Sources and transport pathways of common heavy metals to urban road surfaces

Heavy metals that are built-up on urban impervious surfaces such as roads are transported to urban water resources through stormwater runoff. Therefore, it is essential to understand the predominant pathways of heavy metals to the build-up on roads in order to develop suitable pollution mitigation strategies to protect the receiving water environment. The study presented in this paper investigated the sources and transport pathways of manganese, lead, copper, zinc and chromium, which are heavy metals commonly present in urban road build-up. It was found that manganese and lead are contributed to road build-up primarily by direct deposition due to the re-suspension of roadside soil by wind turbulence, while traffic is the predominant source of copper, zinc and chromium to the atmosphere and road build-up. Atmospheric deposition is also the major transport pathway for copper and zinc, and for chromium, direct deposition by traffic sources is the predominant pathway.

Vision-based operations of a large industrial vehicle : autonomous hot metal carrier

Hot metal carriers (HMCs) are large forklift-type vehicles used to move molten metal in aluminum smelters. This paper reports on field experiments that demonstrate that HMCs can operate autonomously and in particular can use vision as a primary sensor to locate the load of aluminum. We present our complete system but focus on the vision system elements and also detail experiments demonstrating reliable operation of the materials handling task. Two key experiments are described, lasting 2 and 5 h, in which the HMC traveled 15 km in total and handled the load 80 times.

Effect of nano-silica on the mechanical and transport properties of lightweight concrete

This paper investigated the influence of nano-silica (NS) on the mechanical and transport properties of lightweight concrete (LWC). The resistance of LWC to water and chloride ions penetration was enhanced despite strength marginally increased. Water penetration depth, moisture sorptivity, chloride migration and diffusion coefficient was reduced by 23% and 49%, 23% and 10%, 5% and 0%, 22% and 12% compared to the two reference LWC mixes (pure cement and 60% slag blended cement), respectively with 1% NS. Such improvements were attributed to more compact microstructures because the micropore system was refined and the interface between aggregates and paste was enhanced.

Liquid metal/metal oxide frameworks with incorporated Ga2O3 for photocatalysis

Solvothermally synthesized Ga2O3 nanoparticles are incorporated into liquid metal/metal oxide (LM/MO) frameworks in order to form enhanced photocatalytic systems. The LM/MO frameworks, both with and without incorporated Ga2O3 nanoparticles, show photocatalytic activitydue to a plasmonic effect where performance is related to the loading of Ga2O3 nanoparticles. Optimum photocatalytic efficiency is obtained with 1 wt% incorporation of Ga2O3 nanoparticles. This can be attributed to the sub-bandgap states of LM/MO frameworks, contributing to pseudo-ohmic contacts which reduce the free carrier injection barrier to Ga2O3.

Autonomous hot metal carrier: Navigation and manipulation with a 20 tonne industrial vehicle

This paper reports work on the automation of a hot metal carrier, which is a 20 tonne forklift-type vehicle used to move molten metal in aluminium smelters. To achieve efficient vehicle operation, issues of autonomous navigation and materials handling must be addressed. We present our complete system and experiments demonstrating reliable operation. One of the most significant experiments was five-hours of continuous operation where the vehicle travelled over 8 km and conducted 60 load handling operations. Finally, an experiment where the vehicle and autonomous operation were supervised from the other side of the world via a satellite phone network are described.

Book Review: "Metal Rules the Globe: Heavy Metal Music around the World". Durham, NC: Duke University Press.

It is rare to find an anthology that realizes the possibilities of the form. We tend to regard our edited collections as lesser siblings, and forget their special value. But at times, a subject seems to require an edited collection much more than it does a classic monograph. So it is with the subject showcased here, which concerns the global circulation, performance and consumption of heavy metal. This is a relatively new and emerging body of work, hitherto scattered disparately in the broader popular music studies, but quickly gaining status as a “studies” with the establishment of a global conference, a journal, and publication of this anthology, all in recent years. Metal Rules the Globe took the editors’ a decade to compile. That they have thought deeply about how they want the collection to speak shows through in the book’s thoughtful arrangement and design, and in the way in which they draw on the contributions herein to develop for the field a research agenda that will take it forward...

Outcome evaluation framework for the Queensland Alcohol Ignition Interlock Program. Report to Queensland Department of Transport and Main Roads (TMR 3814)

The Queensland Department of Transport and Main Roads (TMR) required an evaluation framework for the Queensland Alcohol Ignition Interlock Program (AIIP). The objective of this project was to develop a framework to evaluate the AIIP in terms of its effect on road safety outcomes.

Autonomous hot metal carrier

This paper reports work involved with the automation of a Hot Metal Carrier — a 20 tonne forklift-type vehicle used to move molten metal in aluminium smelters. To achieve efficient vehicle operation, issues of autonomous navigation and materials handling must be addressed. We present our complete system and experiments demontrating reliable operation. One of the most significant experiments was five-hours of continuous operation where the vehicle travelled over 8 km and conducted 60 load handling operations. We also describe an experiment where the vehicle and autonomous operation were supervised from the other side of the world via a satellite phone network.

