996 resultados para Inferior turbinate
Resumo:
Objetivou-se descrever e avaliar a influência da renda sobre a participação da alimentação fora do domicílio no Brasil. Utilizaram-se dados coletados pela Pesquisa de Orçamentos Familiares realizada em 2002/2003 (POF 2002/2003), pelo Instituto Brasileiro de Geografia e Estatística. Analisaram-se os registros dos gastos com aquisições de alimentos e bebidas consumidos fora do domicílio. A associação entre a participação da alimentação fora do domicílio e a renda, ajustada para atributos sócio-demográficos, foi estudada por meio de modelos de regressão utilizados para estimação de coeficientes de elasticidade-renda. A alimentação fora do domicílio representou 21% do total dos gastos com alimentação; destaque-se que o incremento de 10% na renda aumentaria em 3% a participação da alimentação fora do domicílio. O efeito da renda sobre a participação da alimentação fora, ainda que sempre positivo, diminui conforme elevação da renda, sendo alto nos domicílios com renda inferior a R$68,70 per capita/mês. Há influência da renda nos gastos com alimentação fora do domicílio, assim a evolução favorável da renda resultará em aumento dessa forma de se alimentar.
Resumo:
The exacerbation of the oxidative stress and of the polyol pathway which impair damage myenteric plexus are metabolic characteristics of diabetes. The ascorbic acid (AA) is an antioxidant and an aldose reductase inhibitor, which may act as neuroprotector. The effects of AA supplementation on the density and cellular body profile area (CP) of myenteric neurons in STZ-induced diabetes in rats were assessed. Four groups with five animals each were formed: normoglycemic (C); diabetic (D); AA-treated diabetic (DS) and AA-treated normoglycemic (CS). Dosagen of 50mg of AA were given, three times a week, for each animal (group DS and CS). Ninety days later and after euthanasia, the ileum was collected and processed for the NADPH-diaphorase technique. There were no differences (P>0.05) in the neuronal density among the groups. The CP area was lower (P<0.05) in the DS and CS groups, with a higher incidence of neurons with a CP area exceeding 200µm² for groups C and D. The AA had no influence on the neuronal density in the ileum but had a neuroprotective effect, preventing the increase in the CP area and allowing a higher number of neurons with a CP area with less than 200µm².
Resumo:
Avaliou-se a inclusão de diferentes níveis de carne de ovelhas de descarte (animais Texel × Ile de France com idade superior a seis anos) em relação à carne suína sobre a qualidade de embutidos fermentados do tipo salame. Os embutidos foram elaborados com 0, 15, 35, 55 ou 75% de carne da perna, paleta e pescoço das ovelhas, acrescidos de pernil suíno e 10% de toucinho suíno. A evolução do pH e da atividade de água (a w) foi avaliada nos dias zero, três, sete e 14 após o embutimento. Após a maturação dos salames, foram determinadas, ainda, a perda de peso, a qualidade microbiológica e as características sensoriais dos embutidos prontos. A inclusão de carne ovina na formulação não alterou a evolução do pH e a w. Entretanto, influenciou (P<0,05) os valores finais de pH, a w e a perda de peso. Os embutidos com carne ovina na formulação apresentaram valores de pH final inferiores àquele observado para o embutido elaborado somente com carne suína. Este último apresentou a w inferior e maior perda de peso, em comparação ao produto contendo 15% de carne ovina na formulação. Todas as formulações atenderam a legislação quanto à qualidade microbiológica. Na análise sensorial, o embutido elaborado com 15% de carne ovina foi considerado superior ao embutido elaborado somente com carne suína para os aspectos cor, sabor e textura; contudo, não diferiu dos demais embutidos elaborados com carne ovina. Assim, é possível elaborar embutido fermentado com até 75% de carne de ovelhas de descarte na formulação.
Resumo:
O suprimento de tomates para processamento industrial é uma atividade relativamente complexa. Plantas industriais de larga escala necessitam de elevados volumes diários de matéria-prima. Por outro lado, há alta perecibilidade dos frutos e a colheita ainda é predominantemente manual. Um modelo matemático foi desenvolvido com o propósito de entender objetivamente o processo de suprimento de tomate e, também, vislumbrar possibilidades de sua otimização. A simulação a partir do modelo pode gerar cenários que, quando comparados com o desempenho efetivamente observado em campo, evidenciam a importância da gestão acurada, com a presença de potenciais ganhos financeiros expressivos na cadeia de suprimentos a partir da redução de tempos, perdas e custos. As perdas de produto poderiam ser reduzidas de mais de 2% para algo inferior a 1%. A menor capacidade ociosa traduzir-se-ia em um menor custo de oportunidade e aumento de receita. Para uma fábrica com um consumo de tomates de 336 mil toneladas por ano, a melhoria no suprimento de matéria-prima poderia resultar em ganhos estimados em R$ 6 milhões por ano.
