On representing chemical environments

We review some recently published methods to represent atomic neighbourhood environments, and analyse their relative merits in terms of their faithfulness and suitability for fitting potential energy surfaces. The crucial properties that such representations (sometimes called descriptors) must have are differentiability with respect to moving the atoms, and invariance to the basic symmetries of physics: rotation, reflection, translation, and permutation of atoms of the same species. We demonstrate that certain widely used descriptors that initially look quite different are specific cases of a general approach, in which a finite set of basis functions with increasing angular wave numbers are used to expand the atomic neighbourhood density function. Using the example system of small clusters, we quantitatively show that this expansion needs to be carried to higher and higher wave numbers as the number of neighbours increases in order to obtain a faithful representation, and that variants of the descriptors converge at very different rates. We also propose an altogether new approach, called Smooth Overlap of Atomic Positions (SOAP), that sidesteps these difficulties by directly defining the similarity between any two neighbourhood environments, and show that it is still closely connected to the invariant descriptors. We test the performance of the various representations by fitting models to the potential energy surface of small silicon clusters and the bulk crystal.

Performance of magnesia cements in porous blocks in acid and magnesium environments

The performance of porous blocks containing three different reactive magnesia-based cements - namely magnesia alone, magnesium oxide: Portland cement (PC) in 1:1 ratio, cured in ambient conditions, and magnesia alone, cured at elevated carbon dioxide conditions, in hydrochloric acid and magnesium sulfate solution - was investigated. Different aggressive chemical solution conditions were used, to which the samples were exposed for up to 12 months and then tested for strength and microstructure. The performance was also compared with that of standard PC-based blocks. The results showed the significant resistance to chemical attack offered by magnesia, both alone and with PC blend in the porous blocks when cured under ambient carbon dioxide conditions, and confirmed the much poorer performance of blocks made from PC alone. The blocks of solely magnesia cured in elevated carbon dioxide conditions, at 20% concentration, showed slightly lower resistance to acid attack than PC; however, the resistance to sulfate attack was much higher. © 2012 Thomas Telford Ltd.

Density stratified environments: The double-tank method

We present an alternative method of producing density stratifications in the laboratory based on the 'double-tank' method proposed by Oster (Sci Am 213:70-76, 1965). We refer to Oster's method as the 'forced-drain' approach, as the volume flow rates between connecting tanks are controlled by mechanical pumps. We first determine the range of density profiles that may be established with the forced-drain approach other than the linear stratification predicted by Oster. The dimensionless density stratification is expressed analytically as a function of three ratios: the volume flow rate ratio n, the ratio of the initial liquid volumes λ and the ratio of the initial densities ψ. We then propose a method which does not require pumps to control the volume flow rates but instead allows the connecting tanks to drain freely under gravity. This is referred to as the 'free-drain' approach. We derive an expression for the density stratification produced and compare our predictions with saline stratifications established in the laboratory using the 'free-drain' extension of Oster's method. To assist in the practical application of our results we plot the region of parameter space that yield concave/convex or linear density profiles for both forced-drain and free-drain approaches. The free-drain approach allows the experimentalist to produce a broad range of density profiles by varying the initial liquid depths, cross-sectional and drain opening areas of the tanks. One advantage over the original Oster approach is that density profiles with an inflexion point can now be established. © 2008 Springer-Verlag.

Efficient statistical electromagnetic analysis in reverberant environments

This paper presents a statistical approach to the electromagnetic analysis of a system that lies within a reverberant cavity that has random or uncertain properties. The need to solve Maxwell's equations within the cavity is avoided by employing a relation known as the diffuse field reciprocity principle, which leads directly to the ensemble mean squared response of the system; all that is required is the impedance matrix of the system associated with radiation into infinite space. The general theoretical approach is presented, and the analysis is then applied to a five-cable bundle in a reverberation room © 2013 EMC Europe Foundation.

Relationships between Testate Amoebae Assemblages (Protozoa) and Geographic Factors in Yunnan Plateau Lakes, China

Knowledge of the effect of geographic factors on the assemblages of protozoan testate amoebae is still limited, despite there having been a number of studies on this fauna. We applied statistical analyses to data on the distribution of testate amoebae from nine major lakes in the Yunnan Plateau, southwest China. Cluster analysis, based on community structure, separated the lakes into two groups - the oligotrophic/mesotrophic lakes and the hypercutrophic lakes - confirming the idea that the testate amoebae assemblages in lakes are closely related to the trophic status. Additionally, within the oligotrophic/mesotrophic lakes, there was distinct geographic clustering. Linear regression analysis and the Mantel test both revealed that similarity of species composition decreased with increasing geographic distance among the oligotrophic/mesotrophic lakes.

