974 resultados para Pseudomonas putida
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Petroleum and its subproducts are considered a treat for the environmental quality because of the many environmental accidents that may occur during exploitation, transport and storage. A common remediation technique used in the contaminated areas is based on the use of surfactants, mainly the chemical ones, because they have low production costs. In the other hand, some microorganisms have indicate capacities of producing surfactants that emulsify substances and as result, offer a bigger contact surface for the microbiota degradation. This biossurfactants stand out in comparison with the chemical surfactants because they present lower micelar concentration values, are more tolerant for temperature and pH variation, because they are biodegradable, have low toxicity, higher emulsification and hydrocarbon solubilization index. In this way, after the surfactant application, a toxicity evaluation have to be made to identify the treatment effects. In soil, the activity of some microbial enzymes can show the environmental behavior of the contaminant under different treatment conditions. Dehydrogenase is one example of those enzymes that can demonstrate indirectly the effect of the pollutant on the soil microorganisms. The aim of this paper was to evaluate the toxicity after the addition of a surfactant and/or Pseudomonas aeruginosa LBI in soil contaminated by a mineral automotive lubricant. The previous mentioned bacteria are a potential biossurfactant (rhamnolipid) producer. In order to evaluate the toxicity, the dehydrogenase test was run. In this test, trifeniltetrazolium compound (TTC) after utilized as an electron acceptor, turns into trifenil formazan (TPF), that can be indirectly quantified using the absorbance measured by the spectrophotometer UV-visible. In this way, it was possible to quantify the dehydrogenase activity from the contaminated soil samples... (Complete abstract click electronic access below)
Resumo:
To isolate, to concentrate and to purify bacteriophages from isolates of P. aeruginosa; To observe the capacity of bacteriophages to infect isolates of P. aeruginosa susceptible and multiresitant to antimicrobial; To caractherize bacteriphages by electronic microscopy techniques. 10 isolates of Pseudomonas aeruginosa from LEMC culture collection were submitted to the experiments of ideal temperature for the lyse region appearance in the MaConkey culture plate and 2 extraction methods for the concentration of the phages, clorophorm (Silankorva) and filtration plus centrifugation (Bergan). Three infected clinical isolates of multiresistant P. aeruginosa an one susceptible isolate ( PA01) were evaluated by 3 transmission electron microscopy techniques to caractherize phages morphologically (“on grid”, “on drop” and direct extraction from the lyse region of the culture plate). The ideal temperature to obtain lyses region was 37°C. The stock solutions, obtained through the methodologies of Sillankorva and Bergan, had satisfactory results in infecting the multiresistant isolate and the negative control. Among the 3 techniques of electronic microscopy tested the direct from the lyse plate was the best to obtain the micrography of the phages
Resumo:
Os biossurfactantes apresentam inúmeras vantagens, como baixa toxicidade, biodegradabilidade e alta estabilidade, mas não são amplamente utilizados devido ao custo de produção. A utilização de substratos baratos, linhagens mutantes que associados à otimização das condições de cultivo pode levar a uma redução nos custos, possibilitando assim a substituição dos surfactantes sintéticos pelos biológicos. Uma maneira empregada para maximizar a produção dos biossurfactantes é a limitação de nutrientes. Os esforços empregados nesse sentido são direcionado para as proporções carbono: nitrogênio, entretanto os efeitos dos elementos traços são pouco conhecidos. Devido a esses fatores, o presente trabalho avaliou a importância dos seguintes elementos traços: ferro, zinco, cobalto, cobre, manganês e do sal citrato de sódio dihidratado, nas fermentações realizadas utilizando o mutante de Pseudomonas aeruginosa LBI 2A1. Para tanto foram realizadas fermentações em frascos Erlenmeyer, onde se utilizou diferentes concentrações desses elementos. A influência dos mesmos na produção de ramnolipídios foi constatada, uma vez que a produção desse biotensoativo foi aumentada em mais de três vezes alterando apenas a concentração de um único elemento traço (Fe). Os experimentos realizados permitem, também, inferir a respeito das melhores concentrações desses micronutrientes para a produção de ramnolipídios
Resumo:
Nanotechnology, the science of minuscule, has developed products which are able t o manipulate atoms and molecules that could be applied in the sterilization process of dental instruments. Objetives: The objective of the present study was to evaluate the self-cleaning action of TiO2 and Ag nanoparticles coating on dental instruments by the photocataliys process under UV and visible light irradiation. Material and method: Microbiologic tests were done using dental cement spatulas coated with TiO2 and Ag nanoparticles (one or three layers), and contaminated with 10 mcrl of Pseudomonas aeruginosa and Enterococcus faecalis, respectively. After contamination, they were exposed to ultraviolet light and visible light for 120 minutes. Next, they were transferred to and stored in test tubes with BHI (Brain Heart Infusion) and incubated in 35 to 37 °C. Checking times for bacterial growth and for control and retrieval tests were done at: 24, 48, 72 and 96 hours. Result: The Pseudomonas aeruginosa was inactive after 120 minutes of ultraviolet light irradiation, thus confirming the heterogeneous photocatalytic activity of TiO2 and Ag. The Pseudomonas aeruginosa was not inactivated under visible light irradiation and the Enterococcus faecalis was not inactivated under UV and visible light irradiation of the dental cement spatulas coated with TiO2 and Ag nanoparticles in the readings to 96 hours, showing bacterial growth. Conclusion: There were no influence of one or three layers of TiO2 and Ag nanoparticles coating of the spatulas in the results. The heterogeneous photocatalysis activity of TiO2 and Ag under UV light irradiation was confirmed for Pseudomonas aeruginosa but not under visible light. Enterococcus faecalis did not confirmed the photocatalytics activity of TiO2 and Ag under UV light irradiation and visible lights irradiation.
