Wear attributes of cashmere single jersey knitted fabrics blended with high and low crimp superfine merino wool

In a replicated experiment, we investigated the impact of cashmere in blends with superfine wools on the wear attributes of single jersey knitted fabrics. We also investigated the relative performance of low crimp/low fiber curvature superfine wool when compared with cashmere and also when compared with traditional high crimp/high fiber curvature superfine wool in pure and blended knitted fabrics. Wool type, blend ratio and fabric structure affected fabric air permeability, resistance to pilling and change in appearance, relaxation shrinkage, hygral expansion, and dimensional stability during laundering. The responses to variation in fiber crimp were much greater than previously reported. The fabric properties of low crimp wool differed significantly from those made from high crimp wool, and low crimp wool fabric properties differed significantly from, but were closer to, the fabric properties of cashmere, compared with high curvature wool.

Identifying depression and anxiety disorders in people presenting for substance use treatment

Objective: To identify the type and proportion of depressive and related mental health disorders in a group of individuals seeking outpatient treatment at an alcohol and other drug (AOD) service.
Design, setting and participants: A cross-sectional study using diagnostic interviews with 95 participants (56 men, 39 women) seeking treatment from an AOD service.
Main outcome measures: Mental health and substance disorders were measured using the Composite International Diagnostic Interview, Posttraumatic Stress Disorder Checklist, Beck Depression Inventory, and State–Trait Anxiety Inventory (Trait Version).
Results: This was a complex group with addiction, mental health and physical health conditions; 76% had a depressive disorder and 71% had an anxiety disorder. Most were diagnosed with at least two mental health disorders and 25% were diagnosed with four or more different disorders. Alcohol and cannabis use were the most commonly diagnosed AOD disorders. Further, those diagnosed with a drug use disorder reported significantly higher levels of depression compared with those with an alcohol-only disorder. Finally, 60% of the sample reported chronic health conditions, with over one third taking medication for a physical condition on a regular basis.
Conclusions: Primary care providers such as general practitioners are likely to be increasingly called on to assess, treat and/or coordinate care of patients with AOD disorders. We show that this group will likely present to their GP with more than one MJA 2011; 195: S60–S63 mental health disorder in addition to acute and chronic physical health conditions.

Changes in catch rates and length and age at maturity, but not growth, of an estuarine plotosid (cnidoglanis macrocephalus) after heavy fishing

The hypothesis that heavy fishing pressure has led to changes in the biological characteristics of the estuary cobbler (Cnidoglanis macrocephalus) was tested in a large seasonally open estuary in southwestern Australia, where this species completes its life cycle and is the most valuable commercial fish species. Comparisons were made between seasonal data collected for this plotosid (eeltail catfish) in Wilson Inlet during 2005-08 and those recorded with the same fishery-independent sampling regime during 1987-89. These comparisons show that the proportions of larger and older individuals and the catch rates in the more recent period were far lower, i.e., they constituted reductions of 40% for fish ≥430 mm total length, 62% for fish ≥4 years of age, and 80% for catch rate. In addition, total mortality and fishing-induced mortality estimates increased by factors of ~2 and 2.5, respectively. The indications that the abundance and proportion of older C. macrocephalus declined between the two periods are consistent with the perception of long-term commercial fishermen and their shift toward using a smaller maximum gill net mesh to target this species. The sustained heavy fishing pressure on C. macrocephalus between 1987-89 and 2005-08 was accompanied by a marked reduction in length and age at maturity of this species. The shift in probabilistic maturation reaction norms toward smaller fish in 2005-08 and the lack of a conspicuous change in growth between the two periods indicate that the maturity changes were related to fishery-induced evolution rather than to compensatory responses to reduced fish densities.

Computation and construction of vault geometry prototypes

Physical models and scaled prototypes of architecture play an important role in design. They enable architects and designers to investigate the formal, functional, and material attributes of the design. Understanding digital processes of realizing scaled prototypes is a significant problem confronting design practice. This paper reports on three approaches to the translation of Gaussian surface models into scaled physical prototype models. Based on the geometry of Eladio Dieste’s Gaussian Vaults, the paper reports on the aspects encountered in the process of digital to physical construction using scaled prototypes. The primary focus of the paper is on computing the design geometry, investigating methods for preparing the geometry for fabrication and physical construction. Three different approaches in the translation from digital to physical models are investigated: rapid prototyping, two-dimensional surface models in paper and structural component models using CNC fabrication. The three approaches identify a body of knowledge in the design and prototyping of Gaussian vaults. Finally the paper discusses the digital to fabrication translation processes with regards to the characteristics, benefits and limitations of the three approaches of prototyping the ruled surface geometry of Gaussian Vaults. The results of each of three fabrication processes allowed for a better understanding of the digital to physical translation process. The use of rapid prototyping permits the production of form models that provide a representation of the physical characteristics such as size, shape and proportion of the Gaussian Vault.

