Modelo tectono-estrutural dos campos de petróleo Namorado, Cherne e Albacora

The main goal in this research is a tectono-estructural characterization of the Cherne, Albacora and Namorado Fields, located at Campos Basin, in order to investigate the relationship between the geologic evolution and the rock´s physical properties of the reservoir, and how they affect the hydrocarbon accumulation in those fields. Well correlations show that the inferior turbidites have a regional lateral continuity. Basic petrophysics analysis, calculated here, shows that the three fields present porosity values that range from 15 to 20%, shale volume range from 26 to 30% and formation water saturation range from 23 to 45%, based on formation water resistivity dada from Albacora Field. Petrophysics maps feature a trend in Albacora Field that increase the porosity values to SE, and in Cherne and Namorado Field the trend increase towards N. Seismic horizons where interpreted between the first appearance of the Namorado Sandstone and the top of Quissamã Formation. This interval presents normal listric faulting, in Cherne and Namorado Field with NWSE and NE-SW direction, and sedimentation trend to NW-SE, in Albacora Field the faulting presents a NNE-SSW and N-S direction, with a sedimentation trend to NE-SW. Seismic attribute maps present amplitude anomalies close to the producing wells, and on Namorado Field, it indicates a potential hydrocarbon accumulation in the NE region. For each field is indicated laboratory tests for a better characterization of the petrophysical properties, since that they don’t form the same reservoir level, therefore, not influencing the water saturation calculation

Geologia de uma área na porção centro leste da folha Cássia (1:50.000), MG

This study aimed the geological characterization at scale 1:50.000 of an area belonging to the southern sector of the Brasilia Belt, located in the western portion of the Passos Nappe, near the town of Cássia, MG. In this region, outcrops rock types belonging to Araxá Group, composed of metasediments associated with metavolcanics which form a tectonometamorphic terrain of great importance for understanding the geological evolution of southeast and midwest regions of Brazil. With the development of work was possible to group the rocks in 10 lithostratigraphic units and had been identified 3 different zones of metamorphism generated during the peak metamorphism. The structural pattern of the area shows that the main foliation has average dip 30 ° NW and mineral lineation parallel to the stretching direction with 290 °. Still, we can conf irm that this inverse gradient metamorphic rocks of the Passos Nappe, described by several authors. Also, were seen lithotypes of economic interest, some already in exploitation, such as clay and sand, and other mineral commodities, which are occurring and can be used: quartz, quartzite, garnet, kyanite, rutile and zircon.

Caracterização geológica do perfil laterítico no município de Rondon do Pará, bloco sul do projeto Alumina Rondon

This completion of course work has as its object of study the Bauxite Province of Paragominas regarded as the richest Amazon bauxite province and whose genesis is related to laterization processes responsible for the formation of mineral deposits of the Rondon Alumina Project, designed to assess areas in the southeast of Pará State, for mineral resources exploration of bauxite, which is the main source of aluminum in the country. Located in the region of Rondon do Pará - PA, the study area is geologically inserted in Lithostratigraphic Unit called Cobertura Laterítica Matura (Mature Lateritic Cover), formed by alteration of paleotropics Cretaceous siliciclastic rocks, and its geomorphology corresponds to a broad plateau with displays of representative profiles of the processes that acted in the region. In this context, the present research aims to characterize the geological evolution of the laterite profile, with detailed studies in the area, geological description of the formations from the bauxite surfaces, and mineralogical composition litochemical of different horizons that were correlated and deployed in an evolutionary model compatible with its traits. The data collected during the analysis subsidized metalogenetic understanding of the processes that acted in the enrichment of aluminum and iron as well as the redistribution of the latter modified profile. The results and information were embodied in the form of geological characterization of the different constituents of mineral associations of bauxite horizons, similarities or differences in both textural and structural aspects, in order to propose a evolutionary model with retaken of gibbsitization processes

Caracterização estrutural do Lineamento de Piúma e sua influência na porção norte da Bacia de Campos

