A contribuition to the study of channel coding in wireless communication systems

Pós-graduação em Engenharia Elétrica - FEIS

Sistema de supervisão e controle de irrigação utilizando técnicas de inteligência artificial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Metodologia para o despacho de potência reativa visando o controle de tensão baseado em algoritmos genéticos

Este trabalho tem como objetivo apresentar um aplicativo para auxiliar no planejamento de sistemas elétricos, através de uma metodologia para controle de tensão e minimização das perdas, através da otimização da injeção de reativos, mantendo a tensão nos barramentos dentro de limites pré estabelecidos. A metodologia desenvolvida é baseada em um sistema hibrido, que utiliza inteligência computacional baseada em um algoritmo genético acoplado a um programa de fluxo de carga (ANAREDE), que interagem para produzir uma solução ótima. Os resultados obtidos mostram que a técnica baseada no algoritmo genético é bem adequada ao tipo de problema ora tratado referente a minimização de perdas reativas e a melhoria do perfil da tensão em redes elétricas, sendo este atualmente um problema crítico em parte do Sistema Interligado Nacional (SIN).

Uma metodologia para predição do campo elétrico de radiodifusão sonora em ondas médias utilizando inferências bayesianas

A adoção de sistemas digitais de radiodifusão sonora, que estão em fase de testes no país, permite realizar novos estudos visando um melhor planejamento para a implementação dessas novas emissoras. O que significa reavaliar os principais modelos de radiopropagação existentes ou propor novas alternativas para atender as demandas inerentes dos sistemas digitais. Os modelos atuais, conforme Recomendações ITU-R P. 1546 e ITU-R P. 1812, não condizem fielmente com a realidade de algumas regiões do Brasil, principalmente com as regiões de clima tropical, como a Região Amazônica, seja pelo elevado índice pluviométrico seja pela vasta flora existente. A partir dos modelos adequados ao canal de propagação, torna-se viável desenvolver ferramentas de planejamento de cobertura mais precisas e eficientes. A utilização destas ferramentas é cabível tanto para a ANATEL, para a elaboração dos planos básicos de distribuição de canais quanto para os radiodifusores. No presente trabalho é apresentada uma metodologia utilizando a inteligência computacional, baseada em Inferênciass Baysianas, para predição da intensidade de campo elétrico, a qual pode ser aplicada ao planejamento ou expansão de áreas de cobertura em sistemas de radiodifusão para frequências na faixa de ondas médias (de 300 kHz a 3MHz). Esta metodologia gera valores de campo elétrico estimados a partir dos valores de altitude do terreno (através de análises de tabelas de probabilidade condicional) e estabelece a comparação destes com valores de campo elétrico medidos. Os dados utilizados neste trabalho foram coletados na região central do Brasil, próximo à cidade de Brasília. O sinal transmitido era um sinal de rádio AM transmitido na frequência de 980 kHz. De posse dos dados coletados durante as campanhas de medição, foram realizadas simulações utilizando tabelas de probabilidade condicional geradas por Inferências Bayesianas. Assim, é proposto um método para predizer valores de campo elétrico com base na correlação entre o campo elétrico medido e altitude, através da utilização de inteligência computacional. Se comparados a inúmeros trabalhos existentes na literatura que têm o mesmo objetivo, os resultados encontrados neste trabalho validam o uso da metodologia para determinar o campo elétrico de radiodifusão sonora em ondas médias utilizando Inferências Bayesianas.

Separation of satured and unsaturated fatty acids from palm fatty acids distillates in continuous multistage countercurrent columns with supercritical carbon dioxide as solvent: a process design methodology

In this work the separation of multicomponent mixtures in counter-current columns with supercritical carbon dioxide has been investigated using a process design methodology. First the separation task must be defined, then phase equilibria experiments are carried out, and the data obtained are correlated with thermodynamic models or empirical functions. Mutual solubilities, Ki-values, and separation factors aij are determined. Based on this data possible operating conditions for further extraction experiments can be determined. Separation analysis using graphical methods are performed to optimize the process parameters. Hydrodynamic experiments are carried out to determine the flow capacity diagram. Extraction experiments in laboratory scale are planned and carried out in order to determine HETP values, to validate the simulation results, and to provide new materials for additional phase equilibria experiments, needed to determine the dependence of separation factors on concetration. Numerical simulation of the separation process and auxiliary systems is carried out to optimize the number of stages, solvent-to-feed ratio, product purity, yield, and energy consumption. Scale-up and cost analysis close the process design. The separation of palmitic acid and (oleic+linoleic) acids from PFAD-Palm Fatty Acids Distillates was used as a case study.

