Reducing Browning of Fresh-cut ‘Maha’ Carambola with Chemical Additives and Low-oxygen Atmospheres

The greatest attraction to using carambola (Averrhoa carambola L.) in the fresh-cut market is the star shape that the fruit presents after a transverse cut. Carambola is well-suited for minimal processing, but cut surface browning is a main cause of deterioration. This problem is exacerbated as a result of mechanical injuries occurring during processing and is mainly induced by the leakage of phenolic compounds from the vacuole and subsequent oxidation by polyphenol oxidase (PPO) (Augustin et al., 1985). The use of browning inhibitors in processed fruits is restricted to compounds that are non-toxic, ‘wholesome’, and that do not adversely affect taste and flavour (Gil et al., 1998). In the past, browning was mainly controlled by the action of sulphites, but the use of this compound has declined due to allergic reactions in asthmatics (Weller et al., 1995). The shelf life of fresh-cut products may be extended by a combination of oxygen exclusion and the use of enzymatic browning inhibitors. The objectives of this work were to determine the effects of: (1) post-cutting chemical treatments of ascorbic, citric, oxalic acids, and EDTA-Ca; (2) atmospheric modification; and (3) combinations of the above, on the shelf life of carambola slices based on appearance, colour and polyphenol oxidase activity

Cultivar affects browning susceptibility of freshly cut star fruit slices

Consumption of freshly-cut horticultural products has increased in the last few years. The principal restraint to using freshly-cut carambola is its susceptibility to tissue-browning, due to polyphenol oxidase-mediated oxidation of phenolic compounds present in the tissue. The current study investigated the susceptibility to browning of star fruit slices (Averrhoa carambola L.) of seven genotypes (Hart, Golden Star, Taen-ma, Nota-10, Malasia, Arkin, and Fwang Tung). Cultivar susceptibility to browning as measured by luminosity (L*) varied significantly among genotypes. Without catechol 0.05 M, little changes occurred on cut surface of any cultivars during 6 hour at 25 degrees C, 67% RH. Addition of catechol led to rapid browning, which was more intense in cvs. Taen-ma, Fwang Tung, and Golden Star, with reduction in L* value of 28.60%, 27.68%, and 23.29%, respectively. Browning was more intense in the center of the slices, particularly when treated with catechol, indicating highest polyphenol oxidase (PPO) concentration. Epidermal browning, even in absence of catechol, is a limitation to visual acceptability and indicates a necessity for its control during carambola processing. Care must be given to appropriate selection of cultivars for fresh-cut processing, since cultivar varied in browning susceptibility in the presence of catechol.

Response of minimally processed carambola to chemical treatments and low-oxygen atmospheres

Fresh-cut carambola (Averrhoa carambola L.) has limited marketability due to cut-surface browning. The effect of chemical treatments (ascorbic acid, citric acid and Ca-EDTA), controlled atmosphere (0.4-20.3% O2) and the association of these processes was investigated. Post-cutting dip and low-oxygen atmospheres did not prevent discoloration or improve sensory and physicochemical parameters. However, ascorbic acid (0.5% and 1%) dips reduced polyphenol oxidase (PPO) activity during storage at 4.5 °C, with 1% ascorbic acid inducing the lowest activity. Although cut-surface browning of 'Maha' slices was not relevant, carambola slices treated with 1% ascorbic acid in association with 0.4% oxygen did not present significant browning or loss of visual quality for up to 12 days, 3 days longer than low oxygen alone (0.4% O2), thus, their quality can be significantly improved by combining both treatments.

Australian innovation ecosystem: A critical review of the national innovation support mechanisms

Innovation is understood as the combination of existing ideas or the generation of new ideas into new processes, products and services, and widely viewed as the main driver of growth in contemporary economies. In the age of the knowledge economy, successful economic development is intimately linked to a country’s capacity to generate, acquire, absorb, disseminate, and apply innovation towards advanced technology products and services. This development approach is labelled as knowledge-based economic development and highly associated with a capacity embodied in a country’s national innovation ecosystem. The research reported in this paper aims to critically review the Australian innovation ecosystem in order to provide a better understanding on the potential impacts of policy and support mechanisms on the innovation and knowledge generation capacity. The investigation places Australia’s innovation system and national-level innovation support mechanisms under the microscope. The methodology of the study is twofold. Firstly, it undertakes a critical review of the literature and government policy documents to better understand the innovation policy and support mechanisms in the country. It, then, conducts a survey to capture Australian innovation companies’ perceptions on the role and effectiveness of the existing innovation incentive programs. The paper concludes with a discussion on the key insights and findings and potential policy and support directions of the country to achieve a flourishing knowledge economy.

