Desenvolvimento de um aditivo natural à base de catequina: otimização da extração e estabilização a partir de frutos de Arbutus unedo L.

The common Mediterranean ornamental strawberry-tree (Arbutus unedo L.) produces an edible reddish sweet berry that is found to be bland and tasteless unless it is consumed overripe, otherwise it is discarded or used as basic agricultural sub residue. The bioactive properties of this fruit have been reported and related with phenolic compounds, mainly flavan-3-ols, such as catechin and procyanidins, which has opened the opportunity to exploit their extraction from alternative sources.The common Mediterranean ornamental strawberry-tree (Arbutus unedo L.) produces an edible reddish sweet berry that is found to be bland and tasteless unless it is consumed overripe, otherwise it is discarded or used as basic agricultural sub residue. The bioactive properties of this fruit have been reported and related with phenolic compounds, mainly flavan-3-ols, such as catechin and procyanidins, which has opened the opportunity to exploit their extraction from alternative sources. This study compares and optimizes the maceration, microwave and ultrasound extraction techniques in the recovery of a catechin extract from Arbutus unedo L. fruits and evaluate the stability of flavan-3-ols during storage and application processes. To obtain conditions that maximize the catechin extraction yield, a response surface methodology was used. Maceration and microwave extractions were found to be the most effective methods, capable of yielding 1.38±0.1 and 1.70±0.3 mg of catechin/g dry weight (dw) in the corresponding optimal extraction conditions. The optimal conditions for maceration were 93.2±3.7 min, 79.6±5.2 ºC and 23.1±3.7 % of ethanol, while for the microwave extraction were 42.2±4.1 min, 137.1±8.1 ºC and 12.1±1.1 % of ethanol. The microwave system was a quicker solution, conducting to slightly higher yields of catechin than maceration, but this one needed lower temperatures to reach similar yields. The ultrasound method was the least effective solution in terms of catechin yield extraction (0.71±0.1 mg/g at 42.4±3.6 min, 314.9±21.2 W and 40.3±3.8 %. ethanol). The stability was tested with of the catechin-enriched extract (60% flavan-3-ols and 22% catechin), obtained under the best maceration conditions, was tested. Therefore, catechin-enriched extracts were submitted to physical and chemical stability studies, considering the main affecting variables (time, temperature and pH): i) a stability study of the extracts during storage as powder system; and ii) a stability study of the extracts in simulated food environment (aqueous solution system). The measured responses were the flavan-3-ols and catechin contents, determined by HPLC-DAD, and the antioxidant activity of the extracts evaluated by hydrophilic assays. Mechanistic and phenomenological equations were used to describe the responses, and the optimal conditions for flavan-3-ols (including catechin) stability as powder extract during a month were pH= 5.4 and T= -20ºC; while its stability in aqueous solution remained during the 24 h of application at pH<4 and T<30ºC. This study compares and optimizes the maceration, microwave and ultrasound extraction techniques in the recovery of a catechin extract from Arbutus unedo L. fruits and evaluate the stability of flavan-3-ols during storage and application processes. To obtain conditions that maximize the catechin extraction yield, a response surface methodology was used. Maceration and microwave extractions were found to be the most effective methods, capable of yielding 1.38±0.1 and 1.70±0.3 mg of catechin/g dry weight (dw) in the corresponding optimal extraction conditions. The optimal conditions for maceration were 93.2±3.7 min, 79.6±5.2 ºC and 23.1±3.7 % of ethanol, while for the microwave extraction were 42.2±4.1 min, 137.1±8.1 ºC and 12.1±1.1 % of ethanol. The microwave system was a quicker solution, conducting to slightly higher yields of catechin than maceration, but this one needed lower temperatures to reach similar yields. The ultrasound method was the least effective solution in terms of catechin yield extraction (0.71±0.1 mg/g at 42.4±3.6 min, 314.9±21.2 W and 40.3±3.8 %. ethanol). The stability was tested with of the catechin-enriched extract (60% flavan-3-ols and 22% catechin), obtained under the best maceration conditions, was tested. Therefore, catechin-enriched extracts were submitted to physical and chemical stability studies, considering the main affecting variables (time, temperature and pH): i) a stability study of the extracts during storage as powder system; and ii) a stability study of the extracts in simulated food environment (aqueous solution system). The measured responses were the flavan-3-ols and catechin contents, determined by HPLC-DAD, and the antioxidant activity of the extracts evaluated by hydrophilic assays. Mechanistic and phenomenological equations were used to describe the responses, and the optimal conditions for flavan-3-ols (including catechin) stability as powder extract during a month were pH= 5.4 and T= -20ºC; while its stability in aqueous solution remained during the 24 h of application at pH<4 and T<30ºC.

