On the Geometrically Dependent Quasi-Saturation and g(m) Reduction in Advanced DeMOS Transistors

This paper reveals an early quasi-saturation (QS) effect attributed to the geometrical parameters in shallow trench isolation-type drain-extended MOS (STI-DeMOS) transistors in advanced CMOS technologies. The quasi-saturation effect leads to serious g(m) reduction in STI-DeMOS. This paper investigates the nonlinear resistive behavior of the drain-extended region and its impact on the particular behavior of the STI-DeMOS transistor. In difference to vertical DMOS or lateral DMOS structures, STI-DeMOS exhibits three distinct regions of the drain extension. A complete understanding of the physics in these regions and their impact on the QS behavior are developed in this paper. An optimization strategy is shown for an improved g(m) device in a state-of-the-art 28-nm CMOS technology node.

Evaluation and Minimization of Low-Order Harmonic Torque in Low-Switching-Frequency Inverter-Fed Induction Motor Drives

A low-order harmonic pulsating torque is a major concern in high-power drives, high-speed drives, and motor drives operating in an overmodulation region. This paper attempts to minimize the low-order harmonic torques in induction motor drives, operated at a low pulse number (i.e., a low ratio of switching frequency to fundamental frequency), through a frequency domain (FD) approach as well as a synchronous reference frame (SRF) based approach. This paper first investigates FD-based approximate elimination of harmonic torque as suggested by classical works. This is then extended into a procedure for minimization of low-order pulsating torque components in the FD, which is independent of machine parameters and mechanical load. Furthermore, an SRF-based optimal pulse width modulation (PWM) method is proposed to minimize the low-order harmonic torques, considering the motor parameters and load torque. The two optimal methods are evaluated and compared with sine-triangle (ST) PWM and selective harmonic elimination (SHE) PWM through simulations and experimental studies on a 3.7-kW induction motor drive. The SRF-based optimal PWM results in marginally better performance than the FD-based one. However, the selection of optimal switching angle for any modulation index (M) takes much longer in case of SRF than in case of the FD-based approach. The FD-based optimal solutions can be used as good starting solutions and/or to reasonably restrict the search space for optimal solutions in the SRF-based approach. Both of the FD-based and SRF-based optimal PWM methods reduce the low-order pulsating torque significantly, compared to ST PWM and SHE PWM, as shown by the simulation and experimental results.

Time-Frequency Analysis of Nonlinear Systems: The Skeleton Linear Model and the Skeleton Curves

The joint time-frequency analysis method is adopted to study the nonlinear behavior varying with the instantaneous response for a class of S.D.O.F nonlinear system. A time-frequency masking operator, together with the conception of effective time-frequency region of the asymptotic signal are defined here. Based on these mathematical foundations, a so-called skeleton linear model (SLM) is constructed which has similar nonlinear characteristics with the nonlinear system. Two skeleton curves are deduced which can indicate the stiffness and damping in the nonlinear system. The relationship between the SLM and the nonlinear system, both parameters and solutions, is clarified. Based on this work a new identification technique of nonlinear systems using the nonstationary vibration data will be proposed through time-frequency filtering technique and wavelet transform in the following paper.

Toughness Of Ni/Al2O3 Interfaces As Dependent On Micron-Scale Plasticity And Atomistic-Scale Separation

Ceramic/metal interfaces were studied that fail by atomistic separation accompanied by plastic dissipation in the metal. The macroscopic toughness of the specific Ni alloy/Al2O3 interface considered is typically on the order of ten times the atomistic work of separation in mode I and even higher if combinations of mode I and mode II act on the interface. Inputs to the computational model of interface toughness are: (i) strain gradient plasticity applied to the Ni alloy with a length parameter determined by an indentation test, and (ii) a potential characterizing mixed mode separation of the interface fit to atomistic results. The roles of the several length parameters in the strain gradient plasticity are determined for indentation and crack growth. One of the parameters is shown to be of dominant importance, thus establishing that indentation can be used to measure the relevant length parameter. Recent results for separation of Ni/Al2O3 interfaces computed by atomistic methods are reviewed, including a set of results computed for mixed mode separation. An approximate potential fit to these results is characterized by the work of separation, the peak separation stress for normal separation and the traction-displacement relation in pure shearing of the interface. With these inputs, the model for steady-state crack growth is used to compute the toughness of the interface under mode I and under the full range of mode mix. The effect of interface strength and the work of separation on macroscopic toughness is computed. Fundamental implications for plasticity-enhanced toughness emerge.

