The influence of role models on strudents' entrepreneurial intentions

The Smart State initiative requires both improved education and training, panicularly in technical fields, plus entrepreneurship to commercialise new ideas. In this study, we propose an entrepreneurial intentions model as a guide to examine the educational choices and entrepreneurial intentions of first-year University students, focusing on the effect of role models. A survey of over 1000 first-year University students revealed that the most enterprising students were choosing to study in the disciplines of information technology and business, economics and law, or selecting dual degree programs that include business. The role models most often identified for their choice of field of study were parents, followed by teachers and peers, with females identifying more role models than males. For entrepreneurship, students' role models were parents and peers, followed by famous persons and teachers. Males andfemales identified similar numbers of role models, but malesfound starting a business more desirable and more feasible, and reponed higher entrepreneurial intention. The implications of these findings for Sman State policy are discussed.

In vivo and in vitro models demonstrate a role for caveolin-1 in the pathogenesis of ischaemic acute renal failure

Caveolae and their proteins, the caveolins, transport macromolecules; compartmentalize signalling molecules; and are involved in various repair processes. There is little information regarding their role in the pathogenesis of significant renal syndromes such as acute renal failure (ARF). In this study, an in vivo rat model of 30 min bilateral renal ischaemia followed by reperfusion times from 4 h to 1 week was used to map the temporal and spatial association between caveolin-1 and tubular epithelial damage (desquamation, apoptosis, necrosis). An in vitro model of ischaemic ARF was also studied, where cultured renal tubular epithelial cells or arterial endothelial cells were subjected to injury initiators modelled on ischaemia-reperfusion (hypoxia, serum deprivation, free radical damage or hypoxia-hyperoxia). Expression of caveolin proteins was investigated using immunohistochemistry, immunoelectron microscopy, and immunoblots of whole cell, membrane or cytosol protein extracts. In vivo, healthy kidney had abundant caveolin-1 in vascular endothelial cells and also some expression in membrane surfaces of distal tubular epithelium. In the kidneys of ARF animals, punctate cytoplasmic localization of caveolin-1 was identified, with high intensity expression in injured proximal tubules that were losing basement membrane adhesion or were apoptotic, 24 h to 4 days after ischaemia-reperfusion. Western immunoblots indicated a marked increase in caveolin-1 expression in the cortex where some proximal tubular injury was located. In vitro, the main treatment-induced change in both cell types was translocation of caveolin-1 from the original plasma membrane site into membrane-associated sites in the cytoplasm. Overall, expression levels did not alter for whole cell extracts and the protein remained membrane-bound, as indicated by cell fractionation analyses. Caveolin-1 was also found to localize intensely within apoptotic cells. The results are indicative of a role for caveolin-1 in ARF-induced renal injury. Whether it functions for cell repair or death remains to be elucidated. Copyright (C) 2003 John Wiley Sons, Ltd.

A new method for analysing the equilibrium and time-dependent behaviour of Markovian models

Many large-scale stochastic systems, such as telecommunications networks, can be modelled using a continuous-time Markov chain. However, it is frequently the case that a satisfactory analysis of their time-dependent, or even equilibrium, behaviour is impossible. In this paper, we propose a new method of analyzing Markovian models, whereby the existing transition structure is replaced by a more amenable one. Using rates of transition given by the equilibrium expected rates of the corresponding transitions of the original chain, we are able to approximate its behaviour. We present two formulations of the idea of expected rates. The first provides a method for analysing time-dependent behaviour, while the second provides a highly accurate means of analysing equilibrium behaviour. We shall illustrate our approach with reference to a variety of models, giving particular attention to queueing and loss networks. (C) 2003 Elsevier Ltd. All rights reserved.