The detailed study of the Brazilian continental margin basins became possible with the advancement of geophysical tools, with emphasis on seismic reflection. Characterizing the structural and stratigraphic elements of Brazil’s marginal basins they realized that there was a relationship with structures present on the adjacent continental basement. So many works began to be made to understand this relationship and know the major factors that influenced the evolution of the continental margin. The study area of this work includes the northern portion of the Campos Basin and the continental outcropping adjacent areas, which corresponds to the northern of Rio de Janeiro state and the southern of Espirito Santo state. This area stands an important structural feature of NW-SE direction with a projection to the Campos Basin called Lineamento de Piúma. The outcropping basement rocks belongs to the Ribeira Belt which was bonded to other mobile bands forming the continent Western Gondwana during the Brasiliano Cycle, which later fragmented giving rise to the Atlantic Ocean. The opening of the ocean results on the formation of the marginal basins of Brazil. These basins have continental, transitional and marine facies. On Campos Basin the continental phase resulted on the formation of horsts and grabens bounded by synthetic and antithetic faults. Continuing rifting formed the saline lakes that deposited siliciclastic and carbonate sediments. The transitional phase resulted on thick packages consist of evaporites (halite and anhydrite) that was deposited in lagoon environment, tectonically quiet arid and semi-arid. The marine phase it deposited siliciclastic and carbonate in the Campos Basin resulting in shales, marls, limestones, ritmito, turbidites, sandstones and others. The objective of this study is to investigate the possible continuation... (Complete abstract click electronic access below)

Aspectos petrográficos dos carbonatos da Formação Riachuelo - Albiano, bacia de Sergipe

The carbonatic rocks have great importance in petroleum geology, since most hydrocarbons reservoirs in the world are associated to this kind of rock. The new giant petroleum fields discovered in the Brazilian southeast Atlantic margin are directly connected to calcareous rocks, which are subjacent to the Aptian evaporite pack. This demand an increase in the number of geologists able to study such deposits. The Aptian carbonatic platform is completely exposed only in the Sergipe-Alagoas Basin. Therefore, it works as a natural laboratory to the study and understanding of this kind of rock. The Sergipe Basin is situated in the east Brazilian coast, and has its evolutional history is intimately related to the formation of the South Atlantic Ocean, through the break-up of the Gondwana supercontinent. The marine sequence of the Brazilian marginal basins is of Albian age and is marked by the development of carbonatic platforms. In doing so, this paper aims to analyze the Albian limestones from Riachuelo Formation of the Sergipe Basin. The project gave to the student the opportunity to increase his knowledge in carbonates, due to the laboratory and outdoor activities. The studied deposits, within a regional outline, were petrografically described, allowing interpretations about the evolution of the former South Atlantic Ocean. Ten points were visited where samples were collected for making of thin sheets. In this work several carbonatic facies were identified totaling 116 laminates described.

Análise de fácies sedimentares e de paleocorrentes das sequências inferiores do grupo Itararé, Centro-Leste do estado de São Paulo

The Itararé Group is the record of one of the most significant glaciation events of the Gondwana. Of neocarboniferous-eopermian age, this unit has facies associations interpreted as resulted from shallow marine settings with glacial and deglacial water influence. The role of glaciers on the tectonic-sedimentary processes of the Itararé Group is striking, as typical facies such as diamictites, tilites, shales and rhythmites with dropstones are generated, besides the existence of glacially striated and polished surfaces. This work had as main goal to contribute to the geological knowledge of the Itararé Group in the central eastern portion of São Paulo State, using as basis outcrops from Itu, Salto and Porto Feliz, and also pertinent bibliographic data and well profiles located in the surrounding areas. About the stratigraphic framework, genetic association and paleogeography of these deposits, this work concludes that the area studied comprises the basal section of the Itararé Group. The stacking of the facies recognized during the field work begins with the striated and polished surfaces of the basement, described in Salto, superposed by tilites and diamictites with glacial movement features. Over these are the turbidites from Itu, associated with the glacier retreat. The outcrops of Porto Feliz are at the top of this succession, with deposits generated by flows with lateral and vertical variations, sometimes with prevalence of tractive conditions, and sometimes with sediments transported largely by suspension. Paleocurrent measurements show main flow directions towards NW, the same as glacial striae, suggesting the influence of reworking of sediments by the meltwater during deglacial periods