Otimização da extração de ergosterol assistida por microondas a partir de Agaricus bisporus L., aplicando a técnica estatística de superfície e resposta combinada com a técnica de HPLC-UV

O aumento de consumo de cogumelos tem-se verificado em todo o mundo, não só pelo seu valor nutricional, sabor apurado e textura, mas também pelas suas propriedades medicinais. Existem vários estudos científicos que descrevem os benefícios do consumo de cogumelos, que advêm da sua riqueza em compostos bioativos, tais como micosteróis, em particular, ergosterol. Agaricus bisporus L. é o cogumelo mais consumido em todo o mundo, sendo a sua fração de esteróis constituída essencialmente por ergosterol (90%) [1], tornando a sua extração um tópico de elevado interesse já que esta molécula apresenta elevado valor comercial e inúmeras aplicações nas indústrias alimentar, farmacêutica e cosmética. Segundo a literatura, o teor de ergosterol pode variar entre 3 e 9 mg por g de cogumelo seco. Atualmente, os métodos tradicionais tais como a maceração e a extração em Soxhlet estão a ser substituídos por metodologias emergentes, nomeadamente a extração assistida por microondas, visando diminuir a quantidade de solvente utilizado e o tempo de extração e, naturalmente, aumentar o rendimento da mesma. No presente trabalho, utilizou-se A. bisporus como fonte de ergosterol, tendo-se otimizado as seguintes variáveis relevantes para a sua extração pela tecnologia de microondas (MAE): tempo (0-20 min), temperatura (60-210 ºC) e razão sólido-líquido (1-20 g/L). O solvente utilizado foi o etanol tendo-se aplicado a técnica estatística de superfície de resposta por forma a gerar modelos matemáticos que permitissem maximizar a resposta e otimizar as variáveis que afetam a extração de ergosterol. O conteúdo em ergosterol foi monitorizado por HPLC-UV. Os resultados demonstraram que a técnica MAE é promissora para a extração de ergosterol, tendo-se obtido, para as condições ótimas (20,4 min, 121,5ºC e 1,6 g/L), 569,4 mg ergosterol/100 g de massa seca, valor similar ao obtido com extração convencional por Soxhlet (671,5±0,5 mg/100 g de massa seca). Em síntese, a extração assistida por microondas demonstrou ser uma tecnologia eficiente para maximizar o rendimento de extração em ergosterol.

Extração, caracterização estrutural parcial e atividades farmacológicas do olginato obtido da alga marrom Lobophora variegata (Lamouroux) Oliveira Filho, 1977

The alginic acid or alginates are acidic polysaccharides found in brown seaweed widely used in food, cosmetic, medical and pharmaceutical industry. This paper proposes the extraction, chemical characterization and verification of the pharmacological activities of brown seaweed variegata Lobophora . The alginate was extracted from the seaweed Lobophora variegata and part was sulphated for comparative purposes. The native extract showed 42% total sugar, 65% uronic acid, 0,36 % protein and 0% of sulfate, while the sulfate showed 39% , 60%, 0.36% and 27,92 % respectively. The presence of a sulfate group may be observed by the metachromasia with toluidine blue in electrophoresis system and characteristic vibration 1262,34 cm-1 in infrared spectroscopy connections assigned to S = O. We observed the formation of films and beads of native alginate, where more concentrated solution 6% resulted in a thicker and more consistent film. Native alginate showed proliferative activity at concentrations (25 and 50 mcg), (50 mg) and (100 mg) in 3T3 cell line in 24h, 48h and 72h, respectively , as the sulfated (100 mg) in 24 . Also showed antiproliferative or cytotoxic activity in HeLa cells of strain, (25 and 100 mg), (25 and 100 mg) and (25, 50 and 100 mg), to native, now for the sulfate concentrations (100 mg) in 24 (25, 50 and 100 mg) in 48 hours, and (50 and 100 mg ) 72h. For their antioxidant activity, the sulfated alginates have better total antioxidant activity reaching 29 % of the native activity while 7.5 % of activity . For the hydroxyl radical AS showed high inhibition ( between 77-83 % ) in concentrations, but the AN surpassed these numbers in the order of 78-92 % inhibition. The reducing power of AN and AS ranged between 39-82 % . In the method of ferric chelation NA reached 100 % chelating while the AS remained at a plateau oscillating 6.5%. However, in this study , we found alginates with promising pharmacological activities, to use in various industries as an antioxidant / anti-tumor compound

Multirresíduo de organoclorados em pescado empregando extração QuEChERS.

