Explosion of smoothness from a point to everywhere for conjugacies between diffeomorphisms on surfaces

For diffeomorphisms on surfaces with basic sets, we show the following type of rigidity result: if a topological conjugacy between them is differentiable at a point in the basic set then the conjugacy has a smooth extension to the surface. These results generalize the similar ones of D. Sullivan, E. de Faria and ours for one-dimensional expanding dynamics.

Global and Partitioned Multiprocessor Fixed Priority Scheduling with Deferred Pre-emption

This article introduces schedulability analysis for global fixed priority scheduling with deferred preemption (gFPDS) for homogeneous multiprocessor systems. gFPDS is a superset of global fixed priority pre-emptive scheduling (gFPPS) and global fixed priority non-pre-emptive scheduling (gFPNS). We show how schedulability can be improved using gFPDS via appropriate choice of priority assignment and final non-pre-emptive region lengths, and provide algorithms which optimize schedulability in this way. Via an experimental evaluation we compare the performance of multiprocessor scheduling using global approaches: gFPDS, gFPPS, and gFPNS, and also partitioned approaches employing FPDS, FPPS, and FPNS on each processor.

A biomimetic sensor for monitoring oxidative stress biomarker in point-of-care

1st ASPIC International Congress

Protein-responsive polymers for point-of-care detection of cardiac biomarker

This work describes a novel use for the polymeric film, poly(o-aminophenol) (PAP) that was made responsive to a specific protein. This was achieved through templated electropolymerization of aminophenol (AP) in the presence of protein. The procedure involved adsorbing protein on the electrode surface and thereafter electroploymerizing the aminophenol. Proteins embedded at the outer surface of the polymeric film were digested by proteinase K and then washed away thereby creating vacant sites. The capacity of the template film to specifically rebind protein was tested with myoglobin (Myo), a cardiac biomarker for ischemia. The films acted as biomimetic artificial antibodies and were produced on a gold (Au) screen printed electrode (SPE), as a step towards disposable sensors to enable point-of-care applications. Raman spectroscopy was used to follow the surface modification of the Au-SPE. The ability of the material to rebind Myo was measured by electrochemical techniques, namely electrochemical impedance spectroscopy (EIS) and square wave voltammetry (SWV). The devices displayed linear responses to Myo in EIS and SWV assays down to 4.0 and 3.5 μg/mL, respectively, with detection limits of 1.5 and 0.8 μg/mL. Good selectivity was observed in the presence of troponin T (TnT) and creatine kinase (CKMB) in SWV assays, and accurate results were obtained in applications to spiked serum. The sensor described in this work is a potential tool for screening Myo in point-of-care due to the simplicity of fabrication, disposability, short time response, low cost, good sensitivity and selectivity.

Novel biosensing device for point-of-care applications with plastic antibodies grown on Au-Screen Printed Electrodes

A gold screen printed electrode (Au-SPE) was modified by merging Molecular Imprinting and Self-Assembly Monolayer techniques for fast screening cardiac biomarkers in point-of-care (POC). For this purpose, Myoglobin (Myo) was selected as target analyte and its plastic antibody imprinted over a glutaraldehyde (Glu)/cysteamine (Cys) layer on the gold-surface. The imprinting effect was produced by growing a reticulated polymer of acrylamide (AAM) and N,N′-methylenebisacrylamide (NNMBA) around the Myo template, covalently attached to the biosensing surface. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) studies were carried out in all chemical modification steps to confirm the surface changes in the Au-SPE. The analytical features of the resulting biosensor were studied by different electrochemical techniques, including EIS, square wave voltammetry (SWV) and potentiometry. The limits of detection ranged from 0.13 to 8 μg/mL. Only potentiometry assays showed limits of detection including the cut-off Myo levels. Quantitative information was also produced for Myo concentrations ≥0.2 μg/mL. The linear response of the biosensing device showed an anionic slope of ~70 mV per decade molar concentration up to 0.3 μg/mL. The interference of coexisting species was tested and good selectivity was observed. The biosensor was successfully applied to biological fluids.

Timing Analysis of Fixed Priority SelfSuspending Sporadic Tasks

27th Euromicro Conference on Real-Time Systems (ECRTS 2015), Lund, Sweden.

Forest fire detection with a small fixed wing autonomous aerial vehicle

In this work a forest fire detection solution using small autonomous aerial vehicles is proposed. The FALCOS unmanned aerial vehicle developed for remote-monitoring purposes is described. This is a small size UAV with onboard vision processing and autonomous flight capabilities. A set of custom developed navigation sensors was developed for the vehicle. Fire detection is performed through the use of low cost digital cameras and near-infrared sensors. Test results for navigation and ignition detection in real scenario are presented.

Per-unit royalty and fixed-fee licensing in a differentiated Stackelberg model

In the present paper we consider a differentiated Stackelberg model, when the leader firm engages in an R&D process that gives an endogenous cost-reducing innovation. The aim is to study the licensing of the cost-reduction by a per-unit royalty and a fixed-fee. We analyse the implications of these types of licensing contracts over the R&D effort, the profits of the firms, the consumer surplus and the social welfare. By using comparative static analysis, we conclude that the degree of the differentiation of the goods plays an important role in the results.

