Diseño de instrumentos para configurar una política industrial en España basada en los postulados de la economía evolutiva

La evidencia empírica aplicada a países de cierto tamaño y desarrollo económico, muestra que existe una relación directa y positiva entre la intensidad de la industria manufacturera, medida como porcentaje de su PIB, y ciertas variables económicas como, el crecimiento, el desempleo y la balanza exterior de bienes y servicios. En el caso de esta última, se verifica empíricamente, que los países con una proporción de actividad manufacturera inferior al 20%, tienen una marcada tendencia a presentar déficits crónicos de balanza de bienes y servicios, lo que conduce a persistentes déficits por cuenta corriente, al ser el primer déficit el principal componente del segundo. Esto trae consigo un continuado incremento del endeudamiento externo que no cesa, y que terminará en algún momento por desequilibrar el conjunto de la economía de los países con esos déficits crónicos. Las anteriores conclusiones, abren una vía de orientación de la política económica, que tiene como objetivo la promoción de la industria manufacturera de cada país. Y esto es un hecho ya en 2014. Países relevantes, como Alemania o Francia en la UE, incluso los EEUU y últimamente el Reino Unido, y por supuesto países del área asiática como Japón, Corea del Sur y China, llevan años promoviendo su industria manufacturera. Resulta significativo, que el debate ideológico sobre la bondad de la aplicación política industrial por parte de los gobiernos, frente a las teorías liberales de mantener a los poderes públicos lejos de ese tipo de actividades, haya dado paso a un modelo generalizado de corte más bien horizontal, donde los países casi sin excepciones apoyan el desarrollo de sus empresas con numerosos instrumentos, que van bastante más lejos de los habituales de I+D. Se valora por tanto, la industria manufacturera como algo vital para el equilibrio económico. Incluso la UE, defensora durante décadas de la no intervención de los diferentes Estados miembros en actividades de promoción industrial más allá del apoyo a las actividades de I+D, realiza un giro copernicano, que termina en 2012 proclamando que la industria manufacturera es vital para el equilibrio económico de la UE, que hay que promoverla, e incluso marca un objetivo, precisamente del 20%, como contribución manufacturera a su PIB. Es decir, se da por asumido que los servicios no son un sustituto indefinido de la industria y que por tanto tienen un límite, lo que se contrapone frontalmente contra la anterior creencia de que el aumento de la participación de los servicios en la economía, no solo era bueno, sino un síntoma de desarrollo. Esta premisa ya ha dejado de ser cierta para esos y otros países. En cambio, en España nada de esto sucede en las dos últimas décadas, sino que la industria manufacturera no recibe especial atención de los poderes públicos y se desliza en una pendiente de disminución de su contribución al PIB, que incluso se acelera con la crisis económica que comienza en 2007, hasta alcanzar cifras del orden del 12% del PIB en 2013. La política económica que se aplica es la de la deflación de costes, con los efectos consecuentes sobre los salarios y sobre la capacidad de la economía de generar riqueza. Se apuesta por un modelo de mano de obra barata, que recuerda al de los años 60. Como indicador relevante de esta situación, lo que exporta la industria manufacturera española, no ha ganado en contenido tecnológico en los últimos quince años. Esta situación se ve empeorada por un hecho significativo adicional, y es que casi el 40% de las ventas de la industria manufacturera española provienen de empresas de propiedad extranjera, con lo que eso supone por una parte de dependencia tecnológica del exterior como en el caso del automóvil, y de incertidumbre sobre su futuro, al estar basadas en el mantenimiento en el futuro de una mano de obra barata, que frenará que los españoles que trabajan en esas empresas, progresen económicamente. La propuesta de esta Tesis, es en cambio apostar por un modelo de crecimiento para España que tenga como uno de sus pilares el desarrollo de una industria manufacturera sólida y con cada vez mayor contenido tecnológico. Para ello, se propone un Plan de política industrial, donde se incluye la creación de actores impulsores de este plan, que deben ser del máximo nivel político. Si los diferentes gobiernos no entienden y asumen esta necesidad de apoyo a la industria a largo plazo e independiente de los cambios políticos, no será posible llevar a cabo este Plan. Para su puesta en marcha, se propone la creación o refuerzo de numerosos instrumentos de apoyo a la industria manufacturera de carácter fundamentalmente horizontal que van mucho más allá de los habituales del I+D, y que en varios casos, tienen una clara semejanza con otros existentes ya en otros países desarrollados desde hace años. La promoción de la industria manufacturera necesita nuevos instrumentos, como una financiación a largo plazo para las empresas, una promoción ordenada y eficaz de la actividad internacional de las empresas exportadoras, la mayoría de las cuales exportan productos manufacturados, una educación y formación profesional que esté alineada con estos objetivos, unos instrumentos que apoyen en especial el desarrollo la industria manufacturera, o la participación minoritaria pero significativa, del Estado en empresas españolas pertenecientes a sectores estratégicos entre otros. En resumen, esta Tesis propone una alternativa de política económica radicalmente diferente a la de dejar la industria manufacturera española a su suerte, y basar el futuro económico de España en una mano de obra barata. ABSTRACT The empirical evidence, applied to countries of certain size and economic development, shows that there exists a direct and positive relationship between industrial manufacturing activity, measured as a percentage of GDP, and certain economic variables, such as growth, unemployment and the foreign balance of trade. In the case of the latter, it is verified empirically that the countries with a percentage of manufacturing activity below 20% have a marked tendency for chronic deficits of the balance of trade, leading to persistent deficits in the current account, being that the former deficit is the main component of the latter. This brings about a continued increase in foreign debt that does not cease, and that will end at some point by disrupting the economy of the countries with these chronic deficits. The previous conclusions open the way to a new direction for economic policy, which promotes industrial manufacturing in each country. This is already a fact in 2014. Relevant countries, such as Germany or France in the EU, even the US and ultimately the UK, and of course countries of East Asia such as Japan, South Korea and China, have been promoting their industrial manufacturing for years. It becomes significant that the ideological debate about the goodwill of the application of industrial policy by governments, against liberal theories that maintain public powers far from these kinds of activities, has taken a step towards a horizontal-cut generalized model, where countries, with almost no exception, rely on various instruments to develop their companies that go much further than the usual R&D. Industrial manufacture is therefore valued as vital for economic stability. Even the EU, proponent for decades of non-intervention policy that goes beyond R&D, has gone full circle, ending in 2012 by proclaiming that industrial manufacture is vital for the economic stability of the EU, that it must be promoted. They even mark precisely 20% as an objective for manufacturing as a percentage of GDP. In other words, it is a given that services are not an indefinite substitute for industry, and that therefore it has a limit as such. This rejects the notion that the increase in services at the cost of manufacture is not only healthy, but is also a symptom of development. This premise is no longer true for these and other countries. On the other hand, none of this happens in Spain, where industrial manufacture receives no special attention from the public authorities, and it slides on a downward slope of percentage contribution to GDP, which accelerates the economic crisis that begins in 2007, until manufacture reaches values of around 12% of GDP in 2013. The economic policy applied is that of cost deflation, with consequential effects on wages and the capacity of the economy to generate wealth. A model is proposed for cheaper labor, akin to that of the 1960s. As a relevant indicator of this situation, manufacturing exports from Spain have not grown technologically in the last 15 years. The situation is made worse by another significant fact: almost 40% of sales of the manufacturing industry originate from companies of foreign origin, which supposes on one hand a technological dependence on foreign countries, such as in the case of the automotive industry, and on the other hand uncertainty in its future, being that they are based on maintaining cheap labor in the future, which will slow economic progress of Spaniards working in these companies. The proposition of this Thesis is to bet on a growth model for Spain that has as one of its pillars the development of a solid manufacturing industry, with increasing technological content. For this, an industrial policy plan is proposed, which includes the creation of driving agents for this plan, which must be of maximum political level. If the various governments don’t understand and assume this necessity for support of industry in the long term, independent of political change, this plan will not be accomplished. To start it, the creation or reinforcement of numerous instruments to promote the manufacturing activities are proposed, with a fundamentally horizontal nature that goes far beyond the usual R&D, and that, in several cases, have a clear similarity with others existing in other countries, having been developed for years. The promotion of the manufacturing industry needs new instruments, such as the long-term financing of companies, an orderly and efficient promotion of international activity of exporting companies, the most of which export manufactured goods, education and professional training which is in tune with these objectives, some instruments which support in particular the development of the manufacturing industry, or the minor yet significant participation of the State in Spanish companies belonging to strategic sectors, among others. In summary, this Thesis proposes an different alternative to the economic policy of leaving the manufacturing industry of Spain to its chances, and to base the economic future of Spain on a cheaper labor force.

