Molecular Interactions of Prodiginines with the BH3 Domain of Anti-Apoptotic Bcl-2 Family Members.

Prodigiosin and obatoclax, members of the prodiginines family, are small molecules with anti-cancer properties that are currently under preclinical and clinical trials. The molecular target(s) of these agents, however, is an open question. Combining experimental and computational techniques we find that prodigiosin binds to the BH3 domain in some BCL-2 protein families, which play an important role in the apoptotic programmed cell death. In particular, our results indicate a large affinity of prodigiosin for MCL-1, an anti-apoptotic member of the BCL-2 family. In melanoma cells, we demonstrate that prodigiosin activates the mitochondrial apoptotic pathway by disrupting MCL-1/BAK complexes. Computer simulations with the PELE software allow the description of the induced fit process, obtaining a detailed atomic view of the molecular interactions. These results provide new data to understand the mechanism of action of these molecules, and assist in the development of more specific inhibitors of anti-apoptotic BCL-2 proteins.

Photomultiplier nonlinear response in time-domain laser-induced luminescence spectroscopy

A new procedure to find the limiting range of the photomultiplier linear response of a low-cost, digital oscilloscope-based time-resolved laser-induced luminescence spectrometer (TRLS), is presented. A systematic investigation on the instrument response function with different signal input terminations, and the relationship between the luminescence intensity reaching the photomultiplier and the measured decay time are described. These investigations establish that setting the maximum intensity of the luminescence signal below 0.3V guarantees, for signal input terminations equal or higher than 99.7 ohm, a linear photomultiplier response.

Effects of institutional environment and technology development on payment choice

The purpose of this paper is to analyze the combination of institutional factors and technology advances as determinants of payment systems choice. The theoretical set up suggests that countries entering into a new institutional environment approach accepting group attitudes towards payment choices as a consequence of institutional pressure and technology development. We apply the results of the model to 2004 European Union enlargement process. Results confirm the relevance of both institutional environment and technology development in retail payment system decisions of newly acceded countries.

Influence of Institutional Environment on Companies’ Innovation Activity

At the time of moving towards knowledge-based economy, countries pay much attention to innovations by making them a central issue in countries’ innovation policy development. Innovations are influenced much by the institutional environment, in which they are created. That is why exploration of National Innovation Systems, as an important part of such an environment, became central in works of different researchers all over the world.

Utilization of a Time Domain Simulator in the Technical and Economic Analysis of a Wind Turbine Electric Drive Train

The amount of installed wind power has been growing exponentially during the past ten years. As wind turbines have become a significant source of electrical energy, the interactions between the turbines and the electric power network need to be studied more thoroughly than before. Especially, the behavior of the turbines in fault situations is of prime importance; simply disconnecting all wind turbines from the network during a voltage drop is no longer acceptable, since this would contribute to a total network collapse. These requirements have been a contributor to the increased role of simulations in the study and design of the electric drive train of a wind turbine. When planning a wind power investment, the selection of the site and the turbine are crucial for the economic feasibility of the installation. Economic feasibility, on the other hand, is the factor that determines whether or not investment in wind power will continue, contributing to green electricity production and reduction of emissions. In the selection of the installation site and the turbine (siting and site matching), the properties of the electric drive train of the planned turbine have so far been generally not been taken into account. Additionally, although the loss minimization of some of the individual components of the drive train has been studied, the drive train as a whole has received less attention. Furthermore, as a wind turbine will typically operate at a power level lower than the nominal most of the time, efficiency analysis in the nominal operating point is not sufficient. This doctoral dissertation attempts to combine the two aforementioned areas of interest by studying the applicability of time domain simulations in the analysis of the economicfeasibility of a wind turbine. The utilization of a general-purpose time domain simulator, otherwise applied to the study of network interactions and control systems, in the economic analysis of the wind energy conversion system is studied. The main benefits of the simulation-based method over traditional methods based on analytic calculation of losses include the ability to reuse and recombine existing models, the ability to analyze interactions between the components and subsystems in the electric drive train (something which is impossible when considering different subsystems as independent blocks, as is commonly done in theanalytical calculation of efficiencies), the ability to analyze in a rather straightforward manner the effect of selections other than physical components, for example control algorithms, and the ability to verify assumptions of the effects of a particular design change on the efficiency of the whole system. Based on the work, it can be concluded that differences between two configurations can be seen in the economic performance with only minor modifications to the simulation models used in the network interaction and control method study. This eliminates the need ofdeveloping analytic expressions for losses and enables the study of the system as a whole instead of modeling it as series connection of independent blocks with no lossinterdependencies. Three example cases (site matching, component selection, control principle selection) are provided to illustrate the usage of the approach and analyze its performance.