Os compostos organoclorados causam grande impacto na natureza devido a três características básicas: persistência ambiental, bioacumulação e alta toxicidade. Foi otimizado e validado um método multirresíduo para analisar 12 pesticidas organoclorados em tilápia: hexaclorobenzeno, lindano, DDE, DDT, clorpirifós, endosulfan sulfato, endosulfan beta, endosulfan alfa, heptacloro, aldrin, endrin and dieldrin, mediante cromatografia a gás equipado com detector de captura de elétrons (CG-μECD). O limite de detecção para todos os compostos foi de 0,0005 μg.mL-1. O limite de quantificação do método foi estabelecido em 0,005 μg.g-1. Os ensaios preliminares de recuperação utilizando fortificação no limite de quantificação do método resultaram em valores de recuperação que variaram entre 70 a 120 %.

Comparação de três técnicas empregadas na extração de multirresíduos de agrotóxicos de uva in natura.

O preparo de amostra é frequentemente a fase crítica de um método multirresíduo, devido à diversidade de substâncias que podem ser extraídas e a ineficiência da extração dos analitos de interesse, aplicados em matrizes com características e composições próprias. Os agrotóxicos são moléculas de estruturas complexas, com características químicas diferentes, como polaridade e estabilidade, e muitas vezes se degradam rapidamente durante o procedimento analítico a seus metabólitos ou a outros produtos. Por estas razões, se faz necessário o desenvolvimento de métodos de preparo de amostras, cada vez mais eficientes e rápidos para determinações de analitos em matrizes complexas. A Extração Líquido-Líquido (ELL) apresenta recuperações satisfatórias para compostos apolares e de média polaridade, porém tem algumas desvantagens relevantes, como pode formar emulsões, requer grandes volumes de solventes, demanda longo tempo de extração e é de difícil automação. A Extração em Fase Sólida (EFS), uma alternativa à ELL, exige pequenos volumes de solvente e é de fácil operação e automação. Dependendo do sorvente, pode ser empregada na análise de compostos polares e apolares. O método QuEChERS apresenta como vantagens rapidez, simplicidade, baixo custo, eficiência, robustez, segurança, baixo consumo de solventes, além de cobrir uma ampla variedade de classes de agrotóxicos (com caráter ácido, básico ou polar). Neste trabalho, foi feito um estudo comparativo entre as técnicas de preparo de amostra: ELL modificada, EFS e o método QuEChERS na extração dos agrotóxicos, ciproconazol, difenoconazol, fenarimol, tebuconazol e triadimefom, aplicados em culturas de uva, para posterior determinação por Cromatografia Líquida de Alta Eficiência (CLAE).

Composição química e rendimento de óleo essencial de alecrim pimenta (Lippia sidoides) submetido a dois tipos de extração.

2009

Estudo da adição do resíduo proveniente da extração de minério de ferro em argilas do Rio Grande do Norte

The mining industry is responsible for the generation of waste from their natural process of extraction. The mining impacts in urban areas are of special importance due to the high urban occupation, which are exacerbated due to the proximity of the mined areas and populated areas. Some solutions to wastedisposal have the potential to significantly reduce the environmental risks and liabilities, but represent higher costs in the stages of deployment and operation. The addition of mining waste as raw material in the development of commercial products reduces the environmental impacts, transforming the waste into a positive element in the generation of employment and income. This thesis studies the incorporation of waste iron ore in two clays, one from the ceramic industry of the City of Natal and the other from the ceramic industry of the Seridó Region, both in the State of Rio Grande do Norte, Brazil. Percentages of iron ore waste of 5%, 10% , 15%, 20%, 25% and 30% were used in the tested ceramic matrix. The two clays and the iron ore waste used as part of this investigation were characterized by X-ray diffraction tests, X-ray fluorescence tests, differential thermal analysis, thermogravimetric analysis and dilatometric analysis. The samples were sintered under temperatures of 850 °C, 950 °C and 1050°C at a heating rate of 5 °C/min with isotherms of two hours. The following tests were performed with the samples: linear shrinkage, water absorption, apparent porosity, apparent density, mass loss in fire and bending resistance in order to obtain their physical and mechanical properties. An amount of 5% of waste iron ore in the matrix clay at a temperature of 850 0C resulted in na increase of about 65% in the tensile strength of the clay samples from the Natal ceramic industry. A linear shrinkage of only 0.12% was observed for the samples, which indicates that the physical properties of the final product were not influenced by the addition of the waste