Multivariate analysis of fresh-cut carambola slices stored under different temperatures.

Quality of fresh-cut carambola (Averrhoa carambola L) is related to many chemical and biochemical variables especially those involved with softening and browning, both influenced by storage temperature. To study these effects, a multivariate analysis was used to evaluate slices packaged in vacuum-sealed polyolefin bags, and stored at 2.5 degrees C, 5 degrees C and 10 degrees C, for up to 16 d. The quality of slices at each temperature was correlated with the duration of storage, O(2) and CO(2) concentration in the package, physical chemical constituents, and activity of enzymes involved in softening (PG) and browning (PPO) metabolism. Three quality groups were identified by hierarchical cluster analysis, and the classification of the components within each of these groups was obtained from a principal component analysis (PCA). The characterization of samples by PCA clearly distinguished acceptable and non-acceptable slices. According to PCA, acceptable slices presented higher ascorbic acid content, greater hue angles ((o)h) and final lightness (L-5) in the first principal component (PC1). On the other hand, non-acceptable slices presented higher total pectin content. PPO activity in the PC1. Non-acceptable slices also presented higher soluble pectin content, increased pectin solubilisation and higher CO(2) concentration in the second principal component (PC2) whereas acceptable slices showed lower total sugar content. The hierarchical cluster and PCA analyses were useful for discriminating the quality of slices stored at different temperatures.

Fungal Planet description sheets: 128-153

Novel species of microfungi described in the present study include the following from Australia: Catenulostroma corymbiae from Corymbia, Devriesia stirlingiae from Stirlingia, Penidiella carpentariae from Carpentaria, Phaeococcomyces eucalypti from Eucalyptus, Phialophora livistonae from Livistona, Phyllosticta aristolochiicola from Aristolochia, Clitopilus austroprunulus on sclerophyll forest litter of Eucalyptus regnans and Toxicocladosporium posoqueriae from Posoqueria. Several species are also described from South Africa, namely: Ceramothyrium podocarpi from Podocarpus, Cercospora chrysanthemoides from Chrysanthemoides, Devriesia shakazului from Aloe, Penidiella drakensbergensis from Protea, Strelitziana cliviae from Clivia and Zasmidium syzygii from Syzygium. Other species include Bipolaris microstegii from Microstegium and Synchaetomella acerina from Acer (USA), Brunneiapiospora austropalmicola from Rhopalostylis (New Zealand), Calonectria pentaseptata from Eucalyptus and Macadamia (Vietnam), Ceramothyrium melastoma from Melastoma (Indonesia), Collembolispora aristata from stream foam (Czech Republic), Devriesia imbrexigena from glazed decorative tiles (Portugal), Microcyclospora rhoicola from Rhus (Canada), Seiridium phylicae from Phylica (Tristan de Cunha, Inaccessible Island), Passalora lobeliaefistulosis from Lobelia (Brazil) and Zymoseptoria verkleyi from Poa (The Netherlands). Valsalnicola represents a new ascomycete genus from Alnus (Austria) and Parapenidiella a new hyphomycete genus from Eucalyptus (Australia). Morphological and culture characteristics along with ITS DNA barcodes are also provided. © 2012 Nationaal Herbarium Nederland & Centraalbureau voor Schimmelcultures.

Biocontrol of Chromolaena odorata in Timor Leste

Chromolaena odorata (L.) King and Robinson (Asteraceae) is a major weed in Timor Leste, affecting grazing lands and subsistence farms, reducing productivity and food security. It was the focus of a biocontrol project funded by the Australian Government from 2005-2009. During this period, the gall fly Cecidochares connexa (Macquart) (Diptera: Tephritidae) was introduced from Papua New Guinea and Indonesia, where it is widespread. From these initial releases, the gall fly established at seven sites and was subsequently re-distributed to most areas in Timor Leste where chromolaena was a problem. It established at most of the release sites that were revisited and caused a visible reduction in plant density and height. Overall, control of chromolaena by the gall fly in Timor Leste is limited by the severe dry season and the widespread use of fire in clearing lands for agriculture, both of which reduce the ability of gall fly populations to persist at damaging levels. Thus additional agents that can tolerate prolonged dry periods are required to increase the level of control of chromolaena.