Genesis and Emplacement of Carbonatites and Lamprophyres in the Svecofennian Domain

A small carbonatite dyke swarm has been identified at Naantali, southwest Finland. Several swarms of shoshonitic lamprophyres are also known along the Archean-Proterozoic boundary in eastern Finland and northwest Russia. These intrusions, along with the carbonatite intrusion at Halpanen, eastern Finland, represent a stage of widespread low-volume mantle-sourced alkaline magmatism in the Svecofennian Domain. Using trace element and isotope geochemistry coupled with precise geochronology from these rocks, a model is presented for the Proterozoic metasomatic evolution of the Fennoscandian subcontinental lithospheric mantle. At ~2.2-2.06 Ga, increased biological production in shallow seas linked to continental rifting, resulted in increased burial rates of organic carbon. Subduction between ~1.93-1.88 Ga returned organic carbon-enriched sediments of mixed Archean and Proterozoic provenance to the mantle. Dehydration reactions supplied water to the mantle wedge, driving arc volcanism, while mica, amphibole and carbonate were brought deeper into the mantle with the subducting slab. The cold subducted slab was heated conductively from the surrounding warm mantle, while pressures continued to gradually increase as a result of crustal thickening. The sediments began to melt in a two stage process, first producing a hydrous alkaline silicate melt, which infiltrated the mantle wedge and crystallised as metasomatic veins. At higher temperatures, carbonatite melt was produced, which preferentially infiltrated the pre-existing metasomatic vein network. At the onset of post-collisional extension, deep fault structures formed, providing conduits for mantle melts to reach the upper crust. Low-volume partial melting of the enriched mantle at depths of at least 110 km led to the formation of first carbonatitic magma and subsequently lamprophyric magma. Carbonatite was emplaced in the upper crust at Naantali at 1795.7 ± 6.8 Ma; lamprophyres along the Archean-Proterozoic boundary were emplaced between 1790.1 ± 3.3 Ma and 1781 ± 20 Ma.

Boundary identification in the domain of a parabolic partial differential equation

Bakgrunden och inspirationen till föreliggande studie är tidigare forskning i tillämpningar på randidentifiering i metallindustrin. Effektiv randidentifiering möjliggör mindre säkerhetsmarginaler och längre serviceintervall för apparaturen i industriella högtemperaturprocesser, utan ökad risk för materielhaverier. I idealfallet vore en metod för randidentifiering baserad på uppföljning av någon indirekt variabel som kan mätas rutinmässigt eller till en ringa kostnad. En dylik variabel för smältugnar är temperaturen i olika positioner i väggen. Denna kan utnyttjas som insignal till en randidentifieringsmetod för att övervaka ugnens väggtjocklek. Vi ger en bakgrund och motivering till valet av den geometriskt endimensionella dynamiska modellen för randidentifiering, som diskuteras i arbetets senare del, framom en flerdimensionell geometrisk beskrivning. I de aktuella industriella tillämpningarna är dynamiken samt fördelarna med en enkel modellstruktur viktigare än exakt geometrisk beskrivning. Lösningsmetoder för den s.k. sidledes värmeledningsekvationen har många saker gemensamt med randidentifiering. Därför studerar vi egenskaper hos lösningarna till denna ekvation, inverkan av mätfel och något som brukar kallas förorening av mätbrus, regularisering och allmännare följder av icke-välställdheten hos sidledes värmeledningsekvationen. Vi studerar en uppsättning av tre olika metoder för randidentifiering, av vilka de två första är utvecklade från en strikt matematisk och den tredje från en mera tillämpad utgångspunkt. Metoderna har olika egenskaper med specifika fördelar och nackdelar. De rent matematiskt baserade metoderna karakteriseras av god noggrannhet och låg numerisk kostnad, dock till priset av låg flexibilitet i formuleringen av den modellbeskrivande partiella differentialekvationen. Den tredje, mera tillämpade, metoden kännetecknas av en sämre noggrannhet förorsakad av en högre grad av icke-välställdhet hos den mera flexibla modellen. För denna gjordes även en ansats till feluppskattning, som senare kunde observeras överensstämma med praktiska beräkningar med metoden. Studien kan anses vara en god startpunkt och matematisk bas för utveckling av industriella tillämpningar av randidentifiering, speciellt mot hantering av olinjära och diskontinuerliga materialegenskaper och plötsliga förändringar orsakade av “nedfallande” väggmaterial. Med de behandlade metoderna förefaller det möjligt att uppnå en robust, snabb och tillräckligt noggrann metod av begränsad komplexitet för randidentifiering.

