Quality of Brazil nuts stored in forced aeration silos.

The traditional system of collection and storage of Brazil nut compromises seriously the quality of these almonds as it contributes to the high incidence of contaminants, like fungi of the genus Aspergillus, which can produce aflatoxins. In this study, the objective was to evaluate the influence of the storage period in studied conditions, on the physicochemical characteristics and on the microbiological contamination of Brazil nuts. The experimental was designed as completely randomized, considering as treatments the storage period (0 - control, 30, 60, 90, 120 and 150 days) with four replicates of 3 kg of Brazil nuts each. The samples were submitted to physicochemical and microbiological analysis. It was observed that almonds submitted to the storage had their moisture content reduced by 78.2% at 150 days of storage, however, this reduction was not fast enough to avoid surface contamination by filamentous and potentially aflatoxins producing fungi. The critical period of contamination occurred on the first 30 days of storage when there was an increase of the studied fungi, as well as B1 and total aflatoxin. The studied storage conditions were four times more effective in reducing the product moisture content than the traditional methods, however, pre-drying is necessary to avoid contamination of the product.

Effects of the orientation of the mountainside, altitude and varieties on the quality of the coffee beverage from the "Matas de Minas" region, brazilian Southeast.

Based upon qualitative parameters experiments, this study aims to investigate how the elements of the environment, where the coffee is produced, contribute to the final quality of the product. For the analyses, it was used approximately one kilogram of coffee cherry samples collected in 14municipalities previously chosen on the East side of the Minas Gerais State, Brazil. The coffee cherry samples were collected and analyzed for each of the two varieties in four levels of altitude for each exposure side of the mountain in relation to the Sun. The quality of the coffee was evaluated through the analysis of its physical characteristics and sensory analysis, popularly known as "Test of drink or Cupping" carried out by three tasters that belonging to the group of Q -Graders, according to the rules of national and international competitions of the Brazilian Association of Special Coffees (BSCA). Were performed analysis by means descriptive statistics, analysis of variance and multivariate analysis, all of them aiming to study the individual sensor y characteristics of quality of the coffee beverage from the ?Matas de Minas? region. Path coefficient analysis also was carried out for the partition of the phenotypic correlation coefficients into measures of direct and indirect effects, in order to determine the individual sensory characteristics that playeda major role in the beverage final score. The results demonstrat e that it is not possible to concl usively establish the differences among coffees evaluated with basis on varieties and environmental factors previously cited. It can be concluded that it is not recommended to associate the quality of coffee only to a specific factor whether from the environment or being it a specific of the culture of coffee. However, the cafes that were evaluated had intrinsic quality, which were derived from the specific characteristics of the ?Matas de Minas? region where they were grown.

The Behavior of Hydroxyl Units of Synthetic Goethite and its Dehydroxylated Product Hematite

The behavior of the hydroxyl units of synthetic goethite and its dehydroxylated product hematite was characterized using a combination of Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) during the thermal transformation over a temperature range of 180-270 degrees C. Hematite was detected at temperatures above 200 degrees C by XRD while goethite was not observed above 230 degrees C. Five intense OH vibrations at 3212-3194, 1687-1674, 1643-1640, 888-884 and 800-798 cm(-1), and a H2O vibration at 3450-3445 cm(-1) were observed for goethite. The intensity of hydroxyl stretching and bending vibrations decreased with the extent of dehydroxylation of goethite. Infrared absorption bands clearly show the phase transformation between goethite and hematite: in particular. the migration of excess hydroxyl units from goethite to hematite. Two bands at 536-533 and 454-452 cm(-1) are the low wavenumber vibrations of Fe-O in the hematite structure. Band component analysis data of FTIR spectra support the fact that the hydroxyl units mainly affect the a plane in goethite and the equivalent c plane in hematite.