Mapeamento geológico e petrografia do alvo T-578 - Greenstone Belt Pilar de Goiás (Pilar de Goiás - GO)

The study area is located in the geological parameters of the Pilar de Goiás Greenstone Belt (GO), it is part of the Pilar de Goias Group’s meta-volcano-sedimentary sequence. This is a homoclinal package constituted by terrigenous metassediments containing intercalations of meta-ultramafic rocks and iron formations. The units that were informally named in this work, are interpreted as belongs to the Serra do Moinho Formation. Through mineralogical associations the area’s metamorphism were classified as high greenschist facies garnet zone. Prior to this work were detected in the area, through soil samples, some auriferous anomalies. One of the objectives of this work is the detection of possibles hidrotermal alterations related to these anomalies presents in the study area

Sucessão estratigráfica e paleoambientes dos microbialitos proterozóicos do membro sumidouro, formação lagamar, grupo Vazante, na fazenda Sumaré, em Lagamar - MG

Microbialites (irregular agglutinated grains, laterally continuous mats and stromatolites) occur in small, nearly continuous outcrops over a ~60 m-thick carbonate interval of the Sumidouro Member, Lagamar Formation, Vazante Group, Meso-Neoproterozoic, on the Sumaré Farm, in Lagamar (MG, Southeastern Brazil). Diversified stromatolites formed under shallow, high energy conditions predominate and exhibit frequent lateral and vertical changes, including probable bioherm borders. In the lower part of the interval, coniform columnar stromatolites (Conophyton), representative of the deepest and/or calmest settings, are common. Higher up, narrow subcylindrical unbranched forms become abundant and may grade to forms with subparallel dichotomous or multiple divergent branches. The microbialites are apparently organized in shallowing upward cycles

Caracterização petrográfica das zonas de alteração hidrotermal associadas aos pegmatitos da mina Bom Futuro, Rondônia

The Bom Futuro tin deposit is located in Ariquemes, north-central state of Rondônia. Since its discovery in the late 80s, the tin deposit of Bom Futuro has been explored and considered one of the leading Brazilian producers of cassiterite, exploring it mainly in secondary deposits (placers) in the vicinity of the hill Bom Futuro. The primary mineralization occurs in the contacts between quartz veins and pegmatites with the rocks of the hill and its exploitation has been the goal of new studies in the area. These bodies occur in all rock types of the hill, leading edges of hydrothermal alteration with each rock. The focus of the study is the characterization of hydrothermal alteration through the analysis of the edges of pegmatitic veins intruded on each of the main rock types found on the hill Bom Futuro, which are: biotite gneiss, biotite amphibolite, subvolcanic breccia, topaz leucogranite, topaz leucoriolito and micro melassienito porphyry. The analysis and comparison showed familiarities between the edges of alteration encountered, and possible subdivision into three main zones: the inner zone or the vein itself, intermediate zone or transition zone and the change zone where the passage of hydrothermal features to rocks features is gradual. The cassiterite and sphalerite were found scattered in three zones, however in larger quantities in the intermediate zone, near the contact

Estudo da influência do lineamento Tibagi e Sinclinal de Torres na estruturação da porção norte da bacia de Pelotas

