Intrinsically photosensitive retinal ganglion cell function in relation to age: a pupillometric study in humans with special reference to the age-related optic properties of the lens.

BACKGROUND: The activity of melanopsin containing intrinsically photosensitive ganglion retinal cells (ipRGC) can be assessed by a means of pupil responses to bright blue (appr.480 nm) light. Due to age related factors in the eye, particularly, structural changes of the lens, less light reaches retina. The aim of this study was to examine how age and in vivo measured lens transmission of blue light might affect pupil light responses, in particular, mediated by the ipRGC. METHODS: Consensual pupil responses were explored in 44 healthy subjects aged between 26 and 68 years. A pupil response was recorded to a continuous 20 s light stimulus of 660 nm (red) or 470 nm (blue) both at 300 cd/m2 intensity (14.9 and 14.8 log photons/cm2/s, respectively). Additional recordings were performed using four 470 nm stimulus intensities of 3, 30, 100 and 300 cd/m2. The baseline pupil size was measured in darkness and results were adjusted for the baseline pupil and gender. The main outcome parameters were maximal and sustained pupil contraction amplitudes and the postillumination response assessed as area under the curve (AUC) over two time-windows: early (0-10 s after light termination) and late (10-30 s after light termination). Lens transmission was measured with an ocular fluorometer. RESULTS: The sustained pupil contraction and the early poststimulus AUC correlated positively with age (p=0.02, p=0.0014, respectively) for the blue light stimulus condition only.The maximal pupil contraction amplitude did not correlate to age either for bright blue or red light stimulus conditions.Lens transmission decreased linearly with age (p<0.0001). The pupil response was stable or increased with decreasing transmission, though only significantly for the early poststimulus AUC to 300 cd/m2 light (p=0.02). CONCLUSIONS: Age did not reduce, but rather enhance pupil responses mediated by ipRGC. The age related decrease of blue light transmission led to similar results, however, the effect of age was greater on these pupil responses than that of the lens transmission. Thus there must be other age related factors such as lens scatter and/or adaptive processes influencing the ipRGC mediated pupil response enhancement observed with advancing age.

Examining the information content of time-lapse crosshole GPR data collected under different infiltration conditions to estimate unsaturated soil hydraulic properties

Time-lapse geophysical data acquired during transient hydrological experiments are being increasingly employed to estimate subsurface hydraulic properties at the field scale. In particular, crosshole ground-penetrating radar (GPR) data, collected while water infiltrates into the subsurface either by natural or artificial means, have been demonstrated in a number of studies to contain valuable information concerning the hydraulic properties of the unsaturated zone. Previous work in this domain has considered a variety of infiltration conditions and different amounts of time-lapse GPR data in the estimation procedure. However, the particular benefits and drawbacks of these different strategies as well as the impact of a variety of key and common assumptions remain unclear. Using a Bayesian Markov-chain-Monte-Carlo stochastic inversion methodology, we examine in this paper the information content of time-lapse zero-offset-profile (ZOP) GPR traveltime data, collected under three different infiltration conditions, for the estimation of van Genuchten-Mualem (VGM) parameters in a layered subsurface medium. Specifically, we systematically analyze synthetic and field GPR data acquired under natural loading and two rates of forced infiltration, and we consider the value of incorporating different amounts of time-lapse measurements into the estimation procedure. Our results confirm that, for all infiltration scenarios considered, the ZOP GPR traveltime data contain important information about subsurface hydraulic properties as a function of depth, with forced infiltration offering the greatest potential for VGM parameter refinement because of the higher stressing of the hydrological system. Considering greater amounts of time-lapse data in the inversion procedure is also found to help refine VGM parameter estimates. Quite importantly, however, inconsistencies observed in the field results point to the strong possibility that posterior uncertainties are being influenced by model structural errors, which in turn underlines the fundamental importance of a systematic analysis of such errors in future related studies.