Developing transferable skills through academic motivation activities

The purpose of this study is to work out how a clear and motivated task goal set for the students can develop several skills that are not only useful in their specific academic contexts but also serve to reinforce links and cooperation with the labor market. The following research on skills was taken during one academic year. The students collected advertisements likely to be selected in a near future by themselves as possibilities to apply for a job. The advertisements selected were 120, and all of them were published on the internet either in jobs links or located by the students themselves in the web-practices of their choice. All the advertisements chosen by the students provided us with a skill list focused on architectural profiles. To conclude, academic research skills versus future motivation jobs positions are fruitful paths to conduct successful students´response at job interviews.

Sobre la forma de garantizar la trazabilidad metrológica en los sistemas hospitalarios

Dentro del equipamiento que existen en los hospitales, se realizan muy diversas actuaciones para el correcto funcionamiento de los equipos que se destinan, tanto a medir sobre el paciente o para tratamiento sobre estos mismos, el abanico de equipos que existen es muy grande, sin contar con los que directamente se instalan o, más correctamente, se implantan en el paciente. Los hospitales tienen establecidas pautas de mantenimiento tanto correctivo como preventivo, también de verificación relativa a seguridad y, en algunos casos, acciones que van destinadas a comprobar las magnitudes en los equipos. Esto último no es lo normal, de hecho, en muchos casos, la mayoría, se desconoce cómo poder comprobar que las magnitudes de un equipo se pueden trazar a un patrón de medida nacional. La investigación se ha desarrollado para determinar, siendo algo que esta patente hasta en la normalización ISO, que no existen para muchos equipos principios establecidos para garantizar la trazabilidad metrológica da las magnitudes físicas en las que trabaja durante su vida útil. Debido a la amplitud de este campo, el desarrollo de investigación se ha llevado en un formato piramidal, desde las necesidades para poder llegar a un estudio concreto de equipos concretos (Termómetros Clínicos, Tensiómetros, Ultrasonidos y Onda Corta). Para llegar a estos se ha realizado un estudio de cómo se encuentra la trazabilidad metrológica en todo el espectro, desde la gestión hasta llegar a casos particulares. Estudiando la gran cantidad de documentación existente y llegando a determinar el campo de trabajo en la metrología hospitalaria, clasificando los equipos y determinando como se encuentran definidos los métodos que llevan a realidad la trazabilidad metrológica, en la normalización. Un grupo no muy trabajado de los equipos electromédicos son los que se encuentran dentro de los tratamientos de Rehabilitación de traumatología, siendo equipos de uso muy habitual en los centros de salud para las lesiones musculares y óseas. A este asunto se ha dedicado un esfuerzo extra, con un reporte histórico de su origen y en qué punto se encuentran ahora. Se han estudiado dentro de estos equipos los de tratamiento de ultrasonidos, de diatermia y onda corta, que son los más representativos de los equipos destinados a electro terapia, pero hay que tener en cuenta que hay campos que se han mencionado globalmente de la rehabilitación, como son la terapia o la biomecánica, de forma similar a otras tecnologías sanitarias de otras especialidades (radiología o análisis clínico). Hay, también, dentro de la terapia, todos esos tratamientos propios de gimnasio, como son poleas, pesas, mesas de masajes, balones, etc… Que su metrología es sencilla, son equipos que existen medios de comprobación de las magnitudes que utilizan por la existencia en otras actividades de la industria (balanzas, pesas, etc). La investigación realizada ha pretendido evaluar todo el global y llegar a casos concretos para determinar cómo está la situación. Llegando a desarrollar una clasificación de equipos y de normas, que permiten vislumbrar las necesidades metrológicas y permitiría establecer una Gestión de la Trazabilidad Metrológica, concluyendo en el estudio para los equipos que se han mencionado. ABSTRACT Within the equipment that exist in the hospitals, there are very diverse performances for the correct operation of the equipment that is intended both to measure on the patient or for treatment on these same, the range of equipment available is very large, without which directly are installed or, more correctly, are implanted in the patient. The hospitals have established patterns of maintenance both corrective and preventive, also of verification of security and, in some cases, actions which are intended to check the magnitudes in the equipment. This last is not normal, in fact, in many cases, the majority, it is not known as to be able to check that the magnitudes of a computer can be traced to a pattern of national measure. The research has been developed to determine, is something that this patent up to the International Organization for Standardization (ISO), that do not exist for many teams established principles to ensure the metrological traceability gives the physical quantities in which they work during its useful life. Due to the breadth of this field, the development of research has been conducted in a pyramid format, from the needs to be able to reach a specific study of specific equipment (Clinical Thermometers, Tensiometers, Ultrasound, and Short Wave). To reach theme, has been carried out a study of how is the metrological traceability across the entire spectrum, from the management to individuals cases. Considering the large amount of existing documentation and arriving to determine the labor camp in the metrology hospital, sorting equipment and determining how are defined the methods that lead to reality the metrological traceability, in the standardization. A group not too worked for medical electrical equipment are found within the rehabilitation treatment of traumatology, being equipment of very common use in the health centers for muscle injuries and bone. In this matter has been dedicated an extra effort, with a report history of its origin and where they are now. We have studied within these teams about the treatment of ultrasound, diathermy, short wave, which are the most representative of the equipment that is destined to electro therapy, but it must be borne in mind that there are fields that have been mentioned globally of rehabilitation, as are the therapy or the biomechanics, similar to other health technologies from other specialties (radiology or clinical analysis). There is, also, within the therapy, all these treatments own gym, such as pulleys, weights, tables of massages, balls, etc… that its metrology is simple, are computers that there are means of verification of the magnitudes that used by the existence in other activities of the industry (scales, weights, etc). The research carried out has tried to assess the entire global and reach specific cases to determine the situation as it is. Arriving in the development of a classification of equipment and standards, which give us a glimpse of the metrological needs and establish a Management of the Metrological Traceability, concluding in the study for computers that have been mentioned.

