Der Kauffunger Kalkstein (Bober-Katzbach Gebirge, Polen): Petrographie, Fossilinventar, Stratigraphie

In the Western Sudetes (Mts.) in SW Poland carbonate rocks occur which are well known in the older German literature as ’’Kauffung Limestone” or ’’Wojcieszow Limestone” in recent publications, respectively. They are intercalated in sedimentary (shales) and volcanic (greenstone) successions and are, presumed - due to the lack of index fossils - to be Cambrian in age. These deposits occur in a variety of isolated massifs in the Bober-Katzbach Mts. where they have been mined in many quarries in the past. In a single location (Polom quarry near Wojcieszow) they are exploited up until today. The predominantly calcitic rocks display a wide variety of different lithologies and are, consequently, subdivided into the following lithological units which differ in textural characteristics, mineral constituents, and different grades of diagenetic and metamorphic alteration: 1. Calcite Marble: massive, calcitic, chiefly metamorphic recrystallized. 2. Zebra Limestone: dolomitic-calcitic, certain content of metasomatic silica, fine bedding as a result of microbial calcite precipitation or of diagenetic to metamorphic separation of carbonate and silica constituents. 3. Massive matrix Dolomite: compact, of diagenetic to metamorphic origin. 4. Dolomite Marble: metamorphic. 5. Hydrothermal Dolomite: hydrothermal alteration of limestone, postdating the tectonic deformation. The recent appearance of ’’Kauffung Limestone” is mainly a result of regional metamorphosis at low temperature up to about 300°C and locally high pressure. The typical textural features are stress induced, mostly protomylonitic calcite recrystallisation and generally slowly or not infected dolomite crystals. The different reactions of the two carbonate phases are attributed to their mineral properties. Rhyolitic and dacitic dykes penetrating the carbonate rocks are interpreted as a result of post- orogenic, probably Carboniferous or Permian volcanism. Microprobe investigation on the carbonates revealed a stochiometric composition of dolomite and calcite. The stable isotope content (8 c 0,8* ^C) reflects increased crystallisation temperature of the carbonate minerals (8 O von -7,75 bis -15,78). A variety of fossil remains have been extracted from bulk samples, consisting of sponge needles, floral components, foramini- fera, and vertebrate remains the latter two of which indicate a depositional age younger than Ordovician. Due to the stratigraphic re-attribution of the Kauffung Limestone, the hypothesis of a Cambrian/Ordovician rifting in the Western Sudetes should be abandoned.

Iluminação em ambientes fabris: otimização e análise técnica-e-económica

Esta Dissertação aborda a temática da eficiência energética em sistemas de iluminação fabris. Desde os primórdios da história da humanidade que a iluminação tem representado um papel importante. Não só garante condições de segurança, como começou por ser o intuito primordial das fogueiras pré-históricas, traduzindo-se num elemento de conforto. Atualmente seria impensável conceber as mais diversas atividades económicas e produtivas de um país sem iluminação. Nesse sentido a iluminação representa também um elemento fomentador de produtividade. Não é bem conhecido o impacto que a iluminação tem nos custos operacionais de uma unidade fabril. Principalmente por ser difícil de quantificar separadamente na fatura de eletricidade qual a percentagem correspondente à iluminação. Tipicamente estes custos podem ascender a 20% do orçamento global da autarquia em países desenvolvidos. Por esse motivo, o sector da iluminação tem investido esforço no sentido de promover melhores soluções de iluminação capazes de por um lado de satisfazer os requisitos do espaço a iluminar, e por outro propiciar soluções eficientes do ponto de vista energético. Estas soluções assentam essencialmente no uso de dispositivos mais eficientes (como por exemplo os LED´s ou as lâmpadas compactas fluorescentes) bem como em estratégias de controlo eficientes baseadas em dados sensoriais (como por exemplo deteção de movimento/presença). A combinação destas estratégias permite reduzir os consumos em cerca de 80% quando comparadas com soluções passivas. A empresa Amorim Cork Research Lda. é uma empresa prestadora de serviços ao universo das empresas da Corticeira Amorim, uma das maiores multinacionais de origem portuguesa. Teve origem no negócio da cortiça, em 1870, sendo hoje líder destacada no sector a nível mundial. Dada a dimensão da empresa e a sua subdivisão em várias Unidades Industriais com requisitos individuais, será expectável que a iluminação represente uma parte significativa da fatura de eletricidade. Atualmente, os vários setores encontram-se equipados com soluções de iluminação diferentes, na sua maioria empregando tecnologias passivas, noutros casos com dispositivos eficientes. Há algum interesse em migrar para soluções mais eficientes, em parte suportadas em DALI (com interface de comunicação PLC ou Zigbee).