Inversion of crosshole seismic data in heterogenous environments : Comparison of waveform and ray-based approaches

High-resolution tomographic imaging of the shallow subsurface is becoming increasingly important for a wide range of environmental, hydrological and engineering applications. Because of their superior resolution power, their sensitivity to pertinent petrophysical parameters, and their far reaching complementarities, both seismic and georadar crosshole imaging are of particular importance. To date, corresponding approaches have largely relied on asymptotic, ray-based approaches, which only account for a very small part of the observed wavefields, inherently suffer from a limited resolution, and in complex environments may prove to be inadequate. These problems can potentially be alleviated through waveform inversion. We have developed an acoustic waveform inversion approach for crosshole seismic data whose kernel is based on a finite-difference time-domain (FDTD) solution of the 2-D acoustic wave equations. This algorithm is tested on and applied to synthetic data from seismic velocity models of increasing complexity and realism and the results are compared to those obtained using state-of-the-art ray-based traveltime tomography. Regardless of the heterogeneity of the underlying models, the waveform inversion approach has the potential of reliably resolving both the geometry and the acoustic properties of features of the size of less than half a dominant wavelength. Our results do, however, also indicate that, within their inherent resolution limits, ray-based approaches provide an effective and efficient means to obtain satisfactory tomographic reconstructions of the seismic velocity structure in the presence of mild to moderate heterogeneity and in absence of strong scattering. Conversely, the excess effort of waveform inversion provides the greatest benefits for the most heterogeneous, and arguably most realistic, environments where multiple scattering effects tend to be prevalent and ray-based methods lose most of their effectiveness.

Acoustic properties of polypropylene composites reinforced with stone groundwood

Currently, acoustic isolation is one of the problems raised with building construction in Spain. The publication of the Basic Document for the protection against noise of the Technical Building Code has increased the demand of comfort for citizens. This has created the need to seek new composite materials that meet the new required acoustical building codes. In this paper we report the results of the newly developed composites that are able to improve the acoustic isolation of airborne noise. These composites were prepared from polypropylene (PP) reinforced with mechanical pulp fibers from softwood (Pinus radiata). Mechanical and acoustical properties of the composites from mechanical pulp (MP) and polypropylene (PP) have been investigated and compared to fiberglass (FG) composites. MP composites had lower tensile properties compared with FG composites, although these properties can be improved by incorporation of a coupling agent. The results of acoustical properties of MP composites were reported and compared with the conventional composites based on fiberglass and gypsum plasterboards. Finally, we suggest the application of MP composites as a light-weight building material to reduce acoustic transmitions

Bayesian Markov chain Monte Carlo inversion of geophysical data for the purpose of estimating the hydraulic properties of the unsaturated zone

Ground-penetrating radar (GPR) has the potential to provide valuable information on hydrological properties of the vadose zone because of their strong sensitivity to soil water content. In particular, recent evidence has suggested that the stochastic inversion of crosshole GPR data within a coupled geophysical-hydrological framework may allow for effective estimation of subsurface van-Genuchten-Mualem (VGM) parameters and their corresponding uncertainties. An important and still unresolved issue, however, is how to best integrate GPR data into a stochastic inversion in order to estimate the VGM parameters and their uncertainties, thus improving hydrological predictions. Recognizing the importance of this issue, the aim of the research presented in this thesis was to first introduce a fully Bayesian inversion called Markov-chain-Monte-carlo (MCMC) strategy to perform the stochastic inversion of steady-state GPR data to estimate the VGM parameters and their uncertainties. Within this study, the choice of the prior parameter probability distributions from which potential model configurations are drawn and tested against observed data was also investigated. Analysis of both synthetic and field data collected at the Eggborough (UK) site indicates that the geophysical data alone contain valuable information regarding the VGM parameters. However, significantly better results are obtained when these data are combined with a realistic, informative prior. A subsequent study explore in detail the dynamic infiltration case, specifically to what extent time-lapse ZOP GPR data, collected during a forced infiltration experiment at the Arrenaes field site (Denmark), can help to quantify VGM parameters and their uncertainties using the MCMC inversion strategy. The findings indicate that the stochastic inversion of time-lapse GPR data does indeed allow for a substantial refinement in the inferred posterior VGM parameter distributions. In turn, this significantly improves knowledge of the hydraulic properties, which are required to predict hydraulic behaviour. Finally, another aspect that needed to be addressed involved the comparison of time-lapse GPR data collected under different infiltration conditions (i.e., natural loading and forced infiltration conditions) to estimate the VGM parameters using the MCMC inversion strategy. The results show that for the synthetic example, considering data collected during a forced infiltration test helps to better refine soil hydraulic properties compared to data collected under natural infiltration conditions. When investigating data collected at the Arrenaes field site, further complications arised due to model error and showed the importance of also including a rigorous analysis of the propagation of model error with time and depth when considering time-lapse data. Although the efforts in this thesis were focused on GPR data, the corresponding findings are likely to have general applicability to other types of geophysical data and field environments. Moreover, the obtained results allow to have confidence for future developments in integration of geophysical data with stochastic inversions to improve the characterization of the unsaturated zone but also reveal important issues linked with stochastic inversions, namely model errors, that should definitely be addressed in future research.

