Model to design drip hose lateral line using two spacing between emitters

The use of non-pressure compensating drip hose in horticultural and annual cycle fruits is growing in Brazil. In this case, the challenge for designers is getting longer lateral lines with high values of uniformity. The objective of this study was to develop a model to design longer lateral lines using non-pressure compensating drip hose. Using the developed model, the hypotheses to be evaluated were: a) the use of two different spacing between emitters in the same lateral line allows longer length; b) it is possible to get longer lateral lines using high values of pressure variation in the lateral lines since the distribution uniformity stays below allowable limits. A computer program was developed in Delphi based on the model developed and it is able to design lateral lines in level using non-pressure compensating drip hose. The input data are: desired distribution uniformity (DU); initial and final pressure in the lateral line; coefficients of relationship between emitter discharge and pressure head; hose internal diameter; pipe cross-sectional area with the dripper; and roughness coefficient for the Hazen-Williams equation. The program allows calculate the lateral line length with three possibilities: selecting two spacing between emitters and defining the exchange point; using two pre-established spacing between emitters and calculating the length of each section with different spacing; using one emitter spacing. Results showed that the use of two sections with different spacing between drippers in the lateral line didn't allow longer length but got better uniformity when compared with lateral line with one spacing between emitters. The adoption of two spacing increased the flow rate per meter in the final section which represented approximately 80% of the lateral line total length and this justifies their use. The software allowed DU above 90% with pressure head variation of 40% and the use of two spacing between emitters. The developed model/software showed to be accurate, easy to handle and useful for lateral line design using non-pressure compensating drip hose.

Pulp fruit added to culture medium for in vitro orchid development

As an additive in in vitro culture media, fruits have a great potential for facilitating economical orchid production because of lower technology requirements and the ease of obtaining raw materials to formulate culture media. We studied the in vitro growth of Cattleya bicolor Lindl. grown in a simplified culture medium supplemented with different kinds of fruit pulp. The experimental design was completely randomised, with eight seedlings per replication and ten replications per treatment, for a total of 80 seedlings per treatment. The culture medium was made using 150 g L -1 of pulp (without peel or seed) from the following fruits: ripe Santa Cruz tomatoes (Solanum lycopersicum L.), dwarf bananas (Musa cavendishii L.) of intermediate ripeness, light green chayote (Sechium edule (Jacq.) Sw), ripe papaya (Carica papaya L.) or green coconut (Cocos nucifera L.).The treatment control was MS 50 %. The treatments and the control were kept in a growth chamber for seven months before evaluating seedling survival percentage, shoot height, number of leaves, rooting percentage, root number, root length and dry masses of shoot and roots. The highest percentages of seedling survival were obtained using MS 50 %, banana and coconut medium. The seedling survival and rooting percentages illustrate that it is possible to emphasise the culture medium MS 50% and the culture medium supplemented with coconut on the most traditional culture medium with banana or tomato pulp. For the in vitro development of Cattleya bicolor Lindl., a simplified culture medium supplemented with coconut pulp is the most suitable for use as an alternative to MS 50%. A simplified culture medium supplemented with papaya pulp is not recommended for the in vitro development of Cattleya bicolor Lindl.

Sexual transmission of Toxoplasma gondii in sheep

Male sheep of reproductive age were distributed into three groups: GI, a sheep inoculated (oral) with 2.0×105 oocysts of the P strain of Toxoplasma gondii; GII, a sheep infected (subcutaneous) with 1.0×106 tachyzoites of the RH strain of T. gondii; and GIII, a sheep kept as a control (not infected). After the inoculation of the males, 12 breeding ewes, which were not pregnant and which were serologically negative for reproductive diseases (particularly toxoplasmosis), were distributed into three groups, synchronized, and subsequently exposed to natural mating with previously inoculated males. The distribution was as follows: five ewes that underwent natural mating with the GI male, five ewes that were exposed to natural mating with the GII male, and two ewes that were mated with the non-infected male (control). Serum samples of all the ewes were collected on days -30, -14, -7, -1, and 0 (days before natural mating) and on days 1, 3, 5, 7, 11, 14, and weekly until birth; the presence of serum antibodies against T. gondii was assessed by IFAT. Using a bioassay and PCR, T. gondii was isolated from the semen of the infected reproducing sheep before mating. Following natural mating, 5 of the 12 females displayed antibodies specific for T. gondii; of these animals, two of the ewes underwent natural mating with the male inoculated with oocysts (GI) and three with the male infected with tachyzoites (GII). One of the females that displayed antibodies specific to this coccidian and that underwent natural mating with the GII sheep had a macerated fetus on the 70th day following coverage. Using a bioassay after the birth, it was possible to isolate T. gondii from samples of the pool of tissues from the five females that seroconverted after natural mating and from their respective lambs. Using PCR, the DNA of T. gondii was isolated from the pool of tissues from one and two females exposed to natural mating with the reproductive males infected with the oocysts and tachyzoites, respectively. Using this technique, it was also possible to diagnose the presence of the parasite in the pool of tissues from the lambs of one female that underwent natural mating with the male sheep infected with oocysts. These results demonstrated the sexual transmission of T. gondii in the sheep species with consequent vertical transmission to their lambs. © 2013 Elsevier B.V.