Determination Ofinterfacial Mechanical Parameters For An Al/Epoxy/Al2O3 System Byusing Peel Test Simulations

Peel test measurements and simulations of the interfacial mechanical parameters for the Al/Epoxy/Al2O3 system are performed in the present investigation. A series of Al film thicknesses between 20 and 250 microns and three peel angles of 90, 135 and 180 degrees are considered. Two types of epoxy adhesives are adopted to obtain both strong and weak interface adhesions. A finite element model with cohesive zone elements is used to identify the interfacial parameters and simulate the peel test process. By simulating and recording normal stress near the crack tip, the separation strength is obtained. Furthermore, the cohesive energy is identified by comparing the simulated steady-state peel force and the experimental result. It is found from the research that both the cohesive energy and the separation strength can be taken as the intrinsic interfacial parameters which are dependent on the thickness of the adhesive layer and independent of the film thickness and peel angle.

Floating zone convection

The microgravity research, as a branch of the advanced sciences and a spe- cialized field of high technology, has been made in China since the late 1980's. The research group investigating microgravity fluid physics consisted of our col- leagues and the authors in the Institute of Mechanics of the Chinese Academy of Sciences (CAS), and we pay special attention to the floating zone convection as our first research priority. Now, the research group has expanded and is a part of the National Microgravity Laboratory of the CAS, and the research fields have been extended to include more subjects related to microgravity science. Howev- er, the floating zone convection is still an important topic that greatly holds our research interests.

An increment technique for estimating growth parameters of tropical tunas, as applied to yellowfin tuna (Thunnus albacares)

ENGLISH: The rate of growth of tropical tunas has been studied by various investigators using diverse methods. Hayashi (1957) examined methods to determine the age of tunas by interpreting growth patterns on the bony or hard parts, but the results proved unreliable. Moore (1951), Hennemuth (1961), and Davidoff (1963) studied the age and growth of yellowfin tuna by the analysis of size frequency distributions. Schaefer, Chatwin and Broadhead (1961), and Fink (ms.), estimated the rate of growth of yellowfin tuna from tagging data; their estimates gave a somewhat slower rate of growth than that obtained by the study of length-frequency distributions. For the yellowfin tuna, modal groups representing age groups can be identified and followed for relatively long periods of time in length-frequency graphs. This may not be possible, however, for other tropical tunas where the modal groups may not represent identifiable age groups; this appears to be the case for skipjack tuna (Schaefer, 1962). It is necessary, therefore, to devise a method of estimating the growth rates of such species without identifying the year classes. The technique described in this study, hereafter called the "increment technique", employs the measurement of the change in length per unit of time, with respect to mean body length, without the identification of year classes. This technique is applied here as a method of estimating the growth rate of yellowfin tuna from the entire Eastern Tropical Pacific, and from the Commission's northern statistical areas (Areas 01-04 and 08) as shown in Figure 1. The growth rates of yellowfin tuna from Area 02 (Hennemuth, 1961) and from the northern areas (Davidoff, 1963) have been described by the technique of tracing modal progressions of year classes, hereafter termed the "year class technique". The growth rate analyses performed by both techniques apply to the segment of the population which is captured by tuna fishing vessels. The results obtained by both methods are compared in this report. SPANISH: La tasa del crecimiento de los atunes tropicales ha sido estudiada por varios investigadores quienes usaron diversos métodos. Hayashi (1957) examinó los métodos para determinar la edad de los atunes interpretando las marcas del crecimiento de las partes óseas o duras, pero los resultados no han demostrado eficacia. Moore (1951), Hennemuth (1961) y Davidoff (1963) estudiaron la edad y el crecimiento del atún aleta amarilla por medio del análisis de las distribuciones de la frecuencia de tamaños. Schaefer, Chatwin y Broadhead (1961) y Fink (Ms.), estimaron la tasa del crecimiento del atún aleta amarilla valiéndose de los datos de la marcación de los peces; ambos estimaron una tasa del crecimiento algo más lenta que la que se obtiene mediante el estudio de las distribuciones de la frecuencia de longitudes. Para el atún aleta amarilla, los grupos modales que representan grupos de edad pueden ser identificados y seguidos durante períodos de tiempo relativamente largos en los gráficos de la frecuencia de longitudes. Sin embargo, ésto puede no ser posible para otros atunes tropicales para los cuales los grupos modales posiblemente no representan grupos de edad identificables; este parece ser el caso para el barrilete (Schaefer, 1962). Consecuentemente, es necesario idear un método para estimar las tasas del crecimiento de las mencionadas especies sin necesidad de identificar las clases anuales. La técnica descrita en este estudio, en adelante llamada la "técnica incremental", emplea la medida del cambio en la longitud por unidad de tiempo, con respecto al promedio de la longitud corporal, sin tener que identificar las clases anuales. Esta técnica se aplica aquí como un método para estimar la tasa del crecimiento del atún aleta amarilla de todo el Pacífico Oriental Tropical, y de las áreas estadísticas norteñas de la Comisión (Areas 01-04 y 08), como se muestra en la Figura 1. Las tasas del crecimiento del atún aleta amarilla del Area 02 (Hennemuth, 1961) y de las áreas del norte (Davidoff, 1963), han sido descritas por medio de una técnica que consiste en delinear las progresiones modales de las clases anuales, en adelante llamada la "técnica de la clase anual". Los análisis de la tasa del crecimiento llevados a cabo por ambas técnicas se refieren al segmento de la población capturada por embarcaciones pesqueras de atún. Los resultados obtenidos por ambos métodos se comparan en este informe.