Tensile strength characteristics of polypropylene composites reinforced with stone groundwood fibers from softwood

The behavior of stone groundwood / polypropylene injection-molded composites was evaluated with and without coupling agent. Stone groundwood (SGW) is a fibrous material commonly prepared in a high yield process and mainly used for papermaking applications. In this work, the use of SGW fibers was explored as a reinforcing element of polypropylene (PP) composites. The surface charge density of the composite components was evaluated, as well as the fiber’s length and diameter inside the composite material. Two mixing extrusion processes were evaluated, and the use of a kinetic mixer, instead of an internal mixer, resulted in longer mean fiber lengths of the reinforcing fibers. On the other hand, the accessibility of surface hydroxyl groups of stone groundwood fibers was improved by treating the fibers with 5% of sodium hydroxide, resulting in a noticeable increase of the tensile strength of the composites, for a similar percentage of coupling agent. A new parameter called Fiber Tensile Strength Factor is defined and used as a baseline for the comparison of the properties of the different composite materials. Finally the competitiveness of stone groundwood / polypropylene / polypropylene-co-maleic anhydride system, which compared favorably to sized glass-fiber / polypropylene GF/PP and glass-fiber / polypropylene / polypropylene-co-maleic anhydride composite formulations, was quantified by means of the fiber tensile strength factor

Biopolymers

Plants naturally synthesize a variety of polymers that have been used by mankind as a source of useful biomaterials. For example, cellulose, the main constituent of plant cell wall and the most abundant polymer on earth, has been used for several thousand years as a source of fibers for various fabrics. Similarly, rubber extracted from the bark of the tree Hevea brasiliensis, has been a major source of elastomers until the development of similar synthetic polymers. In the last century, the usefulness of plant polymers as biomaterials has been expanded through the chemical modification of the natural polymers. For example, a number of plastics have been made by substituting the hydroxyl groups present on the glucose moiety of cellulose with larger groups, such as nitrate or acetate, giving rise to materials such as cellulose acetate, a clear plastic used in consumer products such as toothbrush handles and combs. Similarly, starch has been used in the manufacture of plastics by either using it in blends with synthetic polymers or as the main constituent in biodegradable plastics. The advent of transformation and expres- sion of foreign genes in plants has created the possibility of expanding the usefulness of plants to include the synthesis of a range of biomolecules. In view of the capacity of certain crops to produce a large quantity of organic raw material at low cost, such as oils and starch, it is of interest to explore the possibility of using transgenic plants as efficient vectors for the synthesis of biopolymers. Such plant based biopolymers could replace, in part, the synthetic plastics and elastomers produced from petroleum, offering the advantage of renewability and sustainability. Furthermore, being natural pro- ducts, biopolymers are usually biodegradable and can thus contribute to alleviate problems associated with the management of plastic waste. In this article, the emphasis will be on the use of transgenic plants for the synthesis of two novel classes of industrially useful polymers, namely protein based polymers made from natural or artificial genes, and polyhydroxyalkanoates, a family of bacterial poly- esters having the properties of biodegradable plastics and elastomers.