Resumo:
OBJETIVO: Avaliar o consumo alimentar e o padrão de refeições de adolescentes, São Paulo, Brasil. MÉTODOS: Por meio do Recordatório de 24 horas, avaliou-se o consumo energético total, de macronutrientes, cálcio, ferro e vitamina A e a omissão de refeições ou sua substituição por lanche, de adolescentes de uma escola pública de Ilhabela. Comparou-se o consumo alimentar por grupo com a Pirâmide Alimentar do adolescente. Foi realizada análise descritiva, aplicou-se o teste Qui-quadrado (p < 0,005), além de análise qualitativa. RESULTADOS: o consumo energético total foi inferior ao estimado para 66 por cento dos adolescentes, o percentual de carboidratos foi abaixo do recomendado e o de lipídios e proteínas acima do recomendado. Houve omissão do café da manhã entre 21 por cento dos adolescentes e um terço deles substituiu almoço ou jantar por lanche. CONCLUSÃO: Os adolescentes apresentaram insuficiência calórica na dieta e baixo consumo de frutas, verduras e legumes; o padrão de refeições foi satisfatório, mas o café da manhã deve ser incentivado
Resumo:
OBJETIVO: Estabelecer a evolução da prevalência de desnutrição na população brasileira de crianças menores de cinco anos de idade entre 1996 e 2007 e identificar os principais fatores responsáveis por essa evolução.MÉTODOS: Os dados analisados procedem de inquéritos "Demographic Health Surveys" realizados no Brasil em 1996 e 2006/7 em amostras probabilísticas de cerca de 4 mil crianças menores de cinco anos. A identificação dos fatores responsáveis pela variação temporal da prevalência da desnutrição (altura-para-idade inferior a -2 escores z; padrão OMS 2006) considerou mudanças na distribuição de quatro determinantes potenciais do estado nutricional. Modelagem estatística da associação independente entre determinante e risco de desnutrição em cada inquérito e cálculo de frações atribuíveis parciais foram utilizados para avaliar a importância relativa de cada fator na evolução da desnutrição infantil. RESULTADOS: A prevalência da desnutrição foi reduzida em cerca de 50%: de 13,5% (IC 95%: 12,1%;14,8%) em 1996 para 6,8% (5,4%;8,3%) em 2006/7. Dois terços dessa redução poderiam ser atribuídos à evolução favorável dos quatro fatores estudados: 25,7% ao aumento da escolaridade materna; 21,7% ao crescimento do poder aquisitivo das famílias; 11,6% à expansão da assistência à saúde e 4,3% à melhoria nas condições de saneamento.CONCLUSÕES: A taxa anual de declínio de 6,3% na proporção de crianças com déficits de altura-para-idade indica que em cerca de mais dez anos a desnutrição infantil poderia deixar de ser um problema de saúde pública no Brasil. A conquista desse resultado dependerá da manutenção das políticas econômicas e sociais que têm favorecido o aumento do poder aquisitivo dos mais pobres e de investimentos públicos que permitam completar a universalização do acesso da população brasileira aos serviços essenciais de educação, saúde e saneamento
Resumo:
O objetivo deste estudo foi verificar a necessidade energética estimada, o valor energético e a adequação de macronutrientes da alimentação dos idosos de Fortaleza. Este estudo é epidemiológico, transversal, com coleta de dados primários. As variáveis de estudo foram: necessidade energética estimada, valor energético da alimentação e adequação dos macronutrientes da alimentação. O inquérito alimentar utilizado para obtenção do valor energético da alimentação (VEA) foi o recordatório de 24 horas (R24). O cálculo da necessidade energética estimada (NEE) da população foi realizado a partir das equações propostas pelo Institute of Medicine (IOM, 2002). A adequação dos macronutrientes da alimentação foi verificada a partir dos valores propostos nos intervalos da distribuição aceitável de macronutrientes (IOM, 2002). Foi avaliada a alimentação de 458 idosos (153 homens e 305 mulheres). A média etária dos idosos foi 70,9 anos (DP= 7,9 anos). O valor energético médio da alimentação dos homens foi superior ao das mulheres. O valor energético médio da alimentação dos idosos foi inferior ao valor médio da necessidade energética estimada, tanto dos homens como das mulheres (p=0,000). Quanto à proporção de proteína da alimentação, a maioria dos idosos (91,7 por cento), apresentou valores adequados. A proporção de carboidratos da alimentação, também se mostrou adequada na maioria das dietas (59,8 por cento). O consumo de alimentação com adequada proporção de lipídio foi verificado em 53,9 por cento dos idosos. Sendo assim, conclui-se que os idosos de Fortaleza apresentam alimentação com valor energético insuficiente em relação à necessidade energética estimada para os mesmos
Resumo:
Background and Purpose: A nonfunctioning inflammatory kidney is a challenging surgical condition for urologists. Some investigators recommend open surgery because of the surgical difficulties caused by the inflammatory process, whereas others try to apply the advantages of a ""simple"" non-hand-assisted laparoscopic approach. We report our experience with simple laparoscopic nephrectomy for inflammatory kidney management. Patients and Methods: From July 2002 through December 2006, 50 pure laparoscopic nephrectomies were performed for inflammatory kidney ( 43 because of pyelonephritis, 5 for xanthogranulomatous pyelonephritis (XGP), and 2 for pyonephrosis). Histopathologic analysis was the criterion used for inflammatory kidney diagnosis. Pain or recurrent urinary tract infection associated with a nonfunctioning excluded kidney was the eligibility criterion for