Análise estratigráfica da sequência mesodevoniana-eocarbonífera da Bacia do Parnaíba, nordeste do Brasil

The Middle Devonian-Early Carboniferous sequence of the Parnaíba Basin, lithostratigraphically defined as Canindé Group, has been reinterpreted using the basic model of sequence stratigraphy. Therefore, lithology and gamma ray well-logs and seismic lines of central portion of the basin were analyzed, producing up from there diagrams 1D, isochore maps and stratigraphic sections. As results of this study, were defined two depositional cycles of second order, referred as Depositional Sequence 1 (SEQ1) and the Depositional Sequence 2 (SEQ2). The SEQ1, with interval about 37 Ma, is limited below by Early Devonian Unconformity and is equivalent to the formations Itaim, Pimenteiras and Cabeças. The SEQ2, which follows, comprises a range of about 15 Ma and is equivalent to the Longá Formation The SEQ1 starts with the lowstand systems tract, consisting of progradational parasequence set in the basal part, predominantly pelitic, deposited on a prodelta under influence of storms and the upper part consists in sandstones of deltaic front, with the maximum regressive surface on the upper limit. The transgressive systems tract, deposited above, is characterized by retrogradacional parasequence set composed of shallow shelf mudstones, deposited under storm conditions. The maximum flooding surface, upper limit of this tract, is positioned in a shale level whose radioactivity in gammaray well-log is close to 150 API. The highstand systems tract presents progradational parasequence set, comprising mudstones and sandstones deposited in shelf, fluvial-estuarine or deltaic and periglacial environments, with the upper limit the Late Devonian Unconformity. The SEQ2 was deposited in shelf environment, starting with the lowstand systems tract, that is characterized by a progradational parasequence set, followed by the transgressive systems tract, with retrogradational character. The upper limit of the tract corresponding to the fusion between maximum flooding surface with the upper limit of this sequence, which is the Early Carboniferous Unconformity, where the overlapping section was eroded. This section, which corresponds the highstand systems tract is restricted to portions at which the erosion that generate the Early-Carboniferous Unconformity was less effective, preserving the records of this unit.

Análise estratigráfica da sequência mesodevoniana-eocarbonífera da Bacia do Parnaíba, nordeste do Brasil

The Middle Devonian-Early Carboniferous sequence of the Parnaíba Basin, lithostratigraphically defined as Canindé Group, has been reinterpreted using the basic model of sequence stratigraphy. Therefore, lithology and gamma ray well-logs and seismic lines of central portion of the basin were analyzed, producing up from there diagrams 1D, isochore maps and stratigraphic sections. As results of this study, were defined two depositional cycles of second order, referred as Depositional Sequence 1 (SEQ1) and the Depositional Sequence 2 (SEQ2). The SEQ1, with interval about 37 Ma, is limited below by Early Devonian Unconformity and is equivalent to the formations Itaim, Pimenteiras and Cabeças. The SEQ2, which follows, comprises a range of about 15 Ma and is equivalent to the Longá Formation The SEQ1 starts with the lowstand systems tract, consisting of progradational parasequence set in the basal part, predominantly pelitic, deposited on a prodelta under influence of storms and the upper part consists in sandstones of deltaic front, with the maximum regressive surface on the upper limit. The transgressive systems tract, deposited above, is characterized by retrogradacional parasequence set composed of shallow shelf mudstones, deposited under storm conditions. The maximum flooding surface, upper limit of this tract, is positioned in a shale level whose radioactivity in gammaray well-log is close to 150 API. The highstand systems tract presents progradational parasequence set, comprising mudstones and sandstones deposited in shelf, fluvial-estuarine or deltaic and periglacial environments, with the upper limit the Late Devonian Unconformity. The SEQ2 was deposited in shelf environment, starting with the lowstand systems tract, that is characterized by a progradational parasequence set, followed by the transgressive systems tract, with retrogradational character. The upper limit of the tract corresponding to the fusion between maximum flooding surface with the upper limit of this sequence, which is the Early Carboniferous Unconformity, where the overlapping section was eroded. This section, which corresponds the highstand systems tract is restricted to portions at which the erosion that generate the Early-Carboniferous Unconformity was less effective, preserving the records of this unit.

