Reductions in insecticide use from adoption of Bt cotton in South Africa: impacts on economic performance and toxic load to the environment

The study reported presents the findings relating to commercial growing of genetically-modified Bt cotton in South Africa by a large sample of smallholder farmers over three seasons (1998/99, 1999/2000, 2000/01) following adoption. The analysis presents constructs and compares groupwise differences for key variables in Bt v. non-Bt technology and uses regressions to further analyse the production and profit impacts of Bt adoption. Analysis of the distribution of benefits between farmers due to the technology is also presented. In parallel with these socio-economic measures, the toxic loads being presented to the environment following the introduction of Bt cotton are monitored in terms of insecticide active ingredient (ai) and the Biocide Index. The latter adjusts ai to allow for differing persistence and toxicity of insecticides. Results show substantial and significant financial benefits to smallholder cotton growers of adopting Bt cotton over three seasons in terms of increased yields, lower insecticide spray costs and higher gross margins. This includes one particularly wet, poor growing season. In addition, those with the smaller holdings appeared to benefit proportionately more from the technology (in terms of higher gross margins) than those with larger holdings. Analysis using the Gini-coefficient suggests that the Bt technology has helped to reduce inequality amongst smallholder cotton growers in Makhathini compared to what may have been the position if they had grown conventional cotton. However, while Bt growers applied lower amounts of insecticide and had lower Biocide Indices (per ha) than growers of non-Bt cotton, some of this advantage was due to a reduction in non-bollworm insecticide. Indeed, the Biocide Index for all farmers in the population actually increased with the introduction of Bt cotton. The results indicate the complexity of such studies on the socio-economic and environmental impacts of GM varieties in the developing world.

An integrated mathematical model to evaluate nutrient partition in dairy cattle between the animal and its environment

In the past decade, a number of mechanistic, dynamic simulation models of several components of the dairy production system have become available. However their use has been limited due to the detailed technical knowledge and special software required to run them, and the lack of compatibility between models in predicting various metabolic processes in the animal. The first objective of the current study was to integrate the dynamic models of [Brit. J. Nutr. 72 (1994) 679] on rumen function, [J. Anim. Sci. 79 (2001) 1584] on methane production, [J. Anim. Sci. 80 (2002) 2481 on N partition, and a new model of P partition. The second objective was to construct a decision support system to analyse nutrient partition between animal and environment. The integrated model combines key environmental pollutants such as N, P and methane within a nutrient-based feed evaluation system. The model was run under different scenarios and the sensitivity of various parameters analysed. A comparison of predictions from the integrated model with the original simulation models showed an improvement in N excretion since the integrated model uses the dynamic model of [Brit. J. Nutr. 72 (1994) 6791 to predict microbial N, which was not represented in detail in the original model. The integrated model can be used to investigate the degree to which production and environmental objectives are antagonistic, and it may help to explain and understand the complex mechanisms involved at the ruminal and metabolic levels. A part of the integrated model outputs were the forms of N and P in excreta and methane, which can be used as indices of environmental pollution. (C) 2004 Elsevier B.V All rights reserved.

The economic dimensions of integrating flood management and agri-environment through washland creation: a case from Somerset, England

In many river floodplains in the UK, there has been a long history of flood defence, land reclamation and water regime management for farming. In recent years, however, changing European and national policies with respect to farming, environment and flood management are encouraging a re-appraisal of land use in rural areas. In particular, there is scope to develop, through the use of appropriate promotional mechanisms, washland areas, which will simultaneously accommodate winter inundation, support extensive farming methods, deliver environmental benefits, and do this in a way which can underpin the rural economy. This paper explores the likely economic impacts of the development of flood storage and washland creation. In doing so, consideration is given to feasibility of this type of development, the environmental implications for a variety of habitats and species, and the financial and institutional mechanisms required to achieve implementation. (C) 2007 Elsevier Ltd. All rights reserved.

