Which accelerated nursing students withdraw and fail in their first year of a Bachelor of Nursing (BN)?

Accelerated students in nursing have their first experience of university entering into second year subjects such as pharmacology. These accelerated students may have a Diploma of Nursing or equivalent experience or may be domestic or international graduates in any subject area. We have previously shown that the withdrawal rates are higher for accelerated than traditional students. We now show that of the accelerated students, it is only the diploma students that have difficulty transitioning to a BN.

Reduced attrition of accelerated nursing students from pharmacology – is it associated with graduation?

In order to reduce the attrition of accelerated nursing students in bioscience/pharmacology, we introduced an innovation to help these students. Although this innovation was associated with reduced attritions from the units in their first year at university, we now show that there was a reduced graduation rate of the accelerated students who survived pharmacology, compared to the traditional students.

Cynodon dactylon, Green Couch Grass, Bermuda Grass 'Grand Prix'

‘Grand Prix’ is a selection from a cross between ‘Wintergreen’ and ‘Couch 5’ (also designated C5). ‘Couch 5’ was a selection from an earlier series of crosses by the breeder between ‘Wintergreen’ and a number of Cynodon dactylon accessions, which were collected by the breeder from the Mornington Peninsula area of Victoria between 1986 and 1990. C5 was an experimental breeding line, and was not subsequently reserved as vegetative germplasm. Living material of C5 is no longer in existence. Following the crossing of ‘Couch 5’ and ‘Wintergreen’ in 1998, the resultant seed was germinated on moist blotting paper. Individual seedlings, a total of 150 in number, were planted into 150mm pots and these plants observed during 1998 and 1999. During the summer of 1999-2000, the majority of the seedling plants were culled on the basis of their shoot density, leaf texture, internode length, and colour. In the spring of 2000, the remaining 20 potted seedlings were planted individually into 4m2 plots at the Evergreen Turf farm at Pakenham (Victoria), and allowed to expand fully across these plots. The final selection of Seedling 12 (later designated DN12) in late 2002 was based on shoot density, leaf colour, turf quality, and reduced thatch accumulation as expressed in these plots. Propagation: the original plant has been multiplied through four (4) vegetative expansions prior to PBR application without showing any discernible off types. Breeder: David Nickson, Frankston, VIC. PBR Certificate Number 3133, Application Number 2005/291, granted 12 September 2006.

Cynodon dactylon, Green Couch Grass, Bermuda Grass 'Winter Gem'

‘Winter Gem’ is a selection from a cross between ‘Wintergreen’ and Couch 5 (also designated C5). Couch 5 was a selection from an earlier series of crosses by the breeder between ‘Wintergreen’ and a number of Cynodon dactylon accessions, which were collected by the breeder from the Mornington Peninsula area of Victoria between 1986 and 1990. C5 was an experimental breeding line, and was not subsequently reserved as vegetative germplasm. Living material of C5 is no longer in existence. Following the crossing of Couch 5 and ‘Wintergreen’ in 1998, the resultant seed was germinated on moist blotting paper. Individual seedlings, a total of 150 in number, were planted into 150mm pots and these plants observed during 1998 and 1999. During the summer of 1999-2000, the majority of the seedling plants were culled on the basis of their shoot density, leaf texture, internode length, and colour. In the spring of 2000, the remaining 20 potted seedlings were planted individually into 4m2 plots at the Evergreen Turf farm at Pakenham (Victoria), and allowed to expand fully across these plots. The final selection of Seedling 9 (later designated DN9) in late 2002 was based on shoot density, leaf texture, and retention of winter colour as expressed in these plots. Propagation: The original plant had been multiplied through four (4) vegetative expansions prior to PBR application without showing any discernible off types. Breeder: David Nickson, Frankston, VIC. PBR Certificate Number 3132, Application Number 2005/290, granted 11 September 2006.

Zoysia matrella, Manila Grass 'A-1'

‘A-1’ was selected from a breeding population of 40 seedling Zoysia matrella plants from various parts of Southeast Asia (Japan, Philippines, China, Korea, Vietnam and Thailand). The original plants were vegetatively propagated and evaluated first in pots. A shortlist of selected genotypes was expanded to field plantings at Sheldon, QLD and evaluated against existing Z. matrella and Z. matrella x Z. japonica hybrid cultivars under mowing heights from 10 to 25mm and under shade levels ranging from 0 to 80%. ‘A-1’ showed higher tiller density and a more prostrate growth habit than the parent ecotype, and was selected from the subsequent breeding population on the basis of its superior turf colour and quality under mowing for 6 years and its shade tolerance as shown by its ability to maintain density of the mown sward under greatly reduced light levels (70-80% shade). Additional observations regarding climatic adaptation were made in Cairns, QLD, and Melbourne, VIC, respectively. Breeder: Donald S Loch, Alexandra Hills, QLD. PBR Certificate Number 3649, Application Number 2008/091, granted 16 December 2008.

