Application of 137Cs and 210Pb radionuclides to determine sedimentation rates of recent sediments from admiraty Bay, Antarctica Peninsula

Studies about natural and artificial radionuclides in areas such as the Antarctic are key to understand natural and dynamic processes in marine environments. These studies are important to determine levels of radioactive elements and local sedimentation rates. Five marine sediment cores were collected in different points of Admiralty Bay, in the Antarctic Peninsula. The purpose of this study was to determine 137Cs, 226Ra and 210Pb and sedimentation rates at each site. 137Cs, 210Pb and 226Ra were assayed by gamma-counting through direct measurement of the peak at 661 keV, 47 keV and 609 keV, respectively. Sedimentation rates were obtained by 137Cs and 210Pb (CIC and CRS). The activities for 137Cs ranged from 0.84 to 7.09 Bq kg-1; to 226Ra from 6.77 to 31.07 Bq kg-1 and for 210Pb ranged from 1.10 to 36.90 Bq kg-1. The sedimentation rates obtained by the three models ranged from 0.11±0.01 cm y-1 to 0.46±0.05 cm y-1. The levels of 137Cs registered in this study, as well as in other studies in the Antarctic region indicate that global fallout is the main cause of artificial radionuclides present in this environment, since the Antarctic has not suffered a direct action of human activities that released radioactive elements. The possible grain size variations that occur in the studied points of Admiralty Bay may explain the differences found in the vertical distribution of radionuclides, because of the different values of sedimentation rates and respective dating determined in their profiles

Prediction of sediments toxicity using consensus-based sediment quality guidelines and benthic foraminifera in the Ria de Aveiro(Portugal)

Ria de Aveiro is a large and shallow lagoon on the west coast of Portugal (40º38’N, 8º45´W), characterized by a complex geometry. It includes large areas of intertidal flats and a network of narrow channels which are connected to the Atlantic by an artificial inlet. Tides are the main forcing of the hydrology and physical processes of the lagoon. The deeper areas near the inlet are characterized by strong marine influence through tidal inflow, with high values of current velocity (>1m/s) and tidal range (2–3 m at spring tides), while in remote shallow areas, the circulation and the sea water inflow are reduced. These remote areas are more influenced by fresh waters received from several rivers and several small streams. The Aveiro lagoon is a very important ecosystem but as been used as recipient for various kinds of anthropogenic wastes resulting from the high population density, urban activities and industrial development. One of the most important Portuguese industrial centre is located in the lagoon margins. Ria de Aveiro is a coastal lagoon under huge direct antropization. This system also suffers strong diffuse antropization. This work is related with diffuse antropization linked with chemical pollution which may lead to biological stress and collapse.

An evaluation of the distributions of polychlorinated biphenyls and organic matter in coastal sediments

The objective of this thesis is to improve the understanding of what processes and mechanism affects the distribution of polychlorinated biphenyls (PCBs) and organic carbon in coastal sediments. Because of the strong association of hydrophobic organic contaminants (HOCs) such as PCBs with organic matter in the aquatic environment, these two entities are naturally linked. The coastal environment is the most complex and dynamic part of the ocean when it comes to both cycling of organic matter and HOCs. This environment is characterised by the largest fluxes and most diverse sources of both entities. A wide array of methods was used to study these processes throughout this thesis. In the field sites in the Stockholm archipelago of the Baltic proper, bottom sediments and settling particulate matter were retrieved using sediment coring devices and sediment traps from morphometrically and seismically well-characterized locations. In the laboratory, the samples have been analysed for PCBs, stable carbon isotope ratios, carbon-nitrogen atom ratios as well as standard sediment properties. From the fieldwork in the Stockholm Archipelago and the following laboratory work it was concluded that the inner Stockholm archipelago has a low (≈ 4%) trapping efficiency for freshwater-derived organic carbon. The corollary is a large potential for long-range waterborne transport of OC and OC-associated nutrients and hydrophobic organic pollutants from urban Stockholm to more pristine offshore Baltic Sea ecosystems. Theoretical work has been carried out using Geographical Information Systems (GIS) and statistical methods on a database of 4214 individual sediment samples, each with reported individual PCB congener concentrations. From this work it was concluded that the continental shelf sediments are key global inventories and ultimate sinks of PCBs. Depending on congener, 10-80% of the cumulative historical emissions to the environment are accounted for in continental shelf sediments. Further it was concluded that the many infamous and highly contaminated surface sediments of urban harbours and estuaries of contaminated rivers cannot be of importance as a secondary source to sustain the concentrations observed in remote sediments. Of the global shelf PCB inventory < 1% are in sediments near population centres while ≥ 90% is in remote areas (> 10 km from any dwellings). The remote sub-basin of the North Atlantic Ocean contains approximately half of the global shelf sediment inventory for most of the PCBs studied.

