Development of germanium/silicon integration for near infrared detection

Silicon (Si) is the base material for electronic technologies and is emerging as a very attractive platform for photonic integrated circuits (PICs). PICs allow optical systems to be made more compact with higher performance than discrete optical components. Applications for PICs are in the area of fibre-optic communication, biomedical devices, photovoltaics and imaging. Germanium (Ge), due to its suitable bandgap for telecommunications and its compatibility with Si technology is preferred over III-V compounds as an integrated on-chip detector at near infrared wavelengths. There are two main approaches for Ge/Si integration: through epitaxial growth and through direct wafer bonding. The lattice mismatch of ~4.2% between Ge and Si is the main problem of the former technique which leads to a high density of dislocations while the bond strength and conductivity of the interface are the main challenges of the latter. Both result in trap states which are expected to play a critical role. Understanding the physics of the interface is a key contribution of this thesis. This thesis investigates Ge/Si diodes using these two methods. The effects of interface traps on the static and dynamic performance of Ge/Si avalanche photodetectors have been modelled for the first time. The thesis outlines the original process development and characterization of mesa diodes which were fabricated by transferring a ~700 nm thick layer of p-type Ge onto n-type Si using direct wafer bonding and layer exfoliation. The effects of low temperature annealing on the device performance and on the conductivity of the interface have been investigated. It is shown that the diode ideality factor and the series resistance of the device are reduced after annealing. The carrier transport mechanism is shown to be dominated by generation–recombination before annealing and by direct tunnelling in forward bias and band-to-band tunnelling in reverse bias after annealing. The thesis presents a novel technique to realise photodetectors where one of the substrates is thinned by chemical mechanical polishing (CMP) after bonding the Si-Ge wafers. Based on this technique, Ge/Si detectors with remarkably high responsivities, in excess of 3.5 A/W at 1.55 μm at −2 V, under surface normal illumination have been measured. By performing electrical and optical measurements at various temperatures, the carrier transport through the hetero-interface is analysed by monitoring the Ge band bending from which a detailed band structure of the Ge/Si interface is proposed for the first time. The above unity responsivity of the detectors was explained by light induced potential barrier lowering at the interface. To our knowledge this is the first report of light-gated responsivity for vertically illuminated Ge/Si photodiodes. The wafer bonding approach followed by layer exfoliation or by CMP is a low temperature wafer scale process. In principle, the technique could be extended to other materials such as Ge on GaAs, or Ge on SOI. The unique results reported here are compatible with surface normal illumination and are capable of being integrated with CMOS electronics and readout units in the form of 2D arrays of detectors. One potential future application is a low-cost Si process-compatible near infrared camera.

Synthesis of iminophosphine and phosphinoiminol cyclometallated Pt (II) and Pt (IV) chloro complexes and studies into their biological and photophysical properties

This thesis focuses on the synthesis and analysis of novel chloride based platinum complexes derived from iminophosphine and phosphinoamide ligands, along with studies on their reactivity towards substitution and oxidation reactions. Also explored here are the potential applications of these complexes for biological and luminescent purposes. Chapter one provides an extensive overview of platinum coordination chemistry with examples of various mixed donor ligands along with the history of platinum anticancer therapy. It also looks at metals in medicine, both for biological functions as well as for therapeutic purposes and gives a background to some other applications for platinum complexes. Chapter two outlines the design and synthetic strategies employed for the development of novel platinum (II) chloride complexes from iminophosphine and phosphinoamide ligands. Also reported is the cyclometallation of these complexes to form stable tridentate mixed donor platinum (II) compounds. In Chapter three the development of a direct method for displacing a chloride from a platinum metal centre with a desired phosphine is reported. Numerous methods for successful oxidation of the platinum (II) complexes will also be explored, leading to novel platinum (IV) complexes being reported here also. The importance of stabilisation of the displaced anion, chloride, by the solvent system will also be discussed in this chapter. Chapter four investigates the reactivity of the platinum (II) complexes towards two different biomolecules to form novel platinum bio-adducts. The potential application of the platinum (II) cyclometallates as chemotherapeutics will also be explored here using in-vitro cancer cell testing. Finally, luminescence studies are also reported here for the ligands and platinum complexes reported in chapter two and three to investigate potential applications in this field also. Chapter five provides a final conclusion and an overall summary of the entire project as well as identifying key areas for future work.