Catch-per-unit-effort and biological parameters from the Massachusetts coastal lobster (Homarus americanus) resource: Description and trends

Acomprehensive description of the Massachusetts coastal lobster (Homarus americanus) resou,rce was obtained by sampling commercial catches coastwide at sea and at dealerships between 1981 and 1986. Acommercial lobster sea-sampling program, wherein six coastal regions were sampled monthly, with an areal and temporal data weighting design, was the primary source of data. An improved index of catch per trap haul/set-over-day was generated by modeling the relationship between catch and immersion time and standardizing effort. This 6-year time-series of mean annual catch rates tracked closely the landings trend for territorial waters. During the study period there was a gradual increase in indices of exploitation and total annual mortality which corresponded to a gradual decline in mean carapace length of marketable lobster. The frequency of culls escalated from 10.0% in 1981 to 20.9% in 1986, while the percentage of lobster found dead in traps was consistently less than 1%. The sex ratio (%F:%M) was significantly different from 50:50 and approximated a 60:40 relationship during the study period. Male and female weight-length relationships were significantly different. Females weighed more than males at smaller sizes and less than males at larger sizes. A north-south clinal trend was evident wherein lobster north of Cape Cod weighed less at length than those from regions south of Cape Cod. Functional size-maturity relationships were developed for female lobster by staging cement gland development. Proportions mature at size represent more realistic values than those obtained by analyses of percent of females ovigerous. Regional variation occurred in most of the parameters studied. Three lobster groups, differing in major population descriptors, are defined by our data.(PDF file contains 28 pages.)

Design, analysis and implementation of a versatile low level radio frequency system for accelerating cavities

179 p.

Applications of frequency modulation interference cancellers to multiaccess communications systems

Cancellation of interfering frequency-modulated (FM) signals is investigated with emphasis towards applications on the cellular telephone channel as an important example of a multiple access communications system. In order to fairly evaluate analog FM multiaccess systems with respect to more complex digital multiaccess systems, a serious attempt to mitigate interference in the FM systems must be made. Information-theoretic results in the field of interference channels are shown to motivate the estimation and subtraction of undesired interfering signals. This thesis briefly examines the relative optimality of the current FM techniques in known interference channels, before pursuing the estimation and subtracting of interfering FM signals.

The capture-effect phenomenon of FM reception is exploited to produce simple interference-cancelling receivers with a cross-coupled topology. The use of phase-locked loop receivers cross-coupled with amplitude-tracking loops to estimate the FM signals is explored. The theory and function of these cross-coupled phase-locked loop (CCPLL) interference cancellers are examined. New interference cancellers inspired by optimal estimation and the CCPLL topology are developed, resulting in simpler receivers than those in prior art. Signal acquisition and capture effects in these complex dynamical systems are explained using the relationship of the dynamical systems to adaptive noise cancellers.

FM interference-cancelling receivers are considered for increasing the frequency reuse in a cellular telephone system. Interference mitigation in the cellular environment is seen to require tracking of the desired signal during time intervals when it is not the strongest signal present. Use of interference cancelling in conjunction with dynamic frequency-allocation algorithms is viewed as a way of improving spectrum efficiency. Performance of interference cancellers indicates possibilities for greatly increased frequency reuse. The economics of receiver improvements in the cellular system is considered, including both the mobile subscriber equipment and the provider's tower (base station) equipment.

The thesis is divided into four major parts and a summary: the introduction, motivations for the use of interference cancellation, examination of the CCPLL interference canceller, and applications to the cellular channel. The parts are dependent on each other and are meant to be read as a whole.