Implementation of an AC model for transmission expansion planning considering reliability constraints

In this paper, a hybrid heuristic methodology that employs fuzzy logic for solving the AC transmission network expansion planning (AC-TEP) problem is presented. An enhanced constructive heuristic algorithm aimed at obtaining a significant quality solution for such complicated problems considering contingency is proposed. In order to indicate the severity of the contingency, 2 performance indices, namely the line flow performance index and voltage performance index, are calculated. An interior point method is applied as a nonlinear programming solver to handle such nonconvex optimization problems, while the objective function includes the costs of the new transmission lines as well as the real power losses. The performance of the proposed method is examined by applying it to the well-known Garver system for different cases. The simulation studies and result analysis demonstrate that the proposed method provides a promising way to find an optimal plan. Obtaining the best quality solution shows the capability and the viability of the proposed algorithm in AC-TEP. © Tübi̇tak..

Ethanol electro-oxidation in an alkaline medium using Pd/C, Au/C and PdAu/C electrocatalysts prepared by electron beam irradiation

Carbon-supported Pd, Au and bimetallic PdAu (Pd:Au 90:10, 50:50 and 30:70 atomic ratios) electrocatalysts were prepared using electron beam irradiation. The obtained materials were characterized by energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD) and transmission electron microscopy (TEM), and their catalytic activities toward ethanol electro-oxidation were evaluated in an alkaline medium using electrochemical techniques, in situ attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR) analysis and a single alkaline direct ethanol fuel cell (ADEFC). EDX analyses showed that the actual Pd: Au atomic ratios were very similar to the nominal ones. X-ray diffractograms of PdAu/C electrocatalysts evidenced the presence of Pd-rich (fcc) and Au-rich (fcc) phases. TEM analysis showed a homogeneous dispersion of nanoparticles on the carbon support, with an average size in the range of 3-5 nm and broad size distributions. Cyclic voltammetry (CV) and chronoamperometry (CA) experiments revealed the superior ambient activity toward ethanol electro-oxidation of PdAu/C electrocatalysts with Pd: Au ratios of 90:10 and 50:50. In situ ATR-FTIR spectroscopy measurements have shown that the mechanism for ethanol electro-oxidation is dependent on catalyst composition, leading to different reaction products, such as acetaldehyde and acetate, depending on the number of electrons transferred. Experiments on a single ADEFC were conducted between 50 and 900 C, and the best performance of 44 mW cm-2 in 2.0molL-1 ethanol was obtained at 850C for the Pd:Au 90:10 catalysts. This superior performance is most likely associated with enhancement of ethanol adsorption on Pd, oxidation of the intermediates, the presence of gold oxide-hydroxyl species, low mean particle diameters and better distribution of particles on the support. © 2013 Elsevier Ltd. All rights reserved.

