979 resultados para Latossolo vermelho
Resumo:
A greenhouse experiment was carried out to evaluate the effects of soil phosphorus in the development of plants of Genipa americana L. Five doses of P (0, 50, 100, 200, and 400 mg dm -3) were applied in pots with 10 dm 3 of three Neossolos Quartzarênicos (NQ 1, NQ 2 and NQ 3) and one Latossolo Vermelho (LV), that were used in an experiment with Eucalyptus plants during three months. After this period, the soils were analyzed and a 30 cm height seedling of G. americana was planted in each pot. The experiment design was completely randomized, in 5 × 4 factorial scheme, with five replications. The largest biomass of the stem was obtained with 45 mg dm -3 of P in the soil NQ 1 (9% of clay) and 59 mg dm -3 in the soil NQ 3 (14% of clay). In the LV (40% of clay), the biomass of the stem increased linearly in the band of 3 to 148 mg dm -3 of P. The phosphorus critical level in the soil for 80% of the steam and leaves dry matter production of G. americana at planting phase is 15 mg dm -3, using an anion-exchange resin as extractor.
Resumo:
Soils submitted to the same management system in places with small relief variation manifest different spatial variability on their attributes. The objective of this work was to evaluate the spatial variability of the geometric medium diameter, aggregates in the >2 mm class, aggregates in the 2-1 mm class and organic matter of an Oxisol under culture of the sugarcane. Samplings of the soil in regular intervals of 10 m, in grid form, totaling 100 points, collected in the depths of 0.0-0.2 m and 0.2-0.4 m were made. Data were submitted to descriptive statistics, geostatistics and in sequence to kriging analyzes. Values of the variation coefficient were low for organic matter in the depth of 0.0-0.2 m, mean in the depth of 0.2-0.4 m, high for geometric medium diameter and mean for aggregates in the >2 mm class, aggregates in the 2-1 mm class in all studied depths. The occurrence of space dependence was observed for all the variables, and the largest ones were observed in the depth of 0.0-0.2 m. Small variations in the forms of the relief condition spatial variability differentiated for organic matter and stability of aggregates in the studied depths.
Resumo:
The mineralogical composition of the soil plow layer (0-20 cm) was analyzed for the following soil suborders (according to the Brazilian soil taxonomy): Neossolo Quartzarênico. Argissolo Vermelho-Amarelo, Cambissolo Háplico and Latossolo Vermelho-Amarelo which samples were collected from different regions of the Ceará State. The present study had the objectives of identifying potential sources of both total and non-exchangeable potassium forms for plants located at the different soil fractions. Then highest content of K occurred in the Cabissolo Háplico soil, including both the total and non-exchangeable K forms. In the Neossolo Quartzarênico. Argissolo Vermelho-Amarelo and Latossolo Vermelho-Amarelo, the highest contents of both forms of potassium were impregnated at the sand fraction. The amount of potassium found in the both sand and silt fractions has its origin in the orthoclase mineral which was detected in the mineralogical analysis. In the clay fractio, the origin of the potassium is illite and a inter-stratified mineral (mica+montmorillonite). As compared with the total content, the amount of non-exchangeable potassium is low for all the four soils. It was more concentrated at clay fraction of the Cambissolo soil. The potassium content sequence in the soil was the following: Cambissolo Háplico > Argissolo Vermelho-Amarelo > Neossolo Quartzarênico > Latossolo Vermelho-Amarelo. The results showed that the distribution of the forms of potassium among the soils differ as a function of the nature of the dominating minerals detected in the mineralogical analysis (illite and orthoclase) which was discussed above.
Resumo:
The tractor is one of the machines that more traffics over the soil during the processes involving agricultural production. The interaction tractor/soil is made by the tires which, in most of the cases, are pneumatic. The tire type and the tractor travel speed, interfere directly on the pressure over the soil. One of the techniques employed to evaluate the alterations that tractor traffic causes in the soil is to measure its Cone Index. The aim of this research was to evaluate the same Cone Index alterations caused by an agricultural tractor equipped with both radial tires and bias ply tires, trafficking mobilized soil in four different travel speeds. The experiment was performed in a LATOSSOLO VERMELHO, located 22°51' S, 48°25'W and 770 m of altitude, in Botucatu-SP, Brazil. The soil mobilization was performed with a chisel plow and a disc arrow. The traction was accomplished with a John Deere tractor, model 6600, with 88 kW of power and 6,723 kg. Equipment requiring a force of 25kN was traced by the tractor draw bar. The experimental design was in randomized blocks with 4 × 2 factorial arrangements, with two distinct treatments corresponding to the types of tires (bias and radial) and the four travel speeds, with six replications. There were selected the following speeds: 3.5, 3.9, 5.1 and 5.9 km h-1. To determine the soil resistance, there was utilized MSSU - Mobile Soil Sampling Unit, with which the Cone Index was obtained in layers from 0-100, 100-200, 200-300, 300-400, 400-500 and over 500 mm deep. The Cone Index where evaluated in areas with non contact between tire and soil (ICn) and in the tire footprint track (ICp). There were calculated the Cone Index increments caused by the tractor tire (AIC) and the results showed that as the tractor travel speed increased, there were observed decrements in the medium values of cone index. The radial tire provided smaller values of the Cone Index in the superficial layer of the soil (0 to 100 mm) in relation to the bias ply tire, when the speed was approximately 6 km h-1. The increment in the Cone Index, promoted by the tractor, was more intense in the first 200 mm depth, but it also reached the layer from 200 to 300 mm.