Business, development and inclusive supply chains. Exploring pathways for the sustainable incorporation of the poor as suppliers in agrifood supply chains

El panorama global está cambiando, y esto influye sobre la forma en la que entendemos y tratamos de alcanzar un desarrollo humano sostenible. El crecimiento de la población conlleva una mayor presión sobre los recursos, pero también supone una mayor cantidad de mano de obra y de talento; la concentración en áreas urbanas está cambiando las dinámicas sociales y desafiando los canales de comercialización tradicionales, pero también genera nuevos mercados y fomenta la innovación; los cambios en la economía global están reduciendo los tradicionales desequilibrios de poder entre los países occidentales y el resto del mundo; y las crecientes interconexiones crean nuevos riesgos pero también oportunidades para lanzar iniciativas de alcance global. Todas estas tendencias nos están obligando a repensar qué es el desarrollo humano y de qué manera deberíamos afrontar el reto de la pobreza. Es comúnmente aceptado que la globalización implica interdependencia y que, para conseguir un desarrollo humano sostenible, la colaboración entre actores de distintos ámbitos es necesaria. Se observa una creciente convergencia de temas, intereses y soluciones en torno al desarrollo sostenible, incluso en diferentes países y sectores, lo que está facilitando la colaboración estratégica entre empresas, gobiernos y sociedad civil. Existen pocas duda a día de hoy sobre el papel fundamental que las empresas deben desempeñar en la transición mundial hacia la sostenibilidad ambiental y la erradicación de la pobreza. Las empresas están evolucionando desde un enfoque tradicional centrado en la maximización de beneficios económicos hacia un enfoque holístico que integra la sostenibilidad y la responsabilidad social como parte del núcleo de negocio de las compañías. En el ámbito medioambiental, muchas empresas ya han comenzado a actuar y tratan de reducir sus emisiones, sus desechos y su consumo de energía. Sin embargo la contribución de las empresas a la reducción de la pobreza no está tan clara. Actualmente en torno a 1,2 miles de millones de personas viven en situación de extrema pobreza. La mayoría de estas personas aún vive en zonas rurales donde la mayor parte de la población activa trabaja en el sector agrícola. Por lo tanto, mejorar las oportunidades y reducir los riesgos de los productores más vulnerables en el sector de la agricultura puede ser un motor de desarrollo rural y reducción de la pobreza, especialmente en países de bajo nivel de desarrollo cuyas economías están fundamentalmente basadas en la agricultura. Algunas empresas comienzan a incluir a los pobres en sus operaciones como consumidores, proveedores y emprendedores. Esta tesis se centra en las potenciales oportunidades relacionadas con la incorporación sostenible de los pobres como proveedores de productos y/o de mano de obra. La colaboración entre empresas y productores vulnerables de países en desarrollo es un tema relativamente nuevo y todavía poco estudiado. La pregunta que guía esta tesis es: “¿Cómo pueden las empresas facilitar la inclusión sostenible en cadenas de suministro de productores vulnerables de los países menos desarrollados?”. Para responder a la pregunta anterior, la autora ha aplicado una metodología de casos de estudio. Esta metodología se considera apropiada porque la investigación sobre cadenas de suministro inclusivas es todavía escasa y porque es necesario entender en profundidad un fenómeno de la vida real, y para ello es fundamental conocer su contexto. En primer lugar, se realiza una revisión de literatura para identificar las proposiciones y los constructos teóricos que guiarán la posterior recogida de datos. La revisión de literatura se divide en dos partes: una más general que explora la dimensión social de la sostenibilidad en cadenas de suministro, y una más específica que se centra en la incorporación de los pobres como proveedores en cadenas de suministro. A lo largo de la última década, ha habido un crecimiento exponencial de los estudios académicos sobre la sostenibilidad de las cadenas de suministro, pero la mayoría de los esfuerzos se han dirigido hacia la dimensión medioambiental de la sostenibilidad. Por lo tanto la revisión de literatura, que se presenta en la Sección 3.1 (página 35) y que profundiza en la sostenibilidad social de las cadenas de suministro, puede considerarse una contribución en sí misma. Esta revisión de literatura revela que la investigación sobre aspectos sociales en cadenas de suministro está cobrando impulso en distintas áreas de conocimiento, principalmente en los ámbitos de investigación sobre “gestión de cadenas de suministro”, “responsabilidad social corporativa” y “estudios del desarrollo”. La investigación existente sobre sostenibilidad social de cadenas de suministro se centra en tres temas: aclarar la definición de sostenibilidad social; analizar la implementación de estrategias de sostenibilidad social en cadenas de suministro; y estudiar el apoyo de las em presas líderes a proveedores vulnerables para facilitar su transición hacia la sostenibilidad. Un marco conceptual que resume los principales hallazgos de esta primera parte de la revisión de literatura es planteado en la Figura 7 (página 48). No obstante, en el área de investigación que está emergiendo en torno a la sostenibilidad social de las cadenas de suministro, los estudios relacionados con la reducción de la pobreza son aún escasos. Además se aprecia una falta de contribuciones desde y sobre los países menos desarrollados, así como una clara tendencia a reflejar la visión de las empresas líderes de las cadenas de suministro, olvidando la perspectiva de los proveedores. La segunda parte de la revisión de literatura presentada en la Sección 3.2 (página 51) profundiza en tres líneas de investigación que exploran, desde distintas perspectivas, la inclusión de los pobres en cadenas de suministro. Estas líneas son “Global Value Chains” (GVC), “Base of the Pyramid” (BoP) y “Sustainable Supply Chain Management” (SSCM). La investigación en GVC analiza las cadenas de suministro desde la perspectiva de la globalización económica y el comercio internacional, poniendo especial énfasis en las implicaciones para los países en desarrollo y las comunidades vulnerables. GVC caracteriza las cadenas de suministro según la forma en la que son gobernadas, las oportunidades de mejora que existen para los productores que forman parte de la cadena y el grado de inclusión o exclusión de las comunidades más pobres y vulnerables. La investigación en BoP explora las relaciones comerciales entre empresas y comunidades pobres. La premisa fundamental del concepto BoP es la posibilidad de combinar la generación de beneficios con la reducción de la pobreza. La propuesta original es que mediante la venta de productos y servicios a las comunidades pobres de países en desarrollo, la pobreza puede ser reducida al tiempo que las empresas incrementan sus beneficios, especialmente las grandes empresas multinacionales. Esta idea ha ido evolucionando y, a día de hoy, los investigadores BoP consideran la incorporación de los pobres no sólo como consumidores sino también como empleados, proveedores y co-creadores. La investigación en SSCM ha estado fundamentalmente orientada al estudio de la dimensión medioambiental de la sostenibilidad de cadenas de suministro. Sin embargo, la creciente externalización de la producción a países en desarrollo y las demandas de los grupos de interés para que las empresas aborden todos los aspectos de la sostenibilidad han llevado a los académicos de SSCM a reconocer la importancia de integrar asuntos relacionados con la reducción de la pobreza en sus