The Scored Patient-Generated Subjective Global Assessment (PG-SGA) and its Association with Quality of Life in Ambulatory Patients Receiving Radiotherapy

OBJECTIVE: To evaluate the scored Patient-generated Subjective Global Assessment (PG-SGA) tool as an outcome measure in clinical nutrition practice and determine its association with quality of life (QoL). DESIGN: A prospective 4 week study assessing the nutritional status and QoL of ambulatory patients receiving radiation therapy to the head, neck, rectal or abdominal area. SETTING: Australian radiation oncology facilities. SUBJECTS: Sixty cancer patients aged 24-85 y. INTERVENTION: Scored PG-SGA questionnaire, subjective global assessment (SGA), QoL (EORTC QLQ-C30 version 3). RESULTS: According to SGA, 65.0% (39) of subjects were well-nourished, 28.3% (17) moderately or suspected of being malnourished and 6.7% (4) severely malnourished. PG-SGA score and global QoL were correlated (r=-0.66, P<0.001) at baseline. There was a decrease in nutritional status according to PG-SGA score (P<0.001) and SGA (P<0.001); and a decrease in global QoL (P<0.001) after 4 weeks of radiotherapy. There was a linear trend for change in PG-SGA score (P<0.001) and change in global QoL (P=0.003) between those patients who improved (5%) maintained (56.7%) or deteriorated (33.3%) in nutritional status according to SGA. There was a correlation between change in PG-SGA score and change in QoL after 4 weeks of radiotherapy (r=-0.55, P<0.001). Regression analysis determined that 26% of the variation of change in QoL was explained by change in PG-SGA (P=0.001). CONCLUSION: The scored PG-SGA is a nutrition assessment tool that identifies malnutrition in ambulatory oncology patients receiving radiotherapy and can be used to predict the magnitude of change in QoL.

Efficient microwave hydrothermal preparation of nanocrystalline anatase TiO2 colloids

Titanium dioxide nanocrystals are an important commercial product used primarily in white pigments and abrasives, however, more recently the anatase form of TiO2 has become a major component in electrochemical and photoelectrochemical devices. An important property of titanium dioxide nanocrystals for electrical applications is the degree of crystallinity. Numerous preparation methods exist for the production of highly crystalline TiO2 particles. The majority of these processes require long reaction times, high pressures and temperatures (450–1400 °C). Recently, hydrothermal treatment of colloidal TiO2 suspensions has been shown to produce quality crystalline products at low temperatures (<250 °C). In this paper we extend this idea utilising a direct microwave heating source. A comparison between convection and microwave hydrothermal treatment of colloidal TiO2 is presented. The resulting highly crystalline TiO2 colloids were characterised using Raman spectroscopy, XRD, TEM, and electron diffraction. The results show that the microwave treatment of colloidal TiO2 gives comparable increases in crystallinity with respect to normal hydrothermal treatments while requiring significantly less time and energy than the hydrothermal convection treatment.

Study on microwave dielectric properties of epoxy resin mixtures used for rapid product development

This paper presents a preliminary study on the dielectric properties and curing of three different types of epoxy resins mixed at various stichiometric mixture of hardener, flydust and aluminium powder under microwave energy. In this work, the curing process of thin layers of epoxy resins using microwave radiation was investigated as an alternative technique that can be implemented to develop a new rapid product development technique. In this study it was observed that the curing time and temperature were a function of the percentage of hardener and fillers presence in the epoxy resins. Initially dielectric properties of epoxy resins with hardener were measured which was directly correlated to the curing process in order to understand the properties of cured specimen. Tensile tests were conducted on the three different types of epoxy resins with hardener and fillers. Modifying dielectric properties of the mixtures a significant decrease in curing time was observed. In order to study the microstructural changes of cured specimen the morphology of the fracture surface was carried out by using scanning electron microscopy.

Exploring the effectiveness of virtual product placement on recall and recognition of new brands

This paper investigates the effectiveness of virtual product placement as a marketing tool by examining the relationship between brand recall and recognition and virtual product placement. It also aims to address a gap in the existing academic literature by focusing on the impact of product placement on recall and recognition of new brands. The growing importance of product placement is discussed and a review of previous research on product placement and virtual product placement is provided. The research methodology used to study the recall and recognition effects of virtual product placement are described and key findings presented. Finally, implications are discussed and recommendations for future research provided.

Guidelines on building design and operation to minimize air quality impacts from major roads in transit oriented development

Poor air quality has a huge detrimental effect, both economic and on the quality of life, in Australia. Transit oriented design (TOD), which aims to minimise urban sprawl and lower dependency on vehicles, leads to an increasing number of buildings close to transport corridors. This project aims at providing guidelines that are appropriate to include within City Plan to inform future planning along road corridors, and provide recommendations on when mitigation measures should be utilised.