Perspectives interculturelles et interlinguistiques sur le discours académique – Crosscultural and Crosslinguistic Perspectives on Academic Discourse. Volume 1

The Department of French Studies of the University of Turku (Finland) organized an International Bilingual Conference on Crosscultural and Crosslinguistic Perspectives on Academic Discourse from 2022 May 2005. The event hosted specialists on Academic Discourse from Belgium, Finland, France, Germany, Italy, Norway, Spain, and the USA. This book is the first volume in our series of publications on Academic Discourse (AD hereafter). The following pages are composed of selected papers from the conference and focus on different aspects and analytical frameworks of Academic Discourse. One of the motivations behind organizing the conference was to examine and expand research on AD in different languages. Another one was to question to what extent academic genres are culturebound and language specific or primarily field or domain specific. The research carried out on AD has been mainly concerned with the use of English in different academic settings for a long time now – mainly written contexts – and at the expense of other languages. Alternatively the academic genre conventions of English and English speaking world have served as a basis for comparison with other languages and cultures. We consider this first volume to be a strong contribution to the spreading out of researches based on other languages than English in AD, namely Finnish, French, Italian, Norwegian and Romanian in this book. All the following articles have a strong link with the French language: either French is constitutive of the AD corpora under examination or the article was written in French. The structure of the book suggests and provides evidence that the concept of AD is understood and tackled to varying degrees by different scholars. Our first volume opens up the discussion on what AD is and backs dissemination, overlapping and expansion of current research questions and methodologies. The book is divided into three parts and contains four articles in English and six articles in French. The papers in part one and part two cover what we call the prototypical genre of written AD, i.e. the research article. Part one follows up on issues linked to the 13 Research Article (RA hereafter). Kjersti Fløttum asks wether a typical RA exists and concentrates on authors’ voices in RA (self and other dimensions), whereas Didriksen and Gjesdal’s article focuses on individual variation of the author’s voice in RA. The last article in this section is by Nadine Rentel and deals with evaluation in the writing of RA. Part two concentrates on the teaching and learning of AD within foreign language learning, another more or less canonical genre of AD. Two aspects of writing are covered in the first two articles: foreign students’ representations on rhetorical traditions (Hidden) and a contrastive assessment of written exercices in French and Finnish in Higher Education (Suzanne). The last contribution in this section on AD moves away from traditional written forms and looks at how argumentation is constructed in students’ oral presentations (Dervin and Fauveau). The last part of the book continues the extension by featuring four articles written in French exploring institutional and scientific discourses. Institutional discourses under scrutiny include the European Bologna Process (Galatanu) and Romanian reform texts (Moilanen). As for scientific discourses, the next paper in this section deconstructs an ideological discourse on the didactics of French as a foreign language (Pescheux). Finally, the last paper in part three reflects on varied forms of AD at university (Defays). We hope that this book will add some fuel to continue discussing diverse forms of and approches to AD – in different languages and voices! No need to say that with the current upsurge in academic mobility, reflecting on crosscultural and crosslinguistic AD has just but started.

The effect of institutional settings on accounting conservatism – Empirical evidence from the Nordic countries and the transitional economies of Europe

The purpose of the dissertation is to investigate how different institutional settings affect accounting conservatism. These aspects are of interest because prior studies show that accounting quality is influenced not only by accounting standards, but also by incentives from the financial reporting environment. Accounting quality could be defined as the usefulness of financial reporting to investors and other parties in contractual relationships with the firm. In this thesis it is measured by a single, but important attribute, accounting conservatism. Conservatism is understood as asymmetric timeliness of loss and gain recognition. The study examines the role and the users of financial statements, and how changes in both respectively affect accounting conservatism. These two questions are explored in two different research environments, the Nordic countries and the transitional economies of Europe. The results of the dissertation indicate that the degree of accounting conservatism increases the closer the financial statement comes to fulfilling the informational role of financial reporting. Secondly, it is also implied that foreign investors demand conservative accounting numbers in order to mitigate the problem of information asymmetry. Overall, the findings suggest that earnings conservatism is useful and increases the quality of financial information for the purpose of decision-making and contracting. These results are of relevance to managers, investors and other users of financial reporting information, as well as to standard setters.