Fast growing mode of stimulated Raman scattering in a pure three-wave process

Stimulated Raman scattering (SRS) of a relativistic laser in plasmas is studied in the framework of the standard equation set of a three-wave process. As far as every wave involved in the process is concerned, its evolution has two aspects: time-dependent amplitude and time-dependent frequency. These two aspects affect each other. Strict analysis and numerical experiment on the full three-wave equation set reveal that a fast growing mode of the instability, which could reach a balance or saturation point during a period far shorter than an estimation based on conventional analysis, could take place in a standard three-wave process without coupling with a fourth wave. This fast growing mode is found to stem from the constraint set by the background density on the amplitude of the driven Langmuir wave. The effect of various parameters on the development of the SRS instability is studied by numerical calculation of the history of the instability in different cases. (c) 2007 American Institute of Physics.

Análise das alterações decorrentes do envelhecimento na mecânica respiratória pela técnica de oscilações forçadas

O crescimento do percentual de idosos na população ocorre mundialmente tornando necessário conhecer o impacto do processo de envelhecimento, neste contexto, do sistema respiratório. O desconhecimento do impacto do envelhecimento associado a diferentes graus de exposição a poluentes e a presença de comorbidade(s) dificulta a diagnose das pneumopatias acarretando aos idosos piora da qualidade de vida. São vantagens da Técnica de Oscilações Forçadas (FOT): alto potencial de aplicação em idosos, fácil realização, análise detalhada da mecânica respiratória, desempenho de papel complementar, bem como de alternativa na impossibilidade de realização dos exames tradicionais. Foi realizado um estudo experimental comparativo que objetivou investigar o impacto do envelhecimento no sistema respiratório pela FOT e pela espirometria entre grupos de diferentes faixas etárias, sendo a idade a variável independente e as variáveis dependentes, os parâmetros oscilométricos resistência em regime contínuo (R0) e das vias aéreas centrais (Rm), inclinação da resistência (S), frequência de ressonância (fr), reatância média (Xm), complacência dinâmica (Cdin,sr) e os parâmetros espirométricos (VEF1, CVF, VEF1/CVF e FEF/CVF). Foram realizados entrevista, exame clínico, radiografia torácica, avaliação da mecânica respiratória pela FOT e da função pulmonar pela espirometria. 255 indivíduos com idades entre 20 e 86 anos foram entrevistados. Destes, 175 foram excluídos, restando os 80 voluntários analisados, que foram divididos em 6 grupos de acordo com a faixa etária (A: 20 a 29 anos; B: 30 a 39 anos; C: 40 a 49 anos; D: 50 a 59 anos; E: 60 a 69 anos; F: 70 anos ou mais). Foram utilizados os testes de Shapiro-Wilkins, na avaliação da normalidade dos dados biométricos em cada grupo, Oneway ANOVA, na comparação entre os grupos, e Tukey HSD na comparação entre as classes subjacentes. A análise da associação entre duas variáveis foi realizada inicialmente pela regressão univariada entre os parâmetros oscilométricos, a idade e a altura. A regressão múltipla entre os parâmetros oscilométricos, idade e altura foi realizada em conjunto. Foi realizada a análise de confundimento ou modificação de efeito sobre o parâmetro altura na relação entre a idade e os parâmetros oscilométricos. A correção pelo fator altura foi realizada quando sua análise apresentava fator de confundimento. Quanto aos parâmetros resistivos, não foram observadas alterações em R0 e Rm com o envelhecimento enquanto que o declínio observado em S é discreto e não-significativo. Em relação aos parâmetros reativos, verificouse que Cdin,sr e Xm diminuem enquanto que fr aumenta com o processo de envelhecimento. Todas estas alterações são significativas. Todavia, a diminuição da Cdin,sr não apresenta relação com a idade e sim com a altura, que constituiu modificação do efeito. Nos demais parâmetros oscilométricos, a altura constituiu fator de confundimento. Quanto à espirometria, observou-se declínio significativo do VEF1, do VEF1/CVF e da CVF. O índice FEF/CVF apresentou declínio nãosignificativo. Concluindo, a resistência do sistema respiratório e a complacência dinâmica não se modificam enquanto a homogeneidade do sistema respiratório diminui com o processo de envelhecimento.