Aboriginal and Torres Strait Islander Health

The chapter introduces Aboriginal and Torres Strait Islander health and discusses the important role that Indigenous and non-Indigenous peoples can play in ‘closing the gap’ in health disparities as experienced by Aboriginal and Torres Strait Islander peoples.

Collaborative learning approach to introduce computational fluid dynamics

This paper presents the design, implementation and evaluation of a collaborative learning activity designed to replace traditional face-to-face lectures in a large classroom. This activity aims to better engage the students with their learning and improve the students’ experience and outcomes. This project is implemented in the Fluid Mechanics unit of the Mechanical Engineering degree at the Queensland University of Technology to introduce students with the concept, terminology and process of Computational Fluid Dynamics (CFD). The approach integrates a constructive collaborative assignment which is a key element in the overall quality of teaching and learning, and an integral component of the students’ experience. A detailed survey, given to the students, showed an overall high level of satisfaction. However, the results also highlighted the gap between students’ expectations both for contents and assignment and teacher expectations. Discussions to address this issue are presented in the paper based on a critical reflection.

Indicators of wellbeing in recreational video game players

Video game play is a popular entertainment choice, yet we have a limited understanding of the potential wellbeing benefits associated with recreational play. An online survey (final sample, n = 297) addresses this by investigating how the player experience related to wellbeing. The impact of amount of play, game genre, mode of play (social or solitary play) and the psychological experience of play (flow and need satisfaction) on a multi-dimensional measure of wellbeing (emotional, psychological and social) was examined via hierarchical regression. Age, gender, the play of casual games compared to shooters, and in-game experiences of flow, autonomy and relatedness were associated with increases in dimensions of wellbeing.

