System identification of linear vibrating structures

Methods of dynamic modelling and analysis of structures, for example the finite element method, are well developed. However, it is generally agreed that accurate modelling of complex structures is difficult and for critical applications it is necessary to validate or update the theoretical models using data measured from actual structures. The techniques of identifying the parameters of linear dynamic models using Vibration test data have attracted considerable interest recently. However, no method has received a general acceptance due to a number of difficulties. These difficulties are mainly due to (i) Incomplete number of Vibration modes that can be excited and measured, (ii) Incomplete number of coordinates that can be measured, (iii) Inaccuracy in the experimental data (iv) Inaccuracy in the model structure. This thesis reports on a new approach to update the parameters of a finite element model as well as a lumped parameter model with a diagonal mass matrix. The structure and its theoretical model are equally perturbed by adding mass or stiffness and the incomplete number of eigen-data is measured. The parameters are then identified by an iterative updating of the initial estimates, by sensitivity analysis, using eigenvalues or both eigenvalues and eigenvectors of the structure before and after perturbation. It is shown that with a suitable choice of the perturbing coordinates exact parameters can be identified if the data and the model structure are exact. The theoretical basis of the technique is presented. To cope with measurement errors and possible inaccuracies in the model structure, a well known Bayesian approach is used to minimize the least squares difference between the updated and the initial parameters. The eigen-data of the structure with added mass or stiffness is also determined using the frequency response data of the unmodified structure by a structural modification technique. Thus, mass or stiffness do not have to be added physically. The mass-stiffness addition technique is demonstrated by simulation examples and Laboratory experiments on beams and an H-frame.

Population pharmacokinetics of single-dose intravenous paracetamol in children

Background To determine the pharmacokinetics (PK) of a new i.v. formulation of paracetamol (Perfalgan) in children ≤15 yr of age. Methods After obtaining written informed consent, children under 16 yr of age were recruited to this study. Blood samples were obtained at 0, 15, 30 min, 1, 2, 4, 6, and 8 h after administration of a weight-dependent dose of i.v. paracetamol. Paracetamol concentration was measured using a validated high-performance liquid chromatographic assay with ultraviolet detection method, with a lower limit of quantification (LLOQ) of 900 pg on column and an intra-day coefficient of variation of 14.3% at the LLOQ. Population PK analysis was performed by non-linear mixed-effect modelling using NONMEM. Results One hundred and fifty-nine blood samples from 33 children aged 1.8–15 yr, weight 13.7–56 kg, were analysed. Data were best described by a two-compartment model. Only body weight as a covariate significantly improved the goodness of fit of the model. The final population models for paracetamol clearance (CL), V1 (central volume of distribution), Q (inter-compartmental clearance), and V2 (peripheral volume of distribution) were: 16.51×(WT/70)0.75, 28.4×(WT/70), 11.32×(WT/70)0.75, and 13.26×(WT/70), respectively (CL, Q in litres per hour, WT in kilograms, and V1 and V2 in litres). Conclusions In children aged 1.8–15 yr, the PK parameters for i.v. paracetamol were not influenced directly by age but were by total body weight and, using allometric size scaling, significantly affected the clearances (CL, Q) and volumes of distribution (V1, V2).

Probabilistic multiple model neural network based leak detection system:experimental study

This paper presents an effective decision making system for leak detection based on multiple generalized linear models and clustering techniques. The training data for the proposed decision system is obtained by setting up an experimental pipeline fully operational distribution system. The system is also equipped with data logging for three variables; namely, inlet pressure, outlet pressure, and outlet flow. The experimental setup is designed such that multi-operational conditions of the distribution system, including multi pressure and multi flow can be obtained. We then statistically tested and showed that pressure and flow variables can be used as signature of leak under the designed multi-operational conditions. It is then shown that the detection of leakages based on the training and testing of the proposed multi model decision system with pre data clustering, under multi operational conditions produces better recognition rates in comparison to the training based on the single model approach. This decision system is then equipped with the estimation of confidence limits and a method is proposed for using these confidence limits for obtaining more robust leakage recognition results.

