Artificial urinary sphincter implantation in the irradiated patient:safety, efficacy and satisfaction

Objective To compare the long-term outcome of artificial urinary sphincter (AUS) implantation in patients after prostatectomy, with and with no history of previous irradiation.

Patients and methods The study included 98 men (mean age 68 years) with urinary incontinence after prostatectomy for prostate cancer (85 radical, 13 transurethral resection) who had an AUS implanted. Twenty-two of the patients had received adjuvant external beam irradiation before AUS implantation. Over a mean (range) follow-up of 46 (5-118) months, the complication and surgical revision rates were recorded and compared between irradiated and unirradiated patients. The two groups were also compared for the resolution of incontinence and satisfaction, assessed using a questionnaire.

Results Overall, surgical revision was equally common in irradiated (36%) and unirradiated (24%) patients. After activating the AUS, urethral atrophy, infection and erosion requiring surgical revision were more common in irradiated patients (41% vs 11%; P <0.05); 70% of patients reported a significant improvement in continence, regardless of previous irradiation. Patient satisfaction remained high, with >80% of patients stating that they would undergo surgery again and/or recommend it to others, despite previous Irradiation and/or the need for surgical revision.

Conclusions Despite higher complication and surgical revision rates in patients who have an AUS implanted and have a history of previous Irradiation, the long-term continence and patient satisfaction appear not to be adversely affected.

THE ARTIFICIAL URINARY SPHINCTER - A NEW SOLUTION FOR INCONTINENT PATIENTS

Treatment of urinary incontinence with the artificial urinary sphincter has been available in centres such as London and Liverpool for a number of years. This service is now available in the department of urology of the Belfast City Hospital. Twelve patients have had successful implantation of an artificial urinary sphincter for urinary incontinence, and ten are now fully continent. One patient with Wegener's granulomatosis developed active disease in his urethra which has precluded activation of the device. One patient has had the device removed because of erosion into the urethra.

Predicting forest attributes In southeast Alaska using artificial neural networks

Artificial neural network (ANN) methods are used to predict forest characteristics. The data source is the Southeast Alaska (SEAK) Grid Inventory, a ground survey compiled by the USDA Forest Service at several thousand sites. The main objective of this article is to predict characteristics at unsurveyed locations between grid sites. A secondary objective is to evaluate the relative performance of different ANNs. Data from the grid sites are used to train six ANNs: multilayer perceptron, fuzzy ARTMAP, probabilistic, generalized regression, radial basis function, and learning vector quantization. A classification and regression tree method is used for comparison. Topographic variables are used to construct models: latitude and longitude coordinates, elevation, slope, and aspect. The models classify three forest characteristics: crown closure, species land cover, and tree size/structure. Models are constructed using n-fold cross-validation. Predictive accuracy is calculated using a method that accounts for the influence of misclassification as well as measuring correct classifications. The probabilistic and generalized regression networks are found to be the most accurate. The predictions of the ANN models are compared with a classification of the Tongass national forest in southeast Alaska based on the interpretation of satellite imagery and are found to be of similar accuracy.

Modeling of titanium alloys by using artificial neural networks

Titanium alloy exhibits an excellent combination of bio-compatibility, corrosion resistance, strength and toughness. The microstructure of an alloy influences the properties. The microstructures depend mainly on alloying elements, method of production, mechanical, and thermal treatments. The relationships between these variables and final properties of the alloy are complex, non-linear in nature, which is the biggest hurdle in developing proper correlations between them by conventional methods. So, we developed artificial neural networks (ANN) models for solving these complex phenomena in titanium alloys.

In the present work, ANN models were used for the analysis and prediction of the correlation between the process parameters, the alloying elements, microstructural features, beta transus temperature and mechanical properties in titanium alloys. Sensitivity analysis of trained neural network models were studied which resulted a better understanding of relationships between inputs and outputs. The model predictions and the analysis are well in agreement with the experimental results. The simulation results show that the average output-prediction error by models are less than 5% of the prediction range in more than 95% of the cases, which is quite acceptable for all metallurgical purposes.

