Occupational mobility chains and the role of job opportunities for upward, lateral and downward mobility in Switzerland

This paper addresses the rarely studied relationship between job vacancies and inter-firm upward, lateral, and downward status mobility in an occupationally segmented labor market, taking Switzerland as the example. To conceptualize mobility mechanisms in this type of labor market, we introduce the concept of “occupational mobility chains” and test its validity. This concept provides the backdrop for developing time-dependent measures of individual job opportunities based on Swiss Job Monitor data. We link these measures with career data taken from the Swiss Life History Study and employ event history analysis to test different propositions of the ways in which status mobility is contingent on the number and the status of vacant positions. Results support our assumption that in occupationally segmented labor markets vacant positions affect status mobility only to the degree that they are located within workers’ occupational mobility chains.

Magnetic resonance imaging and computer tomography of brain lesions in water buffaloes and cattle stunned with handguns or captive bolts

Owing to the demand for genuine mozzarella, some 330 water buffaloes are being slaughtered every year in Switzerland albeit a stunning procedure meeting animal welfare and occupational safety requirements remains to be established. To provide a basis for improvements, we sized anatomical specifics in water buffaloes and cattle and we assessed brain lesions after stunning with captive bolts or handguns by diagnostic imaging. In water buffaloes and cattle, the median distance from the frontal skin surface to the inner bone table was 74.0 mm (56.0–100.0 mm) vs 36.6 mm (29.3–44.3 mm) and from skin to the thalamus 144.8 mm (117.1–172.0 mm) vs 102.0 (101.0–121.0 mm), respectively. Consequently, customary captive bolt stunners may be inadequate. Free bullets are potentially suitable for stunning buffaloes but involve occupational safety hazards. The results of the present study shall be used to develop a device allowing effective and safe stunning of water buffaloes.

Assessment of Functioning when Conducting Occupational Capacity Evaluations - What is "Evidence-Based"?

Aim: Occupational capacity evaluations have previously been subject to criticism for lacking in quality and consistency. To the authors' knowledge, there is no clear consensus on the best way to formally assess functioning within capacity evaluations. In this review we investigated different instruments that are used to assess functioning in occupational capacity evaluations. Methods: Systematic review of the literature. Results: Though several instruments that assess functional capacity were found in our search, a specific validated instrument assessing occupational capacity as part of a larger psychiatric evaluation was not found. The limitations of the existing instruments on assessing functional capacity are discussed. Conclusion: Medical experts relying on instruments to conduct functional capacity evaluations should be cognizant of their limitations. The findings call for the development and use of an instrument specifically designed to assess the functional and occupational capacity of psychiatric patients, which is also likely to improve the quality of these reports.

Feasibility study of a single-blind randomised controlled trial of an occupational therapy intervention.

BACKGROUND Several factors facilitate or hinder efficacy research in occupational therapy. Strategies are needed, therefore, to support the successful implementation of trials. AIM To assess the feasibility of conducting a randomised controlled trial (RCT). The main feasibility objectives of this study were to assess the process, resources, management, and scientific basis of a trial RCT. MATERIAL AND METHODS A total of 10 occupational therapists, between the ages of 30 and 55 (M 43.4; SD 8.3) with seven to 26 years' (M 14.3; SD 6.1) experience, participated in this study. Qualitative data collected included minutes of meetings, reports, and field notes. The data were analysed based on the principles of content analysis, using feasibility objectives as the main categories. RESULTS Data analysis revealed strengths in relation to retention and inclusion criteria of participants, the study protocol, study organisation, and the competence of researchers. Weaknesses were found related to recruitment, randomisation, data collection, time for training and communication, commitment, and design. CONCLUSION The findings indicated that there are several factors which had a considerable impact on the implementation of an RCT in practice. However, it was useful to assess methods and procedures of the trial RCT as a basis to refine research plans.

How specific is apprenticeship training? Evidence from inter-firm and occupational mobility after graduation

Do apprenticeships convey mainly general or also firm- and occupation-specific human capital? Specific human capital may allow for specialization gains, but may also lead to allocative inefficiency due to mobility barriers. We analyse the case of Switzerland, which combines a comprehensive, high-quality apprenticeship system with a lightly regulated labour market. To assess human capital transferability after standardized firm-based apprenticeship training, we analyse inter-firm and occupational mobility and their effects on post-training wages. Using a longitudinal data set based on the PISA 2000 survey, we find high inter-firm and low occupational mobility within one year after graduation. Accounting for endogenous changes, we find a negative effect of occupation changes on wages, but no significant wage effect for firm changes. This indicates that occupation-specific human capital is an important component of apprenticeship training and that skills are highly transferable within an occupational field.