investigaciones. Algunos estudios comienzan a apuntar los principales retos a los que se enfrentan las empresas para colaborar con productores vulnerables en sus cadenas de suministro. Estos retos son: falta de comunicación, altos costes de transacción y el incremento de la complejidad de las operaciones. Las contribuciones de estas tres líneas de investigación son complementarias para el estudio de las cadenas de suministro inclusivas. Sin embargo, raramente han sido consideradas conjuntamente, ya que pertenecen a ámbitos de conocimiento distintos. Esta tesis integra las aportaciones de GVC, BoP y SSCM en un marco conceptual para la creación y gestión de cadenas de suministro inclusivas. Este marco conceptual para cadenas de suministro inclusivas queda representado en la Figura 9 (página 68). El marco conceptual refleja las motivaciones que llevan a las empresas a colaborar con productores vulnerables, los retos a los que se enfrentan al hacerlo, y los caminos o estrategias que están siguiendo para construir y operar cadenas de suministro inclusivas de manera que sean beneficiosas tanto para la empresa como para los productores vulnerables. A fin de validar y refinar el marco conceptual propuesto, tres casos de estudio se llevan a cabo. Las cadenas de suministro analizadas por los casos de estudio pertenecen al sector agrícola y sus principales proveedores se encuentran en países de África subsahariana. Múltiples métodos de recolección de datos y triangulación son utilizados para mejorar la fiabilidad de los datos. La autora desarrolló trabajos de campo en Senegal, Etiopía y Tanzania. Estos viajes permitieron enriquecer el proceso de recogida de información mediante entrevistas semiestructuradas y conversaciones informales con los principales actores de la cadena de suministro y mediante la observación directa de los procesos y las interacciones entre productores vulnerables y empresas. El Caso de estudio A (Sección 5.1 en página 96) es un caso de estudio único. Analiza la cadena de suministro local de verduras en Senegal. La organización focal es Manobi, una empresa senegalesa que provee servicios de bajo coste a emprendedores locales del sector agrícola. El Caso de estudio A proporciona un interesante análisis del funcionamiento de una cadena de suministro local en un país en desarrollo y muestra como la provisión de servicios profesionales puede mejorar el desempeño de productores vulnerables. El Caso de estudio B (Sección 5.2 en página 122) es un caso de estudio único. Analiza la cadena de suministro global de flor cortada con origen en Etiopía. La organización focal es EHPEA, la Asociación Etíope de Productores y Exportadores Hortícolas, cuya misión es promover y salvaguardar la posición competitiva del sector agrícola etíope en el mercado global. El Caso de estudio B ayuda a comprender mejor la perspectiva de los proveedores respecto a los requerimiento de sostenibilidad del mercado global. También muestra cómo la inclusión de los productores en el proceso de desarrollo de un estándar privado facilita su implementación posterior. El Caso de estudio C (Sección 5.3 en página 143) es un caso de estudio múltiple. Analiza la cadena de suministro global de café especial con origen en Tanzania. Las organizaciones focales son comerciantes que conectan de manera directa a pequeños agricultores de café en países en desarrollo con empresas tostadoras de café en países desarrollados. El Caso de estudio C muestra cómo un pequeño agricultor puede proveer un producto “premium” al mercado global, y participar en un segmento diferenciado del mercado a través de una cadena de suministro transparente y eficiente. Las aportaciones empíricas de los casos de estudio ayudan a validar y mejorar el marco conceptual sobre cadenas de suministro inclusivas (ver discusión en el Capítulo 6 en página 170). El resultado es la propuesta de una nueva versión del marco conceptual representado en la Figura 40 (página 195). Los casos de estudio también proporcionan interesantes aportaciones en relación a la gestión de cadenas de suministro inclusivas y muestran las perspectivas de distintos actores implicados. Esta tesis arroja luz sobre el papel de las empresas en la creación y la gestión de cadenas de suministro inclusivas llevando a cabo una revisión de literatura multidisciplinar y analizando tres casos de estudio en países africanos. Como resultado, esta tesis presenta una serie de contribuciones empíricas y teóricas al ámbito de investigación emergente en torno a las cadenas de suministro inclusivas (Capítulo 7). Esta tesis también pretende ser útil a profesionales que deseen facilitar la incorporación de los pobres como proveedores en condiciones justas y beneficiosas. ABSTRACT The global outlook is changing, and this is influencing the way we understand and try to achieve sustainable human development. Population growth entails increasing pressure over resources, but it also provides greater workforce and talent; concentration in urban areas is changing social dynamics and challenging traditional marketing channels, but also creating news markets and driving innovation; the global economy shift is rebalancing the traditional power imbalance between Western countries and the rest of the world, making new opportunities to arise; and interconnections and global interdependence create new risks but also opportunities for launching initiatives with a global reach. All these trends are impelling us to rethink what development is and in which way poverty alleviation should be approached. It is generally agreed that globalization implies interdependence and, in order to achieve sustainable human development, collaboration of all actors is needed. A convergence of issues, interests and solutions related to sustainable development is being observed across countries and sectors, encouraging strategic collaboration among companies, governments and civil society. There is little doubt nowadays about the crucial role of the private sector in the world’s path towards environmental sustainability and poverty alleviation. Businesses are evolving from a “business as usual” stance to a more sustainable and responsible approach. In the environmental arena, many companies have already “walk the talk”, implementing environmental management systems and trying to reduce emissions and energy consumption. However, regarding poverty alleviation, their contribution is less clear. There are around 1.2 billion people living in extreme poverty. Most of this people still live in rural areas where the agricultural sector employs a big part of the active population. Therefore, improving opportunities and reducing risks for vulnerable producers in the agri-food sector can be a primary engine of rural development and poverty alleviation, particularly in the poor, agriculture-based economies of least developed countries. Some companies are beginning to include the poor into their operations as consumers, suppliers and entrepreneurs. This thesis focuses specifically on the potential opportunities related to the sustainable incorporation of the poor as suppliers of products and/or labor. Business collaboration with vulnerable producers in developing countries is a relatively new trend and it is still understudied. The overall question guiding this thesis is: “How can businesses facilitate the sustainable inclusion of vulnerable producers from least developed countries into supply chains?”