" Leishmania major " metacaspase in programmed cell death

Abstract: The human protozoan parasite Leishmania major has been shown to exhibit several morphological and biochemical features characteristic of a programmed cell death (PCD) when differentiating into infectious stages and under a variety of stress conditions. In mammalian cells, the principal effector molecules of PCD or apoptosis are caspases. Although some caspase-like peptidase activity has been reported in dying parasites, no caspase gene is present in the L. major genome. However, a single metacaspase gene is present in L. major whose encoded protein harbors the predicted secondary structure and the catalytic dyad histidine/cysteine described for caspases and other metacaspases identified in plants and yeast. Metacaspases are also present in other protozoan parasites such as Trypanosoma and Plasmodium species and are not present in mammalian cells, which make them a possible drug target for the treatment of the parasitic diseases they cause. The Saccharomyces cerevisiae metacaspase YCA1 has been implicated in the death of aging cells, cells defective in some biological functions, and cells exposed to different environmental stresses. In this study, we evaluated the functional heterologous complementation of a S. cerevisiae ycal null mutant with the L. major metacaspase (LmjMCA} in cell death induced by oxidative stress. We show that LmjMCA is involved in yeast cell death, similar to YCA1, and that this function depends on its catalytic activity. LmjMCA was found to be auto-processed as occurs for caspases, however, LmjMCA did not exhibit any activity with caspase substrates. In contrast, LmjMCA was active towards substrates with arginine in the P1 position, with the activity being abolished following H147A and C202A catalytic site mutations and addition of the arginal inhibitor leupeptin. In order to identify the L. major proteins that may function as substrates, inhibitors, or may bind and recruit LmjMCA, a yeast two-hybrid screening with cDNA libraries from different life cycle stages of the parasite was conducted. Proteins putatively involved in PCD were identified as interacting with LmjMCA, however, the interaction of LmjMCA with proteins involved in other physiological processes such as vesicle transport, suggests that LmjMCA could have additional roles in the different life cycle stages of the parasite. Résumé: Plusieurs caractéristiques morphologiques et biochimiques rappelant la mort cellulaire programmée ont été identifiées dans les stades infectieux et sous des conditions de stress, chez le parasite protozoaire humain, Leishmania major. Dans les cellules de mammifères, les caspases sont les molécules effectrices principales impliquées dans la mort cellulaire programmée et l'apoptose. Bien qu'une activité caspase ait été retrouvée dans des parasites en mon` cellulaire, le génome de Leishmania ne contient aucun gène qui pourrait coder pour une caspase. À la place, on retrouve un gène unique codant pour une métacaspase. Une prédiction de la structure secondaire de la métacaspase montre que cette métacaspase a un domaine catalytique contenant la dyade histidine/cystéine présente dans les caspases et les autres métacaspases décrites chez les plantes et la levure. Les métacaspases sont aussi présentes dans d'autres parasites protozoaires tels que Trypanosome et Plasmodium, mais ne sont pas présentes dans les cellules de mammifères, ce qui en fait des cibles intéressantes pour le développement de drogue. Dans la levure, Saccharomyces cerevisiae, la métacaspase YCA1 est impliquée dans la mort des cellules âgées, la mort des cellules défectueuses dans certaines fonctions biologiques et dans les cellules exposées à différents stress environnementaux. Dans cette étude, une complémentation hétérologue fonctionnelle d'un mutant de la levure déficient en YCA1 par le gène LmjMCA de L. major lors de l'induction de ta mort par stress oxydatif a été évaluée. Nos résultats montrent que LmjMCA peut remplacer YGA1 dans le programme de mort cellulaire chez la levure et que celte fonction dépend de son activité catalytique. De plus, LmjMCA subit une auto clivage comme les caspases mais n'exhibe aucune spécificité pour les substrats des caspases. Au contraire, LmjMCA est active envers des substrats ayant une arginine en position P1, son activité étant détruite suite à des changements de son domaine catalytique par les mutations H147A et C202A ou suite à une inhibition para la leupeptine. Afin d'identifier quels pourraient être les substrats, les inhibiteurs ou les molécules interagissant avec LmjMCA, nous avons entrepris un criblage double-hybride en utilisant des librairies de d'ADNc provenant de différents stades du cycle parasitaire. Plusieurs protéines potentiellement impliquées dans un programme de mort cellulaire ont été identifiées comme interagissant avec LmjMCA. Cependant, l'identification de protéines impliquées dans le transport vésiculaire suggère aussi que LmjMCA pourrait avoir un rôle additionnel dans les différents stades du cycle parasitaire. Résumé destiné à un large public: De nos jours, la leishmaniose est la deuxième plus importante maladie parasitaire après la malaria. Malgré les avancées accomplies dans les stratégies de contrôle, près de deux millions de nouveaux cas apparaissent chaque année. Actuellement, la principale stratégie pour faire face à ce problème épidémiologique consiste en un traitement pharmacologique des personnes infectées. Pourtant, seule une dizaine de médicaments, dont la plupart sont toxiques, est disponible pour traiter la leishmaniose et des cas de résistance émergent dans certains pays endémiques. Il devient donc urgent de mettre au point