A two-dimensional finite element model of front surface current flow in cells under non-uniform, concentrated illumination

A two-dimensional finite element model of current flow in the front surface of a PV cell is presented. In order to validate this model we perform an experimental test. Later, particular attention is paid to the effects of non-uniform illumination in the finger direction which is typical in a linear concentrator system. Fill factor, open circuit voltage and efficiency are shown to decrease with increasing degree of non-uniform illumination. It is shown that these detrimental effects can be mitigated significantly by reoptimization of the number of front surface metallization fingers to suit the degree of non-uniformity. The behavior of current flow in the front surface of a cell operating at open circuit voltage under non-uniform illumination is discussed in detail.

Hydrodynamic stability theory of double ablation front structures in inertial confinement fusion.

The aim of inertial confinement fusion is the production of energy by the fusion of thermonuclear fuel (deuterium-tritium) enclosed in a spherical target due to its implosion. In the direct-drive approach, the energy needed to spark fusion reactions is delivered by the irradiation of laser beams that leads to the ablation of the outer shell of the target (the so-called ablator). As a reaction to this ablation process, the target is accelerated inwards, and, provided that this implosion is sufficiently strong a symmetric, the requirements of temperature and pressure in the center of the target are achieved leading to the ignition of the target (fusion). One of the obstacles capable to prevent appropriate target implosions takes place in the ablation region where any perturbation can grow even causing the ablator shell break, due to the ablative Rayleigh-Taylor instability. The ablative Rayleigh-Taylor instability has been extensively studied throughout the last 40 years in the case where the density/temperature profiles in the ablation region present a single front (the ablation front). Single ablation fronts appear when the ablator material has a low atomic number (deuterium/tritium ice, plastic). In this case, the main mechanism of energy transport from the laser energy absorption region (low density plasma) to the ablation region is the electron thermal conduction. However, recently, the use of materials with a moderate atomic number (silica, doped plastic) as ablators, with the aim of reducing the target pre-heating caused by suprathermal electrons generated by the laser-plasma interaction, has demonstrated an ablation region composed of two ablation fronts. This fact appears due to increasing importance of radiative effects in the energy transport. The linear theory describing the Rayleigh-Taylor instability for single ablation fronts cannot be applied for the stability analysis of double ablation front structures. Therefore, the aim of this thesis is to develop, for the first time, a linear stability theory for this type of hydrodynamic structures.

Developing front-end Web 2.0 technologies to access services, content and things in the future Internet

The future Internet is expected to be composed of a mesh of interoperable web services accessible from all over the web. This approach has not yet caught on since global user?service interaction is still an open issue. This paper states one vision with regard to next-generation front-end Web 2.0 technology that will enable integrated access to services, contents and things in the future Internet. In this paper, we illustrate how front-ends that wrap traditional services and resources can be tailored to the needs of end users, converting end users into prosumers (creators and consumers of service-based applications). To do this, we propose an architecture that end users without programming skills can use to create front-ends, consult catalogues of resources tailored to their needs, easily integrate and coordinate front-ends and create composite applications to orchestrate services in their back-end. The paper includes a case study illustrating that current user-centred web development tools are at a very early stage of evolution. We provide statistical data on how the proposed architecture improves these tools. This paper is based on research conducted by the Service Front End (SFE) Open Alliance initiative.

An experimental and theoretical study of unsteady flow (gust) effects on structures

The gust wind tunnel at IDR, Universidad Politécnica de Madrid (UPM), has been enhanced and the impact of the modification has been characterized. Several flow quality configurations have been tested. The problems in measuring gusty winds with Pitot tubes have been considered. Experimental results have been obtained and compared with theoretically calculated results (based on potential flow theory). A theoretical correction term has been proposed for unsteady flow measurements obtained with Pitot tubes. The effect of unsteady flow on structures and laying bodies on the ground has been also considered. A theoretical model has been proposed for a semi-circular cylinder and experimental tests have been performed to study the unsteady flow effects, which can help in clarifying the phenomenon.