. In order to answer the research question, the author has applied a case study research strategy. This methodology is considered appropriate because research about inclusive supply chains is still at an early stage, and because there is a need to understand a real-life phenomenon in depth, but such understanding encompasses important contextual conditions. First, a literature review is conducted, in order to identify the research propositions and theoretical constructs that will guide the data collection. The literature review is divided in two parts: a more general one that explores the social dimension of sustainability of supply chains, and a more specific one that focuses on the incorporation of the poor as suppliers in supply chains. During the last decade, there has been an exponential growth of studies in the field of supply chain sustainability, but research efforts have traditionally been directed towards the analysis of the environmental dimension. Therefore, the literature review presented in Section 3.1 (page 35) that delves into social sustainability of supply chains can be considered a contribution in itself. This literature review reveals that the investigation of social issues in supply chains is gaining momentum and comes from different academic disciplines, namely Supply Chain Management, Corporate Social Responsibility and Development Studies. Existing research about social sustainability of supply chains focuses on three issues: clarify the definition of social sustainability; analyze the implementation of social sustainability strategies in supply chains; and study lead companies’ support to vulnerable suppliers in their transition towards sustainability. A conceptual framework that outlines the main findings that emerge from this first part of literature review is proposed in Figure 7 (page 48). Nevertheless, in this nascent field of social sustainability of supply chains, studies related to poverty alleviation are still scarce. Moreover, a lack of contributions from and about least developed countries has been observed, as well as a tendency to reflect on the lead firms’ standpoint, neglecting the suppliers’ perspective. The second part of the literature review (Section 3.2 in page 51) delves into three research streams that are exploring the inclusion of the poor into supply chains from different viewpoints. These research streams are Global Value Chains (GVC), Base of the Pyramid (BoP) and Sustainable Supply Chain Management (SSCM). GVC research discusses the dynamics of economic globalization and international trade, putting special emphasis in the implications for developing countries and vulnerable communities. GVC characterizes supply chains by the way they are governed, the upgrading opportunities that exist for producers in the chain and the degree of inclusion or exclusion of impoverished communities. BoP research explores trading relationships between businesses and impoverished communities. The core premise of the BoP concept is the possibility to combine profits with poverty alleviation. The original BoP proposition is that by marketing innovative products and services to poor communities in developing countries, poverty would be reduced and companies would increase their benefits, especially multinational companies. This idea has evolved to consider the incorporation of the poor to business activities not only as consumers, but also as employees, entrepreneurs and co-creators. The SSCM school of thought has mainly focused on studying the environmental dimension of supply chain sustainability, neglecting the consideration of the social perspective. However, in recent years, increasing outsourcing of production to developing countries and stakeholders’ demands for a more holistic approach to business sustainability have led SSCM scholars to acknowledge the importance of integrating poverty concerns in this field’s research agenda. Some SSCM studies identify the main operational challenges for companies which engage with vulnerable suppliers in their supply chains: missing communication, higher transactional and operational costs and increased complexity. Contributions from these three research streams are complementary for the study of inclusive supply chains. However, they have been rarely considered together, since they belong to different research areas. This thesis seeks to play a dovetailing role in this scenario by proposing a conceptual framework for creating and operating inclusive supply chains that builds on contributions from GVC, SSCM and BoP research. This framework for inclusive supply chains is depicted in Figure 9 (page 68), and explains the motivations that drive businesses to collaborate with vulnerable suppliers, the chal lenges they face in doing so, and the pathways they are following in order to build and operate inclusive supply chains profitably for both buying companies and vulnerable suppliers. In order to validate and refine the proposed framework, three case studies are carried out. The supply chains analyzed by the case studies belong to the agri-food sector and source from Sub-Saharan African countries. Multiple data collection methods and triangulation are used in order to improve reliability of findings. The author carried out field work in Senegal, Ethiopia and Tanzania. These travels enriched the data collection process, providing semi-structured interviews and informal conversations with the main actors in the supply chains, as well as direct observation of processes and interactions among companies and vulnerable suppliers. Case study A (Section 5.1 in page 96) is a single case study. It analyzes a local supply chain in Senegal providing vegetables to the local market. The focal organization is Manobi, a Senegalese inclusive business which provides affordable ICT services to local entrepreneurs in the agri-food sector. Case study A provides interesting insights into the dynamics of local supply chains and how professional services can help to improve their performance. Case study B (Section 5.2 in page 122) is a single case study. It analyzes a global supply chain with origin in Ethiopia providing cut flowers to the global commodity market. The focal organization is EHPEA, Ethiopian Horticulture Producers and Exporters Association, whose mission is to promote and safeguard the competitive position of the Ethiopian horticulture sector within the global market. Case study B helps to better understand the suppliers’ perspective regarding global market sustainability requirements and shows how the inclusion of suppliers in the process of development of a private standard has a positive impact in its implementation. Case study C (Section 5.3 in page 143) is a multiple case study. It analyzes a global supply chain with origin in Tanzania providing coffee to the global niche market of specialty coffee. The focal organizations are traders who are directly connecting smallholder coffee farmers in developing countries to coffee roasters in developed countries. Case study C shows how smallholder farmers can supply a premium product and be incorporated in a differentiated market segment through a transparent and efficient supply chain. The empirical findings from the case studies help to validate and refine the conceptual framework (see discussion in Chapter 6). The proposal of a new version of the conceptual framework is depicted in Figure 40 (page 195). The case studies also provide interesting insights related to the management of inclusive supply chains and show the perspectives of the different actors involved. This thesis sheds some light on the role of businesses in the creation and operation of inclusive supply chains by carrying out a cross-disciplinary literature review and analyzing three case studies in African countries. In doing so, this thesis presents a series of theoretical and empirical contributions to the emerging academic field of inclusive supply chains (Chapter 7). This thesis also intends to be useful to practitioners willing to improve the incorporation of the poor as suppliers in fair and profitable conditions.