Role of metalliferous mudstones and graphitic shales in the location, genesis, and paleoenvironment

The Cambrian Tally Pond volcanic belt in central Newfoundland contains numerous volcanogenic massive sulphide (VMS) deposits, prospects, and showings that are locally associated with metalliferous mudstones and/or graphitic shales. Deposits in the belt are bimodal felsic-type VMS that are both base metal- (e.g., Duck Pond, Boundary) and precious metal-enriched (e.g., Lemarchant). At the Lemarchant deposit metalliferous mudstones are genetically and spatially associated with mineralization, whereas the relationship of other mudstones and shales to massive sulphide mineralization is more intricate and remains not fully understood. Metalliferous mudstones represent a hiatus in the volcanic activity where the deposition of hydrothermal products dominated over the abiogenic background sedimentation and/or dilution by volcaniclastic-epiclastic material. Lithogeochemical signatures allow one to distinguish between predominantly hydrothermally or detritally (i.e., non-hydrothermal) derived material. Metalliferous mudstones with a significant hydrothermal component, like those at Lemarchant, have elevated Fe/Al and base-metal contents, compared to detrital shales, and shale-normalized negative Ce and positive Eu anomalies, indicative of deposition from high temperature (>250°C) hydrothermal fluids within an oxygenated water column. Mudstones and shales sampled from other locations in the Tally Pond volcanic belt have more variable signatures ranging from hydrothermal (signatures as above) to non-hydrothermal (no positive Eu-anomalies, flat REE patterns), with some that have mixed (hydrothermal and detrital) signatures. Both S and Pb isotopic compositions indicate that proximal sulphides hosted in mudstones immediately associated with massive sulphide mineralization within the Lemarchant deposit contain a higher proportion of sulphur derived from hydrothermal sources and processes, and have more juvenile lead contributions, when compared to sulphides distal (not associated with massive sulphides) from mineralization. Lead and Nd isotopic compositions of both whole rock and minerals in the Lemarchant mudstones indicate involvement of underlying crustal basement during massive sulphide formation and throughout the evolution of the Tally Pond belt. Metalliferous mudstones precipitated early in the massive sulphide depositional history, but also have undergone syn- and post-ore-forming processes and have a larger lateral extent than the mineralization. Using lithogeochemistry, whole rock and in situ stable and radiogenic isotopes it is possible to distinguish prospective vent proximal (immediately associated with massive sulphide mineralization) from less prospective distal (not associated with massive sulphides) depositional environments and to reconstruct the paleotectonic setting on a deposit- to regional-scale for the Lemarchant deposit and other mudstone-associated prospects in the Tally Pond volcanic belt.

Colorado's Piceance Basin: Variation in the local public finance effects of oil and gas development

A large increase in natural gas production occurred in western Colorado’s Piceance basin in the mid- to late-2000s, generating a surge in population, economic activity, and heavy truck traffic in this rural region. We describe the fiscal effects related to this development for two county governments: Garfield and Rio Blanco, and two city governments: Grand Junction and Rifle. Counties maintain rural road networks in Colorado, and Garfield County’s ability to fashion agreements with operators to repair roads damaged during operations helped prevent the types of large new costs seen in Rio Blanco County, a neighboring county with less government capacity and where such agreements were not made. Rifle and Grand Junction experienced substantial oil- and gas-driven population growth, with greater challenges in the smaller, more isolated, and less economically diverse city of Rifle. Lessons from this case study include the value of crafting road maintenance agreements, fiscal risks for small and geographically isolated communities experiencing rapid population growth, challenges associated with limited infrastructure, and the desirability of flexibility in the allocation of oil- and gas-related revenue.

Local government revenue from oil and gas production

Oil and gas production generates substantial revenue for state and local governments. This report examines revenue from oil and gas production flowing to local governments through four mechanisms: (i) state taxes or fees on oil and gas production; (ii) local property taxes on oil and gas property; (iii) leasing of state-owned land; and (iv) leasing of federally owned land. We examine every major oil- and gas-producing state and find that the share of oil and gas production value allocated to and collected by local governments ranges widely, from 0.5 percent to more than 9 percent due to numerous policy differences among states. School districts and trust funds endowing future school operations tend to see the highest share of revenue, followed by counties. Municipalities and other local governments with more limited geographic boundaries tend to receive smaller shares of oil and gas driven revenue. Some states utilize grant programs to allocate revenue to where impacts from the industry are greatest. Others send most revenue to state operating or trust funds, with little revenue earmarked specifically for local governments.