Factors influencing temporal changes in chemical composition of biogenic deposits in the middle Tążyna River Valley (Kuyavian Lakeland, central Poland)

The present paper discusses the influence of geochemical properties on biogenic deposits in the Wilkostowo mire near Toruń, central Poland. The analysed core has allowed the documentation of environmental changes between the older part of the Atlantic Period and the present day (probably interrupted at the turn of the Meso- and Neoholocene). In order to reconstruct the main stages in the sedimentation of biogenic deposits, we have used stratigraphic variability of selected litho-geochemical elements (organic matter, calcium carbonate, biogenic and terrigenous silica, macro- and micro-elements: Na, K, Mg, Ca, Fe, Mn, Cu, Zn, Pb, Cr and Ni). The main litho-geochemical component is CaCO 3 ; its content ranges from 4.1 per cent to 92 per cent. The variability of CaCO 3 content reflects mainly changes in hydrolog- ical and geomorphological conditions within the catchment area. The effects of prehistoric anthropogenic activities in the catchment of the River Tążyna, e.g., the use of saline water for economic purposes, are recorded in a change from calcareous gyttja into detritus-calcareous gyttja sedimentation and an increased content of lithophilous elements (Na, K, Mg and Ni) in the sediments. Principal component analysis (PCA) has enabled the distinction the most important factors that affected the chemical composition of sediments at the Wilkostowo site, i.e., mechanical and chemical den- udation processes in the catchment, changes in redox conditions, bioaccumulation of selected elements and human activity. Sediments of the Wilkostowo mire are located in the direct vicinity of an archaeological site, where traces of intensive settlement dating back to the Neolithic have been documented. The settlement phase is recorded both in li- thology and geochemical properties of biogenic deposits which fill the reservoir formed at the bottom of the Parchania Canal Valley.

‘YAMPIL INSPIRATIONS’: A STUDY OF THE DNIESTER CULTURAL CONTACT AREA AT THE FRONTIER OF PONTIC AND BALTIC DRAINAGE BASINS

The article presents the present state of research on the general issue of the dniester region of cultural contacts between communities settling the Baltic and Pontic drainage basins . Some five domains of research shall be brought to discussion in which it is possible to see fresh opportunities for archaeological study, on the basis of ‘Yampil studies’ on dniester-Podolia (forest-steppe) barrow-culture ceremonial centres from the latter half of the 4th millennium and first half of the 3rd millennium BC . This relates to the peoples of the Eneolithic and the Early Bronze age . in terms of topogenesis, embracing the Pontic-Tripolye, Yamnaya and Catacomb cultures, as well as Globular amphora and Corded ware in central prehistoric Europe .

Les carrières de grès calcaire tyrrhénien à Korba et ses environs (Cap Bon, Tunisie): pour une meilleure connaissance et valorisation des atouts patrimoniaux, paysagers et environnementaux