de nouveaux traitements anti-leishmaniens capables d'éliminer le parasite sans effets indésirables sur le patient. Récemment, des caractéristiques morphologiques et biochimiques de la mort cellulaire programmée (MCP) semblables au processus de l'apoptose chez les mammifères ont été décrites dans Leishmania. Cependant, des gènes codant pour des protéines similaires à celles qui sont impliquées dans l'apoptose, comme les caspases, ne se retrouvent pas dans le génome de Leishmanía major. Néanmoins, les espèces de Leishmanía, aussi bien que d'autres parasites protozoaires responsables des trypanosomiases et de la malaria, possèdent des métacaspases qui sont des protéines homologues aux caspases mais qui ne sont pas présentes chez les mammifères. C'est pourquoi, la caractérisation de la métacaspase de Leishmania (LmjMCA) ainsi que ses mécanismes d'activation pourrait être une piste d'investigation intéressante dans l'identification de nouvelles cibles thérapeutiques dans les voies de signalisation de la MCP des parasites protozoaires. Dans la levure, Saccharomyces cerevisiae, la métacaspase YCA1 est impliquée dans la mort des cellules âgées, la mort des cellules défectueuses dans certaines fonctions biologiques et dans les cellules exposées à différents stress environnementaux. Dans cette étude, une complémentation hétérologue fonctionnelle d'un mutant de la levure déficient en YCA1 par le gène LmjMCA de L major lors de l'induction de la mort par stress oxydatif a été évaluée. Nos résultats montrent que LmjMCA peut remplacer YCA1 dans le programme de mort cellulaire chez la levure et que cette fonction dépend de son activité catalytique. De plus, LmjMCA subit une auto clivage comme les caspases mais n'exhibe aucune spécificité pour les substrats des caspases. Au contraire, LmjMCA est active envers des substrats ayant une arginine en position P1, son activité étant détruite suite à des changements de son domaine catalytique par les mutations H147A et C202A ou suite à une inhibition para la leupeptine. Afin d'identifier quels pourraient être les substrats, les inhibiteurs ou les molécules interagissant avec LmjMCA, nous avons entrepris un criblage double-hybride en utilisant des librairies de d'ADNe provenant de différents stades du cycle parasitaire. Plusieurs protéines potentiellement impliquées dans un programme de mort cellulaire ont été identifiées comme interagissant avec LmjMCA. Cependant, l'identification de protéines impliquées dans le transport vésiculaire suggère aussi que LmjMCA pourrait avoir un rôle additionnel dans les différents stades du cycle parasitaire. Resumen destinado al público en general: La leishmaniasis es la segunda enfermedad parasitaria más importante en el mundo actual. Aproximadamente 2 millones de nuevos casos ocurren cada año a pesar de los avances logrados en el desarrollo de nuevos métodos de control. El tratamiento farmacológico de las personas infectadas es actualmente la principal estrategia de control, sin embargo, menos de una decena de medicamentos se encuentran disponibles en el mercado, la mayoría de ellos son tóxicos, y ya empiezan a encontrarse parásitos resistentes en algunos países endémicos para la leishmaniasis. El desarrollo de nuevos medicamentos capaces de eliminar los parásitos sin producir efectos indeseables en los humanos, es una necesidad inminente. Recientemente, algunas de las características morfológicas y bioquímicas de la muerte celular programada (MCP) similares al proceso de la apoptosis en mamíferos, han sido descritas en parasitos de Leishmania. Sin embargo, genes que codifiquen proteínas similares a aquellas involucradas en la apoptosis, como las caspasas, no se encuentran en el genoma de Leishmania major. AI contrario, las especies de Leishmania, así como de los otros parásitos responsables de la tripanosomiasis y de la malaria, poseen metacaspases, proteínas homologas a las caspases pero que no están presentes en las células de mamíferos. La caracterización de la metacaspasa de L. major y de sus mecanismos de activación constituye, por lo tanto, un área de investigación interesante para la identificación de nuevos blancos terapéuticos en el proceso de MCP de los parásitos protozoarios. En la levadura Saccharomyces cerevisiae, la metacaspasa YCA1 ha sido descrita como implicada en la muerte de células envejecidas, células defectuosas en algunas funciones biológicas, y en células expuestas a diferentes tipos de estrés ambiental. En el presente estudio se evaluó la complementación heteróloga funcional de una levadura mutante deficiente en YCA1 con el gen de metacaspase de L. major (LmjMCA) en la MCP inducida por estrés oxidativo. Nuestros resultados muestran que la LmjMCA puede reemplazarla YCA1 en la MCP de la levadura dependiente de su actividad catalítica y que la LmjMCA se auto-procesa similar a las caspasas. Sin embargo, LmjMCA no reconoce los substratos de caspasas sino substratos con una arginina en ta posición P1. Dicha actividad enzimática fue abolida con la inducción de las mutaciones puntuales H147A y C202A en la díada catalítica de LmjMCA y con la adición de leupeptina, un inhibidor con arginina. Con el fin de identificar proteínas que pudieran funcionar como substratos, inhibidores o moléculas modificadoras de LmjMCA, se aplicó el método de doble-híbrido en levadura con bibliotecas de ADNc provenientes de diferentes estadios del ciclo de vida del parásito. Algunas proteínas potencialmente implicadas. en la MCP del parásito fueron identiñcadas interactuando con LmjMCA. La identificación de otras proteínas involucradas en transporte vesicular sugiere que la LmjMCA podría tener una función biológica adicional en los diferentes estadios del ciclo de vida dei parásito.