Critical comparison of Julius Kruttschnitt Mineral Research Centre (JKMRC) blast fragmentation models

Blast fragmentation can have a significant impact on the profitability of a mine. An optimum run of mine (ROM) size distribution is required to maximise the performance of downstream processes. If this fragmentation size distribution can be modelled and controlled, the operation will have made a significant advancement towards improving its performance. Blast fragmentation modelling is an important step in Mine to Mill™ optimisation. It allows the estimation of blast fragmentation distributions for a number of different rock mass, blast geometry, and explosive parameters. These distributions can then be modelled in downstream mining and milling processes to determine the optimum blast design. When a blast hole is detonated rock breakage occurs in two different stress regions - compressive and tensile. In the-first region, compressive stress waves form a 'crushed zone' directly adjacent to the blast hole. The second region, termed the 'cracked zone', occurs outside the crush one. The widely used Kuz-Ram model does not recognise these two blast regions. In the Kuz-Ram model the mean fragment size from the blast is approximated and is then used to estimate the remaining size distribution. Experience has shown that this model predicts the coarse end reasonably accurately, but it can significantly underestimate the amount of fines generated. As part of the Australian Mineral Industries Research Association (AMIRA) P483A Mine to Mill™ project, the Two-Component Model (TCM) and Crush Zone Model (CZM), developed by the Julius Kruttschnitt Mineral Research Centre (JKMRC), were compared and evaluated to measured ROM fragmentation distributions. An important criteria for this comparison was the variation of model results from measured ROM in the-fine to intermediate section (1-100 mm) of the fragmentation curve. This region of the distribution is important for Mine to Mill™ optimisation. The comparison of modelled and Split ROM fragmentation distributions has been conducted in harder ores (UCS greater than 80 MPa). Further work involves modelling softer ores. The comparisons will be continued with future site surveys to increase confidence in the comparison of the CZM and TCM to Split results. Stochastic fragmentation modelling will then be conducted to take into account variation of input parameters. A window of possible fragmentation distributions can be compared to those obtained by Split . Following this work, an improved fragmentation model will be developed in response to these findings.

Solvable models of Bose-Einstein condensates: A new algebraic Bethe ansatz scheme

A new algebraic Bethe ansatz scheme is proposed to diagonalize classes of integrable models relevant to the description of Bose-Einstein condensation in dilute alkali gases. This is achieved by introducing the notion of Z-graded representations of the Yang-Baxter algebra. (C) 2003 American Institute of Physics.

Integrable generalized spin ladder models based on the SU(1|3) and SU(3|1) algebras

We present two integrable spin ladder models which possess a general free parameter besides the rung coupling J. The models are exactly solvable by means of the Bethe ansatz method and we present the Bethe ansatz equations. We analyze the elementary excitations of the models which reveal the existence of a gap for both models that depends on the free parameter. (C) 2003 American Institute of Physics.

An approach to verifying and debugging simulation models governed by ordinary differential equations: Part 1. Methodology for residual generation

For dynamic simulations to be credible, verification of the computer code must be an integral part of the modelling process. This two-part paper describes a novel approach to verification through program testing and debugging. In Part 1, a methodology is presented for detecting and isolating coding errors using back-to-back testing. Residuals are generated by comparing the output of two independent implementations, in response to identical inputs. The key feature of the methodology is that a specially modified observer is created using one of the implementations, so as to impose an error-dependent structure on these residuals. Each error can be associated with a fixed and known subspace, permitting errors to be isolated to specific equations in the code. It is shown that the geometric properties extend to multiple errors in either one of the two implementations. Copyright (C) 2003 John Wiley Sons, Ltd.