(Introdução): Après une formation en architecture, la participation au Master TPTI a été une occasion précieuse pour acquérir de nouvelles connaissances, théoriques et pratiques, en rapport avec l'histoire, le patrimoine et l’environnement dans son sens le plus large. Ces dimensions ont souvent été d’un grand apport pour bien des oeuvres et interventions architecturales et leur ont permis de convaincre et de s’imposer au temps. Elles occupent également une place devenue de plus en plus importante dans la réflexion sur bien des sujets dont la gestion territoriale et l’exploitation des ressources naturelles. Leur considération favorise des approches intégrées et est même indispensable pour toute oeuvre ou intervention visant la durabilité. Elle est, en tout cas, indispensable pour l’étude d’un thème comme celui des friches liées à l’exploitation des ressources naturelles, que nous tentons d’aborder dans ce mémoire à travers le cas des carrières de grès-calcaire des environs de la ville de Korba, en Tunisie. En effet, par ses enseignements variées et pluridisciplinaires, le Master TPTI, nous a offert une ouverture sur l'histoire et l'anthropologie des techniques ainsi que la conservation, la gestion et la valorisation du patrimoine industriel, historique et culturel. En plus des séminaires et des contacts directs avec des professionnels de différents domaines et pays, une place importante a été accordée aux visites de terrains. A tout cela s'ajoute une mobilité de spécialité, qui dans notre cas, a eu lieu au Département d'Economie à l'Université d'Alicante. Le premier volet de ce mémoire sera consacré au projet personnel qui traite, comme évoqué plus haut, des carrières de Korba et ses environs. Il est le fruit d'un travail au cours duquel nous avons essayé, sur les deux années du Master, de tirer profit des différents enseignements dispensés afin d’enrichir notre réflexion sur le thème.

Aplicación de residuos en la fabricación de morteros industriales

La presente Tesis Doctoral estudia el uso de la fracción fina de los residuos de construcción y demolición (RCD) en la fabricación de morteros de albañilería. El principal uso de los áridos reciclados de RCD es la construcción de rellenos o firmes de carreteras, aunque su uso como áridos para la fabricación de hormigones o morteros le daría un mayor valor añadido. A nivel internacional existen numerosos estudios sobre la utilización de la fracción gruesa de los áridos reciclados de RCD en la fabricación de hormigones. Sin embargo son escasos los trabajos llevados a cabo para valorizar la fracción fina. Actualmente en España la fracción fina de los áridos reciclados de RCD está infrautilizada y en la mayoría de los casos depositada sin uso en los vertederos de las Plantas de reciclaje. En este trabajo se han utilizado dos tipos de áridos reciclados, uno procedente de residuos de hormigón (FRCA) y otro de residuos mixtos de tabiquería con un alto porcentaje de ladrillo rojo cerámico (FMRA). Todos los materiales han sido caracterizados desde un punto de vista físico, químico y mineralógico para justificar el efecto de su incorporación a la fabricación de morteros industriales de albañilería. En una primera fase se estudiaron las propiedades del mortero fresco y endurecido fabricado con FRCA y cinco niveles de sustitución volumétrica de arena natural y FRCA: 0%, 5%, 10%, 20% y 40%.Se utilizó un cemento puzolánico tipo CEM-IV y se evaluaron las propiedades a corto y largo plazo de morteros de baja resistencia (M5) En una segunda fase, se utilizó un cemento tipo CEM-II y se fabricaron morteros de mayor resistencia (M-10) utilizando FRMA. En esta etapa se llevaron a cabo sustituciones de arena natural por arena reciclada de 0%, 25%, 50%, 75% y 100%. El residuo fue evaluado medioambientalmente mediante el test de conformidad antes y después de ser ligado con cemento (lixiviación). Los resultados fueron completados con estudios de durabilidad. Con el objetivo de completar los estudios anteriores, se llevó a cabo una tercera fase, donde se sustituyó hasta un 100% de arena natural por FRCA, utilizando un cemento tipo CEM-II para fabricar un mortero tipo M-10, dosificado de manera similar al empleado en la segunda fase de este trabajo. Como conclusión general de esta tesis, se puede decir que pueden admitirse tasas de sustitución de hasta un 50% de arena natural por árido reciclado en morteros industriales de albañilería para usos de interior sin que sus propiedades puedan verse afectadas significativamente. Los resultados obtenidos contribuyen a reducir la extracción de arena natural de canteras y ríos, minimizar el consumo de energía y emisiones de CO2, mitigar el calentamiento global y evitar el depósito en vertedero de la fracción fina de RCD.