Extração de segmentos de rodovias em imagens de resoluções variadas usando o princípio de bordas paralelas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistema de aterramento com cabo contrapeso representado por linhas de transmissão implementado em Matlab com circuitos em cascatas de PÍ

Pós-graduação em Engenharia Elétrica - FEIS

Gestão da informação no jornalismo on-line: estudo do portal Campo Grande News

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do tempo de fotoativação na citotoxicidade de cimentos de ionômero de vidro modificados por resina em células de linhagem odontoblástica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Research on policies and institutions to support small and medium scale enterprise in the Caribbean: Trinidad adn Tobago report

The Government of Trinidad and Tobago continues to provide support to SMEs in order to enhance their international competitiveness. The increasing effects of globalization and the reality of several trade agreements require that local businesses attain and maintain a level of competitiveness which ensures their continued survival and growth. This report examines in detail the policy environment within which these enterprises operate. It also examines the role of the key implementing agencies such as the BDC and NEDCO for government’s policy on the sector and also the role of the respective line ministries. These organizations strive to deliver value added technical, financial and export promotion services to its clients on a subsidised basis. The services offered reflect five key business areas such as financing, training, technical assistance, trade assistance, business re-engineering, project management and export promotion. In the case of the BDC its services target six sectors: food and beverage, metal processing, leisure marine, including yachting, information and communication technology/electronics, printing and packaging and entertainment. These said sectors are identified by the government, on the basis of a study which was done by TIDCO, for the promotion of a cluster development strategy. In the case of NEDCO it targets the following sectors: art and craft, food and beverages, fashion and fashion accessories, culture and ecotourism, bed and breakfast operations, indigenous entertainment and light manufacturing.

Efeito do tratamento térmico nas propriedades ópticas de pontos quânticos emitindo na faixa espectral de 1,3 a 1,5 üm

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Eletrônica molecular via método híbrido DFT/FGNE em anéis fenilas acoplados a eletrodos metálicos de nanotubos de carbono: a regra de conformação e quiralidade molecular

Nesta tese, investigamos detalhadamente as propriedades de transporte eletrônico, conformacional e de simetria de estruturas de Nanotubos de Carbono de Parede Simples zigzag (9,0), NCPS zz9, acopladas a anéis fenilas (2, 3, 4 e 5) sob influência de campo elétrico externo (voltagem) via método híbrido da Teoria do Funcional Densidade (DFT) do tipo B3LYP 6-311G(d,p) combinado com Função de Green de Não Equilíbrio (FGNE) e Teoria de Grupo. Verificamos uma boa relação entre: 1- o índice quiral () por Teoria de Grupo e a lei do cos2 (, ângulo diedral) por geometria sob a influência de campo elétrico externo, pois  só depende das posições atômicas (), das conformações, e também está fortemente correlacionada a corrente que passa através do sistema; 2- a condutância normalizada (G/Go) é proporcional a cos2 na região do gap (EHOMO-ELUMO), isto é, nas regiões onde ocorre a ressonância e a resistência diferencial negativa (RDN); 3- o gráfico Fowler-Northeim (FN) exibe mínimo de voltagem (Vmin) que ocorre sempre que a cauda de um pico de transmissão ressonante entra na janela de voltagem, isto é, quando nessas estruturas ocorre uma RDN, pois o número de RDN na curva I-V está associado ao número de Vmin no gráfico FN e pode ser explicado pelo modelo de transporte molecular coerente; 4- a altura da barreira (EF - EHOMO e ELUMO - EF) como função do comprimento molecular; 5- Vmin como função da altura da barreira (EF - EHOMO) e do comprimento molecular. Assim, 1 implica que a conformação molecular desempenha um papel preponderante na determinação das propriedades de transporte da junção; 2 sugere que a lei do cos2 tem uma aplicabilidade mais geral independentemente da natureza dos eletrodos; 3 serve como um instrumento espectroscópico e também para identificar a molécula na junção; 4 e 5 a medida que o comprimento molecular atinge um certo valor (1,3nm) o Vmin permanece praticamente inalterado. Os resultados mostraram que as propriedades estruturais sofrem alterações significativas com o aumento da voltagem que estão em boa concordância com os valores encontrados na literatura. O comportamento das curvas IxV e G/GoxV perdem sua dependência linear para dar origem a um comportamento não linear com aparecimento de RDN. Tal ponto revela a modificação estrutural sofrida pelo sistema. A curva IxV confirmou as afirmações que foram feitas através da análise estrutural para o sistema considerado e mostrou como se dá o fluxo de carga nos sistemas analisados.