Rapid separation of biologically important low molecular weight compounds by microchip electrophoresis and ultra-fast performance liquid chromatography

The research work in this thesis reports rapid separation of biologically important low molecular weight compounds by microchip electrophoresis and ultrahigh liquid chromatography. Chapter 1 introduces the theory and principles behind capillary electrophoresis separation. An overview of the history, different modes and detection techniques coupled to CE is provided. The advantages of microchip electrophoresis are highlighted. Some aspects of metal complex analysis by capillary electrophoresis are described. Finally, the theory and different modes of the liquid chromatography technology are presented. Chapter 2 outlines the development of a method for the capillary electrophoresis of (R, S) Naproxen. Variable parameters of the separation were optimized (i.e. buffer concentration and pH, concentration of chiral selector additives, applied voltage and injection condition).The method was validated in terms of linearity, precision, and LOD. The optimized method was then transferred to a microchip electrophoresis system. Two different types of injection i.e. gated and pinched, were investigated. This microchip method represents the fastest reported chiral separation of Naproxen to date. Chapter 3 reports ultra-fast separation of aromatic amino acid by capillary electrophoresis using the short-end technique. Variable parameters of the separation were optimized and validated. The optimized method was then transferred to a microchip electrophoresis system where the separation time was further reduced. Chapter 4 outlines the use of microchip electrophoresis as an efficient tool for analysis of aluminium complexes. A 2.5 cm channel with linear imaging UV detection was used to separate and detect aluminium-dopamine complex and free dopamine. For the first time, a baseline, separation of aluminium dopamine was achieved on a 15 seconds timescale. Chapter 5 investigates a rapid, ultra-sensitive and highly efficient method for quantification of histamine in human psoriatic plaques using microdialysis and ultrahigh performance liquid chromatography with fluorescence detection. The method utilized a sub-two-micron packed C18 stationary phase. A fluorescent reagent, 4-(1-pyrene) butyric acid N-hydroxysuccinimide ester was conjugated to the primary and secondary amino moieties of histamine. The dipyrene-labeled histamine in human urine was also investigated by ultrahigh pressure liquid chromatography using a C18 column with 1.8 μm particle diameter. These methods represent one of the fastest reported separations to date of histamine using fluorescence detection.

Fabrication and characterisation of semiconductor nanowires and metal interconnects

One-dimensional semiconductor nanowires are considered to be promising materials for future nanoelectronic applications. However, before these nanowires can be integrated into such applications, a thorough understanding of their growth behaviour is necessary. In particular, methods that allow the control over nanowire growth are deemed especially important as it is these methods that will enable the control of nanowire dimensions such as length and diameter (high aspect ratios). The production of nanowires with high-aspect ratios is vital in order to take advantage of the unique properties experienced at the nanoscale, thus allowing us to maximise their use in devices. Additionally, the development of low-resistivity interconnects is desirable in order to connect such nanowires in multi-nanowire components. Consequently, this thesis aims to discuss the synthesis and characterisation of germanium (Ge) nanowires and platinum (Pt) interconnects. Particular emphasis is placed on manipulating the nanowire growth kinetics to produce high aspect ratio structures. The discussion of Pt interconnects focuses on the development of low-resistivity devices and the electrical and structural analysis of those devices. Chapter 1 reviews the most critical aspects of Ge nanowire growth which must be understood before they can be integrated into future nanodevices. These features include the synthetic methods employed to grow Ge nanowires, the kinetic and thermodynamic aspects of their growth and nanowire morphology control. Chapter 2 outlines the experimental methods used to synthesise and characterise Ge nanowires as well as the methods used to fabricate and analyse Pt interconnects. Chapter 3 discusses the control of Ge nanowire growth kinetics via the manipulation of the supersaturation of Ge in the Au/Ge binary alloy system. This is accomplished through the use of bi-layer films, which pre-form Au/Ge alloy catalysts before the introduction of the Ge precursor. The growth from these catalysts is then compared with Ge nanowire growth from standard elemental Au seeds. Nanowires grown from pre-formed Au/Ge alloy seeds demonstrate longer lengths and higher growth rates than those grown from standard Au seeds. In-situ TEM heating on the Au/Ge bi-layer films is used to support the growth characteristics observed. Chapter 4 extends the work of chapter 3 by utilising Au/Ag/Ge tri-layer films to enhance the growth rates and lengths of Ge nanowires. These nanowires are grown from Au/Ag/Ge ternary alloy catalysts. Once again, the supersaturation is influenced, only this time it is through the simultaneous manipulation of both the solute concentration and equilibrium concentration of Ge in the Au/Ag/Ge ternary alloy system. The introduction of Ag to the Au/Ge binary alloy lowers the equilibrium concentration, thus increasing the nanowire growth rate and length. Nanowires with uniform diameters were obtained via synthesis from AuxAg1-x alloy nanoparticles. Manifestation of the Gibbs-Thomson effect, resulting from the dependence of the mean nanowire length as a function of diameter, was observed for all of the nanowires grown from the AuxAg1-x nanoparticles. Finally, in-situ TEM heating was used to support the nanowire growth characteristics. Chapter 5 details the fabrication and characterisation of Pt interconnects deposited by electron beam induced deposition of two different precursors. The fabrication is conducted inside a dual beam FIB. The electrical and structural characteristics of interconnects deposited from a standard organometallic precursor and a novel carbon-free precursor are compared. The electrical performance of the carbon-free interconnects is shown to be superior to that of the organometallic devices and this is correlated to the structural composition of both interconnects via in-situ TEM heating and HAADF-STEM analysis. Annealing of the interconnects is carried out under two different atmospheres in order to reduce the electrical resistivity even further. Finally, chapter 6 presents some important conclusions and summarises each of the previous chapters.