Development of a Methodology and Evaluation of Pesticides Against Aceria litchii and Its Predator Phytoseius intermedius (Acari: Eriophyidae, Phytoseiidae)

The litchi erineum mite, Aceria litchii (Keifer), is the major pest of litchi, Litchi chinensis Sonnerat (Sapindaceae). This study evaluated the effect of 11 pesticides on the survival of A. litchii as well as on the survival and reproduction of Phytoseius intermedius Evans& McFarlane, the predator most found in association with it in Brazil. The containment of A. litchii in small petri dishes whose bottoms were covered with a solidified paste made of a mixture of gypsum and activated charcoal (9: 1 in volume), kept humid, was shown to be adequate for this type of study. For the evaluation of the effect of pesticides on A. litchii, mites leaving the erinia from the pieces of litchi leaves (removed from the plants approximate to 24 h earlier) were sprayed under a Potter tower and immediately transferred to the 2.5-cm-diameter petri dishes. After 2, 12, 24, and 48 h of the application, the dishes were examined to evaluate the mite survival. The four pesticides causing the highest levels A. litchii mortality, as well as azadirachtin, were tested for the effect on P. intermedius. For this test, experimental units consisted of discs of uninfested litchi leaves also sprayed under a Potter tower before introducing the predators. Survival and oviposition of the predator were evaluated every 24 h for 5 consecutive days; viability of the eggs laid was also evaluated. Highest mortality of A. litchii occurred with the application of fenpyroximate, sulfur, abamectin, and hexythiazox. Azadirachtin was considered moderately harmful to the predator P. intermedius, whereas other pesticides were classified as harmful. Despite the low efficiency of azadirachtin in the control of the pest, its relative selectivity to P. intermedius would encourage the evaluation on field condition, especially for use in organic production systems.

Robust Switched Control Design for Nonlinear Systems Using Fuzzy Models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Artificial Immune Systems Applied to the Analysis of Structural Integrity of a Building

This paper presents the application of artificial immune systems for analysis of the structural integrity of a building. Inspired by a biological process, it uses the negative selection algorithm to perform the identification and characterization of structural failure. This paper presents the application of artificial immune systems for analysis of the structural integrity of a building. Inspired by a biological process, it uses the negative selection algorithm to perform the identification and characterization of structural failure. This methodology can assist professionals in the inspection of mechanical and civil structures, to identify and characterize flaws, in order to perform preventative maintenance to ensure the integrity of the structure and decision-making. In order to evaluate the methodology was made modeling a two-story building and several situations were simulated (base-line condition and improper conditions), yielding a database of signs, which were used as input data for the negative selection algorithm. The results obtained by the present method efficiency, robustness and accuracy.

On Switched Regulator Design of Uncertain Nonlinear Systems Using Takagi-Sugeno Fuzzy Models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Switch allocation problems in power distribution systems

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Increasing the lateral line length of drip irrigation systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A METHODOLOGY TO EVALUATE OBSOLETE INVENTORY IN HEALTH CARE

Many organizations are currently facing inventory management problems such as distributing inventory on-time and maintain the correct inventory levels to satisfy the customer or end users. Organizations understand the need for maintaining the accurate inventory levels but sometimes fall short leading a wide performance gap in maintaining inventory accurately. The inventory inaccuracy can consume much of the investment on purchasing inventory and many times leads to excessive inventory. The research objective of thesis is to provide a decision making criteria to the management for closing or maintaining the warehouse based on basic purchasing and holding cost information. The specific objectives provide information regarding the impact of inventory carrying cost, obsolete inventory, inventory turns. The methodology section explains about the carrying cost ratio that would help inventory managers to adopt best practices to avoid obsolete inventory and also reduce excessive inventory levels. The research model was helpful in providing a decision making criteria based on the performance metric developed. This research model and performance metric had been validated by analysis of warehouse data and results indicated a shift from two-echelon inventory supply chain to a one-echelon or Just In Time (JIT) based inventory supply chain. The recommendations from the case study were used by a health care organization to reorganize the supply chain resulting in the reduction of excessive inventory.

Parental Ethnotheories of Child Development: Looking Beyond Independence and Individualism in American Belief Systems