The enantioselective population pharmacokinetics of intravenous ketorolac in children using a stereoselective assay suitable for microanalysis

Objective: To describe the effect of age and body size on enantiomer selective pharmacokinetic (PK) of intravenous ketorolac in children using a microanalytical assay. Methods: Blood samples were obtained at 0, 15 and 30 min and at 1, 2, 4, 6, 8 and 12 h after a weight-dependent dose of ketorolac. Enantiomer concentration was measured using a liquid chromatography tandem mass spectrometry method. Non-linear mixed-effect modelling was used to assess PK parameters. Key findings: Data from 11 children (1.7–15.6 years, weight 10.7–67.4 kg) were best described by a two-compartment model for R(+), S(−) and racemic ketorolac. Only weight (WT) significantly improved the goodness of fit. The final population models were CL = 1.5 × (WT/46)0.75, V1 = 8.2 × (WT/46), Q = 3.4 × (WT/46)0.75, V2 = 7.9 × (WT/46), CL = 2.98 × (WT/46), V1 = 13.2 × (WT/46), Q = 2.8 × (WT/46)0.75, V2 = 51.5 × (WT/46), and CL = 1.1 × (WT/46)0.75, V1 = 4.9 × (WT/46), Q = 1.7 × (WT/46)0.75 and V2 = 6.3 × (WT/46)for R(+), S(−) and racemic ketorolac. Conclusions: Only body weight influenced the PK parameters for R(+) and S(−) ketorolac. Using allometric size scaling significantly affected the clearances (CL, Q) and volumes of distribution (V1, V2).

Detecting Precipitation Climate Changes: An Approach Based on a Stochastic Daily Precipitation Model

2002 Mathematics Subject Classification: 62M10.

About the Oral Health of Bulgarian Population over 20 Years Old

2000 Mathematics Subject Classification: 62P10, 62J12.

On the Lp-Norm Regression Models for Estimating Value-at-Risk

Analysis of risk measures associated with price series data movements and its predictions are of strategic importance in the financial markets as well as to policy makers in particular for short- and longterm planning for setting up economic growth targets. For example, oilprice risk-management focuses primarily on when and how an organization can best prevent the costly exposure to price risk. Value-at-Risk (VaR) is the commonly practised instrument to measure risk and is evaluated by analysing the negative/positive tail of the probability distributions of the returns (profit or loss). In modelling applications, least-squares estimation (LSE)-based linear regression models are often employed for modeling and analyzing correlated data. These linear models are optimal and perform relatively well under conditions such as errors following normal or approximately normal distributions, being free of large size outliers and satisfying the Gauss-Markov assumptions. However, often in practical situations, the LSE-based linear regression models fail to provide optimal results, for instance, in non-Gaussian situations especially when the errors follow distributions with fat tails and error terms possess a finite variance. This is the situation in case of risk analysis which involves analyzing tail distributions. Thus, applications of the LSE-based regression models may be questioned for appropriateness and may have limited applicability. We have carried out the risk analysis of Iranian crude oil price data based on the Lp-norm regression models and have noted that the LSE-based models do not always perform the best. We discuss results from the L1, L2 and L∞-norm based linear regression models. ACM Computing Classification System (1998): B.1.2, F.1.3, F.2.3, G.3, J.2.

Általános egyensúlyi modellek alkalmazása gazdaságpolitikai elemzésekre (Application of general equilibrium models to economic policy analyses)

A szerző az alkalmazott többszektoros modellezés területén a lineáris programozási modellektől a számszerűsített általános egyensúlyi modellekig végbement változásokat tekinti át. Egy rövid történeti visszapillantás után a lineáris programozás módszereire épülő nemzetgazdasági szintű modellekkel összevetve mutatja be az általános egyensúlyi modellek közös, illetve eltérő jellemzőit. Egyidejűleg azt is érzékelteti, hogyan lehet az általános egyensúlyi modelleket a gazdaságpolitikai célok konzisztenciájának, a célok közötti átváltási lehetőségek elemzésére és általában a gazdaságpolitikai elképzelések érzékenységi vizsgálatára felhasználni. A szerző az elméleti-módszertani kérdések taglalását számszerűsített általános egyensúlyi modell segítségével illusztrálja. _______ The author surveys the changes having taken place in the field of multi-sector modeling, from the linear programming models to the quantified general equilibrium models. After a brief historical retrospection he presents the common and different characteristic features of the general equilibrium models by comparing them with the national economic level models based on the methods of linear programming. He also makes clear how the general equilibrium models can be used for analysing the consistency of economic policy targets, for the investigation of trade-off possibilities among the targets and, in general, for sensitivity analyses of economic policy targets. The discussion of theoretical and methodological quuestions is illustrated by the author with the aid of a quantified general equilibrium model.