A study of a new electromechanical energy conversion process using superconducting frequency modulated resonators

Experimental demonstrations and theoretical analyses of a new electromechanical energy conversion process which is made feasible only by the unique properties of superconductors are presented in this dissertation. This energy conversion process is characterized by a highly efficient direct energy transformation from microwave energy into mechanical energy or vice versa and can be achieved at high power level. It is an application of a well established physical principle known as the adiabatic theorem (Boltzmann-Ehrenfest theorem) and in this case time dependent superconducting boundaries provide the necessary interface between the microwave energy on one hand and the mechanical work on the other. The mechanism which brings about the conversion is another known phenomenon - the Doppler effect. The resonant frequency of a superconducting resonator undergoes continuous infinitesimal shifts when the resonator boundaries are adiabatically changed in time by an external mechanical mechanism. These small frequency shifts can accumulate coherently over an extended period of time to produce a macroscopic shift when the resonator remains resonantly excited throughout this process. In addition, the electromagnetic energy in s ide the resonator which is proportional to the oscillation frequency is al so accordingly changed so that a direct conversion between electromagnetic and mechanical energies takes place. The intrinsically high efficiency of this process is due to the electromechanical interactions involved in the conversion rather than a process of thermodynamic nature and therefore is not limited by the thermodynamic value.

A highly reentrant superconducting resonator resonating in the range of 90 to 160 MHz was used for demonstrating this new conversion technique. The resonant frequency was mechanically modulated at a rate of two kilohertz. Experimental results showed that the time evolution of the electromagnetic energy inside this frequency modulated (FM) superconducting resonator indeed behaved as predicted and thus demonstrated the unique features of this process. A proposed usage of FM superconducting resonators as electromechanical energy conversion devices is given along with some practical design considerations. This device seems to be very promising in producing high power (~10W/cm^3) microwave energy at 10 - 30 GHz.

Weakly coupled FM resonator system is also analytically studied for its potential applications. This system shows an interesting switching characteristic with which the spatial distribution of microwave energies can be manipulated by external means. It was found that if the modulation was properly applied, a high degree (>95%) of unidirectional energy transfer from one resonator to the other could be accomplished. Applications of this characteristic to fabricate high efficiency energy switching devices and high power microwave pulse generators are also found feasible with present superconducting technology.

Phase variations and phase shift in a TE011 mode microwave cavity used for in a miniature Rb fountain frequency standard

It is the first time in China that the phase variations and phase shift of microwave cavity in a miniature Rb fountain frequency standard are studied, considering the effect of imperfect metallic walls. Wall losses in the microwave cavity lead to small traveling wave components that deliver power from the cavity feed to the walls of cavity. The small traveling wave components produce a microradian distribution of phase throughout the cavity ity, and therefore distributed cavity phase shifts need to be considered. The microwave cavity is a TE011 circular cylinder copper cavity, with round cut-hole of end plates (14mm in diameter) for access for the atomic flux and two small apertures in the center of the side wall for coupling in microwave power. After attenuation alpha is calculated, field variations in cavity are solved. The field variations of the cavity are given. At the same time, the influences of loaded quality factor QL and diameter/height (2a/d) of the microwave cavity on the phase variations and phase shift are considered. According to the phase variation and phase shift of microwave cavity we select the parameters of cavity, diameter 2a = 69.2mm, height d = 34.6mm, QL = 5000, which will result in an uncertainty delta(Delta f / f0 ) < 4.7 x 10(-17) and meets the requirement for the miniature Rb fountain frequency standard with accuracy 10(-15).

Response of linear, viscous damped systems to excitations having time-varying frequency

The response of linear, viscous damped systems to excitations having time-varying frequency is the subject of exact and approximate analyses, which are supplemented by an analog computer study of single degree of freedom system response to excitations having frequencies depending linearly and exponentially on time.

The technique of small perturbations and the methods of stationary phase and saddle-point integration, as well as a novel bounding procedure, are utilized to derive approximate expressions characterizing the system response envelope—particularly near resonances—for the general time-varying excitation frequency.

Descriptive measurements of system resonant behavior recorded during the course of the analog study—maximum response, excitation frequency at which maximum response occurs, and the width of the response peak at the half-power level—are investigated to determine dependence upon natural frequency, damping, and the functional form of the excitation frequency.

The laboratory problem of determining the properties of a physical system from records of its response to excitations of this class is considered, and the transient phenomenon known as “ringing” is treated briefly.

It is shown that system resonant behavior, as portrayed by the above measurements and expressions, is relatively insensitive to the specifics of the excitation frequency-time relation and may be described to good order in terms of parameters combining system properties with the time derivative of excitation frequency evaluated at resonance.

One of these parameters is shown useful for predicting whether or not a given excitation having a time-varying frequency will produce strong or subtle changes in the response envelope of a given system relative to the steady-state response envelope. The parameter is shown, additionally, to be useful for predicting whether or not a particular response record will exhibit the “ringing” phenomenon.