Heavy-metal pollution and remediation of forest soil around the Harjavalta Cu-Ni smelter, in SW Finland

Abstract

Movimentação de metais pesados em Latossolo adubado com composto de lixo urbano

Em experimento realizado no campo, nos anos agrícolas 1996/97 e 1997/98, em Latossolo Amarelo distrófico, cultivado com cana-de-açúcar, avaliou-se o efeito de aplicações sucessivas de composto de lixo urbano sobre a movimentação, em profundidade, dos metais Cd, Cr, Cu, Ni, Pb e zinco. No primeiro ano agrícola, além do tratamento testemunha, o composto de lixo foi aplicado nas doses de 20, 40 e 60 Mg ha-1 (base seca). No segundo ano, o composto foi reaplicado nas doses de 24, 48 e 72 Mg ha-1. Em relação aos metais Cd, Cr, Cu, Ni e Pb não se observou nenhuma evidência de movimentação ao longo do perfil do solo. O Zn apresentou mobilidade no solo, onde se verificou, ao final de 1997/98, incrementos significativos até a camada de 0,4-0,6 m de profundidade.

Extratores para avaliação da disponibilidade de metais pesados em solos adubados com vermicomposto de lixo urbano

Os objetivos deste trabalho foram selecionar extratores químicos para avaliação da disponibilidade de metais pesados em solos tratados com vermicomposto de lixo urbano e calcário, e verificar os efeitos destes insumos nos teores disponíveis de metais pesados em solos. Foram realizados dois ensaios em casa de vegetação. Em um deles, foi usado um Latossolo Vermelho distroférrico e, no outro, um Argissolo Vermelho-Amarelo eutrófico, e, em ambos, a alface foi utilizada como planta-teste. O delineamento experimental de cada experimento foi em blocos ao acaso, em esquema fatorial 5x5, com quatro repetições, combinando-se doses de corretivos da acidez para elevar a saturação por bases a 40%, 50%, 60%, 70% e 80%, e o equivalente a 0, 25, 50, 75 e 100 t ha-1 de vermicomposto. Os extratores DTPA e Mehlich 3 detectam aumento nos teores de Ni, Pb, Cu e Zn em solos argiloso e arenoso adubados com vermicomposto de lixo urbano. O DTPA é mais eficiente que os extratores Mehlich 1 e Mehlich 3 na avaliação das alterações nos teores disponíveis dos metais pesados provocadas pelas mudanças no pH no solo argiloso. O Mn é o único elemento cuja disponibilidade é avaliada eficientemente tanto no solo argiloso como no arenoso, pelo DTPA.

Ácidos orgânicos como extratores de metais pesados fitodisponíveis em solos tratados com lodo de esgoto

Ainda não foi desenvolvido um método de extração eficiente para estimar teores fitodisponíveis de metais pesados, porque os extratores utilizados não simulam reações semelhantes às que ocorrem próximo às raízes. O objetivo deste trabalho foi avaliar uma solução de ácidos orgânicos rizosféricos como extratora de teores fitodisponíveis de metais pesados presentes em solos tratados com lodo de esgoto. Os solos utilizados foram: Latossolo Amarelo distrófico, Neossolo Quartzarênico e Latossolo Vermelho distrófico, cultivados com plantas de banana, pupunha e café, respectivamente. A avaliação do extrator (solução composta por ácido acético, cítrico, lático e oxálico em concentrações de 1,00, 0,72, 0,49 e 0,12 mol L-1, respectivamente) foi feita a partir da análise da correlação entre teores de metais pesados (Cd, Cr, Cu, Ni, Pb e Zn) extraídos do solo e os teores nas plantas. As correlações foram significativas, indicando a eficiência do extrator para todos os casos estudados. Entre os metais avaliados, as quantidades extraídas de Pb correlacionaram-se melhor com teor fitodisponível nas três situações investigadas.