Artificial Neural Network for Compositional Ionic Liquid Viscosity Prediction

Being a new generation of green solvents and high-tech reaction media of the future, ionic liquids have increasingly attracted much attention. Of particular interest in this context are room temperature ionic liquids (in short as ILs in this paper). Due to the relatively high viscosity, ILs is expected to be used in the form of solvent diluted mixture with reduced viscosity in industrial application, where predicting the viscosity of IL mixture has been an important research issue. Different IL mixture and many modelling approaches have been investigated. The objective of this study is to provide an alternative model approach using soft computing technique, i.e., artificial neural network (ANN) model, to predict the compositional viscosity of binary mixtures of ILs [C _n-mim][NTf ₂] with n=4, 6, 8, 10 in methanol and ethanol over the entire range of molar fraction at a broad range of temperatures from T=293.0-328.0K. The results show that the proposed ANN model provides alternative way to predict compositional viscosity successfully with highly improved accuracy and also show its potential to be extensively utilized to predict compositional viscosity taking account of IL alkyl chain length, as well as temperature and compositions simultaneously, i.e., more complex intermolecular interactions between components in which it would be hard or impossible to establish the analytical model. This illustrates the potential application of ANN in the case that the physical and thermodynamic properties are highly non-linear or too complex. © 2012 Copyright the authors.

Artificial neural network model to predict compositional viscosity over a broad range of temperatures

The objective of this study is to provide an alternative model approach, i.e., artificial neural network (ANN) model, to predict the compositional viscosity of binary mixtures of room temperature ionic liquids (in short as ILs) [C _n-mim] [NTf ₂] with n=4, 6, 8, 10 in methanol and ethanol over the entire range of molar fraction at a broad range of temperatures from T=293.0328.0K. The results show that the proposed ANN model provides alternative way to predict compositional viscosity successfully with highly improved accuracy and also show its potential to be extensively utilized to predict compositional viscosity over a wide range of temperatures and more complex viscosity compositions, i.e., more complex intermolecular interactions between components in which it would be hard or impossible to establish the analytical model. © 2010 IEEE.

Non-parametric bill of quantities estimation of concrete road bridges' superstructure: an artificial neural networks approach

Bridge construction responds to the need for environmentally friendly design of motorways and facilitates the passage through sensitive natural areas and the bypassing of urban areas. However, according to numerous research studies, bridge construction presents substantial budget overruns. Therefore, it is necessary early in the planning process for the decision makers to have reliable estimates of the final cost based on previously constructed projects. At the same time, the current European financial crisis reduces the available capital for investments and financial institutions are even less willing to finance transportation infrastructure. Consequently, it is even more necessary today to estimate the budget of high-cost construction projects -such as road bridges- with reasonable accuracy, in order for the state funds to be invested with lower risk and the projects to be designed with the highest possible efficiency. In this paper, a Bill-of-Quantities (BoQ) estimation tool for road bridges is developed in order to support the decisions made at the preliminary planning and design stages of highways. Specifically, a Feed-Forward Artificial Neural Network (ANN) with a hidden layer of 10 neurons is trained to predict the superstructure material quantities (concrete, pre-stressed steel and reinforcing steel) using the width of the deck, the adjusted length of span or cantilever and the type of the bridge as input variables. The training dataset includes actual data from 68 recently constructed concrete motorway bridges in Greece. According to the relevant metrics, the developed model captures very well the complex interrelations in the dataset and demonstrates strong generalisation capability. Furthermore, it outperforms the linear regression models developed for the same dataset. Therefore, the proposed cost estimation model stands as a useful and reliable tool for the construction industry as it enables planners to reach informed decisions for technical and economic planning of concrete bridge projects from their early implementation stages.