Modelling experiments of the variations of the calving front position of Hansbreen, Svalbard

Hansbreen is a tidewater glacier in Svalbard, with grounded tongue, about 16 km in length and ca. 2.5 km in width at its tongue. The calving front position has shown, over the recent decades, a general retreating trend, often rather smooth but with some occasional abrupt changes. We apply a full-Stokes model of glacier dynamics, incorporating a crevasse-depth calving model, with the aim of reproducing the glacier front positions observed since 1936 and analyzing the sensitivity of the model to environmental parameters.

Definición, diseño e implementación de métricas de usuario final sobre componentes web en el lado Front-end, mediante Google Analytics

La web ha evolucionado hacia la participación en la creación de contenido tanto por desarrolladores expertos como por usuarios finales sin un gran conocimiento en esta área. A pesar de que su uso es igual de válido y funcional, las diferencias entre la calidad de los productos desarrollados por ambos puede llegar a ser considerable. Esta característica se observa con mayor claridad cuando se analizan los web components. El trabajo consiste en el desarrollo de un entorno capaz de recoger las métricas de calidad de los componentes, basadas en la interacción con ellos por parte de los usuarios. A partir de las métricas obtenidas, se determinará su calidad para realizar una mejora de la misma, en función de las características valoradas. La selección de las métricas se realiza mediante un estudio de las características que definen a un componente, y permiten ser analizadas. Para poder llevar a cabo la construcción del portal, se ha descrito un prototipo capaz de proporcionar un sistema para permitir que los componentes intercambien información entre ellos. El modelo ha sido integrado en los componentes que se han de evaluar para obtener nuevas métricas sobre esta característica. Se ha desarrollado un dashboard que permite la interacción sin limitaciones de los usuarios con los componentes, facilitándoles un sistema para conectar componentes, utilizando para ello el sistema previamente descrito. Como conclusión del trabajo, se puede observar la necesidad de integrar los componentes web en un entorno real para poder determinar su calidad. Debido a que la calidad está determinada por los usuarios que consumen los componentes, se ha de contar con su opinión en la cuantificación de la misma.---ABSTRACT---Recently, the web has evolved to the collaboration between professional developers and end users with limited knowledge to create web content. Although both solutions are correct and functional, the differences in the quality between them can be appreciable. This feature is shown clearly when the web components are analyzed. The work is composed of the development of a virtual environment which is able to pick the quality measures of the components, based on the interaction between these components and the user. The measures are the starting point to decide the quality, and improve them with the rated measures. The measures selection is done through a study of the main features of a component. This selection can be analyzed. In order to create the website, a prototype has been specified to provide a system in which the components can be trade information between them. The interconnection model has been integrated in the components to evaluate. A dashboard has been developed to allow users interacting with the components without rules, making them possible connecting components through the model. The main conclusion of the work is the necessity of integrating web components in a real environment to decide their quality. Due to the fact that the quality is measured in terms of the rate of the users, it is a must to give them the main roles in the establishment of that quality.

Gust wind tunnel study on ballast pick-up by high-speed trains

This paper describes the experimental setup, procedure, and results obtained, concerning the dynamics of a body lying on a floor, attached to a hinge, and exposed to an unsteady flow, which is a model of the initiation of rotational motion of ballast stones due to the wind generated by the passing of a high-speed train. The idea is to obtain experimental data to support the theoretical model developed in Sanz-Andres and Navarro-Medina (J Wind Eng Ind Aerodyn 98, 772–783, (2010), aimed at analyzing the initial phase of the ballast train-induced-wind erosion (BATIWE) phenomenon. The experimental setup is based on an open circuit, closed test section, low-speed wind tunnel, with a new sinusoidal gust generator mechanism concept, designed and built at the IDR/UPM. The tunnel’s main characteristic is the ability to generate a flow with a uniform velocity profile and sinusoidal time fluctuation of the speed. Experimental results and theoretical model predictions are in good agreement.