Improving the dispersion and mechanical properties of epoxy/carbon nanotube composites

The incorporation and uniform dispersion of carbon nanotubes (CNTs) in polymer matrix could facilitate engineers to create high performance nanocomposites that potentially compete with most advanced materials in nature. The unique combination of outstanding mechanical, thermal, and electrical properties of CNTs makes them excellent nanofillers for the fabrication of advanced materials. Successful enhancement in mechanical properties via reinforcement is expected only when the nanofillers are well dispersed in the polymer matrix. Moreover, the orientation as well as the CNT/matrix interfacial strength also determines the effective physical properties of the nanocomposites. However, CNTs typically assemble to give bundles, which are heavily entangled to each other with a high aspect ratio and a large π-electronic surface. In this work, we outline some preliminary results in preparing high performance epoxy composites. Composites with fine dispersion and superior mechanical properties were prepared using epoxy and multiwalled carbon nanotubes (MWCNTs). The fine dispersion of the nanocomposites can be identified in the high resolution SEM image shown in Figure 1. This method can provide an alternative route for the preparation of new structural and functional nanocomposites.

First year pre-service teachers' mathematical content knowledge : methods of solution to a ratio question

In this article, pre-service teachers' mathematics content knowledge is explored through the analysis of two items about ratio from a Mathematical Competency, Skills and Knowledge Test. Pre-service teachers' thinking strategies, common errors and misconceptions in their responses are presented and discussed. Of particular interest was the range and nature of common incorrect responses for one whole-whole ratio question. Results suggested pre-service teachers had difficulty interpreting a worded multi-step, ratio (scale) question, with errors relating to ratio and/or conversion of measurement knowledge. These difficulties reveal underdeveloped knowledge of mathematical structure and mathematical connections as well as an inability to deconstruct key components of a mathematical problem. Most pre-service teachers also lacked knowledge of standard procedures and methods of solutions.

Acute rheumatic fever associated with household crowding in a developed country

Background: Acute rheumatic fever (ARF) and its sequelae, chronic rheumatic heart disease, remain important causes of morbidity and mortality worldwide, but there is little recent information about risk factors. The aim of this study was to examine the association between ARF and household crowding in New Zealand between 1996 and 2005.

Methods: This ecologic study used hospitalization data and census data to calculate incidence rates by census area unit (CAU). Rates of ARF were examined in relation to individual factors (age, ethnicity) and area factors based on the CAU of home address (household crowding, New Zealand deprivation index, household income, and proportion of children aged 5–14 years). The multivariate relationship between ARF incidence and CAU-based variables was assessed using a zero-inflated negative binomial model.

Results: This study included 1249 new cases of ARF between 1996 and 2005. At the univariate level, ARF rates were associated with household crowding across all age groups and ethnicities. ARF rates were significantly and positively related to household crowding after controlling for age, ethnicity, household income, and the density of children in the neighborhood. The incidence rate ratio was 1.065 (95% confidence interval, 1.052–1.079) for the total population.

Conclusions: In New Zealand, ARF rates are associated with household crowding at the CAU level. This finding supports action to reduce household crowding to improve health and reduce health inequalities. Our conclusion could be further investigated using a case-control study.

Tuberculosis associated with household crowding in a developed country

Background: Tuberculosis (TB) remains an important infectious disease in New Zealand (NZ) and globally, but risk factors for transmission are still poorly understood. This research aimed to identify whether household crowding contributes to TB transmission in NZ.

Methods: This ecological study used TB surveillance and census data to calculate TB incidence rates by census area unit (CAU). Census data were used to determine CAU characteristics including proportion of household crowding (a bedroom deficit of one or more), proportion of population who are migrants born in high-TB-incidence countries, median household income, and deprivation level. A negative binomial regression model was used to estimate the association between TB incidence and household crowding.

Results: The analysis included 1898 notified TB cases for the 2000–4 period. Univariate analysis showed TB incidence at the CAU level was associated with household crowding, for the total population and for all ethnic and age groups. After adjusting for the covariates of household income, existing TB burden, and proportion of migrants from high-TB-incidence countries, multivariate analysis showed statistically significant associations between TB incidence and household crowding. The incidence rate ratio (IRR) was 1.05 (95% CI 1.02 to 1.08) in the total population and 1.08 (95% CI 1.04 to 1.12) for NZ-born people <40 years.