La opción radical : viaje a través de Superstudio

Entre 1966 y 1967 un pequeño grupo de jóvenes arquitectos recién titulados en la Facultad de Arquitectura de Florencia escenifican en dos actos programados en las ciudades de Pistoia y Módenala exposición Superarchitettura, con la que sin saberlo inauguran un corto pero intenso periodo de experimentación arquitectónica que convulsionaría Italia durante los 10 años posteriores, dinamitados por multitud de propuestas que darán lugar a la última arquitectura con aspiraciones socio-políticas responsable de un vibrante legado teórico que proclamaba la vuelta a las raíces olvidadas de la profesión y que se mostraba más preocupada por reflexionar sobre sus fundamentos que por perpetuar la práctica de un oficio ahora puesto en crisis. Ambos eventos suponen también el nacimiento simultáneo de Superstudio y Archizoom, dos de los colectivos más influyentes de la arquitectura experimental italiana de estos años, convertidos en protagonistas de un agitado periodo de transición en el que una generación estaba dando paso a la siguiente a través de la sustitución de los principios doctrinarios recibidos de la modernidad por una jugosa incertidumbre desmitificadora ligada a una nueva realidad económica, política y social que marcaría los inicios de la posmodernidad. La experiencia italiana surge aprovechando la efervescencia de un fenómeno que posteriormente algunos críticos etiquetaron como Arquitectura Radical con la intención de unificar el trabajo de un heterogéneo y atomizado grupo de arquitectos fundamentalmente europeos – individualmente comprometidos con el replanteamiento total de la definición y objetivos de la disciplina, al tiempo que participaban en una particular cruzada existencial mediante la que pretendían, si no cambiar el mundo, al menos romper la dinámica estéril de la arquitectura profesional y tecnológica heredada. La presente tesis fomenta la recuperación interesada de este breve momento radical como un ambicioso proyecto de modernización inacabado, pero no solo para analizar las causas de su precipitado final, sino sobre todo para mostrar las razones de su gran éxito internacional, convirtiendo para ello el trabajo de Superstudio, ejemplo paradigmático de la actitud crítica compartida por el resto de operadores contemporáneos, en el catalizador adecuado a partir del cual interpretar y extrapolar su legado con el fin de narrar el cambio trascendental que este episodio supuso para la práctica arquitectónica, alejándola del diseño de edificios y centrándola en la adopción y aplicación de multitud de actividades no tectónicas en un intento por separarse de lo que era percibido como una disciplina corrupta. A lo largo de su corta carrera en común, los seis miembros de Superstudio sustituyeron la construcción convencional por la explotación intensiva de medios alternativos desde el diseño de mobiliario e iluminación y algunos experimentos en torno a la “arquitectura eléctrica”, hasta la expansión mediática de su trabajo a través de revistas, películas, exposiciones y conferencias contribuyendo así a una provocativa destrucción y posterior expansión de los límites dentro de los que hasta ese momento se había mantenido cómodamente instalada la arquitectura. Esta investigación descubre la trascendencia de considerar aquello que ocupó gran parte de la actividad de Superstudio y de sus colegas radicales (muebles, revistas, instalaciones, películas, labor teórica y docente, etc.) como nuevas formas de arquitectura con las que construir un nuevo lenguaje crítico, en un intento por contribuir a renovar y reforzar la relevancia y responsabilidad social de una profesión llamada a expandirse más allá de lo construido para nutrirse e interactuar con todos los ámbitos de nuestro entorno diario. ABSTRACT Between 1966 and 1967 a small group of newly qualified young architects from the Faculty of Architecture of Florence staged in two events planned in the cities of Pistoia and Modena the Superarchitettura exhibition, with which unwittingly inaugurated a short but intense period of architectural experimentation that convulse Italy during the following 10 years, blown up by a multitude of proposals that will result in the latest architecture with socio political aspirations responsible for a vibrant theoretical legacy proclaiming a return to forgotten roots of the profession and that was more concerned with reflect on its fundamentals than perpetuate the practice of a profession now put into crisis. Both events also involve the simultaneous birth of Superstudio and Archizoom, two of the most influential groups of Italian experimental architecture of these years, turned into protagonists of an hectic period of transition in which a generation was giving way to the next through replacing the received doctrinal principles of modernity by a juicy demystifying uncertainty linked to a new reality economic, political and social that would mark the beginning of postmodernism. The Italian experience arises taking advantage of the commotion of a phenomenon that later some critics labeled as Radical Architecture with the intention of unifying the work of a diverse and fragmented group of architects mainly European individually committed to the total rethinking of the definition and objectives of the discipline, while participating in a particular existential crusade with which they sought to, if not change the world, at least break out of the sterile dynamic of professional and technological architecture inherited. This doctoral thesis promotes an interested recovery of in this short radical time as an ambitious modernization project unfinished, but not only to analyze the causes of its precipitous end, but above all to show the reasons for it’s international success, turning the work of Superstudio, a paradigmatic example of the critical attitude shared by the rest of contemporary operators, into the suitable catalyst from which to interpret and extrapolate it’s legacy in order to recount the significant change that this episode marked for architectural practice, moving it away from building and focusing it on the adoption and implementation of many nonLtectonic activities in an attempt to separate from what was perceived as a corrupt discipline. Throughout their short career in common, the six members of Superstudio replaced conventional construction by intensive exploitation of alternative means L from furniture and lighting design and some experiments around the "electric architecture", to the media expansion of their work through magazines, films, exhibitions and lectures thus contributing to a provocative destruction and subsequent expansion of the limits within which architecture had remained ensconced until then. This dissertation finds out the importance of considering what occupied much of the activity of Superstudio and their radical colleagues (furniture, magazines, installations, films, theoretical and educational work, etc.) as new forms of architecture that build a new critical language, in an attempt to help renew and reinforce the relevance and social responsibility of a profession call to expand beyond the built to nourish and interact with all areas of our everyday environment.

Labor risk prevention culture encouragement among students from building degree in the Technical University of Madrid

The influence of training in labor risk prevention and the development of the resulting pre-emptive culture are analyzed within this paper. In order to achieve this, a quantitative analysis of the students of Building Degree in the Technic University of Madrid has been developed. This study has been made in all grades, valuating the previous knowledge acquired during compulsory education. It must be kept in mind that the students in 3rd and 4th grade have received general and specific compulsory training in prevention and safety in the building sector.

