along the LLF is high angle reverse in which rocks to the southeast have been raised relative to those in the northwest. South of the LLF Huronian rocks underwent ductile defonnation at amphibolite facies conditions. The strain was constrictional, defined by a triaxial strain ellipsoid in which X > Y > z. Calculations of a regional k value were approximately 1.3. Penetrative ductile defonnation resulted in the development of a preferred crystallographic orientation in quartz as well as the elongation of quartz grains to fonn a regional southeast-northwest trending, subvertical lineation. Similar lithologies north of the LLF underwent dominantly brittle deformation under greenschist facies conditions. Deformation north of the LLF is characterized by the thrusting of structural blocks to form angular discordances in bedding orientation which were previously interpreted as folds. Ductile deformation occurred between 1750 and 1238 Ma and is correlated with a regional period of south over north reverse faulting that effected much of the southern Sudbury region. Post dating the reverse faulting event was a period of sedimentation as a conglomerate unit was deposited on vertically bedded Huronian rocks. Rocks in the study area were intruded by both mafic and felsic dykes. The 1238 Ma mafic dykes appear to have been offset during a period of dextral strike slip displacement along the major fault'). Indirect evidence indicates that this event occurred after the thrusting at 950 to 1100 Ma associated with the Grenvillian Orogeny.

Structural studies and gabbro mylonitization within the Barton Bay Deformation Zone, Geraldton, Ontario /

Structures related to ductile siMple shear parallel to the Bankf ield-Tonbill Fault, define a 5km wide zone, the Barton Bay Deformation Zone. Structures present within this zone Include; simple shear fabrics S, C and C , asymmetric Z shaped folds with rotated axes, boudinage and pinch and swell structures and a subhorlzontal extension llneation. The most highly deformed rock is a gabbro mylonite which occurs in the fault zone. The deformation of this gabbro has been traced in stages from a protomylonite to an ultramylonite In which feldspar and chlorite grainslze has been reduced from over 100 microns to as little as 5 microns. Evidence from the mylonite and the surrounding structure indicates that deformation within the Barton Bay Deformation Zone is related to a regional simple shear zone, the Bankf ield-Tombill Fault. Movement along this shear zone was in a south over north oblique strike slip fashion with a dextral sense of displacement.

Structural analysis of the Paint Lake Deformation Zone, Northern Ontario /

The Paint Lake Deformation Zone (PLDZ), located within the Superior Province of Canada, demarcates a major structural and lithological break between the Onaman-Tashota Terrane to the north and the Beardmore-Geraldton Belt to the south. The PLDZ is an east-west trending lineament, approximately 50 km in length and up to 1 km in width, comprised of an early ductile component termed the Paint Lake Shear Zone and a late brittle component known as the Paint Lake Fault. Structures associated with PLDZ development including S-, C- and C'-fabrics, stretching lineations, slickensides, C-C' intersection lineations, Z-folds and kinkbands indicate that simple shear deformation dominated during a NW-SE compressional event. Movement along the PLDZ was in a dextral sense consisting of an early differential motion with southside- down and a later strike-slip motion. Although the locus of the PLDZ may in part be lithologically controlled, mylonitization which accompanied shear zone development is not dependent on the lithological type. Conglomerate, intermediate and mafic volcanic units exhibit similar mesoscopic and microscopic structures where transected by the PLDZ. Field mapping, supported by thin section analysis, defines five strain domains increasing in intensity of deformation from shear zone boundary to centre. A change in the dominant microstructural deformation mechanism from dislocation creep to diffusion creep is observed with increasing strain during mylonitization. C'-fabric development is temporally associated with this change. A decrease in the angular relationship between C- and C'-fabrics is observed upon attaining maximum strain intensity. Strain profiling of the PLDZ demonstrates the presence of an outer primary strain gradient which exhibits a simple profile and an inner secondary strain gradient which exhibits a more complex profile. Regionally metamorphosed lithologies of lower greenschist facies outside the PLDZ were subjected to retrograde metamorphism during deformation within the PLDZ.