Applications of graph transformation in tools for domain-specific modeling languages

The use of domain-specific languages (DSLs) has been proposed as an approach to cost-e ectively develop families of software systems in a restricted application domain. Domain-specific languages in combination with the accumulated knowledge and experience of previous implementations, can in turn be used to generate new applications with unique sets of requirements. For this reason, DSLs are considered to be an important approach for software reuse. However, the toolset supporting a particular domain-specific language is also domain-specific and is per definition not reusable. Therefore, creating and maintaining a DSL requires additional resources that could be even larger than the savings associated with using them. As a solution, di erent tool frameworks have been proposed to simplify and reduce the cost of developments of DSLs. Developers of tool support for DSLs need to instantiate, customize or configure the framework for a particular DSL. There are di erent approaches for this. An approach is to use an application programming interface (API) and to extend the basic framework using an imperative programming language. An example of a tools which is based on this approach is Eclipse GEF. Another approach is to configure the framework using declarative languages that are independent of the underlying framework implementation. We believe this second approach can bring important benefits as this brings focus to specifying what should the tool be like instead of writing a program specifying how the tool achieves this functionality. In this thesis we explore this second approach. We use graph transformation as the basic approach to customize a domain-specific modeling (DSM) tool framework. The contributions of this thesis includes a comparison of di erent approaches for defining, representing and interchanging software modeling languages and models and a tool architecture for an open domain-specific modeling framework that e ciently integrates several model transformation components and visual editors. We also present several specific algorithms and tool components for DSM framework. These include an approach for graph query based on region operators and the star operator and an approach for reconciling models and diagrams after executing model transformation programs. We exemplify our approach with two case studies MICAS and EFCO. In these studies we show how our experimental modeling tool framework has been used to define tool environments for domain-specific languages.

Political participation beyond the vote : how the institutional context shapes patterns of political participation in 18 Western European democracies

Politiskt deltagande är en definierande del av varje demokratiskt politiskt system, även mellan valen. Men det har skett en betydande utveckling i vilka aktiviteter som uppfattas som politiskt deltagande. Det är inte enbart aktiviteter i politiska partier som är i fokus, men också olika protestaktiviteter, delaktighet i nya sociala rörelser och livsstilspolitik i form av politisk konsumtion. Politiskt deltagande mellan valen kan leda till en potentiell legitimitetskonflikt. Den potentiella konflikten mellan ansvarsutkrävande och medborgarnas aktiva medverkan har varit känd sedan länge. Representativa demokratier har genom olika institutionella mekanismer försökt konstruera ett fungerande politiskt system som förenar möjligheten för politiskt deltagande med en tydlig ansvarsstruktur. I detta sammanhang har den institutionella öppenheten haft en central position eftersom denna antas påverka hur lätt det är för medborgarna att påverka de formella beslutfattarna. Avhandlingen undersöker därmed konsekvenserna av institutionell öppenhet för olika former av politiskt deltagande. Resultaten tyder på att demokratiska staters institutionella uppbyggnad har väsentliga konsekvenser för det politiska deltagandet. Men samspelet mellan systemet och deltagandet verkar vara mera invecklat än de dominerande teorierna om politiska institutioner och deltagande ger vid handen. Institutionell öppenhet har inte den förväntade effekt beroende på om den politiska handlingen sker inom eller utanför det formella systemet, och den institutionella effekten är mera uttalad för föreningsaktivism och politisk konsumtion, vilket är de aktiviteter som ligger längst bort från det formella politiska systemet. Resultaten utmanar därmed centrala teoretiska antaganden inom forskningen om politiskt deltagande. I ljuset av de resultat som presenteras i avhandlingen framstår det som särskilt angeläget att omvärdera effekten av institutionell öppenhet.

Environmental inFluences on the Adoption of Open Innovation: Analysis of Structural, Institutional and Cultural Impacts

The concept of open innovation has recently gained widespread attention, and is particularly relevant now as many firms endeavouring to implement open innovation, face different sets of challenges associated with managing it. Prior research on open innovation has focused on the internal processes dealing with open innovation implementation and the organizational changes, already taking place or yet required in companies order to succeed in the global open innovation market. Despite the intensive research on open innovation, the question of what influences its adoption by companies in different contexts has not received much attention in studies. To fill this gap, this thesis contribute to the discussion on open innovation influencing factors by bringing in the perspective of environmental impacts, i.e. gathering data on possible sources of external influences, classifying them and testing their systemic impact through conceptual system dynamics simulation model. The insights from data collection and conceptualization in modelling are used to answer the question of how the external environment affects the adoption of open innovation. The thesis research is presented through five research papers reflecting the method triangulation based study (conducted at initial stage as case study, later as quantitative analysis and finally as system dynamics simulation). This multitude of methods was used to collect the possible external influence factors and to assess their impact (on positive/negative scale rather than numerical). The results obtained throughout the thesis research bring valuable insights into understanding of open innovation influencing factors inside a firm’s operating environment, point out the balance required in the system for successful open innovation performance and discover the existence of tipping point of open innovation success when driven by market dynamics and structures. The practical implications on how firms and policy-makers can leverage environment for their potential benefits are offered in the conclusions.