Comparative genomics of Bifidobacteria

Chapter 2 of this thesis describes the sequence analysis of 14 bifidobacterial genomes from various species of the genus Bifidobacterium, and the determination of their open pan-genome trend. This analysis first determined the total number of genes to be considered as the reservoir of functions available to representatives of this genus. Many identified genes are still uncharacterized, but may be involved in the adaptation to the gut environment. This comparative genomic analysis also determined a pool of ortholog functions used to infer their phylogenetic relationship, thereby providing a more robust approach compared to that based solely on the16S rRNA-encoding gene. The genome sequence of an isolate from the insect hindgut Bifidobacterium asteroides PRL2011 was fully characterized in Chapter 3, surprisingly revealing a putative respiratory metabolism, which was also found to be present in other insect isolates, suggesting that respiration was an ancient feature of this genus, but also an adaptative trait to different atmosferic oxygen levels. Chapter 4 of this thesis outlines a comparative study which focused on the analysis of representatives of the Bifidobacterium breve species, revealing that the genetic variability among members of this species principally consists of genes with a role in adaptation to host environment and gut colonization. Finally, Chapter 5 describes the analysis of the genome sequence of Bifidobacterium animalis subsp. lactis BLC1, a probiotic bacterium widely used in food industries as an ingredient of functional foods, providing information that will allow future investigations of this species.

Synthesis of 4-substituted-3(2H)-furanones with novel luminescence properties

The objective of this project was to prepare a range of 4-substituted 3-(2H)-furanones, and to investigate the relationship between their molecular structures and photoluminescence properties. The effects of substituents and conjugated linker unit were also investigated. After generation of the key 3(2H)-furanone heterocycle, extension of the conjugated framework at the C-4 position was achieved through Pd(0)-catalysed coupling reactions. Chapter one of the thesis comprises a review of the relavent literature and is split into three sections. These include information about the prevalence of 3-(2H)-furanones as natural products and synthetic routes to 3-(2H)-furanones in general. The synthetic routes are divided according to the synthetic precursor employed. The final section of chapter one outlines the fundamental principles and application of photoluminescence to organic compounds in general. Chapter two contains the results of the research achieved in the course of this work and a discussion of the findings. Two routes were successfully employed to generate 4-unsubstituted 3-(2H)-furanone moieties: (i) base induced cyclisation of hydroxyenones and (ii) isoxazole chemistry. A number of methods which proved ineffective in the production of furanones with the desired substitution pattern are also detailed. The majority of this study was focused on the introduction of substituents at the C-4 position of the 3-(2H)-furanone ring. This was achieved through the use of Sonogashira and Suzuki cross coupling protocols for Pd(0) catalysed C-C bond formation. The further functionalisation of some compounds was performed using transfer hydrogenation and “click chemistry” methodologies. Finally, the photophysical properties of 3-(2H)-furanones prepared in this project are discussed and the effect of substitution patterns in a complementary “push push” and “push pull” manner have also been investigated. All the experimental data and details of the synthetic methods employed, for the compounds prepared during the course of this research is contained in chapter three together with the spectroscopic and analytical properties of the compounds prepared.