Determinação de cádmio, cobre, cromo, níquel, chumbo e zinco em fosfatos de rocha

A preocupação com metais pesados provenientes de fertilizantes minerais deve-se à possibilidade de entrada desses elementos na cadeia alimentar. O objetivo deste trabalho foi determinar o teor de metais pesados e comparar três métodos de extração (Embrapa, USEPA 3051A e USEPA 3050B) de Cd, Cr, Cu, Ni, Pb e Zn em fosfatos de rochas nacionais e importados. A quantificação dos teores desses elementos foi feita em espectrofotômetro de absorção atômica de chama ar-acetileno. Entre os fosfatos estudados, o termofosfato apresentou concentrações significativamente superiores de Cr, Cu, Ni e Zn e o fosfato natural 2, de Cu, Ni, Pb e Zn. O fosfato reativo 3 apresentou a maior quantidade de Cd (145±13 mg kg-1) e o fosfato natural 2, a maior quantidade de Pb (234±9 mg kg-1). Os métodos avaliados podem ser aplicados em estudos de teor de metais pesados em fertilizantes fosfatados.

Sentence de la prévôté de l'Hôtel qui fait défense au nommé Dominique Franky, opérateur de ne plus exercer ni faire exercer aucunes fonctions dans les villes royales du royaume

[Acte. 1753-10-02. Versailles]

Organic acids in the rhizosphere and phytoavailability of sewage sludge-borne trace elements

The aim of this work was to quantify low molecular weight organic acids in the rhizosphere of plants grown in a sewage sludge-treated media, and to assess the correlation between the release of the acids and the concentrations of trace-elements in the shoots of the plants. The species utilized in the experiment were cultivated in sand and sewage sludge-treated sand. The acetic, citric, lactic, and oxalic acids, were identified and quantified by high performance liquid chromatography in samples collected from a hydroponics system. Averages obtained from each treatment, concentration of trace elements in shoots and concentration of organic acids in the rhizosphere, were compared by Tukey test, at 5% of probability. Linear correlation analysis was applied to verify an association between the concentrations of organic acids and of trace elements. The average composition of organic acids for all plants was: 43.2, 31.1, 20.4 and 5.3% for acetic, citric, lactic, and oxalic acids, respectively. All organic acids evaluated, except for the citric acid, showed a close statistical agreement with the concentrations of Cd, Cu, Ni, and Zn found in the shoots. There is a positive relationship between organic acids present in the rhizosphere and trace element phytoavailability.

Pyhän maan suomalainen ääni?

Kirja-arvio

Avaliação de Trichogramma spp. para o controle de Trichoplusia ni

O objetivo deste trabalho foi avaliar as características biológicas dos parasitoides Trichogramma acacioi, T. atopovirilia, T. marandobai, T. demoraesi, T. exiguum (duas linhagens) e T. pretiosum (seis linhagens), criados em ovos de Trichoplusia ni. O experimento foi conduzido em delineamento inteiramente casualizado, com 15 repetições. As características biológicas avaliadas foram: parasitismo, viabilidade, razão sexual e número de indivíduos por ovo. A percentagem de parasitismo variou entre 7,66 e 53%, com maior valor observado para a linhagem Tspd de Trichogramma pretiosum, e o menor para a linhagem Trecife de T. pretiosum. Não houve diferença significativa dessa espécie quanto à viabilidade, que ficou acima de 85%. A razão sexual variou de 0,75 a 1, e a linhagem Tspd apresentou o menor valor. O número de parasitoides por ovo variou entre 2,39 para T. marandobai (linhagem Tm1) e 1,34 para T. exiguum (linhagem Te1). A espécie que apresentou o melhor desempenho em laboratório foi T. pretiosum (Tspd), com os maiores valores observados na percentagem de parasitismo e na emergência.

Genesis of the Jurassic carbonate-hosted Pb-Zn deposits of Jebel Ressas (North-eastern Tunisia): Evidence from mineralogy, petrography and trace metal contents and isotope (O, C, S, Pb) geochemistry

The Jebel Ressas Pb-Zn deposits in North-Eastern Tunisia occur mainly as open-space fillings (lodes, tectonic breccia cements) in bioclastic limestones of the Upper Jurassic Ressas Formation and along the contact of this formation with Triassic rocks. The galena-sphalerite association and their alteration products (cerussite, hemimorphite, hydrozincite) are set within a calcite gangue. The Triassic rocks exhibit enrichments in trace metals, namely Pb, Co and Cd enrichment in clays and Pb, Zn, Cd, Co and Cr enrichment in carbonates, suggesting that the Triassic rocks have interacted with the ore-bearing fluids associated with the Jebel Ressas Pb-Zn deposits. The delta(18)O content of calcite associated with the Pb-Zn mineralization suggests that it is likely to have precipitated from a fluid that was in equilibrium with the Triassic dolostones. The delta(34)S values in galenas from the Pb-Zn deposits range from -1.5 to +11.4%, with an average of 5.9% and standard deviation of 3.9%. These data imply mixing of thermochemically-reduced heavy sulfur carried in geothermal- and fault-stress-driven deep-seated source fluid with bacterially-reduced light sulfur carried in topography-driven meteoric fluid. Lead isotope ratios in galenas from the Pb-Zn deposits are homogenous and indicate a single upper crustal source of base-metals for these deposits. Synthesis of the geochemical data with geological data suggests that the base-metal mineralization at Jebel Ressas was formed during the Serravallian-Tortonian (or Middle-Late Miocene) Alpine compressional tectonics.