Simulation-driven design of helmets for head impact protection using an injury-based criterion

The current paper suggests a new procedure for designing helmets for head impact protection for users such as motorcycle riders. According to the approach followed here, a helmet is mounted on a featureless Hybrid 3 headform that is used in assessing vehicles for compliance to the FMVSS 201 regulation in the USA for upper interior head impact safety. The requirement adopted in the latter standard, i.e. not exceeding a threshold HIC(d) limit of 1000, is applied in the present study as a likely criterion for adjudging the efficacy of helmets. An impact velocity of 6 m/s (13.5 mph) for the helmet-headform system striking a rigid target can probably be acceptable for ascertaining a helmet's effectiveness as a countermeasure for minimizing the risk of severe head injury. The proposed procedure is demonstrated with the help of a validated LS-DYNA model of a featureless Hybrid 3 headform in conjunction with a helmet model comprising an outer polypropylene shell to the inner surface of which is bonded a protective polyurethane foam padding of a given thickness. Based on simulation results of impact on a rigid surface, it appears that a minimum foam padding thickness of 40 mm is necessary for obtaining an acceptable value of HIC(d).

Spin-Electron-Phonon Excitation in Re-based Half-Metallic Double Perovskites

A remarkable hardening (similar to 30 cm(-1)) of the normal mode of vibration associated with the symmetric stretching of the oxygen octahedra for the Ba2FeReO6 and Sr2CrReO6 double perovskites is observed below the corresponding magnetic ordering temperatures. The very large magnitude of this effect and its absence for the antisymmetric stretching mode provide evidence against a conventional spin-phonon coupling mechanism. Our observations are consistent with a collective excitation formed by the combination of the vibrational mode with oscillations of Fe or Cr 3d and Re 5d occupations and spin magnitudes.

Low-density three-dimensional foam using self-reinforced hybrid two-dimensional atomic layers

Low-density nanostructured foams are often limited in applications due to their low mechanical and thermal stabilities. Here we report an approach of building the structural units of three-dimensional (3D) foams using hybrid two-dimensional (2D) atomic layers made of stacked graphene oxide layers reinforced with conformal hexagonal boron nitride (h-BN) platelets. The ultra-low density (1/400 times density of graphite) 3D porous structures are scalably synthesized using solution processing method. A layered 3D foam structure forms due to presence of h-BN and significant improvements in the mechanical properties are observed for the hybrid foam structures, over a range of temperatures, compared with pristine graphene oxide or reduced graphene oxide foams. It is found that domains of h-BN layers on the graphene oxide framework help to reinforce the 2D structural units, providing the observed improvement in mechanical integrity of the 3D foam structure.

An estimate of the number of tropical tree species

The high species richness of tropical forests has long been recognized, yet there remains substantial uncertainty regarding the actual number of tropical tree species. Using a pantropical tree inventory database from closed canopy forests, consisting of 657,630 trees belonging to 11,371 species, we use a fitted value of Fisher's alpha and an approximate pantropical stem total to estimate the minimum number of tropical forest tree species to fall between similar to 40,000 and similar to 53,000, i.e., at the high end of previous estimates. Contrary to common assumption, the Indo-Pacific region was found to be as species-rich as the Neotropics, with both regions having a minimum of similar to 19,000-25,000 tree species. Continental Africa is relatively depauperate with a minimum of similar to 4,500-6,000 tree species. Very few species are shared among the African, American, and the Indo-Pacific regions. We provide a methodological framework for estimating species richness in trees that may help refine species richness estimates of tree-dependent taxa.

Estimación de la prevalencia e intensidad de parásitos internos y externos en la Tilapia (Oreochromis nitoticus) en la granja piscícola UNA-ADPESCA, Managua, Nicaragua