Local fiscal effects of oil and gas development in eight states

Oil and gas production in the United States has increased dramatically in the past 10 years. This growth has important implications for local governments, which often see new revenues from a variety of sources: property taxes on oil and gas property, sales taxes driven by the oil and gas workforce, allocations of state revenues from severance taxes or state and federal leases, leases on local government land, and contributions from oil and gas companies to support local services. At the same time, local governments tend to experience a range of new costs such as road damage caused by heavy industry truck traffic, increased demand for emergency services and law enforcement, and challenges with workforce retention. This report examines county and municipal fiscal effects in 14 oil- and gas-producing regions of eight states: AK, CA, KS, OH, OK, NM, UT, and WV. We find that for most local governments, oil and gas development—whether new or longstanding—has a positive effect on local public finances. However, effects can vary substantially due to a variety of local factors and policy issues. For some local governments, particularly those in rural regions experiencing large increases in development, revenues have not kept pace with rapidly increased costs and demand for services, particularly on road repair.

(Table 1) Organic carbon, hydrogen and oxygen index and hydrocarbons at DSDP Hole 93-603B

C2-C8 hydrocarbon concentrations (about 35 compounds identified, including saturated, aromatic, and olefinic compounds) from 27 shipboard-sealed, deep-frozen core samples of DSDP Hole 603B off the east coast of North America were determined by a gas-stripping/thermovaporization method. Total yields representing the hydrocarbons dissolved in the pore water and adsorbed on the mineral surfaces of the sediments vary from 22 to 2400 ng/g of dryweight sediment. Highest yields are measured in the two black shale samples of Core 603B-34 (hydrogen index of 360 and 320 mg/g Corg, respectively). In organic-carbon-normalized units these samples have hydrocarbon contents of 12,700 and 21,500 ng/g Corg, respectively, indicating the immaturity of their kerogens. Unusually high organic-carbonnormalized yields are associated with samples that are extremely lean in organic carbon. It is most likely that they are enriched by small amounts of migrated light hydrocarbons. This applies even to those samples with high organic-carbon contents (1.3-2.2%) of Sections 603B-28-4, 603B-29-1, 603B-49-2, and 603B-49-3, because they have an extremely low hydrocarbon potential (hydrogen index between 40 and 60 mg/g Corg). Nearly all samples were found to be contaminated by varying amounts of acetone that is used routinely in large quantities on board ship during core-cutting procedures. Therefore, 48 samples from the original set of 75 collected had to be excluded from the present study.

Geochemical composition of ODP Site 210-1276 shales

During Ocean Drilling Program Leg 210, a greatly expanded sedimentary sequence of continuous Cretaceous black shales was recovered at Site 1276. This section corresponds to the Hatteras Formation, which has been documented widely in the North Atlantic Ocean. The cored sequence extends from the lowermost Albian, or possibly uppermost Aptian, to the Cenomanian/Turonian boundary and is characterized by numerous gravity-flow deposits and sporadic, finely laminated black shales. The sequence also includes several sedimentary intervals with high total organic carbon (TOC) contents, in several instances of probable marine origin that may record oceanic anoxic events (OAE). These layers might correspond to the Cenomanian-Turonian OAE 2; the mid-Cenomanian event; and OAE 1b, 1c, and 1d in the Albian. In addition, another interval with geochemical characteristics similar to OAE-type layers was recognized in the Albian, although it does not correspond to any of the known OAEs. This study investigates the origin of the organic matter contained within these black shale intervals using TOC and CaCO3 contents, Corg/Ntot ratios, organic carbon and nitrogen isotopes, trace metal composition, and rock-eval analyses. Most of these black shale intervals, especially OAE 2 and 1b, are characterized by low 15N values (<0) commonly observed in mid-Cretaceous black shales, which seem to reflect the presence of an altered nitrogen cycle with rates of nitrogen fixation significantly higher than in the modern ocean.