Leikintutkimus ja lasten ääni

Kirja-arvio

Atomic Ordering and Martensitic Transitions in Cu-Zn-Al Shape Memory Alloys

We present results from both, calorimetric and dilatometric studies of the isothermal ordering process taking place in a Cu-Zn-Al shape memory alloy after quenches from Tq temperatures ranging from 350 K to 1200 K. The dissipated energy and the length variations of the system are obtained during the process. The change of these quantities in the whole process have been compared with the difference [MATH] between Ms, measured after the relaxation and Ms measured just after the quench. We obtain that these three quantities present, as a function of Tq, the same qualitative behaviour. These changes are then associated with changes of the L21 ordering after the quench in the system. The relaxational process does not follow a single exponential decay. Instead, a continuous slowing down is observed. A relaxation time [MATH] has been defined to characterize the relaxation rate. We show that [MATH] depends on both the annealing and the quenching (Tq [MATH] 800 K) temperatures through an Arrhenius law.

Mineral zoning and geochemistry of epithermal polymetallic Zn-Pb-Ag-Cu-Bi mineralization at Cerro de Pasco, Peru

The large Cerro de Pasco Cordilleran base metal deposit in central Peru is located on the eastern margin of a middle Miocene diatreme-dome complex and comprises two mineralization stages. The first stage consists of a large pyrite-quartz body replacing Lower Mesozoic Pucara carbonate rocks and, to a lesser extent, diatreme breccia. This body is composed of pyrite with pyrrhotite inclusions, quartz, and black and red chalcedony (containing hypogene hematite). At the contact with the pyrite-quartz body, the diatreme breccia is altered to pyrite-quartz-sericite-pyrite. This body was, in part, replaced by pipelike pyrrhotite bodies zoned outward to carbonate-replacement Zn-Pb ores hearing Fe-rich sphalerite (up to 24 mol % Fes). The second mineralization stage is partly superimposed on the first and consists of zoned east-west-trending Cu-Ag-(Au-Zn-Pb) enargite-pyrite veins hosted in the diatreme breccia in the western part of the deposit and well-zoned Zn-Pb-(Bi-Ag-Cu) carbonate-replacement orebodies; in both cases, sphalerite is Fe poor and the inner parts of the orebodies show typically advanced argillic alteration assemblages, including aluminum phosphate Sulfate (APS) minerals. The zoned enargite-pyrite veins display mineral zoning, from a core of enargite-pyrite +/- alunite with traces of Au, through an intermediate zone of tennantite, chalcopyrite, and Bi minerals to a poorly developed Outer zone hearing sphalerite-galena +/- kaolinite. The carbonate-hosted replacement ores are controlled along N 35 degrees E, N 90 degrees E, N 120 degrees E, and N 170 degrees E faults. They form well-zoned upward-flaring pipelike orebodies with a core of famatinite-pyrite and alunite, an intermediate zone with tetrahedrite-pyrite, chalcopyrite, matildite, cuprobismutite, emplectite, and other Bi minerals accompanied by APS minerals, kaolinite, and dickite, and an outer zone composed of Fe-poor sphalerite (in the range of 0.05-3.5 mol % Fes) and galena. The outermost zone consists of hematite, magnetite, and Fe-Mn-Zn-Ca-Mg carbonates. Most of the second-stage carbonate-replacement orebodies plunge between 25 degrees and 60 degrees to the west, suggesting that the hydrothermal fluids ascended from deeper levels and that no lateral feeding from the veins to the carbonate-replacement orebodies took place. In the Venencocha and Santa Rosa areas, located 2.5 km northwest of the Cerro de Pasco open pit and in the southern part of the deposit, respectively, advanced argillic altered dacitic domes and oxidized veins with advanced argillic alteration halos occur. The latter veins are possibly the oxidized equivalent of the second-stage enargite-pyrite veins located in the western part of the deposit. The alteration assemblage quartz-muscovite-pyrite associated with the pyrite-quartz body suggests that the first stage precipitated at slightly, acidic fin. The sulfide mineral assemblages define an