A tour from the City of New-York, to Detroit, in the Michigan Territory, made between the 2d of May and the 22d of September, 1818 : the tour extends from New-York, by Albany, Schenectady, and Utica to Sacket's Harbor, and thence throught Lake Ontario, to St. Lawrence river, and down that stream to Hamilton village. Thence along both banks of the St. Lawrence, from Hamilton to the Thousand Islands; thence to Sacket's Harbor by water; from that place by the route of great Sodus, Geneva, Cananaigua and Batavia, to Buffalo; and from thence to Black Rock, Fort Erie, the Falls of Niagara, Queenston, Lewiston, and the memorable fields of Bridgewater and Chippewa after viewing the interesting place of Niagara, the author traversed the south shore of Lake Erie to the City of Detroit, and visited in the latter range, Dunkirk, Erie, Cleveland, Sandusky, and other places of less note. The tour is accompanied with a map upon which the route will be designated; a particular map of the Falls andRiver of Niagara, and the environs of the City of Detroit /

Errata slip inserted.

The People's Republic of China and her relations with the countries of the association of Southeast Asian nations : 1969-1975

Phe Ihesis examines the evolution of the -policies of the People fs Jtenublie of China towards J?hail°nd, PTal ysia, Singapore, Iidonesia pad the Philip-pines, organised in the Association of Southeast Asian Nations from 1969 to 1975• 2ze first central point of this study is an *ir sumption that the foreign relations of The People's Tepublic of Chi la Towards Southeast ^sia have been motivated by a dynamic interplay of t^o main factors: (1) Farxist-Leninist ideology and ICao J^e-tung Ph^ught, which dictate to China to behave as a revolutionary Dover vhich must assist the insurgent movements in the area in their strug fle to overthrow the local governments; (2) national interest, vhich demands of China to safeguard the southern flank of her territory bordering on Southerst 'sia through Friendly relations, trade and ot*»er conventional inrtniments of diplomacy. hile the tvo main motive factors are nuTually antagonistic and exclusivet the Chinere leaders are nevertheless at te mi ting to oring them iirco a coherent policy under Mao's theory of tve {hniity of op-nosites," vhich believes that it is -possible to reconcile these co-posing tendencies into a dynamic enuibrium through vhich both opnosites could be promoted at the same time although not to the same extent* la other words, the Chinese leaders conceive the dynamic equilibrium as a continuum between them in a mix in which one or the other orientation predominates in different •periods* Bins we might see China1 s conduct motivated in one period by mostly ideological considerations at the expense of the staire-to-state relations, then ve might see her policy in the middle of the continuum and suf ering from immo bill sine and just muddling through, or finally ?fe might see her emphasising friendly ties at the expense of support of revolutionary movements at the other extreme -point of the spectrum* !fhe mechanism vhich enables Peking to move from one pole to the other of the spectrum is activated by the following elementsJ (1) the result of an internal power struggle within the leadership in Peking between ideologically radical and moderate elements, which enables the victorious faction to initiate nev policies; (2) Peking's assessment of the changing intentions and capabilities of the major powers in the area; (3) internal changes within the countries of the area and the changing attitudes of their governments towards China; (4) changing fortunes of revolutionary movements operating in the area* 'Phe second major point of this study is an assertion that while China's conduct toward Southeast *lsia after her foundation in 1949 was primarily based upon ideological considerations, the beginning of the seventies saw the national interest reasserting itself as the leading motive factor* Thus China talks with her neighbours in Southeast asia in terms of relevance of fllong historical ties," casting herself into the role of a benevolent "older brother11 who is entitled to reopect and deference in exchange for patronage and protection* Hence the traditional echoes of the past are emerging ever stronger and influencing her postures towards the region, while the open support to revolutionary moevments is underplayed at the moment.