Estudo da substituição de agregados miúdos naturais por pó de pedra em concreto de cimento portland

The sharp consumption of natural resources by the construction industry has motivated numerous studies concerning the application of waste to replace partially or fully, some materials, such as aggregates, thereby reducing the environmental impact caused by the extraction of sand and crushing process. The application of stone dust from crushing process arising as an aggregate for the production of Portland cement concrete is a viable alternative in view of the high cost of natural sands, in addition to the environmental damage which causes its operation to the environment. The stone dust has reduced cost compared to natural sand because it is produced in the beds of their own quarries, which are usually located close to major urban centers. This study examined the feasibility of using stone dust from the crushing of rock gneisses in the state of Bahia, replacing natural quartz sand. In the development of scientific study was conducted to characterize physical and chemical raw materials applied and molded cylindrical specimens , using as reference values Fck 20, Fck 25 and Fck 30 MPa ( resistance characteristic of the concrete after 28 days) in following compositions stone powder: 10%, 30%, 50 %, 100% and 100% with additive. The specimens were cured and subjected to the tests of compressive strength and water absorption, then the samples were subjected to the tests of X-ray diffraction and scanning electron microscopy. The results obtained showed that the composition with 10% stone powder showed the best results regarding the physical and mechanical tests performed, confirming the reduction in compressive strength and increased water uptake increased as the content of the powder stone in the concrete composition

Tecnologia e funcionalidade das peças esquiroladas do Paleolítico Superior de Vale Boi, Vila do Bispo

Dissertação de Mestrado, Arqueologia, Faculdade de Ciências Humanas e Sociais, Universidade do Algarve, 2016

Libs in cultural heritage: recognition and identification of objects in an underwater archaeological shipwreck

Nowadays, one of the most important areas of interest in archeology is the characterization of the submersed cultural heritage. Mediterranean Sea is rich in archaeological findings due to storms, accidents and naval battles since prehistoric times. Chemical analysis of submerged materials is an extremely valuable source of information on the origin and precedence of the wrecks, and also the raw materials employed during the manufacturing of the objects found in these sites. Nevertheless, sometimes it is not possible to extract the archaeological material from the marine environment due to size of the sample, the legislation or preservation purposes. In these cases, the in-situ analysis turns into the only alternative for obtaining information. In spite of this demand, no analytical techniques are available for the in-situ chemical characterization of underwater materials. The versatility of laser-induced breakdown spectroscopy (LIBS) has been successfully tested in oceanography 1. Advantages such as rapid and in situ analysis with no sample preparation make LIBS a suitable alternative for field measurements. To further exploit the inherent advantages of the technology, a mobile fiber-based LIBS platform capable of performing remote measurements up to 50 meters range has been designed for the recognition and identification of artworks in underwater archaeological shipwrecks. The LIBS prototype featured both single-pulse (SP-LIBS) and multi-pulse excitation (MP-LIBS) 2. The use of multi-pulse excitation allowed an increased laser beam energy (up to 95 mJ) transmitted through the optical fiber. This excitation mode results in an improved performance of the equipment in terms of extended range of analysis (to a depth of 50 m) and a broader variety of samples to be analyzed (i.e., rocks, marble, ceramics and concrete). In the present work, the design and construction considerations of the instrument are reported and its performance is discussed on the basis of the spectral response, the remote irradiance achieved upon the range of analysis and its influence on plasma properties, as well as the effect of the laser pulse duration and purge gas to the LIBS signal. Also, to check the reliability and reproducibility of the instrument for field analysis several robustness tests were performed outside the lab. Finally, the capability of this instrument was successfully demonstrated in an underwater archaeological shipwreck (San Pedro de Alcántara, Malaga).

Volcanic processes and human exposure as elements to build a risk model for Volcan de Fuego, Guatemala

