功能高分子膜离子选择电极研究

功能高分子是新近开发的离子选择电极活性材料。本文叙述了功能高分子膜离子选择电极的发展和现状，叙述了交流阻抗等方法在离子选择电极研究中的应用，从下面几个方面研究了功能高分子膜离子选择电极：1．用热压方法研制了功能高分子为活性物的PVC膜氯离子选择电极，探索了膜制备方法，测试了电极性能。2．用相敏检波法测试了压片PVC膜氯离子选择电极的交流阻抗行为（改变膜活性物用量、电极面积和厚度、溶液离子浓度、温度等条件）。频率范围10~4-1Hz。在所有情况下，复平面阻抗图上为一个近似完整的半园，等效于RC并联线路，呈现膜主体离子传输过程的势垒阻抗。计算了相应条件下的膜直流电阻R_∞、膜主体电容C_g，时间常数τ以及离子传输活化能E_α等膜电化学参数，讨论了膜电荷传输机理。3．用恒电位逐点测试和慢扫描法测定了电极的稳态极化曲线，计算了不同条件下的电极交换电流i°，反应电阻Rr，根据电化学极化方程式讨论了电极的稳态极化特性，探讨了电极在外加电压下的电流响应行为，讨论了电极零电位电流的分析特性。4．用快速三角波电位扫描法和快速方波电位法测试了电极的暂态响应行为，根据电流－时间曲线及电位－时间曲线计算了电极的有关电化学参数，讨论了膜电极的电流分析特性。5．探讨了电极活化过程的动力学行为，测试了膜电极电阻－时间曲线（R－t曲线），归纳了R-t曲线的经验公式，用离子在膜中的扩散解释R-t曲线，理论与实验结果吻合。

取代环戊二烯基稀土有机氯化物的合成及其反应

本文通过无水LnCl_3(Ln = Pr.Nd.Gd)与两倍摩尔的叔丁基环戊二烯基碱金属盐在THF中60－80℃反应，分离到一类新的二（叔丁基环戊二烯基）稀土氯化物（T-DuCp）_2 2net.nTHF (Ln = Pr,Nd,n = 2 Ln = Gd,n = 1)，对它们进行了元素分析。红外光谱及水鲜色质谱的表征。对于配合物（t-BuCp）_2PrCl·2THF的单晶，测定了它的晶体结构，晶体层单斜晶系P21/C空间群，晶胞参数为：a = 15.080 b = 8.855 c = 21.196A, β = 110.34°V = 2653.9A~3 δ = 4，结构分析表明此配合物是一中性的单分子配合物。最后的R = Rw = 0.058平均Pr-C.2.81 Pr-Cent 2.53A, Pr-Cl及Rr-O键长分别为2.72与2.62A。本文通过Lnel_3(Ln = Nd.Pr.Ga)与等摩尔的叔丁基环戊二烯基碱金属盐在THF中60－80℃反应，分离到一类中性的单(叔丁基环戊二烯基)稀土二氯化物，并对它们进行了元素分析，红外光谱及水鲜色质谱的表征。本文通过轻稀土元素La,Pr的三氯化物与带基钠以1:2摩尔比在THF中70－80℃反应，分离到了二带基轻稀土氯化物（CaH_7）_2LaCl.2THF及[(CqH_7)_2PrCl.THF]_2。并且对此二配合物进行了元素分析。红外光谱及水鲜色质谱的表征。对于[(CuH_7)_2PrCl.TH]_2配合物，测定了它的晶体结构，这是第一个得到结构表征的茚基稀土氯化物，晶体层于单斜晶系，P_(21)/C空间群，晶胞参数为a = 7.808 b = 17.796 c = 14.070A β = 93.97°v = 1950.31A. E = 2最后的R = 0.045. Rw = 0.039结构分析表明此配合物以中性的二聚体形式存在。平均的Pr-C.2.81 Pr-Cent 2.53. Pr-Cl.2.84H Pr-O钻长2.54A。为了进一步研究不同配体对配合物结构的影响，我们还研究了Gael_3与Nae_5Mes以1:1摩尔比在THF中的反应，分离到了两种配合物[(NaTHF)(C_5MesGd.THF)_2Cl_5]_2.6THF(I)及L_5Me_5GdCl2.3THF(II)并且对配合物（I），测定了它的晶体结构，晶体层于三斜晶系。Pi空间群。晶胞参数a = 12.183 b = 13.638 c = 17.883A, α = 110.38 β = 94.04 γ = 99.44°, V = 2721.20A, E = 1。结构分析表明，此配合物是一种以两个Na原子通过THF中的O原子而桥联的金层有机配合物，在结构上有十分新颖的特点。在此配合物分子中含有四个Gd原子及二个Na原子，Na及Gd间以Cl桥键相联结，Gd-Gd_2 = 4.033 Gdll-Na = 2.818A。最后的R = 0.04M Rw = 0.042。本文还对（t-BuCp）_2P_2Cl.2THF与NaH及LiAlH4的反应进行了初步的研究，分离到（t-Bucp）_2PrH.2THF及(t-Bucp)_2P_2RIH_4.3THF两种新的氢化物，并且对它们进行了元素分析，红外光谱的表征，对于它们水鲜产物的气相分中的H_2，用气相色谱法进行了定性表征。