El presente trabajo investigativo tiene como objetivo identificar los parásitos internos y externos de la tilapia (Oreochromis niloticus). Esta investigación se llevó a cabo en la Granja Piscícola UNA-ADPESCA, ubicada en las instalaciones de la Universidad Nacional Agraria en el kilómetro 12 ½ Carretera Norte en el Departamento de Managua. Se realizaron varios muestreos en donde se seleccionaron cuatro estanques destinados a cultivo de peces de estadio juvenil donde se escogieron peces al azar para su correspondiente estudio a nivel de laboratorio. Se utilizó un modelo estadístico descriptivo, con el cual se evaluaron las variables de prevalencia, e intensidad del parásito monogéneo y la talla de la tilapia en los meses de Marzo, Abril, Mayo y Jimio del 2.000. El parásito identificado fue el monogéneo (Cichlidogyrus sclerosus) alojado en las branquias de las tilapias. La prevalencia del parásito encontrado en la tilapia, resultó ser mayor en el mes de Mayo debido a que en este mes en la granja existió una sobrepoblación en los estanques de cultivo y esto permitió que mayor cantidad de peces fueran parasitados. La intensidad fue más alta en los meses de Mayo y Junio donde se prestaron las condiciones más favorables para que una cantidad determinada de una misma especie de parásito afectara a los peces, la presencia de estos parásitos en el cultivo de peces fue por el grado de contaminación de la fuente abastecedora de agua y la acción de los depredadores que se encargaron de propagar a los patógenos. En el mes de Junio se trabajó con peces de tallas superiores a los meses de Marzo, Abril y Mayo, esto demostró que peces de gran talla son menos resistentes a la presencia de los parásitos y son susceptibles a una infestación. Las medidas preventivas sanitario profilácticas empleadas en la granja piscícola UNA-ADPESCA demostraron ser eficientes en el control de éstos parásitos, permitiendo así producir peces de buen peso, vigorosos y saludables.

Estudio epidemiológico de la prevalencia de mastitis subclínica en el departamento de Juigalpa, Chontales

La mastitis se refiere a la inflamación de la glándula mamaria, causado por varios factores destacándose entre ellos, los físicos, mecánicos e infecciosos. Se caracteriza por las alteraciones físicas, químicas y bacteriológicas de la leche, también por modificaciones patológicas del tejido glándular. Con el objetivo de determinar la prevalencia en Juigalpa, Chontales, se desarrolló un "ESTUDIO EPIDEMIOLOGICO SOBRE LA PREVALENCIA DE MASTITIS SUBCLINICA EN EL 100 % DE LAS VACAS EN ORDEÑO, EN 9 UNIDADES DE PRODUCCION UBICADAS EN JUIGALPA, CHONTALES." por lo que se realizó un diagnostico a 2115 vacas, para nuestro estudio epidemiológico utilizamos el método de diagnóstico California Mastitis Test. Los resultados obtenidos revelan una prevalencia global de 34%, siendo de esta mastitis clínica 5.01% y una subclínica de 29.26% en nuestro estudio también aportamos la importancia del uso de medidas higiénicas, números de partos, mes del año son variables en el surgimiento de la mastitis subclínica por lo que en la zona donde realizamos nuestra investigación se considera una afectada por mastitis. Por lo que recomendamos establecer programas de vigilancia y control permanente de la mastitis subclínica en cada unidad de producción.

Determinación del período crítico de competencia de malezas en el cultivo del ajonjolí (Sesamun indicum L.) variedad Cuyumaqui

El presente trabajo se planificó con la finalidad de determinar el período critico de competencia de malezas sobre el rendimiento del cultivo del ajonjolí (Sesamum indicum L.) variedad Cuyumaqui. para lo cual se incluyeron tratamientos enmalezados hasta, y limpios hasta (15, 30, 45, 60, 75 y 100 días después de la germinación respectivamente) bajo las condiciones ecológicas de la finca La Concepción, Nagarote León. El ensayo se estableció en la siembra de postrera de 1999 (2 de septiembre al 12 de diciembre). utilizándose un diseño de bloques completos al azar con cuatro repeticiones. El resultado estadístico realizado a la variable de rendimiento mostró diferencias significativas entre tratamientos, alcanzándose los mayores rendimientos en los tratamientos T10 (limpio hasta los 60 dds el tiempo limpio) con 1 121.3 kg./ha, T11 (limpio hasta los 75 dds) con 1 124.2 y el T12 (todo el tiempo limpio) con 1 131.3 kg./ha de grano respectivamente y sin diferencias estadísticas entre los mismos, y los rendimientos más bajos se alcanzaron en el T6 (enmalezado los 100 días) con 388.8 kg/ha y T7 (1impio hasta los 15 días) con 435.1 kglha . Así mismo, se llegó a la conclusión de que el período crítico de competencia de maleza para el cultivo del ajonjolí (variedad Cuyumaqui) se ubica a partir de los 15 hasta los 60 días después de la siembra.