Seawater carbonate chemistry and reproduction of the two calanoid copepods Centropages typicus and Temora longicornis in a laboratory experiment

Some planktonic groups suffer negative effects from ocean acidification (OA), although copepods might be less sensitive. We investigated the effect of predicted CO2 levels (range 480-750 ppm), on egg production and hatching success of two copepod species, Centropages typicus and Temora longicornis. In these short-term incubations there was no significant effect of high CO2 on these parameters. Additionally a very high CO2 treatment, (CO2 = 9830 ppm), representative of carbon capture and storage scenarios, resulted in a reduction of egg production rate and hatching success of C. typicus, but not T. longicornis. In conclusion, reproduction of C. typicus was more sensitive to acute elevated seawater CO2 than that of T. longicornis, but neither species was affected by exposure to CO2 levels predicted for the year 2100. The duration and seasonal timing of exposures to high pCO2, however, might have a significant effect on the reproduction success of calanoid copepods.

(Table 1) Pore-water composition of ODP Leg 126 sites

The Ocean Drilling Program Leg 126 sites may be classified into two categories depending on the presence (Group I: Sites 787, 792, and 793) or absence (Group II: Sites 788, 790, and 791) of steep concentration gradients. Shipboard X-ray diffraction analyses of bulk sediments from Group I sites revealed the presence of a number of diagenetic minerals (some of which are incompatible), but no systematic diagenetic zonation. The results of the chemical analyses of the pore waters from Group I have been used to estimate the activities of dissolved species. Thermodynamic analyses of the composition of the pore waters and the stability of authigenic minerals (gypsum, zeolites, feldspars, smectites, chlorites, and micas) show that the pore waters are close to equilibrium with most of the observed phases. Thus, only a small perturbation of the system (substitution in minerals and fluctuations in pore-water composition, in particular, in pH and SiO2 activity) will cause any of these phases to precipitate. Therefore, one would not expect mineralogical observations to show systematic vertical zonations at these sites. It is suggested that chlorites and high-temperature zeolites are not diagenetic sensu stricto, but were eroded from volcaniclastic highs. The absence of concentration gradients at the Group II sites has been analyzed in terms of reaction kinetics, hydrothermal advection, and temperature distribution. The absence of diagenetic imprints on the pore-water concentration profiles at these sites is probably caused by the slow nucleation of silica phases.

Hydrological and meteorological investigations in a lake near Kangerlussuaq, west Greenland

Few hydrological studies have been made in Greenland, other than on glacial hydrology associated with the ice sheet. Understanding permafrost hydrology and hydroclimatic change and variability, however, provides key information for understanding climate change effects and feedbacks in the Arctic landscape. This paper presents a new extensive and detailed hydrological and meteorological open access dataset, with high temporal resolution from a 1.56 km**2 permafrost catchment with a lake underlain by a through talik close to the ice sheet in the Kangerlussuaq region, western Greenland. The paper describes the hydrological site investigations and utilized equipment, as well as the data collection and processing. The investigations were performed between 2010 and 2013. The high spatial resolution, within the investigated area, of the dataset makes it highly suitable for various detailed hydrological and ecological studies on catchment scale.

Narratives Around Iberian Culture at Valencia Museums and Archaeological Sites: From Official Discourses to Social Perceptions

Museums and archaeological sites are considered the most authoritative places for talking about the past and the heritage from a scientific perspective. In fact, visitors assume their discourses as reliable and indisputable. In spite of that, professionals of archaeology must critically analyse the production of narratives at heritage sites, since they often reflect social, political and identity issues related to the present-day realities. The aim of this paper is to study official and popular discourses about the Iberian culture (Iron Age) collected in museums and archaeological sites from Valencia region.

Data for the co-expression and purification of human recombinant CaMKK2 in complex with calmodulin in Escherichia coli

Calcium/calmodulin-dependent kinase kinase 2 (CaMKK2) has been implicated in a range of conditions and pathologies from prostate to hepatic cancer. Here, we describe the expression in Escherichia coli and the purification protocol for the following constructs: full-length CaMKK2 in complex with CaM, CaMKK2 'apo', CaMKK2 (165-501) in complex with CaM, and the CaMKK2 F267G mutant. The protocols described have been optimized for maximum yield and purity with minimal purification steps required and the proteins subsequently used to develop a fluorescence-based assay for drug binding to the kinase, "Using the fluorescent properties of STO-609 as a tool to assist structure-function analyses of recombinant CaMKK2"

