Evaluation of mechanical and thermal properties after chemical degradation of PVC and HDPE geomembranes

Chemical compatibility between geomembranes and site-specific waste liquids should be assessed since the waste liquids are highly complex mixtures. This paper presents some considerations about the chemical compatibility of geomembranes and some results of mechanical tests in HDPE and PVC geomembranes that were exposed to leachate and chemical residue (niobium). PVC and HDPE geomembranes of two thicknesses were tested: 1.0, 2.0 mm (PVC) and 0.8, 2.5 mm (HDPE). The results obtained show that after exposure the PVC geomembranes (1.0, 2.0 mm) were more rigid and stiffer than fresh samples. The HDPE geomembranes, on the other hand, when exposed to leachate and niobium residue presented increases in deformation. Melt flow index (MFI) tests were also carried out to verify the oxidation. © 2013 ejge.

Preparation of films from aluminum acetylacetonate by plasma sputtering

Aluminum acetylacetonate has been reported as a precursor for the deposition of alumina films using different approaches. In this work, alumina-containing films were prepared by plasma sputtering this compound, spread directly on the powered lowermost electrode of a reactor, while grounding the substrates mounted on the topmost electrode. Radiofrequency power (13.56 MHz) was used to excite the plasma from argon atmosphere at a working pressure of 11 Pa. The effect of the plasma excitation power on the properties of the resulting films was studied. Film thickness and hardness were measured by profilometry and nanoindentation, respectively. The molecular structure and chemical composition of the layers were analyzed by Fourier transform infrared spectroscopy and energy dispersive spectroscopy. Surface micrographs, obtained by scanning electron microscopy, allowed the determination of the sample morphology. Grazing incidence X-ray diffraction was employed to determine the structure of the films. Amorphous organic layers were deposited with thicknesses of up to 7 μm and hardness of around 1.0 GPa. The films were composed by aluminum, carbon, oxygen and hydrogen, their proportions being strongly dependent on the power used to excite the plasma. A uniform surface was obtained for low-power depositions, but particulates and cracks appeared in the high-power prepared materials. The presence of different proportions of aluminum oxide in the coatings is ascribed to the different activations promoted in the metalorganic molecule once in the plasma phase. Copyright © 2013 John Wiley & Sons, Ltd. Copyright © 2013 John Wiley & Sons, Ltd.

Theoretical and experimental study of the excitonic binding energy in GaAs/AlGaAs single and coupled double quantum wells

This paper discusses the theoretical and experimental results obtained for the excitonic binding energy (Eb) in a set of single and coupled double quantum wells (SQWs and CDQWs) of GaAs/AlGaAs with different Al concentrations (Al%) and inter-well barrier thicknesses. To obtain the theoretical Eb the method proposed by Mathieu, Lefebvre and Christol (MLC) was used, which is based on the idea of fractional-dimension space, together with the approach proposed by Zhao et al., which extends the MLC method for application in CDQWs. Through magnetophotoluminescence (MPL) measurements performed at 4 K with magnetic fields ranging from 0 T to 12 T, the diamagnetic shift curves were plotted and adjusted using two expressions: one appropriate to fit the curve in the range of low intensity fields and another for the range of high intensity fields, providing the experimental Eb values. The effects of increasing the Al% and the inter-well barrier thickness on E b are discussed. The Eb reduction when going from the SQW to the CDQW with 5 Å inter-well barrier is clearly observed experimentally for 35% Al concentration and this trend can be noticed even for concentrations as low as 25% and 15%, although the Eb variations in these latter cases are within the error bars. As the Zhao's approach is unable to describe this effect, the wave functions and the probability densities for electrons and holes were calculated, allowing us to explain this effect as being due to a decrease in the spatial superposition of the wave functions caused by the thin inter-well barrier. © 2013 Elsevier B.V.

Mechanisms Involved in the Beneficial Effects of Spironolactone after Myocardial Infarction

Introduction:Our objective was to analyze the effect of spironolactone on cardiac remodeling after experimental myocardial infarction (MI), assessed by matricellular proteins levels, cardiac collagen amount and distribution, myocardial tissue metalloproteinase inhibitor-1(TIMP-1) concentration, myocyte hypertrophy, left ventricular architecture, and in vitro and in vivo cardiac function.Methods:Wistar rats were assigned to 4 groups: control group, in which animals were submitted to simulated surgery (SHAM group; n=9); group that received spironolactone and in which animals were submitted to simulated surgery (SHAM-S group, n=9); myocardial infarction group, in which animals were submitted to coronary artery ligation (MI group, n=15); and myocardial infarction group with spironolactone supplementation (MI-S group, n=15). The rats were observed for 3 months.Results:The MI group had higher values of left cardiac chambers and mass index and lower relative wall thicknesses compared with the SHAM group. In addition, diastolic and systolic functions were worse in the MI groups. However, spironolactone did not influence any of these variables. The MI-S group had a lower myocardial hydroxyproline concentration and myocyte cross-sectional area compared with the MI group. Myocardial periostin and collagen type III were lower in the MI-S group compared with the MI-group. In addition, TIMP-1 concentration in myocardium was higher in the MI-S group compared with the MI group.Conclusions:The predominant consequence of spironolactone supplementation after MI is related to reductions in collagens, with discrete attenuation of other remodeling variables. Importantly, this effect may be modulated by periostin and TIMP-1 levels. © 2013 Minicucci et al.

Análise fatorial exploratória aplicada a dados de avaliação do estado nutricional de idosos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo das propriedades dielétricas e de bloqueio das monocamadas automontadas

Pós-graduação em Biotecnologia - IQ

A influência da prática de atividade física regular na qualidade de vida e na composição corporal de portadores de osteoartrite

Pós-graduação em Alimentos e Nutrição - FCFAR

Avaliação da resistência á flexão de cerâmicas dentais Y-TZP: efeito de material e espessura

Pós-graduação em Ciências Odontológicas - FOAR

Estudo da estabilidade e da capacidade resistente de painéis estruturais do sistema construtivo Light Steel Framing

Pós-graduação em Engenharia Civil - FEIS

Determinação teórico-experimental da rigidez ao cisalhamento devido à restrição das telhas conectadas nas terças

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação nutricional inicial e evolutiva de pacientes com injúria renal aguda

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação nutricional, da capacidade funcional e do estresse oxidativo de idosos da cidade de Botucatu - SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evolução petrogenética das rochas máficas / ultramáficas na área ao sul do craton São Francisco, entre as cidades de Fortaleza de Minas e Jacuí - MG

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Processos, fácies e geometria do sistema turbidítico da formação Taciba/Membro Rio Segredo, faixa aflorante norte catarinense

Pós-graduação em Geociências e Meio Ambiente - IGCE

Rochas basálticas da formação serra geral no município de Araçatuba, estado de São Paulo

Pós-graduação em Geologia Regional - IGCE