Over the past several decades, the topic of child development in a cultural context has received a great deal of theoretical and empirical investigation. Investigators from the fields of indigenous and cultural psychology have argued that childhood is socially and historically constructed, rather than a universal process with a standard sequence of developmental stages or descriptions. As a result, many psychologists have become doubtful that any stage theory of cognitive or socialemotional development can be found to be valid for all times and places. In placing more theoretical emphasis on contextual processes, they define culture as a complex system of common symbolic action patterns (or scripts) built up through everyday human social interaction by means of which individuals create common meanings and in terms of which they organize experience. Researchers understand culture to be organized and coherent, but not homogenous or static, and realize that the complex dynamic system of culture constantly undergoes transformation as participants (adults and children) negotiate and re-negotiate meanings through social interaction. These negotiations and transactions give rise to unceasing heterogeneity and variability in how different individuals and groups of individuals interpret values and meanings. However, while many psychologists—both inside and outside the fields of indigenous and cultural psychology–are now willing to give up the idea of a universal path of child development and a universal story of parenting, they have not necessarily foreclosed on the possibility of discovering and describing some universal processes that underlie socialization and development-in-context. The roots of such universalities would lie in the biological aspects of child development, in the evolutionary processes of adaptation, and in the unique symbolic and problem-solving capacities of the human organism as a culture-bearing species. For instance, according to functionalist psychological anthropologists, shared (cultural) processes surround the developing child and promote in the long view the survival of families and groups if they are to demonstrate continuity in the face of ecological change and resource competition, (e.g. Edwards & Whiting, 2004; Gallimore, Goldenberg, & Weisner, 1993; LeVine, Dixon, LeVine, Richman, Leiderman, Keefer, & Brazelton, 1994; LeVine, Miller, & West, 1988; Weisner, 1996, 2002; Whiting & Edwards, 1988; Whiting & Whiting, 1980). As LeVine and colleagues (1994) state: A population tends to share an environment, symbol systems for encoding it, and organizations and codes of conduct for adapting to it (emphasis added). It is through the enactment of these population-specific codes of conduct in locally organized practices that human adaptation occurs. Human adaptation, in other words, is largely attributable to the operation of specific social organizations (e.g. families, communities, empires) following culturally prescribed scripts (normative models) in subsistence, reproduction, and other domains [communication and social regulation]. (p. 12) It follows, then, that in seeking to understand child development in a cultural context, psychologists need to support collaborative and interdisciplinary developmental science that crosses international borders. Such research can advance cross-cultural psychology, cultural psychology, and indigenous psychology, understood as three sub-disciplines composed of scientists who frequently communicate and debate with one another and mutually inform one another’s research programs. For example, to turn to parental belief systems, the particular topic of this chapter, it is clear that collaborative international studies are needed to support the goal of crosscultural psychologists for findings that go beyond simply describing cultural differences in parental beliefs. Comparative researchers need to shed light on whether parental beliefs are (or are not) systematically related to differences in child outcomes; and they need meta-analyses and reviews to explore between- and within-culture variations in parental beliefs, with a focus on issues of social change (Saraswathi, 2000). Likewise, collaborative research programs can foster the goals of indigenous psychology and cultural psychology and lay out valid descriptions of individual development in their particular cultural contexts and the processes, principles, and critical concepts needed for defining, analyzing, and predicting outcomes of child development-in-context. The project described in this chapter is based on an approach that integrates elements of comparative methodology to serve the aim of describing particular scenarios of child development in unique contexts. The research team of cultural insiders and outsiders allows for a look at American belief systems based on a dialogue of multiple perspectives.

Methodology of CO2 emission evaluation in the life cycle of office building facades

The construction industry is one of the greatest sources of pollution because of the high level of energy consumption during its life cycle. In addition to using energy while constructing a building, several systems also use power while the building is operating, especially the air-conditioning system. Energy consumption for this system is related, among other issues, to external air temperature and the required internal temperature of the building. The facades are elements which present the highest level of ambient heat transfer from the outside to the inside of tall buildings. Thus, the type of facade has an influence on energy consumption during the building life cycle and, consequently, contributes to buildings' CO2 emissions, because these emissions are directly connected to energy consumption. Therefore, the aim is to help develop a methodology for evaluating CO2 emissions generated during the life cycle of office building facades. The results, based on the parameters used in this study, show that facades using structural glazing and uncolored glass emit the most CO2 throughout their life cycle, followed by brick facades covered with compound aluminum panels or ACM (Aluminum Composite Material), facades using structural glazing and reflective glass and brick facades with plaster coating. On the other hand, the typology of facade that emits less CO2 is brickwork and mortar because its thermal barrier is better than structural glazing facade and materials used to produce this facade are better than brickwork and ACM. Finally, an uncertainty analysis was conducted to verify the accuracy of the results attained. (C) 2011 Elsevier Inc. All rights reserved.

Dynamic Features for Iris Recognition

The human eye is sensitive to visible light. Increasing illumination on the eye causes the pupil of the eye to contract, while decreasing illumination causes the pupil to dilate. Visible light causes specular reflections inside the iris ring. On the other hand, the human retina is less sensitive to near infra-red (NIR) radiation in the wavelength range from 800 nm to 1400 nm, but iris detail can still be imaged with NIR illumination. In order to measure the dynamic movement of the human pupil and iris while keeping the light-induced reflexes from affecting the quality of the digitalized image, this paper describes a device based on the consensual reflex. This biological phenomenon contracts and dilates the two pupils synchronously when illuminating one of the eyes by visible light. In this paper, we propose to capture images of the pupil of one eye using NIR illumination while illuminating the other eye using a visible-light pulse. This new approach extracts iris features called "dynamic features (DFs)." This innovative methodology proposes the extraction of information about the way the human eye reacts to light, and to use such information for biometric recognition purposes. The results demonstrate that these features are discriminating features, and, even using the Euclidean distance measure, an average accuracy of recognition of 99.1% was obtained. The proposed methodology has the potential to be "fraud-proof," because these DFs can only be extracted from living irises.