Ketones in hydrothermal petroleums and sediments from Guaymas Basin

The polar compound (NSO) fractions of seabed petroleums and sediment extracts from the Guaymas Basin hydrothermal system have been analyzed by gas chromatography and gas chromatography-mass spectrometry. The oils were collected from the interiors and exteriors of high temperature hydrothermal vents and represent hydrothermal pyrolysates that have migrated to the seafloor by hydrothermal fluid circulation. The downcore samples are representative of both thermally unaltered and thermally altered sediments. The survey has revealed the presence of oxygenated compounds correlated with samples exhibiting a high degree of thermal maturity. Several homologous series of related ketone isomers are enriched in the interiors of the hydrothermal vent samples or in hydrothermally-altered sequences of the downcore sediments (DSDP Holes 477 and 481A). The n-alkanones range in carbon number from C11 to C33 with a Cmax from 14 to 23, distributions that are similar to those of the n-alkanes. The alkan-2-ones are usually in highest concentrations, with lower amounts of 3-, 4-, 5-, 6-, 7- (and higher) alkanones, and they exhibit no carbon number preference (there is an odd carbon number preference of alkanones observed for downcore samples). The alkanones are enriched in the interiors of the hydrothermal vent spires or in downcore hydrothermally-altered sediments, indicating an origin at depth or in the hydrothermal fluids and not from an external biogenic deposition. Minor amounts of C13 and C18 isoprenoid ketones are also present. Simulation of the natural hydrothermal alternation process by laboratory hydrous pyrolysis techniques provided information regarding the mode of alkanone formation. Hydrous pyrolysis of n-C32H66 at 350°C for 72 h with water only or water with inorganic additives has been studied using a stainless steel reaction vessel. In each experiment oxygenated hydrocarbons, including alkanones, were formed from the n-alkane. The product distributions indicate a reaction pathway consisting of n-alkanes and a-olefins as primary cracking products with internal olefins and alkanones as secondary reaction products. Hydrous pyrolyses of Messel shale spiked with molecular probes have been performed under similar time and temperature constraints to produce alkanone distributions like those found in the hydrothermal vent petroleums.

(Table 1) Low molecular weight hydrocarbon concentrations and organic carbon contents at DSDP Hole 71-511

C2-C8 hydrocarbons (36 compounds identified) from 56 shipboard sealed, deep-frozen core samples of DSDP Leg 71, Site 511, Falkland Plateau, South Atlantic, were analyzed by a combined hydrogen stripping-thermovaporization method. Concentrations, which represent hydrocarbons dissolved in the pore water and adsorbed to the mineral surfaces of the sediment, vary from 24 ng/g of dry weight sediment in Lithologic Unit 4 to 17,400 ng/g in Lithologic Unit 6 ("black shale" unit). Likewise, the organic carbon normalized C2-C8 hydrocarbon concentrations range from 104 to 3.5 x 105 ng/g Corg. The latter value is more than one order of magnitude lower than expected for petroleum source beds in the main phase of oil generation. The low maturity at 600 meters depth is further supported by light hydrocarbon concentration ratios. The change of the kerogen type from Lithologic Unit 5 (Type III) to 6 (Type II) is evidenced by changes in the C6 and C7 hydrocarbon composition. Redistribution phenomena are observed close to the Tertiary-Cretaceous unconformity and at the contact between the "black shale" unit and the overlying Cretaceous chalks and claystones. Otherwise, the low molecular weight hydrocarbons in Hole 511 are formed in situ and remain at their place of formation. The core samples turned out to be contaminated by large quantities of acetone, which is routinely used as a solvent during sampling procedures onboard Glomar Challenger.