The activity of Fuego volcano during the 1999 - 2013 eruptive episode is studied through field, remote sensing and observatory records. Mapping of the deposits allows quantifying the erupted volumes and areas affected by the largest eruptions during this period. A wide range of volcanic processes results in a diversity of products and associated deposits, including minor airfall tephra, rockfall avalanches, lava flows, and pyroclastic flows. The activity can be characterized by long term, low level background activity, and sporadic larger explosive eruptions. Although the background activity erupts lava and ash at a low rate (~ 0.1 m3/s), the persistence of such activity over time results in a significant contribution (~ 30%) to the eruption budget during the studied period. Larger eruptions produced the majority of the volume of products during the studied period, mainly during three large events (May 21, 1999, June 29, 2003, and September 13, 2012), mostly in the form of pyroclastic flows. A total volume of ~ 1.4 x 108 m3 was estimated from the mapped deposits and the estimated background eruption rate. Posterior remobilization of pyroclastic flow material by stream erosion in the highly confined Barranca channels leads to lahar generation, either by normal rainfall, or by extreme rainfall events. A reassessment of the types of products and volumes erupted during the decade of 1970's allows comparing the activity happening since 1999 with the older activity, and suggests that many of the eruptive phenomena at Fuego may have similar mechanisms, despite the differences in scale between. The deposits of large pyroclastic flows erupted during the 1970's are remarkably similar in appearance to the deposit of pyroclastic flows from the 1999 - 2013 period, despite their much larger volume; this is also the case for prehistoric eruptions. Radiocarbon dating of pyroclastic flow deposits suggests that Fuego has produced large eruptions many times during the last ~ 2 ka, including larger eruptions during the last 500 years, which has important hazard implications. A survey was conducted among the local residents living near to the volcano, about their expectations of possible future crises. The results show that people are aware of the risk they could face in case of a large eruption, and therefore they are willing to evacuate in such case. However, their decision to evacuate may also be influenced by the conditions in which the evacuation could take place. If the evacuation represents a potential loss of their livelihood or property they will be more hesitant to leave their villages during a large eruption. The prospect of facing hardship conditions during the evacuation and in the shelters may further cause reluctance to evacuate. A short discussion on some of the issues regarding risk assessment and management through an early warning system is presented in the last chapter.

La datation du site Mailhot-Curran : application de la luminescence optique sur des poteries iroquoiennes du Saint-Laurent

La luminescence optique (OSL) a été mesurée sur dix-sept fragments de poterie collectés à Mailhot-Curran (BgFn-2), un site archéologique du Sylvicole supérieur tardif localisé dans le sud-ouest du Québec. Le but principal de ce projet était de dater ce site qui est considéré jusqu’à maintenant comme le plus récent site préhistorique de la concentration de Saint-Anicet, afin de poser un jalon dans la chronologie des sites de cette région. L’OSL a été utilisée conjointement à la datation par radiocarbone (14C) et la sériation du matériel archéologique. L’hypothèse archéologique propose que le village aurait été occupé pendant les années 1518 à 1530 de notre ère (Chapdelaine 2015a). Les résultats que nous proposons dans ce présent mémoire appuient cette proposition. Nous avons obtenu un âge de 490 ± 49 ans (année de référence : 2013), correspondant à l’année 1523 de notre ère avec une probabilité d’occupation du site Mailhot-Curran entre les années 1474 et 1572. Le programme de datation par luminescence optique a été réalisé sur des fragments de poterie domestique composés d’argile de la Mer de Champlain datant de la période du Quaternaire récent. La datation par stimulation infrarouge (IRSL) a été préférentiellement utilisée sur des aliquotes de grains fins polyminéraliques. Pour la détermination des doses équivalentes, un protocole SAR (Murray et Wintle 2000) modifié pour la mesure des feldspaths et incluant un lessivage optique a été utilisé (Lamothe et al. 2004). Les valeurs g ont été mesurées en suivant le protocole proposé par Auclair et al. (2003). La correction de Huntley et Lamothe (2001) a été utilisée afin de corriger les doses équivalentes mesurées pour la décroissance anormale du signal feldspathique. Les doses annuelles ont pour leur part été déterminées par des mesures réalisées in situ et en laboratoire. Les résultats que nous présentons dans ce mémoire sont affectés par une dispersion assez large. Cette variabilité a été prise en compte par des méthodes statistiques pour la détermination de l’âge probable de l’occupation du site Mailhot-Curran.