Crash involvement patterns of unlicensed drivers and riders in Queensland. Report to Queensland Department of Transport and Main Roads

Unlicensed driving remains a serious problem for road safety, despite ongoing improvements in traffic law enforcement practices and technology. While it does not play a direct causative role in road crashes, unlicensed driving undermines the integrity of the driver licensing system and is associated with a range of high-risk behaviours. This report examines official road crash data from Queensland for the years 2003-08 to compare the crash involvement patterns of unlicensed drivers with those of licensed drivers and explore the scope and nature of unlicensed driving. This study replicates and extends upon two previous studies examining the involvement of unlicensed drivers in crashes in Queensland (Watson, 2004a; 2004b; Watson & Steinhardt, 2006).

Estimating the prevalence of unregistered driving in Queensland. Report to Queensland Department of Transport and Main Roads

A state-wide observational study was undertaken by the Centre for Accident Research and Road Safety – Queensland (CARRS-Q) in order to investigate the prevalence of unregistered vehicles on Queensland roads. This study was conducted on behalf of the Queensland department of Transport and Main Roads (TMR). This study builds upon research commissioned by Queensland Transport and conducted in 2000, 2003 and 2005. Vehicles were observed throughout Queensland from April 13th, 2010 to May 8th, 2010 in a mix of small rural towns, regional centres and metropolitan locations. The locations sampled for this study were restricted to destinations (e.g. shopping centres, hospitals, airports and park-and-ride facilities) rather than residential areas, and a variety of different destinations were sampled. Sampling vehicles in these types of locations provides a higher probability that the vehicles captured in the survey are being driven on a regular basis (Younglove, et al. 2004).

Links between unlicensed and unregistered driving: Literature review. Report to Queensland Department of Transport and Main Roads

Vehicle registration represents an important component of the management of the road transport system in Queensland, with most vehicles required to be registered before they can be driven or parked on a public road (Department of Transport and Main Roads, 2010b). In addition to the collection of taxes for road construction and maintenance, the current registration system also: • Sets the safety standards required for vehicles to be allowed on public roads; • Allows driver behaviour to be managed by identifying vehicles, and the responsible owners of vehicles, for enforcement purposes; and • Facilitates the collection of insurance premiums for the Queensland Compulsory Third Party (CTP) insurance scheme.

A comparison of methods to estimate the extent of unlicensed driving: Literature review. Final report to Queensland Transport

Unlicensed driving is a serious problem in many countries, despite ongoing improvements in traffic law enforcement practices and technology. The term ‘unlicensed driver' is generally used to refer to people who operate a motor vehicle or motorcycle without a valid driver's licence, including those who: • have let their licence expire; • have been disqualified or suspended from driving; • hold an inappropriate class of licence for the vehicle they drive; • drive outside the restrictions of a special licence; • don’t currently hold a licence; or • have never held a licence.

Final report : Estimating the extent of unlicensed driving: Roadside licence check survey - Wave2. Report to Queensland Department of Transport and Main Roads

This report documents a second, revised roadside licence check survey undertaken by the Queensland Police Service (QPS) in conjunction with roadside random breath testing (RBT) traffic operations. The methodology utilised was devised by the Centre for Accident Research and Road Safety – Queensland (CARRS-Q), Transport and Main Roads (TMR) and QPS, after consideration of a number of options.

An examination of the factors contributing to unlicensed driving. Report to Queensland Department of Transport and Main Roads

Unlicensed driving is a serious problem in many countries, despite ongoing improvements in traffic law enforcement practices and technology. Unlike alcohol impairment and speeding, unlicensed driving does not play a direct causative role in road crashes. However it represents a major problem for road safety in two respects. Firstly, it undermines the effectiveness of driver licensing systems by preventing the allocation of demerit points and reducing the impact of licence loss (Watson, 2004b). Secondly, there is a growing body of evidence linking unlicensed driving to a cluster of high-risk behaviours including drink driving, speeding, failure to wear seat belts and motorcycle use (Griffin & DeLaZerda, 2000; Harrison, 1997; Watson, 1997, 2004b). Consistent with this, utilising the quasi-induced exposure method, Watson (2004a) estimated that in Queensland, unlicensed drivers were almost three times more likely to be involved in a reported crash than licensed drivers.

Profiling unlicensed drivers and riders in Queensland. Report to Queensland Department of Transport and Main Roads

Unlicensed driving remains a serious problem for road safety, despite ongoing improvements in traffic law enforcement practices and technology. This report examines de-identified traffic infringement and sanction histories for drivers in Queensland who had lost their licence between 1st January 2003 and 31st December 2008. A total of 546,117 Queensland drivers were identified. Key areas discussed include the prevalence of unlicensed driving and the extent to which particular offences were detected amongst drivers with a licence sanction or disqualified licence.