Strength and damage analysis of composite-aluminium adhesively-bonded single-lap joints

With the need to find an alternative way to mechanical and welding joints, and at the same time to overcome some limitations linked to these traditional techniques, adhesive bonds can be used. Adhesive bonding is a permanent joining process that uses an adhesive to bond the components of a structure. Composite materials reinforced with fibres are becoming increasingly popular in many applications as a result of a number of competitive advantages. In the manufacture of composite structures, although the fabrication techniques reduce to the minimum by means of advanced manufacturing techniques, the use of connections is still required due to the typical size limitations and design, technological and logistical aspects. Moreover, it is known that in many high performance structures, unions between composite materials with other light metals such as aluminium are required, for purposes of structural optimization. This work deals with the experimental and numerical study of single lap joints (SLJ), bonded with a brittle (Nagase Chemtex Denatite XNRH6823) and a ductile adhesive (Nagase Chemtex Denatite XNR6852). These are applied to hybrid joints between aluminium (AL6082-T651) and carbon fibre reinforced plastic (CFRP; Texipreg HS 160 RM) adherends in joints with different overlap lengths (LO) under a tensile loading. The Finite Element (FE) Method is used to perform detailed stress and damage analyses allowing to explain the joints’ behaviour and the use of cohesive zone models (CZM) enables predicting the joint strength and creating a simple and rapid design methodology. The use of numerical methods to simulate the behaviour of the joints can lead to savings of time and resources by optimizing the geometry and material parameters of the joints. The joints’ strength and failure modes were highly dependent on the adhesive, and this behaviour was successfully modelled numerically. Using a brittle adhesive resulted in a negligible maximum load (Pm) improvement with LO. The joints bonded with the ductile adhesive showed a nearly linear improvement of Pm with LO.

IDENTIFICATION OF CANINE VISCERAL LEISHMANIASIS IN A PREVIOUSLY UNAFFECTED AREA BY CONVENTIONAL DIAGNOSTIC TECHNIQUES AND CELL-BLOCK FIXATION

After the report of a second case of canine visceral leishmaniasis (CVL) in São Bento da Lagoa, Itaipuaçu, in the municipality of Maricá, Rio de Janeiro State, an epidemiological survey was carried out, through active search, totaling 145 dogs. Indirect immunofluorescence assay (IFA), enzyme-linked immunosorbent assay (ELISA), and rapid chromatographic immunoassay based on dual-path platform (DPP(r)) were used to perform the serological examinations. The parasitological diagnosis of cutaneous fragments was performed by parasitological culture, histopathology, and immunohistochemistry. In the serological assessment, 21 dogs were seropositive by IFA, 17 by ELISA, and 11 by DPP(r), with sensitivity of 66.7%, 66.7% and 50%, and specificity of 87.2%, 90.2% and 94%, respectively for each technique. The immunohistochemistry of bone marrow using the cell-block technique presented the best results, with six positive dogs found, three of which tested negative by the other parasitological techniques. Leishmania sp. was isolated by parasitological culture in three dogs. The detection of autochthonous Leishmania infantum in Itaipuaçu, and the high prevalence of seropositive dogs confirm the circulation of this parasite in the study area and alert for the risk of expansion in the State of Rio de Janeiro.

From the portolan chart of the mediterranean to the latitude chart of the atlantic

Thesis submitted to the Instituto Superior de Estatística e Gestão de Informação da Universidade Nova de Lisboa in partial fulfillment of the requirements for the Degree of Doctor of Philosophy in Information Management – Geographic Information Systems