Valorização integrada de resíduos e subprodutos da extração do azeite: extração e caraterização de compostos bioativos do bagaço de azeitona

Dissertação de Mestrado, Tecnologia de Alimentos, Instituto Superior de Engenharia, Universidade do Algarve, 2016

Efeito da adição de fubá de milho no perfil fermentativo da silagem do resíduo da extração do palmito da pupunha (Bactris gasipaes Kunth).

O objetivo desse trabalho foi avaliar o perfil fermentativo das silagens do resíduo agroindustrial da extração do palmito da pupunha in natura, aditivada com fubá de milho (10% do peso verde) e emurchecida. Utilizou-se silos de laboratório (de PVC, 10 cm de diâmetros x 40 cm de comprimento). As aberturas dos silos ocorreram aos 1, 3, 5, 7, 14, 28 e 56 dias após a ensilagem. Os valores de pH não apresentaram diferença significativa (P>0,05) entre os tratamentos tendo como média (3,80) no dia 56, no entanto esses valores apresentaram padrão de mudança cúbico ao longo dos dias com o valor mínimo sendo atingido no dia 14 para todos os tratamentos. A adição do fubá de milho na silagem elevou os teores de MS (19,71%) e PB (7,09%), no entanto não reduziu o valor de N-NH3/NT (7,89%) apresentando diferença significativa (P<0,05) com o tratamento com emurchecimento que obteve o menor valor de N-NH3/NT (6,35%). A silagem do resíduo da extração do palmito da pupunha aditiva com o fubá de milho melhorou o valor de MS e o valor de PB, podendo ser uma alternativa para alimentação dos ruminantes.

Efeito da adição da torta de dendê no perfil fermentativo da silagem do resíduo da extração do palmito da pupunha (Bactris gasipaes Kunth).

A extração de palmito da pupunha, na região Sul do estado da Bahia, vem gerando grande quantidade de derivados, que podem ser uma alternatia de alimentação para os ruminantes na forma de silagem. Podendo, assim, solucionar o destino desses co-produtos e, desta forma, gerar tecnologias voltadas para o uso sustentável dos recursos naturais associados ao ecossistema regional. O objetivo do trabalho foi avaliar o perfil fermentativo das silagens do co-produto agroindustrial da extração do palmito da pupunha in natura, aditivada com torta de dendê (10% do peso verde) e emurchecida. Utilizou-se silos PVC com 10 cm de diâmetros x 40 cm de comprimento. As aberturas dos silos ocorreram aos 1, 3, 5, 7, 14, 28 e 56 dias após a ensilagem. Os valores de pH não apresentaram diferença significativa (P>0,05) entre os tratamentos tendo como média (3,82) no dia 56, no entanto esses valores apresentaram padrão de mudança cúbica ao longo dos dias com o valor mínimo sendo atingido no dia 14 para todos os tratamentos. A adição da torta de dendê na silagem elevou os teores de MS (21,06%) e PB (7,79%), reduziu os valores de N-NH3/NT (3,73%) e de perda de MS (0,82) apresentando diferença significativa (P<0,05) para os demais tratamentos. A silagem do co-produto da extração do palmito da pupunha aditivada com torta de dendê melhorou os parâmetros de fermentação e o valor de PB. podendo ser uma alternativa para alimentação dos ruminantes.