An approach to verifying and debugging simulation models governed by ordinary differential equations: Part 2. Residuals analysis and a case study

In Part 1 of this paper a methodology for back-to-back testing of simulation software was described. Residuals with error-dependent geometric properties were generated. A set of potential coding errors was enumerated, along with a corresponding set of feature matrices, which describe the geometric properties imposed on the residuals by each of the errors. In this part of the paper, an algorithm is developed to isolate the coding errors present by analysing the residuals. A set of errors is isolated when the subspace spanned by their combined feature matrices corresponds to that of the residuals. Individual feature matrices are compared to the residuals and classified as 'definite', 'possible' or 'impossible'. The status of 'possible' errors is resolved using a dynamic subset testing algorithm. To demonstrate and validate the testing methodology presented in Part 1 and the isolation algorithm presented in Part 2, a case study is presented using a model for biological wastewater treatment. Both single and simultaneous errors that are deliberately introduced into the simulation code are correctly detected and isolated. Copyright (C) 2003 John Wiley Sons, Ltd.

An??lise da aloca????o de investimentos de empresas privadas e p??blicas no setor el??trico brasileiro

Este trabalho analisa a aloca????o de recursos de empresas p??blicas e privadas do setor el??trico brasileiro no per??odo de 1995-2005 e a contribui????o das estrat??gias de investimentos dessas empresas para o crescimento sustentado do setor. Para tanto, primeiramente, avalia-se a evolu????o da tarifa m??dia de energia frente aos diferentes ??ndices de pre??os da economia e seus poss??veis reflexos sobre o consumo de energia e sobre os resultados financeiros das empresas. Em seguida, analisa-se o comportamento dos investimentos realizados pelas empresas p??blicas e privadas no setor el??trico ao longo do per??odo observado, tomando como refer??ncia dois modelos de determina????o de investimento, em diferentes contextos. O trabalho aponta a necessidade de continuidade da participa????o da empresa p??blica no novo modelo regulat??rio do setor el??trico brasileiro, que desempenha papel importante no ajustamento da aloca????o de recursos, com vistas a promover o desenvolvimento sustentado do setor el??trico brasileiro.

O pátio jesuítico no Palácio Anchieta: narrativas tipomorfológicas e paisagísticas na cidade de Vitória (ES)

A hipótese defendida nesta pesquisa se baseia na possibilidade de a arquitetura jesuítica implantada em terras brasileiras (século XVI) dialogar e agenciar, num mesmo corpo edificado, e de modo inter-relacionado, aspectos relativos à morfologia urbana, tipologia e paisagem. Lama explica que, como disciplina, a morfologia urbana agrega para si não somente o ambiente construído, mas os meios pelos quais este foi construído em sua interação com a forma urbana, ou seja, os “fenômenos sociais, econômicos e outros motores da urbanização” (LAMAS, 1992). Entender a forma urbana é entender seus elementos constituintes, “quer em ordem à leitura ou análise do espaço, quer em ordem à sua concepção ou produção” (LAMAS, 1992). Estudar a forma urbana significa compreender o lugar onde se insere a cidade e seus elementos constituintes, seus espaços e a inter-relação entre eles e seu contexto, em um espectro abrangente do que se denomina cidade, e urbano. A tipologia arquitetônica e a morfologia urbana estão interligadas no cerne de suas análises, considerando que ambas, segundo Pereira, estudam “duas ordens de fatos homogêneos” (PEREIRA, 2012); estudam elementos constituintes da cidade – arquitetônicos e espaciais – que se sobrepõem ou se complementam de acordo com a escala de análise utilizada. A arquitetura jesuítica do Brasil colonial modela de modo determinante a construção de distintos núcleos urbanos originários na costa brasileira no século XVI. Isso, por meio da implantação de tipologia edilícia que acompanha a doutrina jesuítica de localização e escolha do sítio para suas construções, preconizando segurança, visibilidade do entorno e facilidade de acesso por rios ou pelo mar. Essas construções, realizadas em áreas elevadas, marcaram, por conseguinte, no tempo e no espaço, a paisagem dos primeiros núcleos urbanos brasileiros. A pesquisa analisou um dos exemplares históricos da arquitetura jesuítica no Estado do Espírito Santo, especificamente na cidade de Vitória, capital e núcleo urbano original da colonização portuguesa neste Estado. A instalação dos jesuítas na antiga Vila da Vitória, no séc. XVI, através de sua igreja dedicada a São Tiago e de seu colégio anexo, marca a presença tipológica de uma arquitetura religiosa que influencia a própria morfologia da cidade – caracterizando esta arquitetura como um tipomorfológico - e, por reflexo, participa da construção de sua paisagem urbana secular. Entende-se que o antigo complexo jesuítico de São Tiago e atual Palácio Anchieta, sede governamental e prédio cultural capixaba, é uma arquitetura que permeia estas três grandes narrativas arquitetônicas e urbanas: a tipologia, a morfologia e a paisagem.