Mejoras y extensiones en el Front-End de un modelo de predicción de acciones de un estudiante en un laboratorio virtual 3D

Este documento presenta las mejoras y las extensiones introducidas en la herramienta de visualización del modelo predictivo del comportamiento del estudiante o Student Behavior Predictor Viewer (SBPV), implementada en un trabajo anterior. El modelo predictivo del comportamiento del estudiante es parte de un sistema inteligente de tutoría, y se construye a partir de los registros de actividad de los estudiantes en un laboratorio virtual 3D, como el Laboratorio Virtual de Biotecnología Agroforestal, implementado en un trabajo anterior, y cuyos registros de actividad de los estudiantes se han utilizado para validar este trabajo fin de grado. El SBPV es una herramienta para visualizar una representación gráfica 2D del grafo extendido asociado con cualquiera de los clusters del modelo predictivo del estudiante. Además de la visualización del grafo extendido, el SBPV controla la navegación a través del grafo por medio del navegador web. Más concretamente, el SBPV permite al usuario moverse a través del grafo, ampliar o reducir el zoom del gráfico o buscar un determinado estado. Además, el SBPV también permite al usuario modificar el diseño predeterminado del grafo en la pantalla al cambiar la posición de los estados con el ratón. Como parte de este trabajo fin de grado, se han corregido errores existentes en la versión anterior y se han introducido una serie de mejoras en el rendimiento y la usabilidad. En este sentido, se han implementado nuevas funcionalidades, tales como la visualización del modelo de comportamiento de cada estudiante individualmente o la posibilidad de elegir el método de clustering para crear el modelo predictivo del estudiante; así como ha sido necesario rediseñar la interfaz de usuario cambiando el tipo de estructuras gráficas con que se muestran los elementos del modelo y mejorando la visualización del grafo al interaccionar el usuario con él. Todas estas mejoras se explican detenidamente en el presente documento.---ABSTRACT---This document presents the improvements and extensions made to the visualization tool Student Behavior Predictor Viewer (SBPV), implemented in a previous job. The student behavior predictive model is part of an intelligent tutoring system, and is built from the records of students activity in a 3D virtual laboratory, like the “Virtual Laboratory of Agroforestry Biotechnology” implemented in a previous work, and whose records of students activity have been used to validate this final degree work. The SBPV is a tool for visualizing a 2D graphical representation of the extended graph associated with any of the clusters of the student predictive model. Apart from visualizing the extended graph, the SBPV supports the navigation across the graph by means of desktop devices. More precisely, the SBPV allows user to move through the graph, to zoom in/out the graphic or to locate a given state. In addition, the SBPV also allows user to modify the default layout of the graph on the screen by changing the position of the states by means of the mouse. As part of this work, some bugs of the previous version have been fixed and some enhancements have been implemented to improve the performance and the usability. In this sense, we have implemented new features, such as the display of the model behavior of only one student or the possibility of selecting the clustering method to create the student predictive model; as well as it was necessary to redesign the user interface changing the type of graphic structures that show model elements and improving the rendering of the graph when the user interacts with it. All these improvements are explained in detail in the next sections.

Reduction of front-metallization grid shading in concentrator cells through laser micro-grooved cover glass

Concentrator solar cell front-grid metallizations are designed so that the trade-off between series resistance and shading factor (SF) is optimized for a particular irradiance. High concentrator photovoltaics (CPV) typically requires a metallic electrode pattern that covers up to 10% of the cell surface. The shading effect produced by this front electrode results in a significant reduction in short-circuit current (I SC) and hence, in a significant efficiency loss. In this work we present a cover glass (originally meant to protect the cell surface) that is laser-grooved with a micrometric pattern that redirects the incident solar light towards interfinger regions and away from the metallic electrodes, where they would be wasted in terms of photovoltaic generation. Quantum efficiency (QE) and current (I)-voltage (V) characterization under concentration validate the proof-of-concept, showing great potential for CPV applications