Life History Aspects of Oxyrhopus trigeminus (Serpentes: Dipsadidae) from Two Sites in Southeastern Brazil

We studied the reproduction, sexual dimorphism, and diet of Oxyrhopus trigeminus from two sites in southeastern Brazil. Oxyrhopus trigeminus from Irape Power Plant (IPP) contained vitellogenic follicles and eggs in both rainy and dry seasons and clutch size was not correlated with female snout vent length (SVL). Sexual dimorphism was evident. Females attain larger SVL but males have longer tails. We found three females from Santa Clara Power Plant (SPP) with vitellogenic follicles, all of them collected in the dry season. Mean SVLs of adult females from IPP and SPP were 717.7 mm and 786 mm, respectively. Mean SVL of adult males from IPP was 553.4 mm and the single adult male from SPP was 507 mm. The diet of O. trigeminus from IPP included rodents (46.7%), lizards (33.3%), and birds (20%). The volume of individual prey items was not correlated with snake SVL. The diet of O. trigeminus from SPP included rodents (37.5%), lizards (37.5%), birds (12.5%), and marsupials (12.5%). It seemed that an ontogenetic shift may occur in individuals of this snake species from IPP.

Taxonomy, Hemipenial Morphology, and Natural History of Two Poorly Known Species of Anadia (Gymnophthalmidae) from Northern South America

Anadia pariaensis Rivas, La Marca, and Oliveros, 1999, and Anadia steyeri Nieden, 1914, are two particularly rare and poorly known lizards described from single specimens. In the case of A. pariaensis, it remains known from the holotype, whereas A. steyeri is known from three additional specimens reported in the literature after the original description of the species. A single new specimen of A. pariaensis and five of A. steyeri, including the first adult males recorded for both species, make possible a more representative description of both species, including descriptions of the hemipenes. Despite both species presenting some similar morphological characteristics, the examination of the hemipenial morphology revealed very different organs. The hemipenis of A. steyeri presents some characteristics that resemble the organs of two species from the Santa Marta Mountain Range in the "bitaeniata-group" (Anadia pulchella and Anadia altaserrania). On the other hand, the hemipenes of A. pariaensis are unique morphologically and cannot be associated with the hemipenes known from other species in the genus. We describe variation within both species, and we comment on possible sexual dimorphism (number and arrangement of the femoral pores), natural history, and the known geographic distribution of the species. We also comment on Anadia bumanguesa Rueda-Almonacid and Caicedo 2004 based on a new specimen, the second known. This species may be a synonym of A. steyeri.

DEVELOPMENT OF MICROSATELLITE MARKERS FOR QUALEA GRANDIFLORA (VOCHYSIACEAE), A TYPICAL SPECIES OF THE BRAZILIAN CERRADO

Premise of the study: Microsatellite primers were developed to investigate genetic diversity and population structure of Qualea grandiflora, a typical species of the Brazilian cerrado. Methods and Results: Eight microsatellite loci were isolated using an enrichment cloning protocol. These loci were tested on a population of 110 individuals of Q. grandiflora collected from a cerrado fragment in Sao Paulo State, Brazil. The loci polymorphism ranges from seven to 19 alleles and the average heterozygosity value is 0.568, while the average polymorphic information content is 0.799. Conclusions: The developed markers were found to be highly polymorphic, indicating their applicability to studies of population genetic diversity in Q. grandiflora

New microsatellite markers for garlic, Allium sativum (Alliaceae)

Premise of the study: A new set of microsatellite or simple sequence repeat (SSR) markers for garlic, an important medicinal spice, was developed to aid studies of genetic diversity and to define efficient strategies for germplasm conservation. Methods and Results: Using a (CT)(8)- and (GT)(8)-enriched library, a total of 16 SSR loci were developed and optimized in garlic. Ten loci were found to be polymorphic after screening 75 accessions. The parameters used to characterize the loci were observed and expected heterozygosity, number of alleles, Shannon Index, and polymorphism information content (PIC). A total of 44 alleles were identified, with an average of 4.4 alleles per loci. The vast majority of loci were moderate to highly informative according to PIC and the Shannon Index. Conclusion: The new SSR markers have the potential to be informative tools for genetic diversity, allele mining, mapping and associative studies, and in the management and conservation of garlic collections.

Assessment of a Neurophysiological Model of the Mandibular Branch of the Facial Nerve in Rats by Electromyography

Objectives: Our objective was to develop an experimental model for the noninvasive and objective evaluation of facial nerve regeneration in rats using a motor nerve conduction test (electromyography). Methods: Twenty-two rats were submitted to neurophysiological evaluation using motor nerve conduction of the mandibular branch of the facial nerve to obtain the compound muscle action potentials (CMAPs). To record the CM APs, we used two needle electrodes that were inserted into the lower lip muscle of the rat. A supramaximal electrical stimulus was applied, and the values of CMAP latency, amplitude, length, area, and stimulus intensity obtained from each side were compared by use of the Wilcoxon test. Results: There was no significant difference (all p > 0.05) in latency, amplitude, duration, area, or intensity of stimuli between the two sides. The amplitudes ranged between 1.61 and 8.30 mV, the latencies between 1.03 and 1.97 ms, and the stimulus intensities between 1.50 and 2.90 mA. Conclusions: This is a noninvasive, easy, and highly reproducible method that contributes to an improvement of the techniques previously described and may contribute to future studies of the degeneration and regeneration of the facial nerve.