Nd isotopes an geochemistry of bulk deep sea sediments of the Atlantic Ocean

Nd isotopes preserved in fossil fish teeth and ferromanganese crusts have become a common tool for tracking variations in water mass composition and circulation through time. Studies of Nd isotopes extracted from Pleistocene to Holocene bulk sediments using hydroxylamine hydrochloride (HH) solution yield high resolution records of Nd isotopes that can be interpreted in terms of deep water circulation, but concerns about diagenesis and potential contamination of the seawater signal limit application of this technique to geologically young samples. In this study we demonstrate that Nd extracted from the > 63 µm, decarbonated fraction of older Ocean Drilling Program (ODP) sediments using a 0.02 M HH solution produces Nd isotopic ratios that are within error of values from cleaned fossil fish teeth collected from the same samples, indicating that the HH-extractions are robust recorders of deep sea Nd isotopes. This excellent correlation was achieved for 94 paired fish teeth and HH-extraction samples ranging in age from the Miocene to Cretaceous, distributed throughout the north, tropical and south Atlantic, and composed of a range of lithologies including carbonate-rich oozes/chalks and black shales. The strong Nd signal recovered from Cretaceous anoxic black shale sequences is unlikely to be associated with ferromanganese oxide coatings, but may be derived from abundant phosphatic fish teeth and debris or organic matter in these samples. In contrast to the deep water Nd isotopic signal, Sr isotopes from HH-extractions are often offset from seawater values, suggesting that evaluation of Sr isotopes is a conservative test for the integrity of Nd isotopes in the HH fraction. However, rare earth elements (REE) from the HH-extractions and fish teeth produce distinctive middle REE bulge patterns that may prove useful for evaluating whether the Nd isotopic signal represents uncontaminated seawater. Alternatively, a few paired HH-extraction and cleaned fish teeth samples from each site of interest can be used to verify the seawater composition of the HH-extractions. The similarity between isotopic values for the HH-extraction and fish teeth illustrates that the extensive cleaning protocol applied to fish teeth samples is not necessary in typical, carbonate-rich, deep sea sediments.

Geochemical and stable isotope composition of Middle Campanian marl-limestone rhythmites of the Lehrte West Syncline near Hannover (Lower Saxony, northern Germany)

A cyclic marl-limestone succession of Middle-Late Campanian age has been investigated with respect to a Milankovitch-controlled origin of geochemical data. In general, the major element geochemistry of the marl-limestone rhythmites can be explained by a simple two-component mixing model with the end-members calcium carbonate and 'average shale'-like material. Carbonate content varies from 55 to 90%. Non-carbonate components are clay minerals (illite, smectite) and biogenic silica from sponge spicules, as well as authigenically formed zeolites (strontian heulandite) and quartz. The redox potential suggests oxidizing conditions throughout the section. Trace element and stable isotopic data as well as SEM investigations show that the carbonate mud is mostly composed of low-magnesium calcitic tests of planktic coccolithophorids and calcareous dinoflagellate cysts (calcispheres). Diagenetic overprint results in a decrease of 2% d18O and an increase in Mn of up to 250 ppm. However, the sediment seems to preserve most of its high Sr content compared to the primary low-magnesium calcite of co-occurring belemnite rostra. The periodicity of geochemical cycles is dominated by 413 ka and weak signals between 51 and 22.5 ka, attributable to orbital forcing. Accumulation rates within these cycles vary between 40 and 50 m/Ma. The resulting cyclic sedimentary sequence is the product of (a) changes in primary production of low-magnesium calcitic biogenic material in surface waters within the long eccentricity and the precession, demonstrated by the CaCO3 content and the Mg/Al, Mn/Al and Sr/Al ratios, and (b) fluctuations in climate and continental weathering, which changed the quality of supplied clay minerals (the illite/smectite ratio), demonstrated by the K/Al ratio. High carbonate productivity correlates with smectite-favouring weathering (semi-arid conditions, conspicuously dry and moist seasonal changes in warmer climates). Ti as the proxy indicator for the detrital terrigenous influx, as well as Rb, Si, Zr and Na, shows only low frequency signals, indicating nearly constant rates of supply throughout the more or less pure pelagic carbonate deposition of the long-lasting third-order Middle-Upper Campanian sedimentary cycle.

Bulk geochemical and Rock-Eval data of sediment core IKU-7430/10-U-01 (Table 1)

The late Volgian (early "Boreal" Berriasian) sapropels of the Hekkingen Formation of the central Barents Sea show total organic carbon (TOC) contents from 3 to 36 wt%. The relationship between TOC content and sedimentation rate (SR), and the high Mo/Al ratios indicate deposition under oxygen-free bottom-water conditions, and suggest that preservation under anoxic conditions has largely contributed to the high accumulation of organic carbon. Hydrogen index values obtained from Rock-Eval pyrolysis are exceptionally high, and the organic matter is characterized by well-preserved type II kerogen. However, the occurrence of spores, freshwater algae, coal fragments, and charred land-plant remains strongly suggests proximity to land. Short-term oscillations, probably reflecting Milankovitch-type cyclicity, are superimposed on the long-term trend of constantly changing depositional conditions during most of the late Volgian. Progressively smaller amounts of terrestrial organic matter and larger amounts of marine organic matter upwards in the core section may have been caused by a continuous sea-level rise.