Tintype of African American Woman Standing with Book [n.d.]

A woman standing with a book beside a table covered with a decorative cloth is featured in this small black and white tintype photograph. The tintype has been mounted in a paper slip frame with gold edging. There is a small area of red, hand-colored highlighting on the tablecloth. The backdrop appears to be a painted landscape scene. The tintype is undated and there is no indication of the identity of the woman in the photo or the photographer. This tintype was in the possession of Iris Sloman Bell, of St. Catharines, Ontario. The Sloman - Bell families have relatives who are former slaves from the United States who later settled in southern Ontario."Tintypes were the invention of Prof. Hamilton Smith of Ohio. They begin as thin sheets of iron, covered with a layer of black paint. This serves as the base for the same iodized collodion coating and silver nitrate bath used in the ambrotype process. First made in 1856, millions were produced well into the twentieth century. When tintypes were finished in the same sorts of mats and cases used for ambrotypes, it can be almost impossible to distinguish which process was used without removing the image to examine the substrate." Source: American Museum of Photography http://www.photographymuseum.com/primer.html

Photophysical Investigations of Thiophene Azomethine Derivatives

Une série de dimères composés de thiophène-aniline encombrée stériquement a été synthétisée. Les différents processus de désactivation de l’état singulet excité ont été étudiés par UV-visible, fluorescence, phosphorescence, photolyse par impulsion laser et calculs théoriques. Les graphiques de Stern-Volmer obtenus à partir des expériences de désactivation des états singulet et triplet ont démontré l’efficacité de l’azométhine à désactiver les fluorophores. Les calculs semi-empiriques AM1 examinant l’effet des substituants encombrés ont démontrés que les groupements tert-butyls sur l’aniline ont moins d’influence sur la barrière de rotation N-aryl que les substitutions alkyles en ont sur la rotation de thiophène-C. Les calculs Rehm-Weller basés sur les potentiels d’oxydation et de réduction ont montré que l’autodésactivation de l’état excité des azométhines se fait par transfert d’électron photoinduit menant à une éradication complète de la fluorescence. Des complexes métalliques contenant des ligands azométhines ont aussi été préparés. Le ligand est composé d’une unité hydroxyquinoline lié à un cycle thiophène. Les données photophysiques de ces complexes indiquent un déplacement bathochromique aussi bien en absorbance qu’en fluorescence. Des dispositifs de détection d’ion métallique ont été préparés et un exemple à partir d’une solution de cuivre a montré un déplacement bathochromique.

Le cardinal Paul Grégoire et l'Église de Montréal (1968-1990)

L’historiographie récente du catholicisme québécois a passé pratiquement sous silence la vie et l’épiscopat de Mgr Paul Grégoire, archevêque de Montréal de 1968 à 1990. Pourtant, son épiscopat s’est déployé pendant une période cruciale de l’histoire du Québec et de l’Église catholique. Lorsque Mgr Grégoire devient archevêque de Montréal en avril 1968, le Québec vit encore sa Révolution tranquille, une période qui a vu l’éclosion au Québec de mentalités et moeurs nouvelles à l’enseigne du rejet du passé, sous l’impulsion d’une sécularisation et d’une déchristianisation déferlantes. De son côté, l’Église catholique vit son propre renouveau identitaire, fruit des travaux du Concile Vatican II, terminé depuis décembre 1965. C’est au confluent de ces deux renouveaux identitaires que l’épiscopat de Mgr Grégoire va prendre forme. L’archevêque de Montréal devra faire face à de nombreux défis inédits sur les fronts externes et internes. Ad extra, il devra prendre acte des défis d’une nouvelle donne sociale extrêmement défavorable à son Église, notamment sur le flanc de la confessionnalité du système d’éducation. Ad intra, il devra implanter les réformes conciliaires dans son diocèse, non sans avoir à affronter plusieurs résistances et incompréhensions, dont certaines deviendront des crises remettant en question la qualité de son leadership comme archevêque de Montréal. Au moment de sa retraite en mars 1990, Monsieur le cardinal Grégoire aura vu l’Église catholique perdre la majeure partie de son influence morale et spirituelle sur la société montréalaise et québécoise. Même si sa personnalité ne l’avait pas desservi dans ses efforts pour imprimer à l’Église de Montréal son orientation doctrinale, sa discipline et son style, on voit mal comment il aurait pu contrer significativement une évolution toute-puissante dans sa globalité. C’est ce que révèle le bilan de son épiscopat.