Response Time Analysis for Fixed-Priority Tasks with Multiple Probabilistic Parameters

Demo presented in 12th Workshop on Models and Algorithms for Planning and Scheduling Problems (MAPSP 2015). 8 to 12, Jun, 2015. La Roche-en-Ardenne, Belgium. Extended abstract.

Detection of parvovirus B19 infection in formalin-fixed and paraffin-embedded placenta and fetal tissues

Parvovirus B19 infection was first discovered in 1975 and it is implicated in fetal death from hydrops fetalis the world over. Diagnosis is usually made through histological identification of the intranuclear inclusion in placenta and fetal organs. However, these cells may be scarce or uncharacteristic, making definitive diagnosis difficult. We analyzed histologically placentas and fetal organs from 34 cases of non-immune hydrops fetalis, stained with Hematoxylin and Eosin (HE) and submitted to immunohistochemistry and polymerase chain reaction (PCR). Of 34 tissue samples, two (5.9%) presented typical intranuclear inclusion in circulating normoblasts seen in Hematoxylin and Eosin stained sections, confirmed by immunohistochemistry and PCR. However, PCR of fetal organs was negative in one case in which the placenta PCR was positive. We concluded that parvovirus B19 infection frequency is similar to the literature and that immunohistochemistry was the best detection method. It is highly specific and sensitive, preserves the morphology and reveals a larger number of positive cells than does HE with the advantage of showing cytoplasmic and nuclear positivity, making it more reliable. Although PCR is more specific and sensitive in fresh or ideally fixed material it is not so in formalin-fixed paraffin-embedded tissues, frequently the only one available in such cases.

Effects of tissue handling and processing steps on PCR for detection of Mycobacterium tuberculosis in formalin-fixed paraffin-embedded samples

Development and standardization of reliable methods for detection of Mycobacterium tuberculosis in clinical samples is an important goal in laboratories throughout the world. In this work, lung and spleen fragments from a patient who died with the diagnosis of miliary tuberculosis were used to evaluate the influence of the type of fixative as well as the fixation and paraffin inclusion protocols on PCR performance in paraffin embedded specimens. Tissue fragments were fixed for four h to 48 h, using either 10% non-buffered or 10% buffered formalin, and embedded in pure paraffin or paraffin mixed with bee wax. Specimens were submitted to PCR for amplification of the human beta-actin gene and separately for amplification of the insertion sequence IS6110, specific from the M. tuberculosis complex. Amplification of the beta-actin gene was positive in all samples. No amplicons were generated by PCR-IS6110 when lung tissue fragments were fixed using 10% non-buffered formalin and were embedded in paraffin containing bee wax. In conclusion, combined inhibitory factors interfere in the detection of M. tuberculosis in stored material. It is important to control these inhibitory factors in order to implement molecular diagnosis in pathology laboratories.

Longitudinal analysis of tumor marker CEA of breast cancer patients from Braga's hospital

Allied to an epidemiological study of population of the Senology Unit of Braga’s Hospital that have been diagnosed with malignant breast cancer, we describe the progression in time of repeated measurements of tumor marker Carcinoembryonic antigen (CEA). Our main purpose is to describe the progression of this tumor marker as a function of possible risk factors and, hence, to understand how these risk factors influences that progression. The response variable, values of CEA, was analyzed making use of longitudinal models, testing for different correlation structures. The same covariates used in a previous survival analysis were considered in the longitudinal model. The reference time used was time from diagnose until death from breast cancer. For diagnostic of the models fitted we have used empirical and theoretical variograms. To evaluate the fixed term of the longitudinal model we have tested for a changing point on the effect of time on the tumor marker progression. A longitudinal model was also fitted only to the subset of patients that died from breast cancer, using the reference time as time from date of death until blood test.

Exportação e impacto nos resultados: o caso de um grupo de empresas portuguesas

Com a crescente preocupação em dinamizar as exportações e potenciar os seus efeitos na economia, muitos trabalhos têm tentado encontrar fatores potenciadores do sucesso das empresas no mercado internacional (dimensão, produtividade pré exportadora, idade, fase do ciclo de produção, relacionamento prévio com o exterior, etc.). Temas como a seleção natural do mercado e a aprendizagem pela exportação, são transversais e incontornáveis nos trabalhos empíricos que abordam o estudo das exportações ao nível das empresas. No entanto, não nos devemos esquecer que uma das principais motivações das empresas, é a maximização do lucro. Com efeito, uma nova onda de trabalhos tem-se voltado para a o impacto que as exportações têm sobre a rentabilidade das empresas. Utilizando um modelo de efeitos fixos com dados em painel, aplicado a uma base de dados de empresas portuguesas, com espetro temporal entre 2008 e 2012, este trabalho encontra evidências e que as exportações são um fraco potenciador da rentabilidade das empresas. Do ponto de vista da organização do presente trabalho, no primeiro capítulo será apresentada uma breve revisão de literatura enquadradora do tema; no segundo capítulo será apresentada a base de dados, tratamento e a abordagem econométrica; por último será apresentada uma conclusão, com os resultados principais do trabalho e com algumas questões que poderão ser abordadas no futuro.

Spatial point pattern analysis of gorilla nest sites in the Kagwene Sanctuary, Cameroon: Towards understanding the nesting behavior of a critically endangered subspecies

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.