Sustainable Catalysis : Rational Pd Loading on MIL-101Cr-NH2 for More Efficient and Recyclable Suzuki-Miyaura Reactions

Palladium nanoparticles have been immobilized into an amino-functionalized metal-organic framework (MOF), MIL-101Cr-NH2, to form Pd@MIL-101Cr-NH2. Four materials with different loadings of palladium have been prepared (denoted as 4-, 8-, 12-, and 16wt%Pd@MIL-101Cr-NH2). The effects of catalyst loading and the size and distribution of the Pd nanoparticles on the catalytic performance have been studied. The catalysts were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), N-2-sorption isotherms, elemental analysis, and thermogravimetric analysis (TGA). To better characterize the palladium nanoparticles and their distribution in MIL-101Cr-NH2, electron tomography was employed to reconstruct the 3D volume of 8wt%Pd@MIL-101Cr-NH2 particles. The pair distribution functions (PDFs) of the samples were extracted from total scattering experiments using high-energy X-rays (60keV). The catalytic activity of the four MOF materials with different loadings of palladium nanoparticles was studied in the Suzuki-Miyaura cross-coupling reaction. The best catalytic performance was obtained with the MOF that contained 8wt% palladium nanoparticles. The metallic palladium nanoparticles were homogeneously distributed, with an average size of 2.6nm. Excellent yields were obtained for a wide scope of substrates under remarkably mild conditions (water, aerobic conditions, room temperature, catalyst loading as low as 0.15mol%). The material can be recycled at least 10times without alteration of its catalytic properties.

Kvinnors upplevelser av att leva med bröstcanceren litteraturöversikt

Bakgrund: Bröstcancer är den vanligaste cancerformen hos kvinnor och antalet bröstcancerfall ökar. En cancerdiagnos leder till många emotionella förändringar. Som vårdpersonal är det viktigt att ha vetskap och förståelse om patientens subjektiva upplevelser kring sin sjukdom för att kunna ge en god vård. Syfte: Syftet med litteraturstudien är att beskriva kvinnors upplevelser av att leva med bröstcancer. Metod: Databaserna PubMed och Cinahl användes i sökningen av artiklar. Resultaten i artiklarna har analyserats genom en analysmetod för kvalitativa studier och resultatet i litteraturstudien baseras på 14 vetenskapliga artiklar av kvalitativ ansats. Resultat: Kvinnorna upplevde negativa förändringar i deras vardagliga liv relaterat till sjukdomen både fysiskt, psykiskt och socialt. De upplevde en förändrad roll i familjen och som kvinna. Vilken och hur mycket information kvinnorna önskade få om sitt tillstånd varierade. Kvinnorna fick en ny syn på livet och de uppskattade livet mer än de gjorde innan sjukdomen. Slutsats: Kvinnorna upplevde många svårigheter i och med bröstcancersjukdomen och dessa upplevelser är viktiga att ha i beaktande i vårdandet av patienter med bröstcancer.

Stress på akutmottagningen ur ett sjuksköterskeperspektiv : En litteraturstudie

Sjuksköterskor som arbetar på akutmottagningar utsätts regelbundet för stress. Det medför psykiska och fysiska besvär för sjuksköterskor och försämrad omvårdnad för patienten. Studien avser att utifrån vetenskaplig litteratur sammanställa de faktorer som leder till stress för sjuksköterskor som arbetar på akutmottagningar och hur vården påverkas av stressade sjuksköteskor. Syfte Syftet med litteraturstudien var att beskriva vilka faktorer på akutmottagningen som upplevdes bidra till stress för sjuksköterskor som arbetar på en akutmottagning och hur stressen påverkar sjuksköterskors möjligheter att erbjuda en god vård för patienter på akutmottagningen. Metod Studien har genomförts som en litteraturstudie. I studien användes 15 artiklar som bestod av både kvalitativ och kvantitativ ansats. Materialet hämtades i databaserna CINAHL och PubMed. Resultat Resultatet visar att det finns flera olika faktorer som bidrar till stress för sjuksköterskor på akutmottagningen. Stressande faktorer visade sig utifrån studierna i resultatet vara; hög arbetsbelastning och låg bemanning, avsaknad av tid för reflektion för sjuksköterskan, att vårda barn i stressade situationer, hot och våld på akutmottagningen, kommunikation samt smärta och lidande. Hur vården påverkas av sjuksköterskors stress på akutmottagningen var utifrån studierna att patientsäkerheten blev försämrad och att vårdrelationen påverkades. Slutsats Författarna drar slutsatsen att stress påverkar sjuksköteskors arbetsuppgifter på akutmottagningen. Patienters möjlighet till patientsäker och god vård på akutmottagningen påverkas negativt av stressade sjuksköterskor. För att komma till rätta med sjuksköterskebristen på akutmottagningar så är det av betydelse för sjukhusledningen att arbeta preventivt mot stressade sjuksköterskor.