Adaptability of nonlinear equilibrum models to central planning

Linear multisectoral models have for long been applied in the Hungarian national economic planning. Price-quantity correspondences and interaction, however, cannot easily be taken into account in the traditional linear framework. Computable general equilibrium modelers in the West have developed techniques which use extensively price-quantity interdependences. However, since they are usually presented with the controversial strict neoclassical interpretation, the possibility of their adaptation to socialist planning models has been concaled. This paper reflects on some results of a research investigating the possible adaptation of eqailibrium modeling techniques to central planning models.

Influence of gender and life stressors on longitudinal depression treatment outcomes among older primary care patients

Purpose: Depression in older females is a significant and growing problem. Females who experience life stressors across the life span are at higher risk for developing problems with depression than their male counterparts. The primary aim of this study was (a) to examine gender-specific differences in the correlates of depression in older primary care patients based on baseline and longitudinal analyses; and (b) to examine the longitudinal effect of biopsychosocial risk factors on depression treatment outcomes in different models of behavioral healthcare (i.e., integrated care and enhanced referral). Method: This study used a quantitative secondary data analysis with longitudinal data from the Primary Care Research in Substance Abuse and Mental Health for Elderly (PRISM-E) study. A linear mixed model approach to hierarchical linear modeling was used for analysis using baseline assessment, and follow-up from three-month and six-month. Results: For participants diagnosed with major depressive disorder female gender was associated with increased depression severity at six-month compared to males at six-month. Further, the interaction between gender and life stressors found that females who reported loss of family and friends, family issues, money issues, medical illness was related to higher depression severity compared to males whereas lack of activities was related to lower depression severity among females compared to males. Conclusion: These findings suggest that gender moderated the relationship between specific life stressors and depression severity similar to how a protective factor can impact a person's response to a problem and reduce the negative impact of a risk factor on a problem outcome. Therefore, life stressors may be a reliable predictor of depression for both females and males in either behavioral health treatment model. This study concluded that life stressors influence males basic comfort, stability, and survival whereas life stressors influence females' development, personal growth, and happiness; therefore, life stressors may be a useful component to include in gender-based screening and assessment tools for depression. ^

Time trends and predictors of initiation for cigarette and waterpipe smoking among Jordanian school children: Irbid, 2008-2011

Smoking prevalence among adolescents in the Middle East remains high while rates of smoking have been declining among adolescents elsewhere. The aims of this research were to (1) describe patterns of cigarette and waterpipe (WP) smoking, (2) identify determinants of WP smoking initiation, and (3) identify determinants of cigarette smoking initiation in a cohort of Jordanian school children. ^ Among this cohort of school children in Irbid, Jordan, (age ≈ 12.6 at baseline) the first aim (N=1,781) described time trends in smoking behavior, age at initiation, and changes in frequency of smoking from 2008–2011 (grades 7–10). The second aim (N=1,243) identified determinants of WP initiation among WP-naïve students; and the third aim (N=1,454) identified determinants of cigarette smoking initiation among cigarette naïve participants. Determinants of initiation were assessed with generalized mixed models. All analyses were stratified by gender. ^ Baseline prevalence of current smoking (cigarettes or WP) for boys and girls was 22.9% and 8.7% respectively. Prevalence of ever- and current- any smoking, cigarette smoking, WP smoking, and dual cigarette/WP smoking was higher in boys than girls each year (p<0.001). At all time points, prevalence of WP smoking was higher than that of cigarette smoking (p<0.001) for both boys and girls. WP initiation was documented in 39% of boys and 28% of girls. Cigarette initiation was documented in 37% of boys and 24% of girls. Determinants of WP initiation included ever-cigarette smoking, low WP refusal self-efficacy, intention to smoke, and having teachers and friends who smoke WP. Determinants of cigarette smoking initiation included ever-WP smoking, low cigarette refusal self-efficacy, intention to start smoking cigarettes, and having friends and family who smoke.^ These studies reveal intensive smoking patterns at early ages among Jordanian youth in Irbid, characterized by a predominance of WP smoking. WP may be a vehicle for tobacco dependence and subsequent cigarette uptake. The sizeable incidence of WP and cigarette initiation among students of both sexes points to a need for culturally relevant smoking prevention interventions. Gender-specific factors, refusal skills, and smoking cessation of both WP and cigarettes for youth and their parents/teachers would be important components of such initiatives. ^