The Technology of Copper Alloys, Particularly Leaded Bronze, in Greece, its Colonies, and in Etruria during the Iron Age

L’objet de la présente étude est le développement, l’application et la diffusion de la technologie associée à divers types d’alliages de cuivre, en particulier l’alliage du plomb-bronze, en Grèce ancienne, dans ses colonies, ainsi qu’en Étrurie. Le plomb-bronze est un mélange de diverses proportions d’étain, de cuivre et de plomb. Le consensus général chez les archéométallurgistes est que le plomb-bronze n’était pas communément utilisé en Grèce avant la période hellénistique; par conséquent, cet alliage a reçu très peu d’attention dans les documents d’archéologie. Cependant, les analyses métallographiques ont prouvé que les objets composés de plomb ajouté au bronze ont connu une distribution étendue. Ces analyses ont aussi permis de différencier la composition des alliages utilisés dans la fabrication de divers types de bronzes, une preuve tangible que les métallurgistes faisaient la distinction entre les propriétés du bronze d’étain et celles du plomb-bronze. La connaissance de leurs différentes caractéristiques de travail permettait aux travailleurs du bronze de choisir, dans bien des cas, l’alliage approprié pour une utilisation particulière. L’influence des pratiques métallurgiques du Proche-Orient a produit des variations tant dans les formes artistiques que dans les compositions des alliages de bronze grecs durant les périodes géométrique tardive et orientalisante. L’utilisation du plomb-bronze dans des types particuliers d’objets coulés montre une tendance à la hausse à partir de la période orientalisante, culminant dans la période hellénistique tardive, lorsque le bronze à teneur élevée en plomb est devenu un alliage commun. La présente étude analyse les données métallographiques de la catégorie des objets coulés en bronze et en plomb-bronze. Elle démontre que, bien que l’utilisation du plomb-bronze n’était pas aussi commune que celle du bronze d’étain, il s’agissait néanmoins d’un mélange important d’anciennes pratiques métallurgiques. Les ères couvertes sont comprises entre les périodes géométrique et hellénistique.