Resumo:
Transesterification of palm oil with ethanol catalyzed by Pseudomonas fluorescens lipase immobilized on epoxy-polysiloxane-polyvinyl alcohol composite (epoxy-SiO2-PVA) was performed in a continuous packed-bed reactor (PBR). Two strategies were used for improving the miscibility of the substrates: the addition of the organic solvent tert-butanol and the surfactant Triton X-100. Results were compared to those obtained in a solventless reactor, which displayed a biphasic system that passed through the reactor. Using this system, the ethyl ester yield of 61.6 +/- 1.2% was obtained at steady state. Both Triton X-100 and tert-butanol systems were found to be suitable to promote the miscibility of the starting materials; however, the use of Triton X-100 reduced the yield to levels lower than 20%, because of the enzyme desorption from the support surface, as confirmed by scanning electron microscopy analysis. The best performance was found for the reactor running in the presence of tert-butanol which resulted in a stable operating system and an average yield of 87.6 +/- 2.5%. This strategy also gave high biocatalyst operational stability, revealing a half-life of 48 days and an inactivation constant of 0.6 X 10(-3) h(-1).
Resumo:
Abstract Background A typical purification system that provides purified water which meets ionic and organic chemical standards, must be protected from microbial proliferation to minimize cross-contamination for use in cleaning and preparations in pharmaceutical industries and in health environments. Methodology Samples of water were taken directly from the public distribution water tank at twelve different stages of a typical purification system were analyzed for the identification of isolated bacteria. Two miniature kits were used: (i) identification system (api 20 NE, Bio-Mérieux) for non-enteric and non-fermenting gram-negative rods; and (ii) identification system (BBL crystal, Becton and Dickson) for enteric and non-fermenting gram-negative rods. The efficiency of the chemical sanitizers used in the stages of the system, over the isolated and identified bacteria in the sampling water, was evaluated by the minimum inhibitory concentration (MIC) method. Results The 78 isolated colonies were identified as the following bacteria genera: Pseudomonas, Flavobacterium and Acinetobacter. According to the miniature kits used in the identification, there was a prevalence of isolation of P. aeruginosa 32.05%, P. picketti (Ralstonia picketti) 23.08%, P. vesiculares 12.82%,P. diminuta 11.54%, F. aureum 6.42%, P. fluorescens 5.13%, A. lwoffi 2.56%, P. putida 2.56%, P. alcaligenes 1.28%, P. paucimobilis 1.28%, and F. multivorum 1.28%. Conclusions We found that research was required for the identification of gram-negative non-fermenting bacteria, which were isolated from drinking water and water purification systems, since Pseudomonas genera represents opportunistic pathogens which disperse and adhere easily to surfaces, forming a biofilm which interferes with the cleaning and disinfection procedures in hospital and industrial environments.