Comparison of different techniques for mouse transgenesis

RESUMO: O uso de ratinhos transgénicos em neurociências aumentou consideravelmente nos últimos anos devido ao crescente interesse em compreender o cérebro e a necessidade de solucionar situações clínicas do foro neurológico e psiquiátrico. Para esse efeito, diferentes métodos de produção de animais transgénicos têm sido testados. O objectivo desta tese foi comparar métodos de integração aleatória de um transgene no genoma de ratinhos em termos de eficiência, estabilidade da integração do transgene, número de animais e de horas de trabalho necessárias para cada método. Assim, foi comparado o método mais utilizado - microinjecção pronuclear (PNMI) - com duas outras técnicas cujo desempenho foi considerado promissor – a transferência génica através dos testículos por electroporação e transfecção por lentivírus in vivo. As três técnicas foram realizadas usando um gene repórter sob o controlo de um promotor constitutivo, e depois reproduzidas usando um gene de interesse de modo a permitir obtenção de um animal capaz de ser usado em experimentação laboratorial. O transgene de interesse utilizado codifica uma proteína de fusão correspondendo a uma variante da rodopsina (channelrhodopsin) fundida à proteína enhanced yellow fluorescente protein ((EYFP) resultando num produto designado ChR2-EYFP. Este animal transgénico apresentaria expressão deste canal iónico apenas em células dopaminergicas, o que, com manipulação optogenética, tornaria possivel a activação especifica deste grupo de neurónios e, simultaneamente, a observação do impacto desta manipulação no comportamento num animal em livre movimento. Estas ferramentas são importantes na investigação básica em neurociências pois ajudam a esclarecer o papel de grupos específicos de neurónios e compreender doenças como a doença de Parkinson ou a esquizofrenia onde a função de certos tipos de neurónios de encontra alterada. Quando comparados os três métodos realizados verifica-se que usando um gene repórter PMNI resulta em 31,3% de, a de animais transgénicos obtidos, a electroporação de testículos em 0% e a injecção de lentivírus em 0%. Quando usado o gene de interesse, os resultados obtidos são, respectivamente, 18,8%, 63,9% e 0%.--------------ABSTRACT: The use of transgenic mice is increasing in all fields of research, particularly in neuroscience, due to the widespread need of animal models to solve neurological and psychiatric medical conditions. Different methodologies have been tested in the last decades in order to produce such transgenic animals. The ultimate goal of this thesis is to compare different methods of random integration of a transgene in the genome of mice in terms of efficiency, stability of the transgene integration, number of animals required and the labour intensity of each technique. We compared the most used method – pronuclear microinjection (PNMI) – with two other promising techniques – Testis Mediated Gene Transfer (TMGT) by electroporation and in vivo lentiviral transfection. The three techniques were performed using a reporter gene – green fluorescent protein (GFP), whose transcription was driven by the constitutive cytomegalovirus (CMV) promoter. These three techniques were later reproduced using the tyrosine hydroxylase promoter (TH) and the neuronal manipulator, channelrhodopsin-2 fused to the enhanced yellow fluorescent reporter protein (ChR2-EYFP). The transgenic animal we sough to produce would express the light driven channel only in dopaminergic cells, making possible to specifically activate this group of neurons, while simultaneously observe the behaviour in a freely moving animal. This is a very important tool in basic neuroscience research since it helps to clarify the role of specific groups of neurons, map circuits in the brain, and consequently understand neurological diseases such as Parkinson’s disease or schizophrenia, where the function of certain types of neurons is affected. When comparing the three methods, it was verified that using a reporter gene PNMI resulted in 31.3% of transgenic mice obtained, testis electroporation in 0% and lentiviral injection in 0%. When using the gene of interest, the results obtained were, respectively, 18.8%, 63.9% and 0%.

Numerical Evaluation of Ventilation Performance in Children Day Care Centres

Modelling of ventilation is strongly dependent on the physical characteristics of the building of which precise evaluation is a complex and time consuming task. In the frame of a research project, two children day care centres (CDCC) have been selected in order to measure the envelope air permeability, the flow rate of mechanical ventilation systems and indoor and outdoor temperature. The data obtained was used as input to the computer code CONTAM for ventilation simulations. The results obtained were compared with direct measurements of ventilation flow from short term measurements with CO2 tracer gas and medium term measurements with perfluorocarbon tracer (PFT) gas decay method. After validation, in order to analyse the main parameters that affect ventilation, the model was used to predict the ventilation rates for a wide range of conditions. The purpose of this assessment was to find the best practices to improve natural ventilation. A simple analytical method to predict the ventilation flow rate of rooms is also presented. The method is based on the estimation of wind effect on the room through the evaluation of an average factor and on the assessment of relevant cross section of gaps and openings combined in series or in parallel. It is shown that it may be applied with acceptable accuracy for this type of buildings when ventilation is due essentially to wind action.