Choques de oferta e política monetária na economia brasileira: Uma análise do impacto dos preços das commodities na inflação entre 2002 e 2014

Há mais de uma década o controle dos níveis de preço na economia brasileira é realizado dentro do escopo do Regime de Metas de Inflação, que utiliza modelos macroeconômicos como instrumentos para guiar as tomadas de decisões sobre política monetária. Após um período de relativo êxito (2006 - 2009), nos últimos anos apesar dos esforços das autoridades monetárias na aplicação das políticas de contenção da inflação, seguindo os mandamentos do regime de metas, esta tem se mostrado resistente, provocando um debate em torno de fatores que podem estar ocasionando tal comportamento. Na literatura internacional, alguns trabalhos têm creditado aos choques de oferta, especialmente aos desencadeados pela variação dos preços das commodities, uma participação significativa na inflação, principalmente em economias onde os produtos primários figuram como maioria na pauta exportadora. Na literatura nacional, já existem alguns trabalhos que apontam nesta mesma direção. Sendo assim, buscou-se, como objetivo principal para o presente estudo, avaliar como os choques de oferta, mais especificamente os choques originados pelos preços das commodities, têm impactado na inflação brasileira e como e com que eficiência a política monetária do país tem reagido. Para tanto, foi estimado um modelo semiestrutural contendo uma curva de Phillips, uma curva IS e duas versões da Função de Reação do Banco Central, de modo a verificar como as decisões de política monetária são tomadas. O método de estimação empregado foi o de Autorregressão Vetorial com Correção de Erro (VEC) na sua versão estrutural, que permite uma avaliação dinâmica das relações de interdependência entre as variáveis do modelo proposto. Por meio da estimação da curva de Phillips foi possível observar que os choques de oferta, tanto das commodities como da produtividade do trabalho e do câmbio, não impactam a inflação imediatamente, porém sua relevância é crescente ao longo do tempo chegando a prevalecer sobre o efeito autorregressivo (indexação) verificado. Estes choques também se apresentaram importantes para o comportamento da expectativa de inflação, produzindo assim, uma indicação de que seus impactos tendem a se espalhar pelos demais setores da economia. Através dos resultados da curva IS constatou-se a forte inter-relação entre o hiato do produto e a taxa de juros, o que indica que a política monetária, por meio da fixação de tal taxa, influencia fortemente a demanda agregada. Já por meio da estimação da primeira função de reação, foi possível perceber que há uma relação contemporânea relevante entre o desvio da expectativa de inflação em relação à meta e a taxa Selic, ao passo que a relação contemporânea do hiato do produto sobre a taxa Selic se mostrou pequena. Por fim, os resultados obtidos com a segunda função de reação, confirmaram que as autoridades monetárias reagem mais fortemente aos sinais inflacionários da economia do que às movimentações que acontecem na atividade econômica e mostraram que uma elevação nos preços das commodities, em si, não provoca diretamente um aumento na taxa básica de juros da economia.

Analyzing the commercial activities of a street network by ranking their nodes: a case study in Murcia, Spain

Urban researchers and planners are often interested in understanding how economic activities are distributed in urban regions, what forces influence their special pattern and how urban structure and functions are mutually dependent. In this paper, we want to show how an algorithm for ranking the nodes in a network can be used to understand and visualize certain commercial activities of a city. The first part of the method consists of collecting real information about different types of commercial activities at each location in the urban network of the city of Murcia, Spain. Four clearly differentiated commercial activities are studied, such as restaurants and bars, shops, banks and supermarkets or department stores, but obviously we can study other. The information collected is then quantified by means of a data matrix, which is used as the basis for the implementation of a PageRank algorithm which produces a ranking of all the nodes in the network, according to their significance within it. Finally, we visualize the resulting classification using a colour scale that helps us to represent the business network.

Developmental Paths and Activities of Successful Sport Coaches

The purpose of this research report is to present an overview of an ongoing, international project designed to chart the developmental paths and activities of sport coaches. This brief report includes three sections: (a) conceptual framework used to guide the project, (b) project design and methodology, and (c) results from pilot studies with a sample of 15 successful coaches working in different sport contexts in the United States Unlike the findings for athletic profiles, where several trends across coaching contexts were evident, only one trend was found in how these diverse groups of coaches invested their time in coach developmental activities. In relation to other coaching activities very little time was devoted to formal coach education on an annual basis. The results reinforce the need to consider the coaching context when examining coach development and when designing coach development initiatives.

Record of undergraduates’ activities in virtual learning environments

Virtual learning environments (VLEs) have witnessed a high evolution, namely regarding their potentialities, the tools and the activities they provide. VLEs enable us to access large quantities of data resulting from both students and teachers’ activities developed in those environments. Monitoring undergraduates’ activities in VLEs is important as it allows us to showcase, in a structured way, a number of indicators which may be taken into account to understand the learning process more deeply and to propose improvements in the teaching and learning strategies as well as in the institution’s virtual environment. Although VLEs provide several data sectorial statistics, they do not provide knowledge regarding the institution’s evolution. Therefore, we consider the analysis of the activity logs in VLEs over a period of five years to be paramount. This paper focuses on the analysis of the activities developed by students in a virtual learning environment, from a sample of undergraduate students, approximately 7000 per year, over a period of five academic years, namely from 2009/2010 to 2013/2014. The main aims of this research work are to assess the evolution of activity logs in the virtual learning environment of a Portuguese public higher education institution, in order to fill possible gaps and to hold out the prospect of new forms of use of the environment. The results obtained from the data analysis show that overall, the number of accesses to the virtual learning environment increased over the five years under study. The most used tools were Resources, Messages and Assignments. The most frequent activities developed with these tools were respectively consulting information, sending messages and submitting assignments. The frequency of accesses to the virtual learning environment was characterized according to the number of accesses in the activity log. The data distribution was divided into five frequency categories named very low, low, moderate, high and very high, determined by the percentiles 20, 40, 60, 80 and 100, respectively. The study of activity logs of virtual learning environments is important not only because they provide real knowledge of the use that undergraduates make of these environments, but also because of the possibilities they create regarding the identification of a need for new pedagogical approaches or a reinforcement of previously consolidated approaches.