Quantitative proteomics using uniform 15N-labeling, mascot and the trans-proteomic pipeline

Stable isotope labeling combined with MS is a powerful method for measuring relative protein abundances, for instance, by differential metabolic labeling of some or all amino acids with 14N and 15N in cell culture or hydroponic media. These and most other types of quantitative proteomics experiments using high-throughput technologies, such as LC-MS/MS, generate large amounts of raw MS data. This data needs to be processed efficiently and automatically, from the mass spectrometer to statistically evaluated protein identifications and abundance ratios. This paper describes in detail an approach to the automated analysis of uniformly 14N/15N-labeled proteins using MASCOT peptide identification in conjunction with the trans-proteomic pipeline (TPP) and a few scripts to integrate the analysis workflow. Two large proteomic datasets from uniformly labeled Arabidopsis thaliana were used to illustrate the analysis pipeline. The pipeline can be fully automated and uses only common or freely available software.

Stress-induced changes in the Schizosaccharomyces pombe proteome using two-dimensional difference gel electrophoresis, mass spectrometry and a novel integrated robotics platform

Robotic and manual methods have been used to obtain identification of significantly changing proteins regulated when Schizosaccharomyces pombe is exposed to oxidative stress. Differently treated S. pombe cells were lysed, labelled with CyDye and analysed by two-dimensional difference gel electrophoresis. Gel images analysed off-line, using the DeCyder image analysis software [GE Healthcare, Amersham, UK] allowed selection of significantly regulated proteins. Proteins displaying differential expression were excised robotically for manual digestion and identified by matrix-assisted laser desorption/ionisation - mass spectrometry (MALDI-MS). Additionally the same set of proteins displaying differential expression were automatically cut and digested using a prototype robotic platform. Automated MALDI-MS, peak label assignment and database searching were utilised to identify as many proteins as possible. The results achieved by the robotic system were compared to manual methods. The identification of all significantly altered proteins provides an annotated peroxide stress-related proteome that can be used as a base resource against which other stress-induced proteomic changes can be compared.

The gas-phase reactions Of SiCl4 and Si2Cl6 with CH3OH and C2H5OH: an investigation by mass spectrometry and matrix-isolation infrared spectroscopy

The gas phase reactions Of SiCl4 and Si2Cl6 With CH3OH and C2H5OH have been investigated using both mass spectrometry and matrix isolation techniques. SiCl4 reacts with both CH3OH and C2H5OH upon mixing of the vapours for times in excess of 3 h to generate the HCl-elimination products SiCl3OR (R = CH3 or C2H5). The identity of these products is confirmed by deuteration experiments and by ab initio calculations at the HF/6-31G(d) level. Further products are generated when the mixture is passed through a tube heated to 750degreesC. Si2Cl6 reacts with CH3OH and C2H5OH via a different mechanism in which the Si-Si bond is cleaved to yield SiCl3OR and HCl. Other products of the type SiCl4-n(OCH3)(n) are tentatively identified by a combination of mass spectrometric and matrix isolation measurements. These latter products indicate further replacement of Cl atoms by OR groups as a result of reaction of CH3OH or C2H5OH with the initial product.

Quantitative proteomics using uniform N-15-labeling, MASCOT, and the trans-proteomic pipeline

Stable isotope labeling combined with MS is a powerful method for measuring relative protein abundances, for instance, by differential metabolic labeling of some or all amino acids with N-14 and N-15 in cell culture or hydroponic media. These and most other types of quantitative proteomics experiments using high-throughput technologies, such as LC-MS/MS, generate large amounts of raw MS data. This data needs to be processed efficiently and automatically, from the mass spectrometer to statistically evaluated protein identifications and abundance ratios. This paper describes in detail an approach to the automated analysis of Uniformly N-14/N-15-labeled proteins using MASCOT peptide identification in conjunction with the trans-proteomic pipeline (TPP) and a few scripts to integrate the analysis workflow. Two large proteomic datasets from uniformly labeled Arabidopsis thaliana were used to illustrate the analysis pipeline. The pipeline can be fully automated and uses only common or freely available software.