Be analysis of bottom sediments in dynamic fluid-structure interaction problems

[EN] Sediment materials play an important role on the dynamic response of large structures where fluid-soil-structure interaction is relevant and materials of that kind are present. Dam-reservoir systems and harbor structures are examples of civil engineering constructions where those effects are significant.

Exploring physical processes related to past climate proxies: lake sediments and stable water isotopes

Proxy data are essential for the investigation of climate variability on time scales larger than the historical meteorological observation period. The potential value of a proxy depends on our ability to understand and quantify the physical processes that relate the corresponding climate parameter and the signal in the proxy archive. These processes can be explored under present-day conditions. In this thesis, both statistical and physical models are applied for their analysis, focusing on two specific types of proxies, lake sediment data and stable water isotopes.rnIn the first part of this work, the basis is established for statistically calibrating new proxies from lake sediments in western Germany. A comprehensive meteorological and hydrological data set is compiled and statistically analyzed. In this way, meteorological times series are identified that can be applied for the calibration of various climate proxies. A particular focus is laid on the investigation of extreme weather events, which have rarely been the objective of paleoclimate reconstructions so far. Subsequently, a concrete example of a proxy calibration is presented. Maxima in the quartz grain concentration from a lake sediment core are compared to recent windstorms. The latter are identified from the meteorological data with the help of a newly developed windstorm index, combining local measurements and reanalysis data. The statistical significance of the correlation between extreme windstorms and signals in the sediment is verified with the help of a Monte Carlo method. This correlation is fundamental for employing lake sediment data as a new proxy to reconstruct windstorm records of the geological past.rnThe second part of this thesis deals with the analysis and simulation of stable water isotopes in atmospheric vapor on daily time scales. In this way, a better understanding of the physical processes determining these isotope ratios can be obtained, which is an important prerequisite for the interpretation of isotope data from ice cores and the reconstruction of past temperature. In particular, the focus here is on the deuterium excess and its relation to the environmental conditions during evaporation of water from the ocean. As a basis for the diagnostic analysis and for evaluating the simulations, isotope measurements from Rehovot (Israel) are used, provided by the Weizmann Institute of Science. First, a Lagrangian moisture source diagnostic is employed in order to establish quantitative linkages between the measurements and the evaporation conditions of the vapor (and thus to calibrate the isotope signal). A strong negative correlation between relative humidity in the source regions and measured deuterium excess is found. On the contrary, sea surface temperature in the evaporation regions does not correlate well with deuterium excess. Although requiring confirmation by isotope data from different regions and longer time scales, this weak correlation might be of major importance for the reconstruction of moisture source temperatures from ice core data. Second, the Lagrangian source diagnostic is combined with a Craig-Gordon fractionation parameterization for the identified evaporation events in order to simulate the isotope ratios at Rehovot. In this way, the Craig-Gordon model can be directly evaluated with atmospheric isotope data, and better constraints for uncertain model parameters can be obtained. A comparison of the simulated deuterium excess with the measurements reveals that a much better agreement can be achieved using a wind speed independent formulation of the non-equilibrium fractionation factor instead of the classical parameterization introduced by Merlivat and Jouzel, which is widely applied in isotope GCMs. Finally, the first steps of the implementation of water isotope physics in the limited-area COSMO model are described, and an approach is outlined that allows to compare simulated isotope ratios to measurements in an event-based manner by using a water tagging technique. The good agreement between model results from several case studies and measurements at Rehovot demonstrates the applicability of the approach. Because the model can be run with high, potentially cloud-resolving spatial resolution, and because it contains sophisticated parameterizations of many atmospheric processes, a complete implementation of isotope physics will allow detailed, process-oriented studies of the complex variability of stable isotopes in atmospheric waters in future research.rn