Synthesis and evaluation of novel quinolines and quinazolinediones as potential anti-cancer agents

This thesis outlines the design and effectuation of novel chemical routes towards a nascent class of functionalised quinoline-5,8-diones and the expansion of a series of contemporary quinazolinediones towards an innovative family of pyridinoquinazolinetetrone derivatives. This fragment based approach is envisaged to lead to advancements in the three scaffolds, expanding the SAR pool of both quinolines and quinazolinediones with subsequent evaluation of chemotherapeutic potential as well as furnishing a new class of tricycle for biological investigation. Development of novel quinoline-5,8-diones is provided for by expanding on existing methodology. Using a variety of nucleophiles on a critical intermediate, a broad range of novel compounds was afforded allowing chemotherapeutic potential to be assessed, while also serving as intermediates for accomplishing novel pyridinoquinazolinetetrone congeners. In order to incorporate functionality into our quinazolinedione template, an efficient synthetic strategy was constructed which provided a robust route to effectuate a highly derivatised pyrimidinedione ring. As derivatisation of this template is unreported our chief priority was to synthesise a range of diverse quinazolinediones. The application of annulation methodology using functionalised precursors provided a library of N-3 derivatised quinazolinedione analogues. These, along with their N-1 functionalised derivatives provide a wide scope from which to construct a series of pyridinoquinazolinetetrone derivatives while also serving as a unique class of molecules whose biological potential is uncharted. Although the actualisation of the pyridinoquinazolinetetrone was ultimately unsuccessful, our work has led to the development of novel quinoline-5,8-diones which were found to possess excellent anti-cancer activity when assessed by the NCI screen. Of the quinazolinediones synthesised eight compounds were accepted for screening by the NCI. Results from the single-dose tests however indicated that these compounds possessed little cytotoxic activity at 10 μM. The development of this novel template in conjunction with the highly active quinolinediones serves as an excellent rostrum for future synthetic endeavours.

Novel insights into the expression and function of p38δ MAPK in oesophageal squamous cell carcinoma

Oesophageal cancer is an aggressive malignancy which is resistant to conventional therapy and has a poor prognosis. A greater understanding of the underlying molecular biology of oesophageal cancer and the identification of novel targets is necessary for the future treatment of this disease. This thesis focuses specifically on the ill-defined and understudied p38δ mitogen-activated protein kinase (MAPK) and its function(s) in oesophageal squamous cell carcinoma (OESCC). In contrast to the three other p38 isoforms (p38α, -β and –γ which have to-date been relatively well-studied), p38δ MAPK signalling is poorly understood. Thus, this research elucidates some of the role(s) played by p38δ MAPK in cancer progression. This work outlines how loss of p38δ MAPK expression confers greater tumourigenicity in oesophageal cancer. Restoration of p38δ MAPK expression, however, has anti-proliferative and anti-migratory effects and decreases OESCC capacity for anchorageindependent growth. Using a novel application of an enzyme-substrate fusion approach, the effect of phosphorylated p38δ (p-p38δ) MAPK expression is also considered. The work goes onto describe the effect(s) of p38δ MAPK status on the chemosensitivity of OESCC to conventional cisplatin and 5-fluorouracil (CF) versus the effectiveness of doxorubicin, cisplatin and 5-fluorouracil (ACF). ACF treatment of p38δ MAPK-negative OESCC results in decreased proliferation, migration and recovery, and increased apoptosis when compared with CF treatment. This thesis examines the potential mechanisms by which p38δ MAPK expression is lost in OESCC and identifies epigenetic regulation as the probable cause of differential p38δ MAPK expression. Also analysed is the role p38δ MAPK and p-p38δ MAPK play in the cell cycle. In summary, this research identifies p38δ MAPK as a possible molecular target and a potential predictor of response to chemotherapy in OESCC patients.

Biased group decision-making and the effect of computer-mediated communication: separating the effects of anonymity, voting and blind picking

The influence of communication technology on group decision-making has been examined in many studies. But the findings are inconsistent. Some studies showed a positive effect on decision quality, other studies have shown that communication technology makes the decision even worse. One possible explanation for these different findings could be the use of different Group Decision Support Systems (GDSS) in these studies, with some GDSS better fitting to the given task than others and with different sets of functions. This paper outlines an approach with an information system solely designed to examine the effect of (1) anonymity, (2) voting and (3) blind picking on decision quality, discussion quality and perceived quality of information.

Manifestations of heavenly light and fire and the construction of a saint: sanctity, mission and salvation in Adomnán's Vita Columbae