Stress-induced changes in the Schizosaccharomyces pombe proteome using two-dimensional difference gel electrophoresis, mass spectrometry and a novel integrated robotics platform

Robotic and manual methods have been used to obtain identification of significantly changing proteins regulated when Schizosaccharomyces pombe is exposed to oxidative stress. Differently treated S. pombe cells were lysed, labelled with CyDye (TM) and analysed by two-dimensional difference gel. electrophoresis. Gel images analysed off-line, using the DeCyder (TM) image analysis software [GE Healthcare, Amersham, UK] allowed selection of significantly regulated proteins. Proteins displaying differential expression were excised robotically for manual digestion and identified by matrix-assisted laser desorption/ionisation - mass spectrometry (MALDI-MS). Additionally the same set of proteins displaying differential expression were automatically cut and digested using a prototype robotic platform. Automated MALDI-MS, peak label assignment and database searching were utilised to identify as many proteins as possible. The results achieved by the robotic system were compared to manual methods. The identification of all significantly altered proteins provides an annotated peroxide stress-related proteome that can be used as a base resource against which other stress-induced proteomic changes can be compared.

Innovation care pathways and the healthcare built environment: An explanatory framework and research agenda

The built environment in which health and social care is delivered can have an impact on the efficiency and outcomes of care processes. The health-care estate is large and growing and is expensive to build, adapt and maintain. The design of these buildings is a complex, difficult and political process. Better use of care pathways as an input to the design and use of the built environment has the potential to deliver significant benefits. A number of variations on the idea of care pathways are already used in designing health-care buildings but this is under-researched. This paper provides a framework for thinking about care pathways and the health-care built environment. The framework distinguishes between five different pathway ‘types’ defined for the purpose of understanding the relationship between pathways and infrastructure. The five types are: ‘care pathways’, ‘integrated care pathways’, ‘patient pathways’, ‘patient journeys’ and ‘patient flows’. The built environment implications of each type are discussed and recommendations made for those involved in either building development or care pathway projects.

Measurement of mother-infant interactions and the home environment in a European setting: preliminary results from a cross-cultural study

Background Infant development is adversely affected in the context of postnatal depression. This relationship may be mediated by both the nature of early mother-infant interactions and the quality of the home environment. Aim To establish the usefulness of the Global Ratings Scales of Mother-Infant Interaction and the Infant-Toddler version of the Home Observation for the Measurement of the Environment (IT-HOME), and to test expected associations of the measures with characteristics of the social context and with major or minor depression. Method Both assessments were administered postnatally in four European centres; 144 mothers were assessed with the Global Ratings Scales and 114 with the IT-HOME. Affective disorder was assessed by means of the Structured Clinical Interview for DSM-IV Disorders. Results Analyses of mother-infant interaction indicated no main effect for depression but maternal sensitivity to infant behaviour was associated with better infant communication, especially for women who were not depressed. Poor overall emotional support also reduced sensitivity scores. Poor support was also related to poorer IT-HOME scores, but there was no effect of depression. Conclusions The Global Ratings Scales were effectively applied but there was less evidence of the usefulness of the IT-HOME. Declaration of interest None.

State-of-the-art for entity-centric repository and authoring environment for multimedia

Many projects, e.g. VIKEF [13] and KIM [7], present grounded approaches for the use of entities as a means of indexing and retrieval of multimedia resources from heterogeneous sources. In this paper, we discuss the state-of-the-art of entity-centric approaches for multimedia indexing and retrieval. A summary of projects employing entity-centric repositories are portrayed. This paper also looks at the current state-of-the-art authoring environment, Macromedia Authorware, and the possibility of potential extension of this environment for entity-based multimedia authoring.