A TARBP2-dependent miRNA expression profile underlies cancer stem cell properties and provides candidate therapeutic reagents in Ewing sarcoma.

We have recently demonstrated that human pediatric mesenchymal stem cells can be reprogrammed toward a Ewing sarcoma family tumor (ESFT) cancer stem cell (CSC) phenotype by mechanisms that implicate microRNAs (miRNAs). Here, we show that the miRNA profile of ESFT CSCs is shared by embryonic stem cells and CSCs from divergent tumor types. We also provide evidence that the miRNA profile of ESFT CSCs is the result of reversible disruption of TARBP2-dependent miRNA maturation. Restoration of TARBP2 activity and systemic delivery of synthetic forms of either of two of its targets, miRNA-143 or miRNA-145, inhibited ESFT CSC clonogenicity and tumor growth in vivo. Our observations suggest that CSC self-renewal and tumor maintenance may depend on deregulation of TARBP2-dependent miRNA expression.

Estimation of inelastic seismic material properties of a surgical sea-bed from multi-component marine seismic data

To date, state-of-the-art seismic material parameter estimates from multi-component sea-bed seismic data are based on the assumption that the sea-bed consists of a fully elastic half-space. In reality, however, the shallow sea-bed generally consists of soft, unconsolidated sediments that are characterized by strong to very strong seismic attenuation. To explore the potential implications, we apply a state-of-the-art elastic decomposition algorithm to synthetic data for a range of canonical sea-bed models consisting of a viscoelastic half-space of varying attenuation. We find that in the presence of strong seismic attenuation, as quantified by Q-values of 10 or less, significant errors arise in the conventional elastic estimation of seismic properties. Tests on synthetic data indicate that these errors can be largely avoided by accounting for the inherent attenuation of the seafloor when estimating the seismic parameters. This can be achieved by replacing the real-valued expressions for the elastic moduli in the governing equations in the parameter estimation by their complex-valued viscoelastic equivalents. The practical application of our parameter procedure yields realistic estimates of the elastic seismic material properties of the shallow sea-bed, while the corresponding Q-estimates seem to be biased towards too low values, particularly for S-waves. Given that the estimation of inelastic material parameters is notoriously difficult, particularly in the immediate vicinity of the sea-bed, this is expected to be of interest and importance for civil and ocean engineering purposes.

Evaluating Properties of Blended Cements for Concrete Pavements, December 2003

The addition of supplementary cementitious materials (SCMs), such as fly ash (FA) and slag, generally improves concrete workability, durability, and long-term strength. New trends in sustainable development of concrete infrastructure and in environmental regulations on waste disposal are spurring use of SCMs in concrete. However, use of SCM concrete is sometimes limited due to a lack of understanding about material behaviors and lack of proper specifications for its construction practice. It is believed that SCM concrete performance varies significantly with the source and proportion of the cementitious materials. SCM concrete often displays slower hydration, accompanied by slower setting and lower early-age strength, especially under cold weather conditions. The present research was conducted to have a better understanding of SCM concrete behaviors under different weather conditions. In addition to the study of the effect of SCM content on concrete set time using cementitious materials from different sources/manufacturers, further research may be needed to investigate the effects of SCM combinations on concrete flowability, air stability, cracking resistance, and durability.