Adsorção de cobre e cromo utilizando fibra de sisal visando o tratamento da água produzida pela indústria petrolífera

Currently, the oil industry is the biggest cause of environmental pollution. The objective was to reduce the concentration of copper and chromium in the water produced by the oil industry. It was used as adsorbent natural sisal fiber Agave sp treated with nitric acid and sodium hydroxide. All vegetable fibers have physical and morphological properties that enablies the adsorption of pollutants. The basic composition of sisal is cellulose, hemicellulose and lignin. The features are typically found in the characterization of vegetable fibers, except the surface area that was practically zero. In the first stage of adsorption, it was evaluated the effect of temperature and time skeeking to optimize the execution of the factorial design. The results showed that the most feasible fiber was the one treated with acid in five hours (30°C). The second phase was a factorial design, using acid and five hours, this time was it determined in the first phase. The tests were conducted following the experimental design and the results were analyzed by statistical methods in order to optimize the main parameters that influence the process: pH, concentration (mol / L) and fiber mass/ metal solution volume. The volume / mass ratio factor showed significant interference in the adsorption process of chromium and copper. The results obtained after optimization showed that the highest percentages of extraction (98%) were obtained on the following operating conditions: pH: 5-6, Concentration: 100 ppm and mass/ volume: 1 gram of fiber/50mL solution. The results showed that the adsorption process was efficient to remove chromium and copper using sisal fibers, however, requiring further studies to optimize the process.

Efeito da perda de carga e calor no poço injetor no processo de drenagem gravitacional assistido com vapor e solvente

Nowadays, most of the hydrocarbon reserves in the world are in the form of heavy oil, ultra - heavy or bitumen. For the extraction and production of this resource is required to implement new technologies. One of the promising processes for the recovery of this oil is the Expanding Solvent Steam Assisted Gravity Drainage (ES-SAGD) which uses two parallel horizontal wells, where the injection well is situated vertically above the production well. The completion of the process occurs upon injection of a hydrocarbon additive at low concentration in conjunction with steam. The steam adds heat to reduce the viscosity of the oil and solvent aids in reducing the interfacial tension between oil/ solvent. The main force acting in this process is the gravitational and the heat transfer takes place by conduction, convection and latent heat of steam. In this study was used the discretized wellbore model, where the well is discretized in the same way that the reservoir and each section of the well treated as a block of grid, with interblock connection with the reservoir. This study aims to analyze the influence of the pressure drop and heat along the injection well in the ES-SAGD process. The model used for the study is a homogeneous reservoir, semi synthetic with characteristics of the Brazilian Northeast and numerical simulations were performed using the STARS thermal simulator from CMG (Computer Modelling Group). The operational parameters analyzed were: percentage of solvent injected, the flow of steam injection, vertical distance between the wells and steam quality. All of them were significant in oil recovery factor positively influencing this. The results showed that, for all cases analyzed, the model considers the pressure drop has cumulative production of oil below its respective model that disregards such loss. This difference is more pronounced the lower the value of the flow of steam injection

Degradacao termica e catalitica da borra oleosa de Petroleo com materiais nanoestruturados al-mcm-41 e AL-SBA-15

Aiming to reduce and reuse waste oil from oily sludge generated in large volumes by the oil industry, types of nanostructured materials Al-MCM-41 and Al-SBA-15, with ratios of Si / Al = 50, were synthesized , and calcined solids used as catalysts in the degradation of oily sludge thermocatalytic oil from oilfield Canto do Amaro, in the state of Rio Grande do Norte. Samples of nanostructured materials were characterized by thermogravimetric analysis (TG / DTG), X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). The characterization showed that the synthesized materials resulted in a catalyst nanostructure, and ordered pore diameter and surface area according to existing literature. The oily sludge sample was characterized by determining the API gravity and sulfur content and SARA analysis (saturates, aromatics, resins and asphaltenes). The results showed a material equivalent to the average oil with API gravity of 26.1, a low sulfur content and considerable amount of resins and asphaltenes, presented above in the literature. The thermal and catalytic degradation of the oily sludge oil was performed from room temperature to 870 ° C in the ratios of heating of 5, 10 and 20 ° C min-1. The curves generated by TG / DTG showed a more accelerated degradation of oily sludge when it introduced the nanostructured materials. These results were confirmed by activation energy calculated by the method of Flynn-Wall, in the presence of catalysts reduced energy, in particular in the range of cracking, showing the process efficiency, mainly for extraction of lightweight materials of composition of oily sludge, such as diesel and gasoline

Determinação de glifosato e AMPA em maça empregando extração em fase sólida (SPE) e CLAE: comparação entre dois métodos.

2008