The area of this work is located along the Northern portion of the Pelotas´s basin. The onshore region extends from the Southern portion São Paulo State to the North of Rio Grande do Sul State, with a total area of 440 530 km ². The objective of the research is to characterize the main geological structures of the outcropping basement in the Paraná Basin and its correlation with the offshore portion of the Pelotas Basin. The characterization was performed through the integration of surface (SRTM images and outcrops) and subsurface data (seismic data and well logs), the method includes the use of remote sensing techniques and seismic interpretation. The main structures to be analyzed are the Tibagi Lineament and the “Torres Syncline in order to verify its influence on the geological evolution and deformation of the basin. As result, it was identified the continuity of the both structures inside the offshore basin (Pelotas Basin); but only the Tibagi Lineament represents an important structural feature in the offshore basin. In this sense, the Tibagi lineament shows a NW-SE direction along the both basins (Pelotas and Paraná) and it is defined by drainages and relief on the continental portion. It was classified as a graben structure limited by normal faults and it also was verified a trend of faults inside the lineament that cuts all the sedimentary package of Itararé Group from Paraná Basin. The Torres syncline is a structure that connects the arches of Ponta Grossa and Rio Grande, showing NW-SE orientation and a low angle dip in the NW direction. Its projection into the Pelotas Basin was not recognized by the methods applied in this work, because a preliminary analyze indicates that its projection corresponds to a structural high inside the Pelotas Basin

Caracterização petrográfica dos alvos Hidrotermalitos Norte e Sul, Suruca e porção NW da Mina de Chapada - Alto Horizonte, GO

Main occurrence of Cu-Au in Goias Magmatic Arc, the Chapada mine fits into the geological context of the Brasilia Fold Belt, specifically in the Mara Rosa Magmatic Arc. Four targets, named Hidrotermalito Norte and Sul, NW Chapada Mine Portion and Suruca, are situated in this context, which includes ortogneisses and rocks from the Mara Rosa volcanic-sedimentary sequence. All these targets have been studied due to the possibility of presenting a great potential in Cu-Au, as well as the Chapada mine. Hidrotermalitos Norte and Sul targets presents four lithological sequences, which were identified as: quartz-muscovite schist; muscovite quartzites and kyanite quartzites; quartz-biotite-amphibole schist with pyrite and epidote-amphibole-biotite gneisses with muscovite; muscovite-biotite gneisses. They are metamorphosed to amphibolites facies and retrogressive greenschist facies. Sulfetation represented mainly by pyrite. In the NW Chapada Mine Portion, three main lithological groups were identified and classified as biotite gneisses; honblende-quartz-biotite-schist; amphibolites, with the first group metamorphosed in greenschist facies (low grade), and the other two groups metamorphosed in amphibolites facies, with subsequent retrogressive metamorphism in greenschist facies. Sulfetation is represented by chalcopyrite and pyrite. Finally, also three main lithological groups were identified in the Suruca target, classified as garnet-chlorite-epidote-eiotite gneiss; biotite gneiss and chlorite-biotite gneiss with epidote and muscovite; muscovite-quartz schist, all them metamorphised in amphibolites, with retrometamorphism in greenschist facies. Sulfetation represented by pyrite and sphalerite

Simulação numérica de fluxo de águas subterrâneas na bacia do Rio Grande (BA)

The Urucuia Aquifer System represents a strategic water source in western Bahia. Its baseflow is responsible for the flow rate of the main tributaries of São Francisco river left bank in the dry season, including the Rio Grande, its main tributary in Bahia state. This river has a hydrological regime heavily affected by groundwater and is located in a region with conflicts about water resources. The aquifers geology is constituted by neocretacious sandstones of Urucuia Group subdivided in Posse Formation and Serra das Araras Formation. The embasement is formed by neoproterozoic rocks of Bambuí Group. This work focuses on an important tool application, the mathematical model, whose function is represent approximately and suitably the reality so that can assist in different scenarios simulations and make predictions. Many studies developed in this basin provided the conceptual model basis including a full free aquifer, lithological and hydraulical homogeneity in entire basin, null flux at plateau borders and aquifer base. The finite element method is the numerical method used and FEFLOW the computational algorithm. The simulated area was discretized in a single layer with 27.357,6 km² (314.432 elements and 320.452 nodes) totaling a 4.249,89 km³ volume. Were utilized 21 observation wells from CERB to calibrate the model. The terrain topography was obtained by SRTM data and the impermeable base was generated by interpolation of descriptive profiles from wells and electric vertical drilling from previous studies. Works in this area obtained mean recharge rates varying approximately from 20% to 25% of average precipitation, thus the values of model recharge zones varying in this range. Were distributed 4 hydraulic conductivity zones: (K1) west zone with K=6x10-5 m/s; (K2) center-east zone with K=3x10-4 m/s; (K3) far east zone with K=5x10-4 m/s; e (K4) east-north zone with K=1x10-5 m/s. Thereby was incorporated to the final conceptual model...