Source wavelet estimation for waveform inversion of crosshole georadar data

AbstractFor a wide range of environmental, hydrological, and engineering applications there is a fast growing need for high-resolution imaging. In this context, waveform tomographic imaging of crosshole georadar data is a powerful method able to provide images of pertinent electrical properties in near-surface environments with unprecedented spatial resolution. In contrast, conventional ray-based tomographic methods, which consider only a very limited part of the recorded signal (first-arrival traveltimes and maximum first-cycle amplitudes), suffer from inherent limitations in resolution and may prove to be inadequate in complex environments. For a typical crosshole georadar survey the potential improvement in resolution when using waveform-based approaches instead of ray-based approaches is in the range of one order-of- magnitude. Moreover, the spatial resolution of waveform-based inversions is comparable to that of common logging methods. While in exploration seismology waveform tomographic imaging has become well established over the past two decades, it is comparably still underdeveloped in the georadar domain despite corresponding needs. Recently, different groups have presented finite-difference time-domain waveform inversion schemes for crosshole georadar data, which are adaptations and extensions of Tarantola's seminal nonlinear generalized least-squares approach developed for the seismic case. First applications of these new crosshole georadar waveform inversion schemes on synthetic and field data have shown promising results. However, there is little known about the limits and performance of such schemes in complex environments. To this end, the general motivation of my thesis is the evaluation of the robustness and limitations of waveform inversion algorithms for crosshole georadar data in order to apply such schemes to a wide range of real world problems.One crucial issue to making applicable and effective any waveform scheme to real-world crosshole georadar problems is the accurate estimation of the source wavelet, which is unknown in reality. Waveform inversion schemes for crosshole georadar data require forward simulations of the wavefield in order to iteratively solve the inverse problem. Therefore, accurate knowledge of the source wavelet is critically important for successful application of such schemes. Relatively small differences in the estimated source wavelet shape can lead to large differences in the resulting tomograms. In the first part of my thesis, I explore the viability and robustness of a relatively simple iterative deconvolution technique that incorporates the estimation of the source wavelet into the waveform inversion procedure rather than adding additional model parameters into the inversion problem. Extensive tests indicate that this source wavelet estimation technique is simple yet effective, and is able to provide remarkably accurate and robust estimates of the source wavelet in the presence of strong heterogeneity in both the dielectric permittivity and electrical conductivity as well as significant ambient noise in the recorded data. Furthermore, our tests also indicate that the approach is insensitive to the phase characteristics of the starting wavelet, which is not the case when directly incorporating the wavelet estimation into the inverse problem.Another critical issue with crosshole georadar waveform inversion schemes which clearly needs to be investigated is the consequence of the common assumption of frequency- independent electromagnetic constitutive parameters. This is crucial since in reality, these parameters are known to be frequency-dependent and complex and thus recorded georadar data may show significant dispersive behaviour. In particular, in the presence of water, there is a wide body of evidence showing that the dielectric permittivity can be significantly frequency dependent over the GPR frequency range, due to a variety of relaxation processes. The second part of my thesis is therefore dedicated to the evaluation of the reconstruction limits of a non-dispersive crosshole georadar waveform inversion scheme in the presence of varying degrees of dielectric dispersion. I show that the inversion algorithm, combined with the iterative deconvolution-based source wavelet estimation procedure that is partially able to account for the frequency-dependent effects through an "effective" wavelet, performs remarkably well in weakly to moderately dispersive environments and has the ability to provide adequate tomographic reconstructions.

Direct Cost of Reprocessing Cotton-woven Surgical Drapes: a Case Study

OBJECTIVE Identify the direct cost of reprocessing double and single cotton-woven drapes of the surgical LAP package. METHOD A quantitative, exploratory and descriptive case study, performed at a teaching hospital. The direct cost of reprocessing cotton-woven surgical drapes was calculated by multiplying the time spent by professionals involved in reprocessing the unit with the direct cost of labor, adding to the cost of materials. The Brazilian currency (R$) originally used for the calculations was converted to US currency at the rate of US$0.42/R$. RESULTS The average total cost for surgical LAP package was US$9.72, with the predominance being in the cost of materials (US$8.70 or 89.65%). It is noteworthy that the average total cost of materials was mostly impacted by the cost of the cotton-woven drapes (US$7.99 or 91.90%). CONCLUSION The knowledge gained will subsidize discussions about replacing reusable cotton-woven surgical drapes for disposable ones, favoring arguments regarding the advantages and disadvantages of this possibility considering human resources, materials, as well as structural, environmental and financial resources.