This thesis examines the late seventh-century Latin Life of Columba (Vita Columbae) in a context sympathetic to the spiritual aims and formative intellectual background of its author, Adomnán of Iona. It argues that the Vita Columbae is a sophisticated work, shaped by Adomnán’s spiritual and theological concerns. This sophistication is revealed by a forensic examination of Adomnán’s representation of Columba’s sanctity through a series of miracles, in particular, miracle stories depicting divine manifestations of fire and light. This thesis considers the form and function of these miracle stories in the context of biblical, patristic and medieval interpretations of their archetypes, towards revealing the underlying influence of scriptural, hagiographical and monastic models of sanctity. Chapter one evaluates the function of the Vita Columbae, and outlines the core themes of sanctity which pervade the work, by considering the technical terminology and literary devices found in the opening prefaces in the context of the wider monastic tradition. Chapter two examines Adomnán’s use of biblical models of sanctity to establish Columba’s sanctity, and their relationship between these models and certain miraculous episodes in the Vita Columbae. Chapter three investigates Adomnán’s description of the Holy Spirit as an illuminating fire, and its significance for his portrayal of the saint, by means of a forensic examination of biblical, exegetical and hagiographical treatments of the image. Chapter four examines the missiological, soteriological and providential elements contributing to Adomnán’s portrayal of Columba’s sanctity, as conveyed through the presence of biblical models, particularly the image of the column of fire. Chapter five establishes the influence of monastic examinations of the contemplative life on Adomnán’s portrayal of Columba’s sanctity, and shows how that sanctity is confirmed in terms of his ability to contemplate divine light.

An investigation into reactivity and selectivity in cycloadditions of 1,3-dipoles with formamidines

The objective of this research was to investigate the synthesis of nitrile oxides and to study their reactivity in 1,3-dipolar cycloadditions with formamidines. Chapter one looks at the literature surrounding the 1,3-dipolar cycloaddition reaction. It explores the generation of 1,3-dipoles (mainly nitrile oxides) and dipolarophiles (predominantly amidines). It discusses the potential synthetic uses of the 1,3-dipolar cycloadducts. It examines both and inter- and intra-molecular cycloaddition reactions. It recognises the use of the 1,3-dipolar cycloadditions as a successful method in building natural products and oxadiazolines. The decomposition of oxadiazolines as a route to nitriles is also outlined in this chapter. Chapter two discusses the results of this research candidate. The preparation of nitrile oxide precursors - hydroximoyl halides - is outlined at first. The generation of nitrile oxides is then demonstrated, followed by the preparation of furoxans. Methods for preparing the reference materials (nitriles and ureas), which result from decomposition of oxadiazolines, then follow. The preparation of series of Δ2-1,2,4- oxadiazolines via the 1,3-dipolar cycloaddition reaction is illustrated in this chapter. The selectivity of the addition of nitrile oxides to dipolarophiles was tested by competition reactions, which are also described in this chapter. NMR techniques were used in the study of the kinetics of the 1,3-dipolar cycloadditions used for the preparation of a series of Δ2-1,2,4-oxadiazolines, which is addressed in this chapter. Chapter three charts the experimental procedures followed to gain results which are discussed in chapter two. It also outlines all analytical data produced during the course of this research.

Local likelihood smoothing of sample extremes

Trends in sample extremes are of interest in many contexts, an example being environmental statistics. Parametric models are often used to model trends in such data, but they may not be suitable for exploratory data analysis. This paper outlines a semiparametric approach to smoothing example extremes, based on local polynomial fitting of the generalized extreme value distribution and related models. The uncertainty of fits is assessed by using resampling methods. The methods are applied to data on extreme temperatures and on record times for the womens 3000m race.

An investigation of assessment policy and practices in terms of broad social and educational purposes

Based upon relevant literature, this study investigated the assessment policy and practices for the BSc (Hons) Computing Science programme at the University of Greenwich (UOG), contextualising these in terms of broad social and educational purposes. It discusses Assessment, and then proceeds to give a critical evaluation of the assessment policy and practices at the UOG. Although this is one case study, because any of the features of the programme are generic to other programmes and institutions, it is of wider value and has further implications. The study was concluded in the summer of 2002. It concludes that overall, the programme's assessment policy and practices are well considered in terms of broad social and educational purposes, although it identifies and outlines several possible improvements, as well as raising some major issues still to be addressed which go beyond assessment practices.

Multiphysics simulation of microwave processing using a multidomain coupled solver approach

Microwave processing of materials is numerically simulated using a coupled solver approach. Microwave heating is a complex coupled process due to the variation in dielectric properties during heating. The effects of heating an object in a electromagnetic field directly influence the manner in which it interacts with the field. Simplifying assumptions and empirical solutions do not capture the fundamental physics involved and, in general, do not provide usefully accurate solutions in a number of practical problems. In order to capture the underlying processes involved in microwave heating, the problem must be looked at in a holistic manner rather than a number of discrete processes. This contribution outlines a coupled-solver multiphysics analysis approach to the solution of practical microwave heating problems.

Subrogation and non-payment of rent

Explains the equitable doctrine of subrogation as it applies to tenants, assignees and landlords. Outlines the basic principle of subrogation and examines how the principle affects the legal position of the original tenant, the tenant's assignee, the tenant's surety and the original landlord.