Conclusion: At the CAU level, TB incidence in NZ is associated with household crowding. An individual-based study (e.g. case–control) in recently infected cases (detected by molecular epidemiology techniques) is suggested to complement these findings. Reducing or eliminating household crowding could decrease TB incidence in NZ and globally.

Application of power functions to chromatographic data for the enhancement of signal to noise ratios and separation resolution

Chromatographic detection responses are recorded digitally. A peak is represented ideally by a Guassian distribution. Raising a Guassian distribution to the power ‘n’ increases the height of the peak to that power, but decreases the standard deviation by √n. Hence there is an increasing disparity in detection responses as the signal moves from low level noise, with a corresponding decrease in peak width. This increases the S/N ratio and increases peak to peak resolution. The ramifications of these factors are that poor resolution in complex chromatographic data can be improved, and low signal responses embedded at near noise levels can be enhanced. The application of this data treatment process is potentially very useful in 2D-HPLC where sample dilution occurs between dimension, reducing signal response, and in the application of post-reaction detection methods, where band broadening is increased by virtue of reaction coils. In this work power functions applied to chromatographic data are discussed in the context of (a) complex separation problems, (b) 2D-HPLC separations, and (c) post-column reaction detectors.

Controlled synthesis of TiO2 hierarchical nanofibre structures via electrospinning and solvothermal processes : photocatalytic activity for degradation of methylene blue

The present article describes a new titanium oxide‐based (TiO2) photocatalyst that shows promise for acceleration of dye degradation. A hierarchical TiO2 nanostructure comprising nanorods on‐nanofibres has been prepared using a sol–gel route and electrospinning. Calcination of electrospun nanobre mats was performed in air at 500 °C. The TiO2 nanofibre surface was then exploited as a ‘seeding ground’ to grow TiO2 nanorods by a solvothermal process in NaOH. The nanofibres had a diameter of approximately 100 nm while the nanorods were evenly distributed on the nanofibre surface with a mean diameter of around 50–80 nm. The hierarchical nanostructure showed enhanced photocatalytic activity when compared to pure TiO2 nanofibres. This improved efficiency in degrading methylene blue through the photocatalytic process was attributed to the larger specific surface area of the TiO2 nanostructures, as well as high surface‐to‐volume ratio and higher reactive surface resulting in enhanced surface adsorption and interfacial redox reaction.

Relationships between skin follicle characteristics and fibre properties of Suri and Huacaya alpacas and Peppin Merino sheep

We aimed to quantify the number, type and arrangement of skin follicles in Huacaya and Suri alpaca skin and correlate their follicle characteristics with fibre traits of harvested fibre and compared these relationships with those of Merino sheep. Fibre and skin samples were collected from the mid-side of 12 Huacaya alpacas, 24 Suri alpacas and 10 Merino sheep. The mean fibre diameter (MFD ± s.e.) of the Huacaya and Suri were: 35.5 ± 0.9 and 28.3 ± 1.0 μm, respectively. The follicle groups found for alpacas were very different from the normal trio of primary follicles found in sheep and goats. The follicle group of the alpacas consisted of a single primary follicle surrounded by a variable number of secondary follicles. The mean ± s.e. primary follicle density was 3.1 ± 0.3 and 2.7 ± 0.1 follicles/mm² for Huacaya and Suri, respectively. The mean ± s.e. secondary follicle density (SFD) was 13.7 ± 1.2 and 17.5 ± 0.6 follicles/mm² for Huacaya and Suri, respectively. The mean ± s.e. ratio of secondary to primary follicles (S/P ratio) was 5.1 ± 0.5 for the Huacaya and 7.3 ± 0.2 for the Suri alpacas. The sheep had higher S/P ratios and SFD, lower MFD and produced significantly heavier fleeces. The key correlations found between traits in alpacas include a negative correlation between SFD and MFD (r = –0.71, P = 0.001) and a negative correlation between S/P ratio and MFD (r = –0.44, P = 0.003) and a positive correlation between S/P ratio and total follicle density (r = 0.38, P = 0.010). The study revealed that important relationships exist between alpaca skin follicle characteristics and fibre characteristics. It was the number of secondary follicles in a group that imparts density and a corresponding reduced MFD.