AN OCCUPATIONAL INJURY MANAGEMENT INFORMATION SYSTEM FOR THE UNIVERSITY OF TEXAS HEALTH SCIENCE CENTER AT HOUSTON

The purpose of this research and development project was to develop a method, a design, and a prototype for gathering, managing, and presenting data about occupational injuries.^ State-of-the-art systems analysis and design methodologies were applied to the long standing problem in the field of occupational safety and health of processing workplace injuries data into information for safety and health program management as well as preliminary research about accident etiologies. The top-down planning and bottom-up implementation approach was utilized to design an occupational injury management information system. A description of a managerial control system and a comprehensive system to integrate safety and health program management was provided.^ The project showed that current management information systems (MIS) theory and methods could be applied successfully to the problems of employee injury surveillance and control program performance evaluation. The model developed in the first section was applied at The University of Texas Health Science Center at Houston (UTHSCH).^ The system in current use at the UTHSCH was described and evaluated, and a prototype was developed for the UTHSCH. The prototype incorporated procedures for collecting, storing, and retrieving records of injuries and the procedures necessary to prepare reports, analyses, and graphics for management in the Health Science Center. Examples of reports, analyses, and graphics presenting UTHSCH and computer generated data were included.^ It was concluded that a pilot test of this MIS should be implemented and evaluated at the UTHSCH and other settings. Further research and development efforts for the total safety and health management information systems, control systems, component systems, and variable selection should be pursued. Finally, integration of the safety and health program MIS into the comprehensive or executive MIS was recommended. ^

Comparison of a traditional and a multilevel Cox Proportional Hazards model

Hierarchically clustered populations are often encountered in public health research, but the traditional methods used in analyzing this type of data are not always adequate. In the case of survival time data, more appropriate methods have only begun to surface in the last couple of decades. Such methods include multilevel statistical techniques which, although more complicated to implement than traditional methods, are more appropriate. ^ One population that is known to exhibit a hierarchical structure is that of patients who utilize the health care system of the Department of Veterans Affairs where patients are grouped not only by hospital, but also by geographic network (VISN). This project analyzes survival time data sets housed at the Houston Veterans Affairs Medical Center Research Department using two different Cox Proportional Hazards regression models, a traditional model and a multilevel model. VISNs that exhibit significantly higher or lower survival rates than the rest are identified separately for each model. ^ In this particular case, although there are differences in the results of the two models, it is not enough to warrant using the more complex multilevel technique. This is shown by the small estimates of variance associated with levels two and three in the multilevel Cox analysis. Much of the differences that are exhibited in identification of VISNs with high or low survival rates is attributable to computer hardware difficulties rather than to any significant improvements in the model. ^

Occupational beryllium exposure: Reconciling federal policies, regulations and contractor implementation guides to protect worker health

Beryllium is a widely distributed, highly toxic metal. When beryllium particulates enter the body, the body's defense mechanisms are engaged. When the body's defenses cannot easily remove the particulates, then a damage and repair cycle is initiated. This cycle produces chronic beryllium disease (CBD), a progressive, fibrotic respiratory involvement which eventually suffocates exposed individuals. ^ Beryllium disease is an occupational disease, and as such it can be prevented by limiting exposures. In the 1940s journalists reported beryllium deaths at Atomic Energy Commission (AEC) facilities, the Department of Energy's (DOE) predecessor organization. These reports energized public pressure for exposure limits, and in 1949 AEC implemented a 2 μg/m3 permissible exposure limit (PEL). ^ The limits appeared to stop acute disease. In contrast, CBD has a long latency period between exposure and diagnosable disease, between one and thirty years. The lack of immediate adverse health consequences masked the seriousness of chronic disease and pragmatically removed CBD from AEC/DOE's political concern. ^ Presently the PEL for beryllium at DOE sites remains at 2 μg/m 3. This limit does not prevent CBD. This conclusion has long been known, although denied until recently. In 1999 DOE acknowledged the limit's ineffectiveness in its federal regulation governing beryllium exposure, 10 CFR 850. ^ Despite this admission, the PEL has not been reduced. The beryllium manufacturer and AEC/DOE have a history of exerting efforts to maintain and protect the status quo. Primary amongst these efforts has been creation and promotion of disinformation within peer reviewed health literature which discusses beryllium, exposures, health effects and treatment, and targeting graduate school students so that their perspective is shaped early. ^ Once indoctrinated with incorrect information, professionals tend to overlook aerosol and respiratory mechanics, immunologic and carcinogenic factors. They then apply tools and perspectives derived from the beryllium manufacturer and DOE's propaganda. Conclusions drawn are incorrect. The result is: health research and associated policy is conducted with incorrect premises. Effective disease management practices are not implemented. ^ Public health protection requires recognition of the disinformation and its implications. When disinformation is identified, then effective health policies and practices can be developed and implemented. ^

Parental demographic risk factors and occupational exposure to ionizing radiation for achondroplasia, thanatophoric and autosomal deletions in Texas, 1996--2002