the procedure. Preoperatively, all patients underwent complete image and functional renal assessment. Morcellation was used to remove surgical specimens. Conversion index, surgical difficulties, operative time, and postoperative complications were evaluated. Results: Conversion was performed in 14 of 50 (28%) patients, including two with XGP and one with pyonephrosis. Adhesions, vascular (two inferior vena cava) lesions, and intestinal lesions (two colon) were the main causes of conversion. Acute pancreatitis developed in one patient, and one patient had a wound infection. Reoperations were unnecessary, and no deaths occurred. Conclusion: Pure laparoscopic nephrectomy was successful in 72% of patients with inflammatory kidneys. The laparoscopic dissection was useful even in those cases converted to open surgery. This is a high-risk procedure, however, and both surgeon and patient must be aware of that before the decision is made for this approach.
Resumo:
Background and Purpose: The right kidney has been less frequently used in live donor nephrectomy, because of the shorter length of the right renal vein (RRV) that is associated with technical difficulties and higher rates of venous thrombosis. In live open donor or deceased donor transplant nephrectomy, an additional cuff of the inferior vena cava is usually removed, but this is a more difficult and risky maneuver in laparoscopic nephrectomy. For this reason, laparoscopic right nephrectomy (LRN) for renal transplantation (RT) is not frequently performed in most medical institutions. We evaluate the difference between RRV and left renal vein (LRV) lengths in cadavers, as harvested for RT by three clamping methods. Our objective was to obtain information that could clarify when LRN for RT should be encouraged or avoided with regard to conventional surgery. Materials and Methods: Ninety adult fresh unfrozen cadavers were randomly divided into three groups of 30, according to the clamping device used: Satinsky, stapler, and Hem-o-lok clip. The abdominal viscera were removed through a median xyphopubic incision, and the veins were measured on the bench. Two lateral limits were used: The renal hilum and the tangential line of the renal poles. As for medial limits, the inferior vena cava or the laparoscopic clipping device on the RRV were used on the right side, while on the LRV, the medial border of the emergence of the adrenal vein was considered. After section of the renal vein, a slight traction of the extremity was applied for the measurement. All measurements were obtained three times using a metallic millimetric ruler, and the arithmetic mean was considered. The chi-square, one-way analysis of variance, and paired t tests were used for statistical analysis. Statistical significance was accepted at P <= 0.05. Results: The groups of cadavers were homogeneous in demographic characteristics. Regardless of the clamping method and considering the useful length of the LRV, the RRV was statistically smaller. The evaluation of the vein length did not depend on the lateral limit considered. Independent of the clamping method, on both sides, the lengths after the vein section were larger than before the section, a fact attributed to traction. Use of a stapler and a single Hem-o-lok presented the same waste of vein length on the right side. On average, the RRV was 13.7% shorter than the LRV. Conclusions: With the wide acceptance of laparoscopic live donor nephrectomy, the length difference between the veins of both kidneys is an important issue, and the right kidney is therefore used less than the left, compared with conventional surgery. This article represents the first step to quantify the anatomic length of renal veins in different situations. Certainly, more imagenologic or surgical studies should be carried out before decisions can be made for better selection of patients for LRN.
Resumo:
Objective: To measure condylar displacement between centric relation (CR) and maximum intercuspation (MIC) in symptomatic and asymptomatic subjects. Materials and Methods: The sample comprised 70 non-deprogrammed individuals, divided equally into two groups, one symptomatic and the other asymptomatic, grouped according to the research diagnostic criteria for temporomandibular disorders (RDC/TMD). Condylar displacement was measured in three dimensions with the condylar position indicator (CPI) device. Dahlberg's index, intraclass correlation coefficient, repeated measures analysis of variance, analysis of variance, and generalized estimating equations were used for statistical analysis. Results: A greater magnitude of difference was observed on the vertical plane on the left side in both symptomatic and asymptomatic individuals (P = .033). The symptomatic group presented higher measurements on the transverse plane (P = .015). The percentage of displacement in the mesial direction was significantly higher in the asymptomatic group than in the symptomatic one (P = .049). Both groups presented a significantly higher percentage of mesial direction on the right side than on the left (P = .036). The presence of bilateral condylar displacement (left and right sides) in an inferior and distal direction was significantly greater in symptomatic individuals (P = .012). However, no statistical difference was noted between genders. Conclusion: Statistically significant differences between CR and MIC were quantifiable at the condylar level in asymptomatic and symptomatic individuals. (Angle Orthod. 2010;80:835-842.)