THE RESPONSES OF Microcystis TO SEDIMENT ENVIRONMENTS AND THE ASSESSMENT FOR ITS OVERWINTERING - A SIMULATION STUDY IN A NOVEL DEVICE

A novel multi-cell device made of organic glass was designed to study morphological and physiological characteristics of Microcystis population trapped in simulated sediment conditions. Changes of colonial morphology and antioxidant activities of the population were observed and measured over the range of 31-day incubation. During the incubation, the antioxidant enzyme activities fluctuated significantly in sediment environments. The activities of catalase (CAT), glutathione peroxidase (GPx) and malondialdehyde (NIDA) reached the highest on the 11(th) day, 6(th) day and 6(th) day. respectively, and then dropped down remarkably in the following days. The ratios of Fv/Fm and the maximal electron transfer rate (ETRm) declined during the initial days (1 similar to 11(th) day), but rebounded on the 16(th) day, which were consistent with the variations of total protein. In the end of incubation. gas vacuoles were hard]), observed and the gelatinous sheath was partly disappeared in the population of Microcystis. Nevertheless, the remaining populations. upon transferred to culture medium, were able to grow though experiencing a longer lag phase of nine days. The results indicated that the sediment environments were able to cause negative effects on M. aeruginosa cells. The cells, however, responded to against the possible damage afterwards. It is thus proposed the acute responses in the population during the early stage of sedimentation could be of importance in aiding the long-term survivor of Microcystis and recruitment in lake sediments. The present study also demonstrated the utility of the device in simulating the sediment environments for further investigation.

Testate amoebae (Protozoa : Rhizopoda) from northwest Yunnan, China

A survey of the testate amoebae of northwest Yunnan in the Hengduan Mountains region of southwest China revealed 151 species belonging to 29 genera. Of these, three genera and 27 species were new to the testate amoebae fauna of China. The widely distributed and dominant species were Centropyxis aculeata aculeata, C aerophila aerophila, C. sylvatica, Difflugia elegans, D. globulosa, D. pristis, D. pulex, Phryganella hemisphaerica, Trinema enchelys, and T lineare. The most diverse genera were Difflugia (41 species), Centropyxis (31 species), Arcella (18 species), and Euglypha (11 species). The number of species in each sample varied greatly. It appears that species diversity of testate amoebae is related not only to macro-environments (e.g., geographic zonation) but also to microenvironments (e.g., microhabitats).

Large-payload climbing in complex vertical environments using thermoplastic adhesive bonds

Despite many approaches proposed in the past, robotic climbing in a complex vertical environment is still a big challenge. We present here an alternative climbing technology that is based on thermoplastic adhesive (TPA) bonds. The approach has a great advantage because of its large payload capacity and viability to a wide range of flat surfaces and complex vertical terrains. The large payload capacity comes from a physical process of thermal bonding, while the wide applicability benefits from rheological properties of TPAs at higher temperatures and intermolecular forces between TPAs and adherends when being cooled down. A particular type of TPA has been used in combination with two robotic platforms, featuring different foot designs, including heating/cooling methods and construction of footpads. Various experiments have been conducted to quantitatively assess different aspects of the approach. Results show that an exceptionally high ratio of 500% between dynamic payloads and body mass can be achieved for stable and repeatable vertical climbing on flat surfaces at a low speed. Assessments on four types of typical complex vertical terrains with a measure, i.e., terrain shape index ranging from -0.114 to 0.167, return a universal success rate of 80%-100%. © 2004-2012 IEEE.

Geographic distribution of Pelteobagrus fulvidraco and Pelteobagrus vachelli in the Yangtze River based on mitochondrial DNA markers

Three populations of Pelteobagrus vachelli and Pelteobagrus fulvidraco of the Yangtze River were examined by PCR-RFLP analysis of mitochondrial DNA fragments. ND5/6 and D-loop fragments were digested by 10 restriction endonucleases. Significant geographic variations between upstream and mid-downstream populations in the haplotype frequencies and restriction patterns were revealed. This suggested that the diversity of P. vachelli was high; 11 haplotypes were obtained from all the samples. The upstream population shared seven haplotypes and the middle and downstream populations shared another four haplotypes. Among all of the haplotypes, one haplotype was shared in 30 samples of the populations from middle and downstream, but it was not found in the upstream population. Any haplotype found in the upstream population was not detected in the middle and downstream populations. Genetic diversity of P. fulvidraco was low and only five haplotyes were detected from all 60 samples. Phylogenic relationships also indicated that the fishes from upstream and mid-downstream were apparently divided into two populations.

A survey of the gomphonemaceae and cymbellaceae (Bacillariophyta) from the Jolmolungma Mountain (Everest) region of China

Gomphonemaceae and Cymbellaceae from Jolmolungma Mountain region of China, comprised 79 taxa belonging to five genera. The dominant species were Gomphonema angustatum var. productum, G. gracile var. gracile, G. parvulum var. parvulum, G. hedini, Cymbella aequalis var. pisciculus, C. delicatula, C. cistula, C. cistula var. hebetata, C. cesatii, C. cymbiformis, C microcephala, C. minuta var. minuta., C. minuta var. silesiaca, C. pusilla, C. affinis. Some arctic and alpine forms also occurred, and the following taxa were unique to this region: Cymbella delicatula, C. naviculiformis, C. gracilis, C. minuta var. minuta, C. affinis, C. cistula, C. cymbiformis, C. cistula var. hebetata, C. arctica, Didymosphenia geminata, Gomphonema hedinii, G. olivaceum. Numbers of taxa in each samples varied greatly, It appears that species diversity of diatoms is related not only to macro-environments (e.g., geographic zonation) but also to microenvironments (e.g., microhabitats and microclimates). Cymbella spp. are not only comparatively widespread in the region but also outnumber Gomphonema spp. A large number of species found in the Jolmolungma Mountain region are also found in Tibet and the headwaters of Yangtze River.