EU Law, International Law and Economic Sanctions against Terrorism: The Judiciary in Distress? Research Papers in Law, 3/2008

From the Introduction. This article seeks to examine the relationship between European Union law, international law, and the protection of fundamental rights in the light of recent case law of the European Court of Justice (ECJ) and the Court of First Instance (CFI) relating to economic sanctions against individuals. On 3 September 2008, the ECJ delivered its long-awaited judgment in Kadi and Al Barakaat on appeal from the CFI.3 In its judgment under appeal,4 the CFI had held that the European Community (EC) is competent to adopt regulations imposing economic sanctions against private organisations in pursuance of UN Security Council (UNSC) Resolutions seeking to combat terrorism; that although the EC is not bound directly by the UN Charter, it is bound pursuant to the EC Treaty to respect international law and give effect to UNSC; and that the CFI has jurisdiction to examine the compatibility of EC regulations implementing UNSC resolutions with fundamental rights not as protected by the EC but as protected by jus cogens. On appeal, following the Opinion of Maduro AG, the ECJ rejected the CFI’s approach. It held that UNSC resolutions are binding only in international law. It subjected the contested regulations to full review under EC human rights standards and found them in breach of the right to a hearing, the right to judicial protection and the right to property. Kadi and Al Barakaat is the most important judgment ever delivered by the ECJ on the relationship between EC and international law and one of its most important judgments on fundamental rights. It is imbued by constitutional confidence, commitment to the rule of law but also some scepticism towards international law. In the meantime, the CFI has delivered a number of other judgments on anti-terrorist sanctions assessing the limits of the “emergency constitution” at European level. The purpose of this paper is to examine the above case law and explore the dilemmas and tensions facing the EU judiciary in seeking to define and protect the EU’s distinct constitutional space. It is divided as follows. It first looks at the judgment in Kadi. After a short presentation of the factual and legal background, it explores the question whether the EU has competence to adopt smart sanctions. It then examines whether the EU is bound by resolutions of the Security Council, whether the ECJ has jurisdiction to review Community measures implementing such resolutions and the applicable standard of judicial scrutiny. It analyses the contrasting views of the CFI, the Advocate General, and the ECJ taking account also of the case law of the European Court of Human Rights (ECtHR). Further, it explores the consequences of annulling the contested regulation. It then turns to discussing CFI case law in relation to sanctions lists drawn up not by the UN Security Council but by the EC. The paper concludes by welcoming the judgment of the ECJ. Whilst its reasoning on the issue of Community competence is questionable, once such competence is established, it is difficult to support the abrogation of Community standards for the protection of fundamental rights. Such standards should ensure procedural due process whilst recognising the importance of public security.

The importance of International Developments in the case-law of the European Court of Justice: Kadi and the autonomy of the EC legal order. Research Papers in Law, 1/2009

From the Introduction. In the USA, the debate is still ongoing as to whether and to what extent the Supreme Court could or should refer to foreign precedent, in particular in relation to constitutional matters such as the death penalty.1 In the EU, in particular the recent Kadi case of 20082 has triggered much controversy,3 thereby highlighting the opposite angle to a similar discussion. The focus of attention in Europe is namely to what extent the European Court of Justice (hereafter “ECJ”) could lawfully and rightfully refuse to plainly ‘surrender’ or to subordinate the EC legal system to UN law and obligations when dealing with human rights issues. This question becomes all the more pertinent in view of the fact that in the past the ECJ has been rather receptive and constructive in forging interconnectivity between the EC legal order and international law developments. A bench mark in that respect was undoubtedly the Racke case of 1998,4 where the ECJ spelled out the necessity for the EC to respect international law with direct reference to a ruling of the International Court of Justice. This judgment which was rendered 10 years earlier than Kadi equally concerned EC/EU economic sanctions taken in implementation of UN Security Council Resolutions. A major question is therefore whether it is at all possible, and if so to determine how, to reconcile those apparently conflicting judgments.

Flexicurity e valorizzazione delle capability: l'impulso alla ri-regolamentazione del lavoro a termine = Flexicurity and enhancement of work capability: the impulse to re-regulation of labor. WP C.S.D.L.E. “Massimo D’Antona”.INT – 97/2012

The paper analyzes the evolution of the concept of flexicurity in the european context. In this perspective, flexicurity is expressed through the language of the policies, showing an inherent weakness in influencing national reform processes. The essay compare also with the possibility of a re-reading of flexicurity policies, in the light of the theory of capabilities developed by Amartya Sen.

La réforme Dodd-Frank des produits dérivés de gré à gré : vers un modèle mondial?

Suite à la crise financière de 2008 les pays du G20 se sont interrogés sur la transparence des marchés, la stabilité du système et une façon de réguler les risques posés par le nouvel environnement économique. Les produits dérivés de gré à gré ont été identifiés et des engagements ont été pris en faveur de nouvelles régulations des dérivés de gré à gré et la gestion des risques sous-jacents. Les régulateurs ont donc adopté chacun à leur tour un cadre législatif régulant les dérivés de gré à gré tout en déployant un effort international d'harmonisation et de reconnaissance des contreparties assujetties à des régimes équivalents. Les autorités canadiennes en valeurs mobilières ont publié des projets de règlements. Nous nous interrogerons sur ce nouveau cadre réglementaire des dérivés de gré à gré élaboré par les autorités canadiennes en valeurs mobilières, prenant en considération les spécificités canadiennes et les acteurs actifs sur leur territoire. Notre étude traite de ces projets de règlements et de la difficulté d'encadrer les marchés des dérivés de gré à gré qui par définition ne comportent pas de plateformes de négociation ou de lieu géographique et de frontières mais se caractérisent surtout par le lien contractuel entre les parties et l'identification de ces parties. L'élaboration d'un nouveau cadre pour les dérivés de gré à gré qui régule les transactions transfrontières semble très délicat à traiter et les possibles conflits et chevauchements de lois seront inévitables. Confrontés à des définitions divergentes de contreparties locales, les parties à une opération seront condamnées à un risque de qualification en vertu des règlements nationaux sur les dérivés de gré à gré. Une concertation pourrait être renforcée et la détermination de l'autorité compétente ainsi que les concepts de contreparties locales, succursales ou filiales pourraient être harmonisés.

The WTO and Female Labor Rights in Developing Countries. IES WORKING PAPER 3/2008

The impacts of WTO on women’s labour rights in the developing countries have been raised to the international agenda by various nongovernmental organizations. On the one hand it is assumed that international trade policies are gender neutral. On the other hand a number of authors hold the view that the negative impacts of WTO policies are more pronounced on female than male workers. This paper takes a critical look at these claims. It argues that the impact of the WTO system, the driving force of trade liberalization, on women’s labour rights in the developing countries is a complicated issue, because the effects have been both negative and positive. In support of this claim, this paper first briefly reviews the international framework for the protection of women’s labour rights. Next, the WTO agreements and policies are analysed insofar as they are relevant for the protection of women’s labour rights. The analysis covers, for example, the use of the trade policy review mechanism and restrictions of trade on grounds of violation of public morals.. Finally, a case study is conducted on the situation of female workers in Bangladesh and Pakistan, countries that have recently undergone a liberalization of trade in the textiles and clothing sectors. It is concluded that the increase of international trade in the developing countries has created many work opportunities for women, helped them to become more independent and allowed them to participate in the society more actively. However, it is at the same time posited that in order to comply with its own objectives of raising standards of living and full employment, the WTO should engage itself in active policies to overcome the negative aspects of trade on female workers in the developing countries.