Resumo:
The aim of this study was to investigate the effects of knowledge of results (KR) frequency and task complexity on motor skill acquisition. The task consisted of throwing a bocha ball to place it as close as possible to the target ball. 120 students ages 11 to 73 years were assigned to one of eight experimental groups according to knowledge of results frequency (25, 50, 75, and 100%) and task complexity (simple and complex). Subjects performed 90 trials in the acquisition phase and 10 trials in the transfer test. The results showed that knowledge of results given at a frequency of 25% resulted in an inferior absolute error than 50% and inferior variable error than 50, 75, and 100 I frequencies, but no effect of task complexity was found.
Resumo:
The evaporators of sugar plants in Brazil have used carbon steel intensively because of it is, a low priced material, which possesses inferior corrosion resistance. The materials more indicated for the substitution of carbon steel are stainless steels, however they are considered expensive. The environmental and financial performances of evaporator pipes constructed with carbon steel and with types AISI 304 444 and 439 stainless steel were evaluated. For the environmental evaluation, the Life Cycle Assessment (LCA) methodology Was used and it, revealed that stainless steel is more environmentally efficient than carbon steel. The life cycle costing (LCC) technique was the tool chosen for the financial evaluation and it showed that stainless steel is a better investment option compared to carbon steel. The results also indicate that LCA and LCC methodologies must be used together Therefore, it can he seen that safer environmental products can come to be the most profitable investment options.
Resumo:
This work aims at proposing the use of the evolutionary computation methodology in order to jointly solve the multiuser channel estimation (MuChE) and detection problems at its maximum-likelihood, both related to the direct sequence code division multiple access (DS/CDMA). The effectiveness of the proposed heuristic approach is proven by comparing performance and complexity merit figures with that obtained by traditional methods found in literature. Simulation results considering genetic algorithm (GA) applied to multipath, DS/CDMA and MuChE and multi-user detection (MuD) show that the proposed genetic algorithm multi-user channel estimation (GAMuChE) yields a normalized mean square error estimation (nMSE) inferior to 11%, under slowly varying multipath fading channels, large range of Doppler frequencies and medium system load, it exhibits lower complexity when compared to both maximum likelihood multi-user channel estimation (MLMuChE) and gradient descent method (GrdDsc). A near-optimum multi-user detector (MuD) based on the genetic algorithm (GAMuD), also proposed in this work, provides a significant reduction in the computational complexity when compared to the optimum multi-user detector (OMuD). In addition, the complexity of the GAMuChE and GAMuD algorithms were (jointly) analyzed in terms of number of operations necessary to reach the convergence, and compared to other jointly MuChE and MuD strategies. The joint GAMuChE-GAMuD scheme can be regarded as a promising alternative for implementing third-generation (3G) and fourth-generation (4G) wireless systems in the near future. Copyright (C) 2010 John Wiley & Sons, Ltd.
Resumo:
This research was carried out to evaluate and compare 11 organic honey samples and six non organic honey samples, respectively, harvested from islands of the triple frontier (Sao Paulo, Parana and Mato Grosso do Sul states) and from the state of Parana, Brazil. The samples were studied for the presence of coliforms from 35 degrees C, to 45 degrees C and the enumeration of moulds and yeast, a minimum of 1.9 x 10(2) and a maximum of 1.1 x 10(3) CFU/g were observed in organic honey and a minimum of 1.8 x 10(1) and a maximum of 2.5 x 10(2) CFU/g were in non organic honey. In this studied region, the organic honey presented a microbiological quality inferior to the non organic honey.
Resumo:
MDF panels from eucalyptus wood fibers were manufactured in laboratory and industrial production and had their apparent density profile determined by X-ray densitometry. The MDF panels apparent density parameters (maximum density of the superior and inferior faces; medium and minimum density) were determined and compared. The results indicated that the density values of the MDF panels made in the laboratory and in industrial line did not show significant statistical differences, indicating the similarities in the pressing phase of the fibers of both kinds. However, for MDF panels of laboratory and production line, the values of maximum, mean and minimum densities showed statistically significant correlations. The determination of the density profile for MDF panels by X-ray densitometry is important for the evaluation of pressing phase and other variables of the industrial process of production, as well for the determination of the technological properties.