Unsupervised classification of remote sensing images combining Self Organizing Maps and segmentation techniques

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Behavior monitoring and behavioral exchange: an approach from geospatial technologies involving gamification techniques

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Le vert et le rouge: a study on the materials, techniques and meaning of the green and red colours in medieval portuguese illuminations

Dissertação para obtenção do Grau de Doutor em Conservação e Restauro

Liver Depurative Techniques: A Single Liver Transplantation Center Experience

In a liver transplant (LT) center, treatments with Prometheus were evaluated. The main outcome considered was 1 and 6 months survival. Methods. During the study period, 74 patients underwent treatment with Prometheus; 64 were enrolled,with a mean age of 51 13 years; 47men underwent 212 treatments (mean, 3.02 per patient). The parameters evaluated were age, sex, laboratorial (liver enzymes, ammonia) and clinical (model for end-stage liver disease and Child-Turcotte-Pugh score) data. Results. Death was verified in 23 patients (35.9%) during the hospitalization period, 20 patients (31.3%) were submitted to liver transplantation, and 21 were discharged. LT was performed in 4 patients with acute liver failure (ALF, 23.7%), in 7 patients with acute on chronic liver failure (AoCLF, 43.7%), and in 6 patients with liver disease after LT (30%). Seven patients who underwent LT died (35%). In the multivariate analysis, older age (P ¼ .015), higher international normalized ratio (INR) (P ¼ .019), and acute liver failure (P ¼ .039) were independently associated with an adverse 1-month clinical outcome. On the other hand, older age (P ¼ .011) and acute kidney injury (P ¼ .031) at presentation were both related to worse 6-month outcome. For patients with ALF and AoCLF we did not observe the same differences. Conclusions. In this cohort, older age was the most important parameter defining 1- and 6-month survival, although higher INR and presence of ALF were important for 1-month survival and AKI for 6-month survival. No difference was observed between patients who underwent LT or did not have LT.

Recursive neuro fuzzy techniques for online identification and control

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Data fusion with computational intelligence techniques: a case study of fuzzy inference for terrain assessment

Dissertação apresentada para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Comparison of the thick smear and Kato-Katz techniques for diagnosis of intestinal helminth infections

This study compared the efficiency of Kato-Katz thick smear and thick smear techniques for the diagnosis of intestinal helminths. The sensitivity of the thick smear technique was higher than that of the Kato-Katz method for the diagnosis of all helminths except Schistosoma mansoni.

Diagnosing human asymptomatic visceral leishmaniasis in an urban area of the State of Minas Gerais, using serological and molecular biology techniques

A population-based cross-sectional study was set up in Sabará country, Southeastern Brazil, to identify asymptomatic human visceral leishmaniasis in an urban area of low disease prevalence. Blood was collected on filter paper (n=1,604 inhabitants) and examined by indirect immunofluorescent test, enzyme-linked immunosorbent assay and immunochromatographic strip test. The prevalence rates of infection ranged from 2.4 to 5.6% depending on the test used. One year later, venous blood was collected in a subset of 226 participants (102 seropositive and 124 seronegative). The tests performed were IFAT, ELISA, rk39-ELISA, polymerase chain reaction and hybridization with Leishmania donovani complex probe. No clinical signs or symptoms of leishmaniasis were observed. Using hybridization as a reference test, the sensitivity and specificity of serology were respectively: 24.8 and 71% (ELISA); 26.3 and 76.3% (rk-39); 30.1 and 63.4% (IFAT). Due to disagreements, different criteria were tested to define the infection and hybridization should be considered in epidemiological studies.