Management Guidelines for New Warm-Season Grasses in Australia

After more than 30 years in which ‘Tifgreen’ and ‘Tifdwarf’ were the only greens-quality varieties available, the choice for golf courses and bowls clubs in northern Australia has been expanded to include six new Cynodon hybrids [Cynodon dactylon (L.) Pers x Cynodon transvaalensis Burtt-Davy]. Five of these – ‘Champion Dwarf’ (Texas), ‘MS-Supreme’ (Mississippi), FloraDwarf™ (Florida), ‘TifEagle’ (Georgia), MiniVerde™ (Arizona) - are from US breeding programs, while the sixth, ‘TL2’ (marketed as Novotek™) was selected in north Queensland. The finer, denser and lower growing habit of the “ultradwarf” cultivars allows very low mowing heights (e.g. 2.5 mm) to be imposed, resulting in denser and smoother putting and bowls surfaces. In addition to the Cynodon hybrids, four new greens quality seashore paspalum (Paspalum vaginatum O. Swartz) cultivars including ‘Sea Isle 2000’, Sea Isle Supreme™, Velvetene™ and Sea Dwarf™ (where tolerance of salty water is required) expands the range of choices for greens in difficult environments. The project was developed to determine (a) the appropriate choice of cultivar for different environments and budgets, and (b) best management practices for the new cultivars which differ from the Cynodon hybrid industry standards ‘Tifgreen’ and ‘Tifdwarf’. Management practices, particularly fertilising, mowing heights and frequency, and thatch control were investigated to determine optimum management inputs and provide high quality playing surfaces with the new grasses. To enable effective trialling of these new and old cultivars it was essential to have a number of regional sites participating in the study. Drought and financial hardship of many clubs presented an initial setback with numerous clubs wanting to be involved in the study but were unable to commit due to their financial position at the time. The study was fortunate to have seven regional sites from Queensland, New South Wales, Victoria and South Australia volunteer to be involved in the study which would add to the results being collected at the centralised test facility being constructed at DEEDI’s Redlands Research Station. The major research findings acquired from the eight trial sites included: • All of the new second generation “ultradwarf” couchgrasses tend to produce a large amount of thatch with MiniVerde™ being the greatest thatch producer, particularly compared to ‘Tifdwarf’ and ‘Tifgreen’. The maintenance of the new Cynodon hybrids will require a program of regular dethatching/grooming as well as regular light dustings of sand. Thatch prevention should begin 3 to 4 weeks after planting a new “ultradwarf” couchgrass green, with an emphasis on prevention rather than control. • The “ultradwarfs” produced faster green speeds than the current industry standards ‘Tifgreen’ and ‘Tifdwarf’. However, all Cynodon hybrids were considerably faster than the seashore paspalums (e.g. comparable to the speed diference of Bentgrass and couchgrass) under trial conditions. Green speed was fastest being cut at 3.5 mm and rolled (compared to 3.5 mm cut, no roll and 2.7 mm cut, no roll). • All trial sites reported the occurrence of disease in the Cynodon hybrids with the main incidence of disease occurring during the dormancy period (autumn and winter). The main disease issue reported was “patch diseases” which includes both Gaumannomyces and Rhizoctonia species. There was differences in the severity of the disease between cultivars, however, the severity of the disease was not consistent between cultivars and is largely attributed to an environment (location) effect. In terms of managing the occurrence of disease, the incidence of disease is less severe where there is a higher fertility rate (about 3 kgN/100m2/year) or a preventitatve fungicide program is adopted. • Cynodon hybrid and seashore paspalum cultivars maintained an acceptable to ideal surface being cut between 2.7 mm and 5.0 mm. “Ultradwarf” cultivars can tolerate mowing heights as low as 2.5 mm for short periods but places the plant under high levels of stress. Greens being maintained at a continually lower cutting height (e.g. 2.7 mm) of both species is achievable, but would need to be cut daily for best results. Seashore paspalums performed best when cut at a height of between 2.7 mm and 3.0 mm. If a lower cutting height is adopted, regular and repeated mowings are required to reduce scalping and produce a smooth surface. • At this point in time the optimum rate of nitrogen (N) for the Cynodon hybrids is 3 kg/100m2/year and while the seashore paspalums is 2 to 3 kg/100m2/year. • Dormancy occurred for all Cynodon and seashore paspalum culitvars from north in Brisbane (QLD) to south in Mornington Peninsula (VIC) and west to Novar Gardens (SA). Cynodon and Paspalum growth in both Victoria and South Australia was less favourable as a result of the cooler climates. • After combining the data collected from all eight sites, the results indicated that there can be variation (e.g. turfgrass quality, colour, disease resistance, performace) depending on the site and climatic conditions. Such evidence highlights the need to undertake genotype by environment (G x E) studies on new and old cultivars prior to conversion or establishment. • For a club looking to select either a Cynodon hybrid or seashore paspalum cultivar for use at their club they need to: - Review the research data. - Look at trial plots. - Inspect greens in play that have the new grasses. - Select 2 to 3 cultivars that are considered to be the better types. - Establish them in large (large enough to putt on) plots/nursery/practice putter. Ideally the area should be subjected to wear. - Maintain them exactly as they would be on the golf course/lawn bowls green. This is a critical aspect. Regular mowing, fertilising etc. is essential. - Assess them over at least 2 to 3 years. - Make a selection and establish it in a playing green so that it is subjected to typical wear.

Developing and communicating strategies for controlling virus diseases in vegetable cucurbit crops

Virus diseases cause serious yield and quality losses in field grown cucurbit crops worldwide. In Australia, the main viruses of cucurbits are Papaya ringspot virus (PRSV), Squash mosaic virus (SqMV), Watermelon mosaic virus (WMV) and Zucchini yellow mosaic virus (ZYMV). Plants infected early have severely distorted fruit. High infection incidences, of ZYMV and PRSV in crops cause losses of marketable fruit of up to 100% and infected crops are often abandoned. Two new alternative hosts of ZYMV were identified, the native cucurbit Cucumis maderaspatanus and wild legume Rhyncosia minima. No new alternative hosts of PRSV, SqMV or WMV were found in Western Australia or Queensland. Seed transmission of ZYMV (0.7%) was found in seedlings grown from ZYMV-infected fruit of zucchini but not of pumpkin. None was detected with PRSV or SqMV in zucchini or pumpkin seedlings, respectively. ZYMV spread to pumpkins by aphids was greater downwind than upwind of a virus source. Delaying sowing by 2 weeks decreased ZYMV spread. Millet non-host barriers between pumpkin plantings slowed ZYMV infection. Host resistance gene (zym) in cucumber cultivars was effective against ZYMV. Pumpkin cultivars with resistance gene (Zym) became infected under high virus pressure but leaf symptoms were milder and infected plants higher yielding with more market-acceptable fruit than those without Zym. Most zucchini cultivars with Zym developed severe leaf and fruit symptoms. ZYMV, PRSV, WMV and SqMV spread readily from infected to healthy cucurbit plants by direct leaf contact. ZYMV survives and remains infective on diverse surfaces for up to 6 hours but can be inactivated by some disinfectants. Phylogenetic analysis indicates at least three separate introductions of ZYMV into Australia, with new introductions rarely occurring. ZYMV isolates clustered into three groups according to collection location i) Kununurra, ii) Northern Territory and iii) Carnarvon, Qld and Vic. A multiplex Real-Time PCR was developed which distinguished between the three groups of Australian isolates. Integrated disease management (IDM) strategies for virus diseases of vegetable cucurbit crops grown in the field were improved incorporating the new information gathered. These strategies are aimed at causing using minimal extra expense, labour demands and disruption to normal practices.