Modelagem da distribuição geográfica atual e futura de Guerlinguetus (Rodentia, Sciuridae) no Brasil

O gênero Guerlinguetus, pertencente à família Sciuridae, possui sete espécies existentes no Brasil. Essas espécies têm sido tratadas como sinônimos de Sciurus aestuans, mas foram distinguidas em um gênero próprio com base nas revisões taxonômicas mais abrangentes disponíveis até recentemente. Apesar disso, pouco há na literatura sobre a distribuição das espécies desse gênero no Brasil e nenhuma pesquisa visando o conhecimento de sua distribuição futura havia sido realizada. A modelagem de distribuição potencial de espécies tem se tornado um componente importante dos planos de conservação e uma grande quantidade de técnicas têm sido desenvolvidas com esta finalidade. Ela pode ser uma ferramenta importante para determinar o grau de ameaça principalmente em espécies ou grupos com poucas informações disponíveis sobre sua distribuição. Com isso, o objetivo do presente trabalho foi verificar a influência das possíveis mudanças climáticas na distribuição das espécies de Guerlinguetus no Brasil, através da modelagem potencial das distribuições atual e futura dessas espécies. Para isso foram utilizados dados climáticos e topográficos e o cenário pessimista de emissão de CO2 (A2) para o ano 2070, do Modelo de Circulação Geral CSIRO, com base no quarto relatório do Painel Intergovernamental de Mudanças Climáticas. Os modelos gerados apresentaram perda significativa de áreas consideradas ambientalmente adequadas, do modelo de distribuição atual para o modelo de distribuição futura para as espécies de Guerlinguetus, com exceção de G. aestuans. Apesar da expansão da região potencial de distribuição de G. aestuans para o ano de 2070, a média dos valores de adequabilidade ambiental diminuiu em relação ao modelo de distribuição atual. A localização dessas espécies de hábito arborícola em áreas geograficamente espalhadas dentro da Amazônia, Cerrado e Mata Atlântica é preocupante, devido a grande perda de área original desses biomas, tornando possível a hipótese de ameaça à sobrevivência das espécies devido a mudanças ambientais futuras.

Measuring fund performance using multi-factor models: evidence for the Portuguese market

This paper examines the performance of Portuguese equity funds investing in the domestic and in the European Union market, using several unconditional and conditional multi-factor models. In terms of overall performance, we find that National funds are neutral performers, while European Union funds under-perform the market significantly. These results do not seem to be a consequence of management fees. Overall, our findings are supportive of the robustness of conditional multi-factor models. In fact, Portuguese equity funds seem to be relatively more exposed to smallcaps and more value-oriented. Also, they present strong evidence of time-varying betas and, in the case of the European Union funds, of time-varying alphas too. Finally, in terms of market timing, our tests suggest that mutual fund managers in our sample do not exhibit any market timing abilities. Nevertheless, we find some evidence of timevarying conditional market timing abilities but only at the individual fund level.

Models for the Reverse Engineering of Java/Swing Applications

Abstract. Interest in design and development of graphical user interface (GUIs) is growing in the last few years. However, correctness of GUI's code is essential to the correct execution of the overall software. Models can help in the evaluation of interactive applications by allowing designers to concentrate on its more important aspects. This paper describes our approach to reverse engineering abstract GUI models directly from the Java/Swing code.