La datation du site Mailhot-Curran : application de la luminescence optique sur des poteries iroquoiennes du Saint-Laurent

La luminescence optique (OSL) a été mesurée sur dix-sept fragments de poterie collectés à Mailhot-Curran (BgFn-2), un site archéologique du Sylvicole supérieur tardif localisé dans le sud-ouest du Québec. Le but principal de ce projet était de dater ce site qui est considéré jusqu’à maintenant comme le plus récent site préhistorique de la concentration de Saint-Anicet, afin de poser un jalon dans la chronologie des sites de cette région. L’OSL a été utilisée conjointement à la datation par radiocarbone (14C) et la sériation du matériel archéologique. L’hypothèse archéologique propose que le village aurait été occupé pendant les années 1518 à 1530 de notre ère (Chapdelaine 2015a). Les résultats que nous proposons dans ce présent mémoire appuient cette proposition. Nous avons obtenu un âge de 490 ± 49 ans (année de référence : 2013), correspondant à l’année 1523 de notre ère avec une probabilité d’occupation du site Mailhot-Curran entre les années 1474 et 1572. Le programme de datation par luminescence optique a été réalisé sur des fragments de poterie domestique composés d’argile de la Mer de Champlain datant de la période du Quaternaire récent. La datation par stimulation infrarouge (IRSL) a été préférentiellement utilisée sur des aliquotes de grains fins polyminéraliques. Pour la détermination des doses équivalentes, un protocole SAR (Murray et Wintle 2000) modifié pour la mesure des feldspaths et incluant un lessivage optique a été utilisé (Lamothe et al. 2004). Les valeurs g ont été mesurées en suivant le protocole proposé par Auclair et al. (2003). La correction de Huntley et Lamothe (2001) a été utilisée afin de corriger les doses équivalentes mesurées pour la décroissance anormale du signal feldspathique. Les doses annuelles ont pour leur part été déterminées par des mesures réalisées in situ et en laboratoire. Les résultats que nous présentons dans ce mémoire sont affectés par une dispersion assez large. Cette variabilité a été prise en compte par des méthodes statistiques pour la détermination de l’âge probable de l’occupation du site Mailhot-Curran.

Formulação de betão autocompactável com resíduos de pedreiras do Alentejo: Aproveitamento de resíduos no fabrico do betão

Os betões autocompactáveis (BAC) são betões que se definem pela capacidade de fluir no interior das cofragens, preenchendo-as e envolvendo as armaduras só por acção do seu próprio peso, sem bloqueio dos agregados e mantendo-se homogéneo em todo o seu volume. As adições activas do tipo II nomeadamente as cinzas volantes, utilizadas na fabricação do BAC irão escassear no futuro pelo facto de provirem da queima do carvão da qual resulta uma quantidade elevada de C02. Para minimizar estas emissões, o carvão começa a ser substituído por gás natural. Mas, como o BAC necessita duma grande quantidade de finos, há necessidade de encontrar outros subprodutos que a substituam. Tendo em conta o que atrás se afirma introduziram-se na fabricação do BAC resíduos de pedreira do Alentejo, identificaram-se as suas características no estado fresco e no estado endurecido. Este estudo teve também em conta o factor económico da sua produção. /ABSTRACT: Self-Compacting (SCC) is concrete which may be defined by the ability to flow inside the formwork, filling them and involving the reinforcements only by action of its own weight, without blocking and maintaining uniformity throughout its volume. Type II additions, as fly ash, are used in the manufacture of SCC. The supply of fly ash in the future will be difficult because they come from the burning of coal resulting in a high amount of C02. To minimize these emissions, coal is being replaced by natural gas. But, as the BAC requires a large amount of fine materials, the formulation of SCC requires other fine products. Having this in mind, the use of waste from Alentejo quarries in concrete was tested. The characteristics of SCC with waste material were identified in fresh and hardened state. This study also took into account the economic factor of production.