Intraoral distalizer effects with conventional and skeletal Anchorage: a meta-analysis

Introduction: The aims of this meta-analysis were to quantify and to compare the amounts of distalization and anchorage loss of conventional and skeletal anchorage methods in the correction of Class II malocclusion with intraoral distalizers. Methods: The literature was searched through 5 electronic databases, and inclusion criteria were applied. Articles that presented pretreatment and posttreatment cephalometric values were preferred. Quality assessments of the studies were performed. The averages and standard deviations of molar and premolar effects were extracted from the studies to perform a meta-analysis. Results: After applying the inclusion and exclusion criteria, 40 studies were included in the systematic review. After the quality analysis, 2 articles were classified as high quality, 27 as medium quality, and 11 as low quality. For the meta-analysis, 6 studies were included, and they showed average molar distalization amounts of 3.34 mm with conventional anchorage and 5.10 mm with skeletal anchorage. The meta-analysis of premolar movement showed estimates of combined effects of 2.30 mm (mesialization) in studies with conventional anchorage and 4.01 mm (distalization) in studies with skeletal anchorage. Conclusions: There was scientific evidence that both anchorage systems are effective for distalization; however, with skeletal anchorage, there was no anchorage loss when direct anchorage was used.

Correction of Class II malocclusion with Class II elastics: a systematic review

Introduction: The aim of this prospective clinical study was to investigate the cephalometric changes produced by bonded spurs associated with high-pull chincup therapy in children with Angle Class I malocclusion and anterior open bite. Methods: Thirty patients with an initial mean age of 8.14 years and a mean anterior open bite of 3.93 mm were treated with bonded spurs associated with chincup therapy for 12 months. An untreated control group of 30 subjects with an initial mean age of 8.36 years and a mean anterior open bite of 3.93 mm and the same malocclusion was followed for 12 months for comparison. Student t tests were used for intergroup comparisons. Results: The treated group demonstrated a significantly greater decrease of the gonial angle, and increase in overbite, palatal tipping of the maxillary incisors, and vertical dentoalveolar development of the maxillary and mandibular incisors compared with the control group. Conclusions: The association of bonded spurs with high-pull chincup therapy was efficient for the correction of the open bite in 86.7% of the patients, with a 5.23-mm (SD, 61.69) overbite increase.

Dentoskeletal changes induced by the Jasper jumper and the activator-headgear combination appliances followed by fixed orthodontic treatment

Introduction: The aim of this study was to compare the dentoskeletal changes of patients with Class II Division 1 malocclusion treated with either the Jasper jumper appliance or the activator-headgear combination, both associated with fixed appliances. Methods: The sample comprised 72 subjects with Class II Division 1 malocclusion divided into 3 groups: group 1 included 25 subjects treated with fixed appliances and the force modules of the Jasper jumper at an initial mean age of 12.72 years, group 2 included 25 subjects treated with the activator-headgear combination followed by fixed appliances at an initial mean age of 11.07 years, and group 3 included 22 untreated subjects at an initial mean age of 12.67 years. Initial cephalometric characteristics and dentoskeletal changes were compared with analysis of variance. Results: Both experimental groups had similar dentoskeletal changes: restrictive effect on the maxilla, clockwise mandibular rotation and a slight increase in anterior face height, retrusion of the maxillary incisors, distalization of the maxillary molars, protrusion of the mandibular incisors, extrusion of the mandibular molars, and significant improvements of the maxillomandibular relationship, overjet, overbite, and the molar relationship. Conclusions: The effects of the Jasper jumper and the activator-headgear combination followed by fixed orthodontic appliances were similar in Class II malocclusion treatment.

Push-out bond strengths of different dental cements used to cement glass fiber posts