Dynamic fault tree analysis with PEWMA modeling of event rates and Bayesian updating of material balance parameters using MCMC

This research explores Bayesian updating as a tool for estimating parameters probabilistically by dynamic analysis of data sequences. Two distinct Bayesian updating methodologies are assessed. The first approach focuses on Bayesian updating of failure rates for primary events in fault trees. A Poisson Exponentially Moving Average (PEWMA) model is implemnented to carry out Bayesian updating of failure rates for individual primary events in the fault tree. To provide a basis for testing of the PEWMA model, a fault tree is developed based on the Texas City Refinery incident which occurred in 2005. A qualitative fault tree analysis is then carried out to obtain a logical expression for the top event. A dynamic Fault Tree analysis is carried out by evaluating the top event probability at each Bayesian updating step by Monte Carlo sampling from posterior failure rate distributions. It is demonstrated that PEWMA modeling is advantageous over conventional conjugate Poisson-Gamma updating techniques when failure data is collected over long time spans. The second approach focuses on Bayesian updating of parameters in non-linear forward models. Specifically, the technique is applied to the hydrocarbon material balance equation. In order to test the accuracy of the implemented Bayesian updating models, a synthetic data set is developed using the Eclipse reservoir simulator. Both structured grid and MCMC sampling based solution techniques are implemented and are shown to model the synthetic data set with good accuracy. Furthermore, a graphical analysis shows that the implemented MCMC model displays good convergence properties. A case study demonstrates that Likelihood variance affects the rate at which the posterior assimilates information from the measured data sequence. Error in the measured data significantly affects the accuracy of the posterior parameter distributions. Increasing the likelihood variance mitigates random measurement errors, but casuses the overall variance of the posterior to increase. Bayesian updating is shown to be advantageous over deterministic regression techniques as it allows for incorporation of prior belief and full modeling uncertainty over the parameter ranges. As such, the Bayesian approach to estimation of parameters in the material balance equation shows utility for incorporation into reservoir engineering workflows.

Effects of introduced moose (Alces alces) on vegetation composition, nutrient dynamics, and decomposition rates in boreal forest ecosystems in Newfoundland, Canada

Globally, consumers affect ecosystem processes including nutrient dynamics. Herbivores have been known to slow nutrient flow in boreal forest ecosystems. I examined the effects of introduced moose on disturbed forests of Newfoundland, Canada by conducting a field experiment during August - November 2014 in 20 paired moose exclosure-control plots. I tested whether moose browsing directly and indirectly affected forests by measuring plant species composition, litter quality and quantity, soil quality, and decomposition rates in areas moose exclosure-control plots. I analyzed moose effects using linear mixed effects models and found evidence indicating that moose reduce plant height and litter biomass affecting the availability of carbon, nitrogen, and phosphorus. However, plant diversity, soil quality, and litter decomposition did not differ between moose exclosures and controls. Moose in Newfoundland directly influence plant regeneration and litter biomass while indirect effects on soil ecosystems may be limited by time, disturbance, and climate.

Polysemy advantage with abstract but not concrete words

Peer reviewed

Polysemy advantage with abstract but not concrete words

Peer reviewed