Interpretação tectono-estratigráfica do reservatório Quissamã (Eo-meso-albiano) nos campos de Pampo, Bicudo e Bonito, Bacia de Campos

Hydrocarbon accumulations occur in marine carbonate reservoirs of Quissamã Formation (early to midlle Albian), southwest Campos Basin. We investigated Pampo, Bicudo and Bonito fields, in order to understand the tectono-structural framework of oncolite/bioclast coarse-grained calcarenite reservoir and the calcilutite-marl-shale sealing interval (Late Albian to Turonian). The database of eleven wells from those fields allowed to elaborate structural sections correlating the Macaé Group – both Quissamã reservoir and Outeiro seal, the latter corresponding to the tectonic deepening phase of basin evolution. Based on density and electric logs, it was prepared structural sections of the carbonate reservoirs with consequent identification of porous zones and oil-water contacts. An extensive 3-D seismic database (~300 Km2) allowed to map three reflectors which represent the limiting units of Macaé Group

Caracterização metamórfica do Greenstone Belt de Guarinos - GO

The study area comprises Guarinos Greenstone Belt which is located in the centralwest state of Goias and has an approximate size of 280 km2. The present work has as main objective to characterize the metamorphism of the greenstone belt and the relationship between the tectonic events and the metamorphism. For the execution of the work we used data collected in the course Geological Mapping of Crystalline Area of the geology course of UNESP, classes 2009 and 2010, the data collected by Alex Choupina Joaquim Andrade Silva in his master's thesis and the information collected in field in the study area. This compilation of data allows approximately 200 thin sections have been evaluated and allowed the construction of the metamorphic map in scale 1:125.000, also allowed the preparation of the geological map in scale 1:125.000 greestone belt, based on 1:25.000 scale maps performed by students of UNESP and the mapping conducted by Silva (2011). The study area was divided into two tectonic compartments depending on the Shear Zone Engenho Velho that longitudinally crosses study area, with direction approximately NW-SE. The west compartment is bordered by granite-gneiss complex and the east compartment, seems thicker to the south and narrows gradually towards the north and its structure is seen in general as a great monoclinal with NW-SE direction with trim to SW, this way your stack was considered as a package of rocks at the base and metaultramafic metamafic the top, with a second package in tectonic contact, which is composed of detrital and chemical metasedimentary rocks. The east compartment is represented by the intrusion of a large granitic body surrounded by amphibolites and metasediments, is bounded on the east by a granite-gneiss complexes through thrust fault, and is bounded on the west by the other compartment. The structure of the compartment is seen as a major axis oriented roughly... (Completo abstract click electronic access below)

Análise de dados pedogeoquímicos de multielementos visando o refinamento de mapeamento geológico de detalhe em alvos de Pb-Zn nos municípios de Adrianópolis, Cerro Azul e Tunas do Paraná (Vale do Ribeira, PR)

In order to to research, the region of Perau, base metal mineralization, Grupo Votorantim Metals conducted a soil sampling on targets predetermined holding its chemical analysis. These reviews have been provided by the company for this work was to evaluate the potential use of these data pedogeochemical multi-element for refinement of the work of geological mapping. We selected six targets: Varginha, Salvador, Guararema Taquara Lisa and Coffin of Mendes, in the municipalities of Adrianople, Cerro Azul and Tunas do Paraná, located in Vale do Ribeira (PR). Both have about 10 km2 and situated in the geological context of the Fold Belt Terrane and the Massif de Joinville. The main rock types are present metasedimentary rocks of low to medium grade metamorphic, interspersed the amphibolites ortoderivados, both belonging to the Complex Perau, gneisses and migmatitic Complex. Applied to the geochemical data descriptive statistical techniques (variogram, kriging and histogram). From the correlation between the distributions of elements with the geological data, we could assess the potential of the proposed methodology.