Resumo:
The aim of this study was the selection of Corymbia citriodora provenances for three different kinds of soils occurring in Luiz Antônio Experimental Station, São Paulo, Brazil (Latossolo Vermelho, Areia Quartzosa and Latossolo Roxo). The provenance test was established in 1983, with ten Corymbia citriodora provenances and one Eucalyptus grandis as control, original from a seed production area. The trials were established in a random block design with 11 treatments, three repetition and square plots with 25 trees. In 2008, there were evaluations of height, diameter at breast height (DBH, 1.3 m), stem form and survival. Significant differences among soils and provenances were detected for the growth traits, stem form and survival in all those studied soils. Significant provenance and soil interactions were not detected. All provenances showed higher growth in height and DBH in Purple Latosol. The control had a higher growth rate in relation to highness, DBH and stem form than Corymbia citriodora provenances in all the studied soils, but it presented, generally, a lower survival rate than Corymbia citriodora provenances. Pederneiras (11) Corymbia citriodora provenance presented a higher performance in relation to highness and DBH in all kinds of soils, and Gilgandra (4) provenance, original from Australia, had the worst development. Therefore, Pederneiras (11) provenance is, therefore, the best choose for reforestations in all those studied soils.
Resumo:
The objective of this study was to evaluate the performance of pineapple cultivar Smooth Cayenne as the physical production and the quality of the fruit when subjected to different frequencies of water dpeth and soil water in Triângulo Mineiro - Uberaba-MG. The experimental area soil is Oxisol, clay loam sandy and soft undulating local relief. A randomized block design in a factorial 4 x 2 with four levels of soil water depth (50%, 75%, 100% and 125%) of crop evapotranspiration (ETc) and two irrigation frequencies (1 day and 3 days = F1 = F2) and four replications was utilized. The crop productivity, number of seedlings, mean weight, diameter, and hardness of the fruit, plus water use efficiency were evaluated. Productivity was not significantly affected by the water depth and by the frequency of water applied; however the fruit shell resistance, the efficiency of water use, and ratoon seedlings were significantly influenced by irrigation, the water depth of 50% of the crop evapotranspiration (ETC) provided greater efficiency of water use for the production of pineapple fruit.
Resumo:
The use of cultivars efficient in nutrient use is essential to increase yield and reduce production costs. The objective of this study was to evaluate absorption and nutrients use efficiency on five potato cultivars. The experiment was conduced in Itaí, São Paulo State, Brazil, in winter cropping season of 2008 on Oxisol. The experimental design was randomized blocks with split-plots and four replications. Plots comprised the five potato cultivars and subplots were established by sampling times, performed at planting and every seven days after emergence. At 97 DAP was calculated the nutrients use efficiency for dry matter production and at 122 DAP were calculated the nutrients use efficiency for fresh tuber and tuber dry matter yield. Mondial and Asterix cultivars showed greater dry matter production, higher fresh tubers yield and nutrients accumulation. Nutrients use efficiency for total dry matter and tubers dry matter, was similar among cultivars, but Ágata was more efficient in nutrients use efficiency for fresh tubers yield.
Resumo:
The objective of this work was to evaluate the agronomic performance and grain quality, especially the grain technological characteristics in the common bean genotypes, cultivated in winter-spring season. The experiment was carried out in Jaboticabal-SP, in a Rhodic Hapludox. The experimental design was a randomized block with 17 treatments (genotypes) with three replications. The plots had been composed for 17 carioca common bean group genotypes (Pérola, BRS Cometa, BRS Pontal, IPR Juriti, CNFC 10703, CNFC 10713, CNFC 10716, CNFC 10721, CNFC 10729, CNFC 10733, CNFC 10742, CNFC 10753, CNFC 10757, CNFC 10758, CNFC 10762, CNFC 10763 and CNFC 10813). BRS Pontal and CNFC 10716 showed simultaneously the higher number of per plant and grain yield. The technological characteristics more expressive was verified in CNFC 10703, CNFC 10713, CNFC 10758, CNFC 10813 and CNFC 10716 genotypes, principally about the protein content, cooking time and grain hydration capacity. The CNFC 10716 genotype detached as promissory, because their elevated agronomic performance and satisfactory technological characteristics.
Resumo:
The objective of this work was to evaluate the efficiency of superficial applicationof limestone and slag, and their effects on soil chemical attributes and on yield and mineral nutrition of soybean, maize, and Congo signal grass (Urochloa ruziziensis). The experiment was carried out in a Rhodic Hapludox under no tillage system. The treatments consisted of the use of limestone or slag (silicates of calcium and magnesium) to correct soilacidity, and of a control treatment without the use of soil correctives. Rates were calculated in order to raise soil base saturation up to 70%. Soybean was sown in November 2006and maize in December 2007. Congo signal grass was sown right after the harvests of soybean and maize, and it was cropped during the offseasons. Soil chemical attributes were evaluated at 6, 12, and 18 months after the application of the corrective materials. Slag isan efficient source for soil acidity correction, being able to raise the exchangeable base levels in the soil profile faster than lime. Both limestone and slag increase dry matter yield of Congo signal grass, and grain yield of soybean and maize. Slag is more effective in improving maize grain yield.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)