Social marketers playing to win? Experiential value creation in social marketing mobile games

The rapid change of technological trends in the marketplace has increased the difficulty for social marketers to reach consumers using traditional marketing channels (Della et al., 2008). Traditionally, social marketing interventions have typically used more conventional supporting products and services such as water counters for water conservation or condoms for sex safety. However, recently social marketers are witnessing the diminishing effectiveness of more traditional social products and services in encouraging the uptake and maintenance of behaviour. In light of the technological trends in the marketplace and diminishing effect of previous social products and services (Lefebvre, 2009), social marketers have been encouraged to look to alternate means of delivering valuable offerings...

‘Lemon Laws’: an inquiry into consumer protections and remedies for buyers of new motor vehicles

1. Under the Terms of Reference for the Committee’s Inquiry, ‘lemons’ are defined as ‘new motor vehicles with numerous, severe defects that re-occur despite multiple repair attempts or where defects have caused a new motor vehicle to be out of service for a prolonged period of time’. Consumers are currently protected in relation to lemon purchases by the Australian Consumer Law (ACL) located in Schedule 2 of the Competition and Consumer Act 2010 (Cth) (CCA). The ACL applies as a law of Queensland pursuant to the Fair Trading Act 1989 (Qld). The voluntary recall and consumer guarantees law took effect on 1 January 2011. 2. In 2006, the Government of Victoria made a commitment to introduce a lemon law into the provisions of the then Fair Trading Act 1999 (Vic). The public consultation process on the proposal to introduce a lemon law for motor vehicle purchases in Victoria was conducted by Ms Janice Munt MP, with the assistance of Consumer Affairs Victoria (CAV). CAV released an Issues Paper to canvas with industry and the community options for the development and introduction of a motor vehicle lemon law.(Consumer Affairs Victoria, Introducing Victorian motor vehicle lemon laws, Issues Paper, (September, 2007). 3. A CAV report prepared by Janice Munt MP was released in July, 2008 (Consumer Affairs Victoria, Motor Cars: A report on the motor vehicle lemon law consultations (July 2008) (Victorian Lemon Law Report). However, the Victorian proposal was overtaken by events leading to the adoption of a uniform consumer protection law in all Australian jurisdictions, the ACL. 4. The structure of this submission is to consider first the three different bases upon which consumers can obtain relief for economic loss arising from defects in motor vehicles. The second part of the submission considers the difficulties encountered by consumers in litigating motor vehicle disputes in the courts and tribunals. The third part of the submission examines the approach taken in other jurisdictions to resolving motor vehicle disputes. The final part of the submission considers a number of possible reforms that could be made to the existing law and its enforcement to reduce consumer detriment arising from the purchase of ‘lemon’ motor vehicles. 5. There are three principal bases upon which a consumer can obtain redress for defects in new motor vehicles under the ACL. The first is where the manufacturer admits liability and initiates the voluntary recall procedure provided for in s 128 of the ACL. Under this basis the manufacturer generally repairs or replaces the part subject to the recall free of charge. The second basis is where the manufacturer or dealer denies liability and the consumer is initiates proceedings in the court or tribunal seeking a statutory remedy under the ACL, the nature of which will depend on whether the failure to comply with the consumer guarantee was major or not. The third basis upon which a consumer can obtain redress is pursuant to public enforcement by the ACCC. Each basis will be considered in this part. What all three bases have in common is the need to conduct an investigation to identify the nature of the defect and how it arose.

Experimental investigation of the effects of oxygenated fuels on exhaust emissions in a heavy duty diesel engine

Physical and chemical properties of biofuels vary among various feedstocks and their subsequent conversions to fuels. The biofuels contain various amounts of oxygen, and this has a significant influence on exhaust emission. This oxygen content has been considered in order to investigate its effect on diesel engine exhaust emissions. The experiments have been conducted with a heavy duty diesel engine and various oxygenated fuels. It is found that the amount of oxygen in the fuel has a high level of influence on its exhaust emissions, and this provides agreement with diesel emissions results such as PN reduction. By increasing the amount of oxygen in the blend (by adding more biofuel), the particulate number (PN) is reduced and NOx increases gradually. However, the variation of PN and NOx are not similar for waste cooking biodiesel (WCBD) and butanol blend, even though their oxygen content are the same in the blends. This is due to the source of the biofuel and their internal chemistry.