Resumo:
Epithelial cells in oral cavities can be considered reservoirs for a variety of bacterial species. A polymicrobial intracellular flora associated with periodontal disease has been demonstrated in buccal cells. Important aetiological agents of systemic and nosocomial infections have been detected in the microbiota of subgingival biofilm, especially in individuals with periodontal disease. However, non-oral pathogens internalized in oral epithelial cells and their relationship with periodontal status are poorly understood. The purpose of this study was to detect opportunistic species within buccal and gingival crevice epithelial cells collected from subjects with periodontitis or individuals with good periodontal health, and to associate their prevalence with periodontal clinical status. Quantitative detection of total bacteria and Staphylococcus aureus, Pseudomonas aeruginosa and Enterococcus faecalis in oral epithelial cells was determined by quantitative real-time PCR using universal and species-specific primer sets. Intracellular bacteria were visualized by confocal microscopy and fluorescence in situ hybridization. Overall, 33 % of cell samples from patients with periodontitis contained at least one opportunistic species, compared with 15 % of samples from healthy individuals. E. faecalis was the most prevalent species found in oral epithelial cells (detected in 20.6 % of patients with periodontitis, P = 0.03 versus healthy individuals) and was detected only in cells from patients with periodontitis. Quantitative real-time PCR showed that high levels of P. aeruginosa and S. aureus were present in both the periodontitis and healthy groups. However, the proportion of these species was significantly higher in epithelial cells of subjects with periodontitis compared with healthy individuals (P = 0.016 for P. aeruginosa and P = 0.047 for S. aureus). Although E. faecalis and P. aeruginosa were detected in 57 % and 50 % of patients, respectively, with probing depth and clinical attachment level ≥6 mm, no correlation was found with age, sex, bleeding on probing or the presence of supragingival biofilm. The prevalence of these pathogens in epithelial cells is correlated with the state of periodontal disease.
Resumo:
Bioconversion of ferulic acid to vanillin represents an attractive opportunity for replacing synthetic vanillin with a bio-based product, that can be label “natural”, according to current food regulations. Ferulic acid is an abundant phenolic compound in cereals processing by-products, such as wheat bran, where it is linked to the cell wall constituents. In this work, the possibility of producing vanillin from ferulic acid released enzymatically from wheat bran was investigated by using resting cells of Pseudomonas fluorescens strain BF13-1p4 carrying an insertional inactivation of vdh gene and ech and fcs BF13 genes on a low copy number plasmid. Process parameters were optimized both for the biomass production phase and the bioconversion phase using food-grade ferulic acid as substrate and the approach of changing one variable while fixing the others at a certain level followed by the response surface methodology (RSM). Under optimized conditions, vanillin up to 8.46 mM (1.4 g/L) was achieved, whereas highest productivity was 0.53 mmoles vanillin L-1 h-1). Cocktails of a number of commercial enzyme (amylases, xylanases, proteases, feruloyl esterases) combined with bran pre-treatment with steam explosion and instant controlled pressure drop technology were then tested for the release of ferulic acid from wheat bran. The highest ferulic acid release was limited to 15-20 % of the ferulic acid occurring in bran, depending on the treatment conditions. Ferulic acid 1 mM in enzymatic hydrolyzates could be bioconverted into vanillin with molar yield (55.1%) and selectivity (68%) comparable to those obtained with food-grade ferulic acid after purification from reducing sugars with a non polar adsorption resin. Further improvement of ferulic acid recovery from wheat bran is however required to make more attractive the production of natural vanillin from this by-product.
Resumo:
Although bacteria represent the simplest form of life on Earth, they have a great impact on all living beings. For example the degrader bacterium Pseudomonas pseudoalcaligenes KF707 is used in bioremediation procedures for the recovery of polluted sites. Indeed, KF707 strain is know for its ability to degrade biphenyl and polychlorinated biphenyls - to which is chemotactically attracted - and to tolerate the oxydative stress due to toxic metal oxyanions such as tellurite and selenite. Moreover, in bioremediation processes, target compounds can be easily accessible to KF707 through biofilm formation. All these considerations suggest that KF707 is such a unique microorganism and this Thesis work has been focused on determining the molecular nature of some of the peculiar physiological traits of this strain. The genome project provided a large set of informations: putative genes involved in the degradation of aromatic and toxic compounds and associated to stress response were identified. Notably, multiple chemotactic operons and cheA genes were also found. Deleted mutants in the cheA genes were constructed and their role in motility, chemotaxis and biofilm formation were assessed and compared to those previously attributed to a cheA1 gene in a KF707 mutant constructed by a mini-Tn5 transposon insertion and which was impaired in motility and biofilm development. The results of this present Thesis work, taken together, were interpreted to suggest that in Pseudomonas pseudoalcaligenes KF707 strain, multiple factors are involved in these networks and they might play different roles depending on the environmental conditions. The ability of KF707 strain to produce signal molecules possibly involved in cell-to-cell communication, was also investigated: lack of a lux-like QS system - which is conversely widely present in Gram negative bacteria – keeps open the question about the actual molecular nature of KF707 quorum sensing mechanism.