Little is known about the etiology of Achondroplasia (AC), Thanatophoric Dwarfism (TD), and autosomal deletions (CD). These syndromes are due to fully penetrate genetic mutations, yet arise de novo, instead of being inherited. We examined the association between parental demographic characteristics and parental occupations with exposure to ionizing radiation and these birth defects. ^ We conducted a cross-sectional study and two case-control studies using a large database that was created by linking records from Texas Birth Defects Registry, Texas birth certificates and Texas fetal death certificates from 1996 to 2002. The first case-control study was matched on paternal age and examined 73 cases of AC and 43 cases of TD. The second case-control study was unmatched and examined 343 cases of autosomal deletion syndromes. ^ We used a job exposure matrix (JEM) to measure exposures to ionizing radiation in the workplace. This gives an estimate of the intensity and probability of exposure to ionizing radiation for each occupation and industry. ^ The prevalence rate of Achondroplasia, Thanatophoric Dwarfism and autosomal deletions was 0.36 per 10,000, 0.21 per 10,000, and 1.68 per 10,000 births respectively in Texas 1996–2002. ^ Older fathers had a strong increase in the risk of having offspring with AC or TD and a modest increase in the risk of CD. Fathers who were Black or Hispanic were less likely to have infants with AC or TD compared to Whites (adjusted POR=0.61; 95% CI 0.30, 1.26 and 0.44; 95% CI 0.27, 0.88, respectively). Black fathers and Hispanic mothers were also less likely to have infants with CD (adjusted POR=0.54; 95% CI 0.22, 1.35 and 0.62; 95% CI 0.39, 0.97). ^ After adjusting for other parental demographic factors, there was no significant relation between fathers exposure to ionizing radiation in the work place and AC or TD (adjusted OR=0.48; 95% CI 0.19, 1.25) and no significant relation between parental exposure to ionizing radiation in the work place and CD (adjusted OR=1.16; 95% CI 0.73, 1.85). ^ This is the first study to find an association between father's age and TD and CD and paternal race and AC or CD. Parental exposure to radiation for therapeutic or diagnostic indications was not measured, thus it can not be excluded as a cause of these birth defects. ^

Risk of adult-onset asthma in Mexican-American women employed in food preparation or food service

Existing literature examining the association between occupation and asthma has not been adequately powered to address this question in the food preparation or food service industries. Few studies have addressed the possible link between occupational exposure to cooking fumes and asthma. This secondary analysis of cohort study data aimed to investigate the association between adult-onset asthma and exposure to: (a) cooking fumes at work or (b) longest-held employment in food preparation or food service (e.g. waiters and waitresses, food preparation workers, non-restaurant food servers, etc.). Participants arose from a cohort of Mexican-American women residing in Houston, TX, recruited between July 2001 and June 2007. This analysis used Cox proportional-hazards regression to estimate the hazard ratio of adult-onset asthma given the exposures of interest, adjusting for age, BMI, smoking status, acculturation, and birthplace. We found a strong association between adult-onset asthma and occupational exposure to cooking fumes (hazard ratio [HR] = 1.77; 95% confidence interval [CI], 1.15, 2.72), especially in participants whose longest-held occupation was not in the food-related industry (HR = 2.12; 95% CI, 1.21, 3.60). In conclusion, adult-onset asthma is a serious public health concern for food industry workers. ^

The normal range of the leukocyte count: Implications for surveillance of occupational and environmental exposure and the practice of preventive medicine

Leukopenia, the leukocyte count, and prognosis of disease are interrelated; a systematic search of the literature was undertaken to ascertain the strength of the evidence. One hundred seventy-one studies were found from 1953 onward pertaining to the predictive capabilities of the leukocyte count. Of those studies, 42 met inclusion criteria. An estimated range of 2,200cells/μL to 7,000cells/μL was determined as that which indicates good prognosis in disease and indicates the least amount of risk to an individual overall. Tables of the evidence are included indicating the disparate populations examined and the possible degree of association. ^

Occupational respiratory disease in the services industry

Objective. To describe the spectrum and occurrence of occupational exposures of relevance to the respiratory system and their subsequent adverse effects within the service industries and occupations, as outlined by the U.S. Department of Labor Bureau of Labor Statistics Occupational Outlook Handbook, 2007. ^ Design. Systematic review of the literature from an Ovid search including years 1950 to 2008. Initially, occupational respiratory disease categories were searched, and then combined with each of the different occupations for a comprehensive review of the literature. ^ Results. Ten groups within the U.S. Department of Labor Bureau of Labor Statistics Occupational Outlook Handbook, 2007 were identified as having exposures leading to occupational respiratory disease. These include janitors/cleaners, dental personnel, cosmetology professionals, traffic police, veterinary personnel, firefighters, healthcare workers, bakers, and bar/restaurant workers. The most common respiratory disorder affecting this population was occupational asthma caused by many different exposures in each occupation. The biggest limitation was the absence of a uniform reporting method for occupational respiratory diseases. ^ Conclusion. There is evidence that there are risks for occupational respiratory disease in the services industry. ^ Key Words: occupational and respiratory disease and service industries ^