Little evidence that condition, stress indicators, sex ratio, or homozygosity are related to landscape or habitat attributes in declining woodland birds

Habitat loss, fragmentation and degradation are drivers of major declines in biodiversity and species extinctions. The actual causes of species population declines following habitat change are more difficult to discern and there is typically high covariation among the measures used to infer the causes of decline. The causes of decline may act directly on individual fitness and survival, or through disruption of population processes. We examined the relationships among configuration, extent and status of native vegetation and three commonly used indicators of individual body condition and chronic stress (haemoglobin level, haematocrit, residual body mass condition index) in 13 species of woodland-dependent birds in south-eastern Australia. We also examined two measures of changes to population processes (sex ratio and individual homozygosity) in ten species and alleic richness in five species. We found little support for relationships between site or landscape characteristics and individual or population response variables, notwithstanding that our simulations showed we had sufficient power to detect relatively small effects. We discuss possible causes of the absence of detectable habitat effects in this system and the implications for the usefulness of individual body condition and easily measured haematological indices as indicators of the response of avian populations to habitat change. © 2012 The Authors.

Alcohol consumption and body composition in a population-based sample of elderly Australian men

Background: Alcohol is calorie dense, and impacts activity, appetite and lipid processing. The aim of this study was to therefore investigate the association between alcohol consumption and components of body composition including bone, fat and lean tissue.

Methods: Participants were recruited from a randomly selected, population-based sample of 534 men aged 65 years and older enrolled in the Geelong Osteoporosis Study. Alcohol intake was ascertained using a food frequency questionnaire and the sample categorised as nondrinkers or alcohol users who consumed B2, 3–4 or C5 standard drinks on a usual drinking day. Bone mineral density (BMD), lean body mass and body fat mass were measured using dual energy X-ray absorptiometry; overall adiposity (%body fat), central adiposity (%truncal fat) and body mass index (BMI) were calculated. Bone quality was determined by quantitative heel ultrasound (QUS).

Results: There were 90 current non-drinkers (16.9 %), 266 (49.8 %) consumed 1–2 drinks/day, 104 (19.5 %) 3–4 drinks/day and 74 (13.8 %) C5 drinks/day. Those consuming C5 drinks/day had greater BMI (?4.8 %), fat mass index (?20.1 %), waist circumference (?5.0 %), %body fat (?15.2 %) and proportion of trunk fat (?5.3 %) and lower lean mass (-5.0 %) than non-drinkers after adjustment for demographic and lifestyle factors. Furthermore, they were more likely to be obese than non-drinkers according to criteria based on BMI (OR = 2.83, 95 %CI 1.10–7.29) or waist circumference (OR = 3.36, 95 %CI 1.32–8.54). There was an inverse relationship between alcohol consumption and QUS parameters and BMD at the mid forearm site; no differences were detected for BMD at other skeletal sites.

Conclusion: Higher alcohol intake was associated with greater total and central adiposity and reduced bone quality.

Second-year pre-service teachers’ responses to proportional reasoning test items

A recent international study of pre-service teachers identified that proportional reasoning was problematic for pre-service teachers. Proportional reasoning is an important topic in the middle years of schooling and therefore it is critical that teachers understand this topic and can rely on their Mathematical Content Knowledge (MCK) when teaching. The focus of this paper is second-year Australian primary pre-service teachers’ MCK of real number items related to ratio, rate, proportion and proportional reasoning. This paper reports on strengths and weakness of pre-service teachers’ MCK when responding to test items; including a method suitable for analysing responses to five items and ranked by three levels of difficulty. The results revealed insights into their correct methods of solutions and common incorrect responses, identifying difficulty, where multiplication and division were required. The method of coding test items by difficulty ranking may assist with developing an appropriate learning trajectory, which will assist pre-service teachers develop their MCK of this and other difficult topics.

Researching maternal, neonatal and child health service use in rural and pastoralist Ethiopia: A key informant research approach

Like many nations in sub-Saharan Africa, Ethiopia has both a high neonatal mortality rate and maternal mortality ratio and is unlikely to meet Millennium Development Goals 4 and 5 by 2015. This working paper examines how Key Informant Research (KIR) in rural and pastoralist Ethiopia will identify facilitators and barriers to the use of maternal, neonatal and child health services. The methodology is informed by Participative Ethnographic Evaluation Research (PEER) and Key Informant Monitoring (KIM). Key Informant Research (KIR) training will provide research skills to Health Extension Workers (HEWs) and Non-government organisation (NGO) staff to enable them to develop research questions, collect data and participate in preliminary data analysis. This will enable the identification of strategies that improve the identification of risk, enhance early referral, increase access, affordability and acceptability of skilled birthing services in rural and pastoralist Ethiopia.