Frequency-Domain and Wide-Pulse Time-Domain Measurements of Lanthanide Luminescence and Lanthanide-Based Resonance Energy Transfer

Resonance energy transfer (RET) is a non-radiative transfer of the excitation energy from the initially excited luminescent donor to an acceptor. The requirements for the resonance energy transfer are: i) the spectral overlap between the donor emission spectrum and the acceptor absorption spectrum, ii) the close proximity of the donor and the acceptor, and iii) the suitable relative orientations of the donor emission and the acceptor absorption transition dipoles. As a result of the RET process the donor luminescence intensity and the donor lifetime are decreased. If the acceptor is luminescent, a sensitized acceptor emission appears. The rate of RET depends strongly on the donor–acceptor distance (r) and is inversely proportional to r6. The distance dependence of RET is utilized in binding assays. The proximity requirement and the selective detection of the RET-modified emission signal allow homogeneous separation free assays. The term lanthanide-based RET is used when luminescent lanthanide compounds are used as donors. The long luminescence lifetimes, the large Stokes’ shifts and the intense, sharply-spiked emission spectra of the lanthanide donors offer advantages over the conventional organic donor molecules. Both the organic lanthanide chelates and the inorganic up-converting phosphor (UCP) particles have been used as donor labels in the RET based binding assays. In the present work lanthanide luminescence and lanthanide-based resonance energy transfer phenomena were studied. Luminescence lifetime measurements had an essential role in the research. Modular frequency-domain and time-domain luminometers were assembled and used successfully in the lifetime measurements. The frequency-domain luminometer operated in the low frequency domain ( 100 kHz) and utilized a novel dual-phase lock-in detection of the luminescence. One of the studied phenomena was the recently discovered non-overlapping fluorescence resonance energy transfer (nFRET). The studied properties were the distance and temperature dependences of nFRET. The distance dependence was found to deviate from the Förster theory and a clear temperature dependence was observed whereas conventional RET was completely independent of the temperature. Based on the experimental results two thermally activated mechanisms were proposed for the nFRET process. The work with the UCP particles involved the measurement of the luminescence properties of the UCP particles synthesized in our laboratory. The goal of the UCP particle research is to develop UCP donor labels for binding assays. In the present work the effect of the dopant concentrations and the core–shell structure on the total up-conversion luminescence intensity, the red–green emission ratio, and the luminescence lifetime was studied. Also the non-radiative nature of the energy transfer from the UCP particle donors to organic acceptors was demonstrated for the first time in aqueous environment and with a controlled donor–acceptor distance.

Finnish Institutional Innovation Support Policies from Russian Entrepreneurs' Perspective: Establishing Cross-Border Technology Oriented Start-Up Firm

The purpose of this thesis is to study how Russian entrepreneurs perceive Finnish institutional environment and innovation support policies provided in the country, as well as to present a practical example in form of a case study of one technology oriented start-up firm which was established in Finland by Russian entrepreneurs. The empirical research of the thesis is conducted qualitatively in two parts. First part is conducted through online questionnaire with open questions in order to review the perceptions of Russian entrepreneurs in general. Second part is based on personal interviews with case company’s founders with the focus on the process of establishing the company in Finland. In the first part of the empirical research, five Russian start-up firms were contacted, and four responses were received. All of these responses were qualified for further analysis. The findings of the first part of the research reveal that Russian entrepreneurs have rather positive attitudes towards Finnish institutional innovation support policies. However, most of the entrepreneurs stated that they are unlikely to create their presence in Finland. As an outcome of the second part of the research, the process of establishing a case company in Finland is illustrated. In order to be able to establish companies in Finland, Russian entrepreneurs who have a permanent residence outside European Economic Area (EEA) are required to apply for a permission to perform business operations in the country. In addition, the established company must engage in improving the economical stand of the country by creating new work places, raising tax revenues, develop technologies and generate innovations in the country.