Evaluation of a versatile energy auditing tool

Energy auditing can be an important contribution for identification and assessment of energy conservation measures (ECMs) in buildings. Numerous tools and software have been developed, with varying degree of precision and complexity and different areas of use.   This paper evaluates PHPP as a versatile, easy-to-use energy auditing tool and gives examples of how it has been compared to a dynamic simulation tool, within the EU-project iNSPiRe. PHPP is a monthly balance energy calculation tool based on EN13790. It is intended for assisting the design of Passive Houses and energy renovation projects and as guidance in the choice of appropriate ECMs.   PHPP was compared against the transient simulation software TRNSYS for a single family house and a multi-family house. It should be mentioned that dynamic building simulations might strongly depend on the model assumptions and simplifications compared to reality, such as ideal heating or real heat emission system. Setting common boundary conditions for both PHPP and TRNSYS, the ideal heating and cooling loads and demands were compared on monthly and annual basis for seven European locations and buildings with different floor area, S/V ratio, U-values and glazed area of the external walls.   The results show that PHPP can be used to assess the heating demand of single-zone buildings and the reduction of heating demand with ECMs with good precision. The estimation of cooling demand is also acceptable if an appropriate shading factor is applied in PHPP. In general, PHPP intentionally overestimates heating and cooling loads, to be on the safe side for system sizing. Overall, the agreement with TRNSYS is better in cases with higher quality of the envelope as in cold climates and for good energy standards. As an energy auditing tool intended for pre-design it is a good, versatile and easy-to-use alternative to more complex simulation tools.

Survery and simulation of energy use in the European building stock

the work towards increased energy efficiency. In order to plan and perform effective energy renovation of the buildings, it is necessary to have adequate information on the current status of the buildings in terms of architectural features and energy needs. Unfortunately, the official statistics do not include all of the needed information for the whole building stock.   This paper aims to fill the gaps in the statistics by gathering data from studies, projects and national energy agencies, and by calibrating TRNSYS models against the existing data to complete missing energy demand data, for countries with similar climate, through simulation. The survey was limited to residential and office buildings in the EU member states (before July 2013). This work was carried out as part of the EU FP7 project iNSPiRe.   The building stock survey revealed over 70% of the residential and office floor area is concentrated in the six most populated countries. The total energy consumption in the residential sector is 14 times that of the office sector. In the residential sector, single family houses represent 60% of the heated floor area, albeit with different share in the different countries, indicating that retrofit solutions cannot be focused only on multi-family houses.   The simulation results indicate that residential buildings in central and southern European countries are not always heated to 20 °C, but are kept at a lower temperature during at least part of the day. Improving the energy performance of these houses through renovation could allow the occupants to increase the room temperature and improve their thermal comfort, even though the potential for energy savings would then be reduced.

Experimental study of forces and energies during shearing of steel sheet with angled tools

Shearing is a fast and inexpensive method to cut sheet metal that has been used since the beginning of the industrialism. Consequently, published experimental studies of shearing can be found from over a century back in time. Recent studies, however, are due to the availability of low cost digital computation power, mostly based on finite element simulations that guarantees quick results. Still, for validation of models and simulations, accurate experimental data is a requisite. When applicable, 2D models are in general desirable over 3D models because of advantages like low computation time and easy model formulation. Shearing of sheet metal with parallel tools is successfully modelled in 2D with a plane strain approximation, but with angled tools the approximation is less obvious. Therefore, plane strain approximations for shearing with angled tools were evaluated by shear experiments of high accuracy. Tool angle, tool clearance, and clamping of the sheet were varied in the experiments. The results showed that the measured forces in shearing with angled tools can be approximately calculated using force measurements from shearing with parallel tools. Shearing energy was introduced as a quantifiable measure of suitable tool clearance range. The effects of the shearing parameters on forces were in agreement with previous studies. Based on the agreement between calculations and experiments, analysis based on a plane strain assumption is considered applicable for angled tools with a small (up to 2 degrees) rake angle.