Sleep, metabolism and aging

Aging is a multidimensional process of physical, psychological, and social changes. Understanding how we sleep and how this dynamic process evolves across life span will help to identify normal developmental aspects of sleep over time and to create strategies to increase awareness of sleep disturbances and their early management. In normal sleepers from HypnoLaus cohort, we evaluated the effects of age and gender on both subjective and objective sleep measurements. Our results indicate that normal aging is not accompanied by sleep complaints, and when they exist suggest the presence of underlying comorbidities. Polysomnographic data revealed that slow wave sleep was more affected with age in men, and age affected differently NREM and REM spectral power densities. Both sleep structure and spectral analysis profiles may constitute standards to delineate pathological changes in sleep, both for aging women and men. Another important aspect in the management of sleep and its disorders is a detailed characterization of sleep-inducing medications. Gamma-hydroxybutyrate (GHB) is an inhibitory neurotransmitter derivative of GABA, but its mode of action and the range of effects are not well understood. Several properties, as growth hormone stimulation in humans and the development of weight loss in treated patients suggest an unexplored metabolic effect. In different experiments we assessed the effects of acute, short term and chronic GHB administration on central (cerebral cortex) and peripheral (liver) biochemical processes involved in the metabolism of the drug, as well as the effects of the drug on metabolism in C57BL/6J, GABAB knock-out and obese (ob/ob) mice. We showed that GHB treatment affects weight gain in C57BL/6J and GABAB knock-out mice. Metabolomic analysis indicated large central and peripheral metabolic changes induced by GHB with important relevance to its therapeutic use. -- Le vieillissement est un processus multidimensionnel accompagné par de multiples changements dans les domaines physique, psychologique et social. Comprendre comment nous dormons et comment ce processus dynamique évolue sur la durée de vie nous aidera à identifier les aspects normaux du développement du sommeil au fil du temps, et à créer des stratégies pour accroître la connaissance et compréhension des troubles du sommeil et leur prise en charge précoce. Chez les sujets normaux de la cohorte HypnoLaus nous avons évalué les effets de l'âge et du sexe sur les mesures subjectives et objectives du sommeil. Nos résultats indiquent que le vieillissement normal ne s'accompagne pas de troubles du sommeil, et quand ils existent ceux-ci suggèrent la présence de comorbidités sous-jacentes. Les données polysomnographiques ont révélé que le sommeil profond était plus affecté avec l'âge chez les hommes. De plus, nous avons montré comment l'âge modifie la composition spectrale du sommeil lent et paradoxal. La structure du sommeil et les profils d'analyse spectrale peuvent donc constituer des standards permettant de définir les changements pathologiques du sommeil chez les personnes âgées. Parmi les aspects importants de la gestion du sommeil et de ses troubles, la caractérisation détaillée des médicaments hypnotiques utilisés est essentielle. L'acide gamma-hydroxybutyrique (GHB) est un acide gras à courte chaîne dérivé du GABA, principal neurotransmetteur inhibiteur du cerveau, mais son mode d'action et tous ses effets sont toujours largement méconnus. Plusieurs propriétés, comme la stimulation de la sécrétion de l'hormone de croissance chez l'homme et le développement d'une perte de poids chez les patients traités suggèrent un effet métabolique inexploré. Dans différentes expériences, nous avons évalué les effets d'une exposition aiguë, à court terme et chronique de GHB sur les processus biochimiques centraux (cortex cérébral) et périphériques (foie) impliqués dans le métabolisme du médicament. Nous avons aussi évalué les effets du médicament sur le métabolisme des souris C57BL/6J, GABAB KO et obèses (ob/ob). Nos résultats ont montré que le GHB diminue le gain de poids chez les souris C57BL/6J et GABAB KO. L'analyse métabolomique a indiqué des changements importants induits par GHB au niveau central et périphérique, et ces effets sont importants pour son utilisation thérapeutique.

Structural covariance of superficial white matter in mild Alzheimer's disease compared to normal aging.

INTRODUCTION: Interindividual variations in regional structural properties covary across the brain, thus forming networks that change as a result of aging and accompanying neurological conditions. The alterations of superficial white matter (SWM) in Alzheimer's disease (AD) are of special interest, since they follow the AD-specific pattern characterized by the strongest neurodegeneration of the medial temporal lobe and association cortices. METHODS: Here, we present an SWM network analysis in comparison with SWM topography based on the myelin content quantified with magnetization transfer ratio (MTR) for 39 areas in each hemisphere in 15 AD patients and 15 controls. The networks are represented by graphs, in which nodes correspond to the areas, and edges denote statistical associations between them. RESULTS: In both groups, the networks were characterized by asymmetrically distributed edges (predominantly in the left hemisphere). The AD-related differences were also leftward. The edges lost due to AD tended to connect nodes in the temporal lobe to other lobes or nodes within or between the latter lobes. The newly gained edges were mostly confined to the temporal and paralimbic regions, which manifest demyelination of SWM already in mild AD. CONCLUSION: This pattern suggests that the AD pathological process coordinates SWM demyelination in the temporal and paralimbic regions, but not elsewhere. A comparison of the MTR maps with MTR-based networks shows that although, in general, the changes in network architecture in AD recapitulate the topography of (de)myelination, some aspects of structural covariance (including the interhemispheric asymmetry of networks) have no immediate reflection in the myelination pattern.