Statement of problem: Since the introduction of glass fiber posts, irreversible vertical root fractures have become a rare occurrence; however, adhesive failure has become the primary failure mode. Purpose: The purpose of this study was to evaluate the push-out bond strength of glass fiber posts cemented with different luting agents on 3 segments of the root. Material and methods: Eighty human maxillary canines with similar root lengths were randomly divided into 8 groups (n=10) according to the cement assessed (Rely X luting, Luting and Lining, Ketac Cem, Rely X ARC, Biscem, Duo-link, Rely X U100, and Variolink II). After standardized post space preparation, the root dentin was pretreated for dualpolymerizing resin cements and untreated for the other cements. The mixed luting cement paste was inserted into post spaces with a spiral file and applied to the post surface that was seated into the canal. After 7 days, the teeth were sectioned perpendicular to their long axis into 1-mm-thick sections. The push-out test was performed at a speed of 0.5 mm/min until extrusion of the post occurred. The results were evaluated by 2-way ANOVA and the all pairwise multiple comparison procedures (Tukey test) (?=.05). Results: ANOVA showed that the type of interaction between cement and root location significantly influenced the push-out strength (P<.05). The highest push-out strength results with root location were obtained with Luting and Lining (S3) (19.5 ±4.9 MPa), Ketac Cem (S2) (18.6 ±5.5 MPa), and Luting and Lining (S1) (18.0 ±7.6 MPa). The lowest mean values were recorded with Variolink II (S1) (4.6 ±4.0 MPa), Variolink II (S2) (1.6 ±1.5 MPa), and Rely X ARC (S3) (0.9 ±1.1 MPa). Conclusions: Self-adhesive cements and glass ionomer cements showed significantly higher values compared to dual-polymerizing resin cements. In all root segments, dual-polymerizing resin cements provided significantly lower bond strength. Significant differences among root segments were found only for Duo-link cement.

Influence of technique and manipulation on self-adhesive resin cements used to cement intraradicular posts

Statement of problem: Resin cements are widely used to cement intraradicular posts, but bond strength is significantly influenced by the technique and material used for cementation. Purpose: The purpose of this study was to evaluate the bond strength of 3 self-adhesive cements used to cement intraradicular glass fiber posts. The cements all required different application and handling techniques. Material and Methods: Forty-five human maxillary canines were selected and randomly divided into 3 groups n= 15 by drawing lots: Group BIS – Biscem, Group BRE – Breeze, and Group MAX – Maxcem. Each group was divided into 3 subgroups according to application and handling techniques: Sub-group A – Automix/Point tip applicator, Sub-group L – Handmix/Lentulo, and Sub-group C – Handmix/Centrix. Cementation of the posts was performed according to the manufacturers’ instructions. The push-out test was performed with a crosshead speed of 0.5 mm/min, and bond strength was expressed in megapascals. The results were evaluated by 2-way ANOVA and the all pairwise multiple comparison procedures (Tukey test) (?=.05). Results: Breeze cement showed the highest average for the subgroups A, L, and C when compared to the Biscem cement and Maxcem Elite (P<.05). Statistically significant differences among the subgroups were only observed for Biscem. Conclusions: This study shows that application and handling techniques may influence the bond strength of different self-adhesive cements when used for intraradicular post cementation.

Research and theory driven insights: ten suggestions for L2 reading instruction

[EN]Research and theory on second language reading has reached heightened dimensions in recent years. It is through reading that learners access much information concerning the target language and culture, and consequently reading is an important part of almost all language programs across stages of acquisition. The purpose of this article is to offer informed suggestions for the foreign language instructor of reading. The ideas given in this paper constitute a collaborative project that developed as part of a graduate seminar on L2 Reading and Writing taught at Washington University in St. Louis.

Organ-specific eosinophilic disorders of the skin, lung, and gastrointestinal tract

Eosinophils are multifunctional leukocytes that increase in various tissues in patients with a variety of disorders. Locally, they can be involved in the initiation and propagation of diverse inflammatory responses. In this review the clinical association of eosinophils with diseases of the skin, lung, and gastrointestinal tract is summarized. An approach to determining the causal role of eosinophils in these diseases is presented. Recent findings concerning molecular diagnosis, cause, and treatment are discussed.

Four-arm robotic lobectomy for the treatment of early-stage lung cancer

We investigated the feasibility and safety of four-arm robotic lung lobectomy in patients with lung cancer and described the robotic lobectomy technique with mediastinal lymph node dissection.

Clinical and microbiological findings at sites treated with orthodontic fixed appliances in adolescents

INTRODUCTION: Fixed orthodontic appliances can alter the subgingival microbiota. Our aim was to compare the subgingival microbiota and clinical parameters in adolescent subjects at sites of teeth treated with orthodontic bands with margins at (OBM) or below the gingival margin (OBSM), or with brackets (OBR). METHODS: Microbial samples were collected from 33 subjects (ages, 12-18 years) in treatment more than 6 months. The microbiota was assessed by the DNA-DNA checkerboard hybridization method. RESULTS: Bacterial samples were taken from 83 OBR,103 OBSM, and 54 OBM sites. Probing pocket depths differed by orthodontic type (P <0.001) with mean values of 2.9 mm (SD, 0.6) at OBSM sites, 2.5 mm (SD, 0.6) at OBM sites, and 2.3 mm (SD, 0.5) at OBR sites. Only Actinomyces israelii (P <0.001) and Actinomyces naeslundii (P <0.001) had higher levels at OBR sites, whereas Neisseria mucosa had higher levels at sites treated with OBSM or OBM (P <0.001). Aggregatibacter actinomycetemcomitans was found in 25% of sites independent of the appliance. CONCLUSIONS: Different types of orthodontic appliances cause minor differences in the subgingival microbiota (A israelii and A naeslundii) and higher levels at sites treated with orthodontic brackets. More sites with bleeding on probing and deeper pockets were found around orthodontic bands.