对金属稀土金属有机配合物的合成、结构及催化性质研究

合成出三类18种双金属稀土金属有机配合物：第一类：Ln-Li双金属π－烯丙基稀土配合物－LiLn(π-C_3H_5)_4 nD(Ln=La、Tb, n=3; Ln=Y、Dy, n=2.5; Ln=Ce、Pr、Nd、Sm、Gd、Er, n=2; D=二氧六环）。第二类：Ln-Mg双金属π－烯丙基稀土配合物-(π-C_3H_5)_2CnCl_5Mg_2(tmed)_2 (Ln=Ce、Nd)和(π-C_4H_7)_2LnCl_5Mg_2(tmed)_2 (Ln=La、Ce、Nd; C_4H_7=i-C_4H_7)。第三类：Ln-Al双金属配合物－[(CF_3CO_2)_3LnHAlR_2·2THF]_2 (Ln=Y、Nd, R=i-Bu; Ln=Eu, R=Et)。用四园X－ray衍射仪在低温下测定了LiCe(π-C_3H_5)_4·4D、[(CF_3CO_2)_3YHAl(i-Bu)_2 2THF]_2、[(CF_3CO_2)_3NdHAl(i-Bu)_2 2THF]_2和[(CF_3CO_2)_3EuHAlEt_2·2THF]_2的晶体结构。对[(CF_3CO_2)_3YHAl(i-Bu)_2·2THF]_2和LiLn(π-C_3H_5)_4 nD类配合物进行了较详细的NMR研究。二维C－H相关NMR谱表明在[(CF_3CO_2)_3YHAl(i-Bu)_2·2THF]_2配合物中6个CF_3CO_2~-有2个羰基的C与H成键，该结果解释了Ln-Al双金属配合物中相应羰基的非平面结构现象。研究表明LiLn(π-CC_3H_5)_4·nD可催化异戊二烯和苯乙烯均聚合；不同配合物中均以Y配合物的活性为最高。(π-C_3H_5)_2CeCl_5Mg_2(tmed)_2对异戊二烯、丁二烯、苯乙烯以及甲基丙烯酸甲酯（MMA）的聚合有较低的催化活性；(π-C_4H_7)_2LnCl_5Mg_2(tmed)_2也对苯乙烯和异戊二烯的聚合有一定的催化活性。分别以LiCe(π-C_3H_5)_4·4D和(π-C_3H_5)_2CeCl_5Mg_2(tmed)_2作为稀土配位催化剂的模型配合物，研究了其催化所得聚异戊二烯的端基结构。表明聚合物均具有烯丙基端基(-CH_2-CH=CH_2)。证明单体在Ce~(3+)和π－烯丙基之间发生了插入反应，聚合按π－烯丙基机理进行。该结果首次为稀土配位催化共轭双烯烃聚合的活性链端π－烯丙基机理提供了直接的实验证据。(π-C_3H_5)_2CeCl_5Mg_2(tmed)_2-Al(i-Bu)_3(Al/Ce(摩尔比)=4))体系对异戊二烯的聚合具有较高的催化活性，所得聚合物仍具有－CH_3-CH=CH_2端基，而没有i-Bu端基。该结果又一次为上述π-烯丙基机理提供了直接的实验证据。发现Ln(CF_3CO_2)_3-AlEt_3体系可催化THF开环聚合。首次实现稀土催化THF开环聚合。研究了Y(CF_3CO_2)_3-HAl(i-Bu)_2-ECH（环氧氯丙烷）体系催化THF开环聚合法性及聚合机理。讨论了各种聚合条件对该体系催化活性的影响。研究了[(CF_3Co_2)YHAl(i-Bu)_2·2THF]_2在ECH存在下催化THF聚合活性并认为该双金属配合物为Y(CF_3CO_2)_3-HAl(i-Bu)_2-ECH体系的活性体。[(CF_3CO_2)_3YHA(i-Bu)_2·2THF]_2和[(CF_3CO_2)_3EuHAlEt_2·2THF]_2均可催化ECH和MMA聚合，所得PMMA的间同(rr)含量可达76.5％。

丰中子奇异核17B的实验研究

在兰州重离子加速器国家实验室(HIRFL)放射性次级束流线(RIBLL)上，用束流透射法测量了丰中子奇异核17B与C靶反应的总截面.假定17B具有15B(核芯)＋2n结构，采用Gauss＋HO形式的密度分布和零力程Glauber模型进行计算的结果可以很好地拟合实验数据，并得出17B的密度分布有一个很大的弥散，表明17B是双中子晕核.

Configuration of the valence neutrons of B-17

The reaction cross section of B-17 on C-12 target at (43.7 +/- 2.4) MeV/u has been measured at the Radioactive Ion Beam Line in Lanzhou (RIBLL). The root-mean-square matter radius (R-rms) was deduced to be (2.92 +/- 0.10) fm, while the R-rms of the core and the valence neutron distribution are 2.28 fm and 5.98 fm respectively. Assuming a "core plus 2n" structure in B-17, the mixed configuration of (2s(1/2)) and (1d(5/2)) of the valence neutrons is studied and the s-wave spectroscopic factor is found to be (80 +/- 21)%.