Medidas para caracterização de crosstalk e ruído impulsivo em sistemas DSL

O presente trabalho apresenta testes e experimentos laboratoriais para medição de crosstalk e ruído impulsivo em sistemas DSL, os quais são de grande importância para o aperfeiçoamento e evolução deste tipo de tecnologia. O estudo do crosstalk voltou-se a uma campanha de medições em cabos telefônicos reais de curto comprimento e operando em altas frequências. Os resultados destas medidas foram utilizados no cálculo da capacidade de transmissão de sistemas DSL operando neste cenário ainda pouco explorado. O estudo do ruído impulsivo foi focado no desenvolvimento de um sistema digitalizador de sinais de linha telefônica possibilitando a medição real deste tipo de fenômeno.

Modelagem numérica de dados MCSEM 3D usando computação paralela

Desenvolvemos a modelagem numérica de dados sintéticos Marine Controlled Source Electromagnetic (MCSEM) usada na exploração de hidrocarbonetos para simples modelos tridimensionais usando computação paralela. Os modelos são constituidos de duas camadas estrati cadas: o mar e o sedimentos encaixantes de um delgado reservatório tridimensional, sobrepostas pelo semi-espaço correspondente ao ar. Neste Trabalho apresentamos uma abordagem tridimensional da técnica dos elementos nitos aplicada ao método MCSEM, usando a formulação da decomposição primária e secundária dos potenciais acoplados magnético e elétrico. Num pós-processamento, os campos eletromagnéticos são calculados a partir dos potenciais espalhados via diferenciação numérica. Exploramos o paralelismo dos dados MCSEM 3D em um levantamento multitransmissor, em que para cada posição do transmissor temos o mesmo processo de cálculos com dados diferentes. Para isso, usamos a biblioteca Message Passing Interface (MPI) e o modelo servidor cliente, onde o processador administrador envia os dados de entradas para os processadores clientes computar a modelagem. Os dados de entrada são formados pelos parâmetros da malha de elementos nitos, dos transmissores e do modelo geoelétrico do reservatório. Esse possui geometria prismática que representa lentes de reservatórios de hidrocarbonetos em águas profundas. Observamos que quando a largura e o comprimento horizontais desses reservatório têm a mesma ordem de grandeza, as resposta in-line são muito semelhantes e conseqüentemente o efeito tridimensional não é detectado. Por sua vez, quando a diferença nos tamanhos da largura e do comprimento do reservatório é signi cativa o efeito 3D é facilmente detectado em medidas in-line na maior dimensão horizontal do reservatório. Para medidas na menor dimensão esse efeito não é detectável, pois, nesse caso o modelo 3D se aproxima de um modelo bidimensional. O paralelismo dos dados é de rápida implementação e processamento. O tempo de execução para a modelagem multitransmissor em ambiente paralelo é equivalente ao tempo de processamento da modelagem para um único transmissor em uma máquina seqüêncial, com o acréscimo do tempo de latência na transmissão de dados entre os nós do cluster, o que justi ca o uso desta metodologia na modelagem e interpretação de dados MCSEM. Devido a reduzida memória (2 Gbytes) em cada processador do cluster do departamento de geofísica da UFPA, apenas modelos muito simples foram executados.

Ultrastructural description of Ceratomyxa microlepis sp. nov. (Phylum Myxozoa): a parasite infecting the gall bladder of Hemiodus microlepis, a freshwater teleost from the Amazon River

A new ceratomyxid parasite was examined for taxonomic identification, upon being found infecting the gall bladder of Hemiodus microlepis (Teleostei: Hemiodontidae), a freshwater teleost collected from the Amazon River, Brazil. Light and transmission electron microscopy revealed elongated crescent-shaped spores constituted by two asymmetrical shell valves united along a straight sutural line, each possessing a lateral projection. The spores body measured 5.2 ± 0.4 µm (n = 25) in length and 35.5 ± 0.9 µm (n = 25) in total thickness. The lateral projections were asymmetric, one measuring 18.1 ± 0.5 µm (n = 25) in thickness and the other measuring 17.5 ± 0.5 µm (n = 25) in thickness. Two equal-sized subspherical polar capsules measuring 2.2 ± 0.3 µm in diameter were located at the same level, each possessing a polar filament with 5-6 coils. The sporoplasm was binucleate. Considering the morphometric data analyzed from the microscopic observations, as well as the host species and its geographical location, this paper describes a new myxosporean species, herein named Ceratomyxa microlepis sp. nov.; therefore representing the first description of a freshwater ceratomyxid from the South American region.