evolutionary path close to the pyrite-pyrrhotite boundary and are characteristic of low-sulfidation states; they suggest that the oxidizing slightly acidic hydrothermal fluid was buffered by phyllite, shale, and carbonate host rock. However, the presence in the pyrite-quartz body of hematite within quartz suggests that, locally, the fluids were less buffered by the host rock. The mineral assemblages of the second mineralization stage are characteristic of high- to intermediate-sulfidation states. High-sulfidation states and oxidizing conditions were achieved and maintained in the cores of the second-stage orebodies, even in those replacing carbonate rocks. The observation that, in places, second-stage mineral assemblages are found in the inner and outer zones is explained in terms of the hydrothermal fluid advancing and waning. Microthermometric data from fluid inclusions in quartz indicate that the different ores of the first mineralization stage formed at similar temperatures and moderate salinities (200 degrees-275 degrees C and 0.2-6.8 wt % NaCl equiv in the pyrite-quartz body; 192 degrees-250 degrees C and 1.1-4.3 wt % NaCl equiv in the pyrrhotite bodies; and 183 degrees-212 degrees C and 3.2-4.0 wt % NaCl equiv in the Zn-Pb ores). These values are similar to those obtained for fluid inclusions in quartz and sphalerite from the second-stage ores (187 degrees-293 degrees C and 0.2-5.2 wt % NaCl equiv in the enargite-pyrite veins: 178 degrees-265 degrees C and 0.2-7.5 wt % NaCl equiv in quartz of carbonate-replacement orebodies; 168 degrees-999 degrees C and 3-11.8 wt % NaCl equiv in sphalerite of carbonate-replacement orebodies; and 245 degrees-261 degrees C and 3.2-7.7 wt % NaCl equiv in quartz from Venencocha). Oxygen and hydrogen isotope compositions oil kaolinite from carbonate-replacement orebodies (delta(18)O = 5.3-11.5%o, delta D = -82 to -114%o) and on alunite from the Venencocha and Santa Rosa areas (delta(18)O = 1.9-6.9%o, delta D = -56 to -73%o). Oxygen isotope compositions of quartz from the first and second stages have 6180 values from 9.1 to 1.7.8 per mil. Calculated fluids in equilibrium with kaolinite have delta(18)O values of 2.0 to 8.2 and delta D values of -69 to -97 per mil; values in equilibrium with alunite are -1.4 to -6.4 and -62 to -79 per mil. Sulfur isotope compositions of sulfides from both stages have a narrow range of delta(34)S values, between -3.7 and +4.2 per mil; values for sulfates from the second stage are between 4.2 and 31.2 per mil. These results define two mixing trends for the ore-forming fluids. The first trend reflects mixing between a moderately saline (similar to 10 wt % NaCl equiv) magmatic end member that had degassed (as indicated by the low delta D values) and meteoric water. The second mixing indicates condensation of magmatic vapor with HCl and SO(2) into meteoric water, which formed alunite. The hydrothermal system at Cerro de Pasco was emplaced at a shallow depth (similar to 500 m) in the epithermal and upper part of a porphyry environment. The similar temperatures and salinities obtained for the first stage and second stages, together with the stable isotope data, indicate that both stages are linked and represent successive stages of epithermal polymetallic mineralization in the upper part of a porphyry system.

Systematic study of the temperature dependence of the saturation magnetization in Fe, Fe-Ni and Co-based amorphous alloys

Magnetization versus temperature in the temperature interval 2-200 K was measured for amorphous alloys of three different compositions: Fe 81.5B14.5Si4, Fe40Ni38 Mo4B18, and Co70Fe5Ni 2Mo3B5Si15. The measurements were performed by means of a SQUID (superconducting quantum interference device) magnetometer. The aim was to extract information about the different mechanisms contributing to thermal demagnetization. A powerful data analysis technique based on successive minimization procedures has demonstrated that Stoner excitations of the strong ferromagnetic type play a significant role in the Fe-Ni alloy studied. The Fe-rich and Co-rich alloys do not show a measurable contribution from single-particle excitations.