Fast simulation of the forward tracking detector of HPLUS

The necessity of installing a forward tracking detector stack is discussed for the Hadron Physics LanzhoU Spectrometer(HPLUS). A local tracker is developed to solve the multi-track finding problem. The track candidates are searched iteratively via Hough Transform. The fake tracks are removed by a least square fitting process. With this tracker we have studied the feasibility of pp -> pp + phi(-> K+K-), a typical physical channel proposed on HPLUS. The single track momentum resolution due to the uncertainty of the positioning in FTD is 1.3%. The multiple scattering effect contributes about 20% to the momentum resolution in the FTD coverage. The width and the signal-to-background ratio of the reconstructed phi are 1.51 MeV and 4.36, respectively, taking into account the direct Kaon channel pp -> pp + K+K- as background. The geometry coverage of FTD for phi events is about 85.4%. Based on the current fast simulation and estimation, the geometrical configuration of FTD meets the physical requirement of HPLUS under the current luminosity and multiplicity conditions. The tracker is applicable in the full simulation coming next and is extendable to other tracking component of HPLUS.

Isospin effect of projectile fragment yields

Isospin asymmetry is very important in the nuclear equation of state (EOS), isotope yield from the projectile fragments can give information of the reaction process. In this paper projectile fragment yields are measured in the collision Ar-36,Ar-40 + Ni-64 at incident energy 50 MeV/u with different isospin asymmetry project Ar-36,Ar-40, data analysis, particle identification and event selection are described. Isotope yields are compared in these two reactions, and axe also compared with the empirical parametrization of fragmentation cross-section calculated by EPAX.

Property measurement of the CsI(Tl) crystal prepared at IMP

Large-sized CsI (Tl) single crystals, similar to phi 100 mm x 350 mm, have been grown successfully, and this CsI(Tl) coupled with PD has been successfully utilized at RIBLL (the Radioactive Ion Beam Line in Lanzhou) to measure the energy of heavy ions as a stopping detector. The performances of CsI(Tl) detector coupled with PD and APD have been tested and compared, including the temperature dependence of scintillating light yield

Hadron physics programs at HIRFL-CSRm: Plan and status

An internal target experiment at HIRFL-CSRm is planned for hadron physics, which focuses on hadron spectroscopy, polarized strangeness production and medium effect. A conceptual design of Hadron Physics Lanzhou Spectrometer (HPLUS) is discussed. Related computing framework involves event generation, simulation, reconstruction and final analysis. The R&D works on internal target facilities and sub-detectors are presented briefly.

Temperature effects of CsI(Tl) crystal detector with APD readout

The temperature dependences of the light output of CsI(Tl) crystal grown at IMP and of the gain of the Hamamatsu S8664-1010 avalanche photodiode (APD) have been investigated systematically. The light output of the CsI(Tl) crystal increases with temperature by 0.67%/degrees C in the region from -2 degrees C to 8 degrees C, and by 0.33%/degrees C in the region from 8 degrees C to 25 degrees C, while the gain of the tested APD decreases by -3.68%/degrees C (working voltage 400V) on average in the room temperature range. The best energy resolution 5.1% of the CsI(Tl) with APD was obtained for the 662keV gamma ray from Cs-137 radiation source.

Construction and test of Wien-filter combined with RIBLL

A recoil separator Wien-filter which was developed for the Radioactive Ion Beam Line in Lanzhou (RIBLL) as an extension is described. It consists of 2 quadruple triplets and a standard Wien-filter. It was designed for study of the fusion-evaporation reactions. The overall design, background suppression, the transmission efficiency, the angular acceptance and the momentum acceptance have been described. All the performances fulfil the designed requirements. Based on the test results, with some modifications the investigations of the nuclei with Z <= 110 and the drip-line nuclei in the medium-heavy mass region can be carried out with this facility.

Study of the mechanism for synthesizing superheavy nuclei based on dinuclear system

Based on the concept of dinuclear system, considering the strong competition between fusion and quasiffision processes, by solving the master equation numerically to calculate the fusion probability of superheavy nuclei, we have estimated the excitation functions for the reactions Ti-50, Fe-58 + Pb-208, Bi-209, and the experimental data are basically reproduced. For different incident energies and different angular momentum, the effects on fusion and survival probability and the contribution to evaporation residue cross section have been given. These results help to further understand the mechanism for, synthesizing superheavy nuclei.

A transverse field gas ionization chamber performed at RIBLL

A transverse field gas ionization chamber as Delta E detector at the Radioactive Ion Beam Line in Lanzhou (RIBLL) is described. A high detection efficiency and long plateau are achieved with the mixed gas Ar(80%)+CO2(20%). The energy resolution is 3.25% for 4.94MeV alpha particle. This ionization chamber has been tested in the experiment with 50MeV/u Ni-58 bombarding Ta at RIBLL. All the fragments can be identified clearly by the ionization chamber.