Analysis and prevention of extreme vibration in high speed craft - A research framework

Extreme vibration has been reported for small, high speed craft in the maritime sector, with performance and health threatening effects on boat operators and crew. Musculoskeletal injuries are an enduring problem for high speed craft passengers. Spinal or joint injuries and neurological disorders may occur from repetitive pounding over rough water, continued vibration and single impact events. The risk from whole body vibration (WBV) induced through the small vessels mainly depends on time spent on the craft, which can’t be changed in a military scenario; as well as the number of shocks and jolts, and their magnitude and frequency. In the European Union for example, physical agents directives require all employers to control exposure to a number of physical agents including noise and vibration. The EC Vibration Directive 2002/44/EC then sets out regulations for the control of health and safety risks from the exposure of workers to hand arm vibration (HAV) and WBV in the workplace. Australia has exposure standards relating to WBV, AS 2670.1-2001 – Evaluation of human exposure to whole body vibration. This standard is identical to the ISO 2631-1:1997, Mechanical vibration and shock – Evaluation of human exposure to whole-body vibration. Currently, none of the jurisdictions in Australia have specific regulations for vibration exposures in workplaces. However vibration is mentioned to varying degrees in their general regulations, codes of practice and guidance material. WBV on high speed craft is normally caused by “continuous 'hammering' from short steep seas or wind against tide conditions. Shock on High Speed Craft is usually caused by random impacts. Military organisations need the knowledge to make informed decisions regarding their marine operations, compliance with legislation and potentially harmful health effects, and develop and implement appropriate counter-measures. Marine case studies in the UK such as published MAIB (Marine Accident Investigation Branch) reports show injuries that have occurred in operation, and subsequent MCA (Maritime Coastguard Agency) guidance is provided (MGN 436 (M+F), WHOLE-BODY VIBRATION: Guidance on Mitigating Against the Effects of Shocks and Impacts on Small Vessels. MCA, 2011). This paper proposes a research framework to study the origin, impact and pathways for prevention of WBV in small, high speed craft in a maritime environment.

Exploring changing culture and building capacity in research with consumers, carers and consumer companions

Background Australian policy mandates consumer and carer participation in mental health services at all levels including research. Inspired by a UK model - Service Users Group Advising on Research [SUGAR] - we conducted a scoping project in 2013 with a view to create a consumer and carer led research process that moves beyond stigma and tokenism, that values the unique knowledge of lived experience and leads to people being treated better when accessing services. This poster presents the initial findings. Aims The project’s purpose was to explore with consumers, consumer companions and carers at the Metro North Mental Health-RBWH their interest in and views about research partnerships with academic and clinical colleagues. Methods This poster overviews the initial findings from three audio-recorded focus groups conducted with a total of 14 consumers, carers and consumer companions at the Brisbane site. Analysis Our work was guided by framework analysis (Gale et al. 2013). It defines 5 steps for analysing narrative data: familiarising; development of categories; indexing; charting and interpretation. Eight main ideas were initially developed and were divided between the authors to further index. This process identified 37 related analytic ideas. The authors integrated these by combining, removing and redefining them by consensus though a mapping process. The final step is the return of the analysis to the participants for feedback and input into the interpretation of the focus group discussions. Results 1. Value & Respect: Feeling Valued & Respected, Tokenism, Stigma, Governance, Valuing prior knowledge / background 2. Pathways to Knowledge and Involvement in Research: ‘Where to begin’, Support, Unity & partnership, Communication, Co-ordination, Flexibility due to fluctuating capacity 3. Personal Context: Barriers regarding Commitments & the nature of mental illness, Wellbeing needs, Prior experience of research, Motivators, Attributes 4. What is research? Developing Knowledge, What to do research on, how and why? Conclusion and Discussion Initial analysis suggests that participants saw potential for ‘amazing things’ in mental health research such as reflecting their priorities and moving beyond stigma and tokenism. The main needs identified were education, mentoring, funding support and research processes that fitted consumers’ and carers’limitations and fluctuating capacities. They identified maintaining motivation and interest as an issue since research processes are often extended by ethics and funding applications. Participants felt that consumer and carer led research would value the unique knowledge that the lived experience of consumers and carers brings and lead to people being treated better when accessing services.