Resumo:
Die vorliegende Arbeit befasste sich mit der Charakterisierung molekularer Funktionen humaner Paraoxonase (PON) Enzyme, insbesondere die der Proteine PON2 und PON3 im Hinblick auf medizinisch-relevante Fragestellungen. Zum einen wurde die Rolle von PON3 in der Tumorgenese und zum anderen eine mögliche Schutzfunktion von PON2 und PON3 gegenüber P. aeruginosa Infektionen untersucht. Bereits seit dem Jahr 2000 ist die anti-oxidative Eigenschaft von PON3 bekannt, jedoch war der zugrundeliegende Mechanismus bisher ungeklärt. Im Rahmen dieser Arbeit wurde gezeigt, dass PON3 die Superoxid-Entstehung in den Mitochondrien abschwächt, wobei sie ihre anti-oxidative Eigenschaft vermutlich durch eine direkte Coenzym Q10-Interaktion in der inneren mitochondrialen Membran vermittelt. Dies führt zu weniger oxidativen Stress, zur Abschwächung mitochondrial-induzierter apoptotischer Signalwege und zur erhöhten Resistenz gegenüber Chemotherapeutika. Gleichzeitig wurde demonstriert, dass sich Tumorzellen diese anti-oxidative Eigenschaft zu Nutze machen. PON3 war in zahlreichen Tumorgeweben überexprimiert. Es konnte eine mögliche Funktion von PON3 als Tumormarker und Angriffspunkt in der Krebstherapie aufgezeigt werden. Die hier erlangten Daten liefern wertvolle Hinweise auf die Rolle von PON3 in Krebserkrankungen, welche eine Basis für zukünftige Analysen darstellen, die der Entwicklung neuer Krebstherapien dienen könnten. Ein weiterer Teil der Arbeit befasste sich mit der gegenseitigen Beeinflussung der Enzyme PON2 / PON3 und der für P.aeruginosa essentiellen Virulenzfaktoren Pyocyanin (PCN) und dem Lacton 3OC12. Erstmalig wurde gezeigt, dass PON3 zellschädigende PCN-Effekte abschwächen kann, nämlich die PCN-induzierte Superoxid-Produktion, NF-kB-Aktivierung und IL-8-Sekretion. PON2 schützt in gleicher Weise gegen PCN und hydrolysiert zugleich noch das Lacton 3OC12. Folglich sind PON2 und PON3 wichtige Bestandteile der angeborenen Immunität, werden jedoch durch eine 3OC12-induzierte Ca2+-Mobilisation inaktiviert. Weitere Analysen ergaben, dass die PON2-Inaktivierung wahrscheinlich über einen Ca2+ / Calcineurin / Calmodulin-abhängigen Signalweg erfolgt, welcher eine offenbar regulative Serin311-Dephosphorylierung in PON2 vermittelt. Ähnliches könnte für PON3 gelten und wird derzeit erforscht, da eine Stabilisierung der enzymatischen Aktivitäten von PON2 und PON3 der bakteriellen Virulenz entscheidend entgegen wirken könnte.
Resumo:
Il cancro batterico dell’actinidia causato da Pseudomonas syringae pv.actinidiae (Psa) suscita grande interesse a livello globale a partire dal 2008. La malattia è comparsa in Giappone e in due anni ha avuto una diffusione epidemica in tutte le aree di coltivazione mondiale di actinidia. Gravi perdite economiche hanno attirato l’attenzione internazionale su questa problematica e grandi sforzi sono stati rivolti allo studio di questo patosistema ancora poco conosciuto. E’ emerso infatti che il patogeno può rimanere in fase latente per lunghi periodi senza causare sintomi caratteristici nelle piante infette, e che dalla comparsa dei sintomi la pianta muore nell’arco di un paio d’anni. Il monitoraggio ed il controllo della situazione è perciò di fondamentale importanza ed è ancora più importante prevenire la comparsa di nuovi focolai di infezione. A questo proposito sarebbe opportuno l’impiego di materiale vegetale di propagazione non infetto, ma in molti casi questo diventa difficile, dal momento che il materiale impiegato è generalmente quello asintomatico, non analizzato precedentemente per la presenza del patogeno. Negli ultimi anni sono state perciò messe a punto molte tecniche molecolari per l’identificazione di Psa direttamente da materiale vegetale. L’obiettivo di questo lavoro è stato quello di studiare l’epidemiologia di Psa in piante adulte infette e di verificare l’efficacia di metodi di diagnosi precoce per prevenire la malattia. A tale scopo il lavoro sperimentale è stato suddiviso in diverse fasi: i) studio della localizzazione, traslocazione e sopravvivenza di Psa nelle piante, a seguito di inoculazione in piante adulte di actinidia di ceppi marcati Psa::gfp; ii) studio della capacità di Psa di essere mantenuto in germogli di actinidia attraverso sette generazioni di micropropagazione dopo l’inoculazione delle piante madri con lo stesso ceppo marcato Psa::gfp; iii) studio ed applicazioni di un nuovo metodo di diagnosi precoce di Psa basato sull’analisi molecolare del “pianto”.