Integração e recuperação paisagística em pedreiras

Esta dissertação, elaborada no âmbito da obtenção do grau de mestre em Arquitetura Paisagista, tem como tema a “Integração e Recuperação Paisagística em Pedreiras”, a qual foi desenvolvida com base no trabalho de investigação desenvolvido, enquanto colaborador no Centro Tecnológico da Pedra Natural de Portugal (CEVALOR) localizado em Borba, desde o ano 2000, até à atualidade. A recuperação de pedreiras pode ser caracterizada, como um processo de intervenção local, inserido no âmbito da gestão visual, da conservação e de valorização da paisagem. Para realizar o processo de recuperação, não só é necessário o correto enquadramento legal, como entender o contexto paisagístico, que permite avaliar os impactes visuais potenciais e propor medidas de mitigação adequadas. O conteúdo metodológico desta dissertação apresenta a análise, interpretação e caracterização estrutural da paisagem assim como da avaliação do impacte visual, assim como as opções de recuperação com vista à sua integração das pedreiras na paisagem; Abstract: Integration and landscape reclamation in quarries This dissertation concerning the theme “landscape integration and rehabilitation of quarries” aims to obtain the master degree in landscape architecture, as the result of my research as a collaborator at CEVALOR since the year of 2000. The integration and rehabilitation of quarries can be described has a process of local intervention within the fields of visual management, conservation and amelioration of the landscape. In order to accomplish the rehabilitation process, not only is necessary to consider all legal obligations but understand the landscape context, through the analysis of the visual quality and the assessment of the visual impacts in order to propose the most adequate mitigation measures. This dissertation presents a methodological approach that describes the process of landscape analysis, landscape visual impact assessment and the feasible rehabilitation options regarding the visual integration of quarries in the landscape.

Rock paintings and microorganisms: a new insight on Escoural cave

European cave art is of tremendous importance to understand the cultural traditions of the Upper Palaeolithic (35 000 – 10 000 BP) populations. Indeed, Prehistoric communities performed numerous cave paintings all over Western Europe. Understanding these artworks should provide a better knowledge of these early cultural aspects. Although numerous studies have been carried out to analyse the materials used by those communities, nothing has been done on the techniques’ palette of Escoural Cave’s representations. The present work aims at providing the very first data about the techniques and materials used by the Prehistoric to perform the cave paintings of Escoural (Alentejo, Portugal), and the microorganisms possibly endangering this unique parietal art. In situ observations coupled with an extensive micro-sampling and micro-destructive analyses allowed to characterize the coloured material and the way they were applied on the walls of the cave. Both red and black pigments present major composition’s disparities among the different paintings and drawings, supporting a more complex occupations’ chronology than what was earlier thought. The Palaeolithic paintings have suffered deterioration from environmental conditions and include chemical, mechanical and aesthetic alterations, possibly as a result of fungal activity. The standard techniques for biological assessments used in these contexts provided important insights on the diversity of the microbial population, though they have accuracy limitations. To understand the extent and viability of the existing microbiota, DNA quantification and biomarkers analyses, such as desidrogenase activity were performed and correlated with ergosterol amounts; RESUMO: A Arte Rupestre Europeia é de grande importância para compreender as tradições culturais da população do Paleolítico Superior (35 000 - 10 000 BP). De fato, as comunidades Pré-históricas realizaram inúmeras pinturas rupestres em toda a Europa Ocidental, sendo crucial compreender estas obras de forma a proporcionar um melhor conhecimento destes ancestrais aspectos culturais. Embora vários estudos tenham sido realizados para analisar os materiais utilizados por estas comunidades, nada foi efetuado sobre a técnica de execução das representações presentes na Gruta do Escoural. O presente trabalho visa fornecer os primeiros dados sobre as técnicas e materiais utilizados na Pré-História para executar as pinturas rupestres de Escoural (Alentejo, Portugal) bem como caracterização dos microorganismos possivelmente associados aos danos deste bem único. Observações in situ, juntamente com uma extensa micro-amostragem e análises micro-destrutivas permitiu caracterizar os pigmentos utilizados e a forma como eles foram aplicados nas paredes da caverna. Tanto os pigmentos vermelhos como os pretos apresentam composição distinta nas diversas pinturas e desenhos aí representados, apoiando a presença de diferentes ocupações contrariamente ao que se pensava até então. As pinturas Paleolíticas têm sofrido deterioração, devido às condições ambientais, nomeadamente alterações químicas, mecânicas e, possivelmente como resultado da atividade fúngica. As técnicas usualmente utilizadas para a avaliação de contaminação biológica fornecem informação importante sobre a diversidade da população microbiana, embora apresentem algumas limitações. Para entender a extensão e a viabilidade da microbiota existente, a quantificação de DNA e análise de biomarcadores como actividade de desidrogenases foram realizadas e correlacionadas com o conteúdo em ergosterol.