Encodage des forces tactiles dans le cortex somatosensoriel primaire

Les deux fonctions principales de la main sont la manipulation d’objet et l’exploration tactile. La détection du glissement, rapportée par les mécanorécepteurs de la peau glabre, est essentielle pour l’exécution de ces deux fonctions. Durant la manipulation d’objet, la détection rapide du micro-glissement (incipient slip) amène la main à augmenter la force de pince pour éviter que l’objet ne tombe. À l’opposé, le glissement est un aspect essentiel à l’exploration tactile puisqu’il favorise une plus grande acuité tactile. Pour ces deux actions, les forces normale et tangentielle exercées sur la peau permettent de décrire le glissement mais également ce qui arrive juste avant qu’il y ait glissement. Toutefois, on ignore comment ces forces contrôlées par le sujet pourraient être encodées au niveau cortical. C’est pourquoi nous avons enregistré l’activité unitaire des neurones du cortex somatosensoriel primaire (S1) durant l’exécution de deux tâches haptiques chez les primates. Dans la première tâche, deux singes devaient saisir une pastille de métal fixe et y exercer des forces de cisaillement sans glissement dans une de quatre directions orthogonales. Des 144 neurones enregistrés, 111 (77%) étaient modulés à la direction de la force de cisaillement. L’ensemble de ces vecteurs préférés s’étendait dans toutes les directions avec un arc variant de 50° à 170°. Plus de 21 de ces neurones (19%) étaient également modulés à l’intensité de la force de cisaillement. Bien que 66 neurones (59%) montraient clairement une réponse à adaptation lente et 45 autres (41%) une réponse à adaptation rapide, cette classification ne semblait pas expliquer la modulation à l’intensité et à la direction de la force de cisaillement. Ces résultats montrent que les neurones de S1 encodent simultanément la direction et l’intensité des forces même en l’absence de glissement. Dans la seconde tâche, deux singes ont parcouru différentes surfaces avec le bout des doigts à la recherche d’une cible tactile, sans feedback visuel. Durant l’exploration, les singes, comme les humains, contrôlaient les forces et la vitesse de leurs doigts dans une plage de valeurs réduite. Les surfaces à haut coefficient de friction offraient une plus grande résistance tangentielle à la peau et amenaient les singes à alléger la force de contact, normale à la peau. Par conséquent, la somme scalaire des composantes normale et tangentielle demeurait constante entre les surfaces. Ces observations démontrent que les singes contrôlent les forces normale et tangentielle qu’ils appliquent durant l’exploration tactile. Celles-ci sont également ajustées selon les propriétés de surfaces telles que la texture et la friction. Des 230 neurones enregistrés durant la tâche d’exploration tactile, 96 (42%) ont montré une fréquence de décharge instantanée reliée aux forces exercées par les doigts sur la surface. De ces neurones, 52 (54%) étaient modulés avec la force normale ou la force tangentielle bien que l’autre composante orthogonale avait peu ou pas d’influence sur la fréquence de décharge. Une autre sous-population de 44 (46%) neurones répondait au ratio entre la force normale et la force tangentielle indépendamment de l’intensité. Plus précisément, 29 (30%) neurones augmentaient et 15 (16%) autres diminuaient leur fréquence de décharge en relation avec ce ratio. Par ailleurs, environ la moitié de tous les neurones (112) étaient significativement modulés à la direction de la force tangentielle. De ces neurones, 59 (53%) répondaient à la fois à la direction et à l’intensité des forces. L’exploration de trois ou quatre différentes surfaces a permis d’évaluer l’impact du coefficient de friction sur la modulation de 102 neurones de S1. En fait, 17 (17%) neurones ont montré une augmentation de leur fréquence de décharge avec l’augmentation du coefficient de friction alors que 8 (8%) autres ont montré le comportement inverse. Par contre, 37 (36%) neurones présentaient une décharge maximale sur une surface en particulier, sans relation linéaire avec le coefficient de friction des surfaces. La classification d’adaptation rapide ou lente des neurones de S1 n’a pu être mise en relation avec la modulation aux forces et à la friction. Ces résultats montrent que la fréquence de décharge des neurones de S1 encode l’intensité des forces normale et tangentielle, le ratio entre les deux composantes et la direction du mouvement. Ces résultats montrent que le comportement d’une importante sous-population des neurones de S1 est déterminé par les forces normale et tangentielle sur la peau. La modulation aux forces présentée ici fait le pont entre les travaux évaluant les propriétés de surfaces telles que la rugosité et les études touchant à la manipulation d’objets. Ce système de référence s’applique en présence ou en absence de glissement entre la peau et la surface. Nos résultats quant à la modulation des neurones à adaptation rapide ou lente nous amènent à suggérer que cette classification découle de la manière que la peau est stimulée. Nous discuterons aussi de la possibilité que l’activité des neurones de S1 puisse inclure une composante motrice durant ces tâches sensorimotrices. Finalement, un nouveau cadre de référence tridimensionnel sera proposé pour décrire et rassembler, dans un même continuum, les différentes modulations aux forces normale et tangentielle observées dans S1 durant l’exploration tactile.