Factores que influenciam o peso e crescimento de cabritos da raça Murciana-granadina, em aleitamento artificial

A exploração caprina de leite tem evoluído no sentido de alguma intensificação, com recurso a raças de elevado potencial produtivo, de que é exemplo a raça Murciana- Granadina. O leite constitui a principal fonte de receita destas explorações. Complementarmente, vendem animais para carne e, as de melhor nível genético, animais para reprodutores. Analisaram-se os pesos de 241 cabritos da raça Murciana-Granadina, numa exploração comercial, com o objectivo de quantificar os pesos e crescimento de cabritos, e identificar os factores que os influenciam. Os cabritos foram aleitados artificialmente, em regime ad libitum, com leite de substituição comercial, dispondo ainda de concentrado comercial, feno de luzerna e palha. Os cabritos foram pesados ao nascimento e, posteriormente, semanalmente, até aos 60 dias de idade. Calcularam-se os respetivos pesos ajustados, bem como os ganhos médios diários, a diferentes idades padrão. Procedeu-se a uma análise de variância com um modelo linear que incluiu os efeitos da época de parto, tipo de parto, sexo e idade da cabra. Foram registados pesos superiores nos partos simples e duplos, relativamente aos triplos, e nos machos, relativamente às fêmeas. Os ganhos médios diários, a partir do mês de idade, registaram valores inferiores na época inverno-primavera, comparativamente com a época primavera-verão. Dairy goat farming has evolved towards intensification, with increased use of high milk-yielding breeds, including the Murciano-Granadina breed. Milk is the main source of farm income. Secondary income sources are the sale of animals for meat and, in genetically superior herds, the sale of breeding animals. The weights of 241 commercial farms artificially reared Murciano-Granadina kids were analyzed with the objective of quantifying weight and growth and identifying variation factors. Kids were artificially reared to weaning, on ad libitum commercial milk replacer, commercial concentrate, lucerne hay and straw. Kids were weighed at birth and at weekly intervals until 60 days of age. Age adjusted weights and growth-rates were calculated. A variance analysis was performed with a model including the effects of season of birth, number of kids per kidding, sex and age of dam. Single and twin-born kids had higher weights than triplets, and males had higher weights than females. Average daily gain after one month of age was lower for kids born in winter-spring than for those born in spring-summer

Logic Programming and Artificial Neural Networks in Pharmacological Screening of Schinus Essential Oils

Some plants of genus Schinus have been used in the folk medicine as topical antiseptic, digestive, purgative, diuretic, analgesic or antidepressant, and also for respiratory and urinary infections. Chemical composition of essential oils of S. molle and S. terebinthifolius had been evaluated and presented high variability according with the part of the plant studied and with the geographic and climatic regions. The pharmacological properties, namely antimicrobial, anti-tumoural and anti-inflammatory activities are conditioned by chemical composition of essential oils. Taking into account the difficulty to infer the pharmacological properties of Schinus essential oils without hard experimental approach, this work will focus on the development of a decision support system, in terms of its knowledge representation and reasoning procedures, under a formal framework based on Logic Programming, complemented with an approach to computing centered on Artificial Neural Networks and the respective Degree-of-Confidence that one has on such an occurrence.

Design e desenvolvimento de equipamentos de iluminação técnica

Este documento é uma sinopse das atividades desenvolvidas e, conhecimentos adquiridos ao longo do estágio na empresa Lightenjin, Sistemas de Iluminação, Lda. e, surge em forma de relatório de projeto. O primeiro projeto foi o desenvolvimento de uma família de candeeiros. O segundo e principal projeto foi a criação e desenvolvimento de um projetor para aplicação em calha eletrificada, com as devidas restrições do Project brief apresentado pela empresa. O terceiro projeto foi o desenvolvimento de um projetor Downlight de encastrar. Houve outras tarefas ligadas à modelação de componentes, desenhos técnicos, manuais de instruções, fichas técnicas e prototipagem rápida. Em todos os projetos foi utilizada a metodologia de trabalho apresentada.