Stream sediments analysis for geochemical mapping of Romagna Apennines (Northern Italy): monitoring and management tool of environmental resources at various scales

Geochemical mapping is a valuable tool for the control of territory that can be used not only in the identification of mineral resources and geological, agricultural and forestry studies but also in the monitoring of natural resources by giving solutions to environmental and economic problems. Stream sediments are widely used in the sampling campaigns carried out by the world's governments and research groups for their characteristics of broad representativeness of rocks and soils, for ease of sampling and for the possibility to conduct very detailed sampling In this context, the environmental role of stream sediments provides a good basis for the implementation of environmental management measures, in fact the composition of river sediments is an important factor in understanding the complex dynamics that develop within catchment basins therefore they represent a critical environmental compartment: they can persistently incorporate pollutants after a process of contamination and release into the biosphere if the environmental conditions change. It is essential to determine whether the concentrations of certain elements, in particular heavy metals, can be the result of natural erosion of rocks containing high concentrations of specific elements or are generated as residues of human activities related to a certain study area. This PhD thesis aims to extract from an extensive database on stream sediments of the Romagna rivers the widest spectrum of informations. The study involved low and high order stream in the mountain and hilly area, but also the sediments of the floodplain area, where intensive agriculture is active. The geochemical signals recorded by the stream sediments will be interpreted in order to reconstruct the natural variability related to bedrock and soil contribution, the effects of the river dynamics, the anomalous sites, and with the calculation of background values be able to evaluate their level of degradation and predict the environmental risk.

Bioremediation of PCB-contaminated marine sediments: From identification of indigenous dehalorespirers to enhancement of microbial reductive dechlorination

Marine sediments are the main accumulation reservoir of organic recalcitrant pollutants such as polychlorinated biphenyls (PCBs). In the anoxic conditions typical of these sediments, anaerobic bacteria of the phylum Chloroflexi are able to attack these compounds in a process called microbial reductive dechlorination. Such activity and members of this phylum were detected in PCB-impacted sediments of the Venice Lagoon. The aim of this work was to investigate microbial reductive dechlorination and design bioremediation approaches for marine sediments of the area. Three out of six sediment cultures from different sampling areas exhibited dechlorination activities in the same conditions of the site and two phylotypes (VLD-1 and VLD-2) were detected and correlated to this metabolism. Biostimulation was tested on enriched dechlorinating sediment cultures from the same site using five different electron donors, of which lactate was the best biostimulating agent; complementation of microbial and chemical dechlorination catalyzed by biogenic zerovalent Pd nanoparticles was not effective due to sulfide poisoning of the catalyst. A new biosurfactant-producing strain of Shewanella frigidimarina was concomitantly obtained from hydrocarbon-degrading marine cultures and selected because of the low toxicity of its product. All these findings were then exploited to develop bioremediation lab-scale tests in shaken reactors and static microcosms on real sediments and water of the Venice lagoon, testing i) a bioaugmentation approach, with a selected enriched sediment culture from the same area, ii) a biostimulation approach with lactate as electron donor, iii) a bioavailability enhancement with the supplementation of the newly-discovered biosurfactant, and iv) all possible combinations of the afore-mentioned approaches. The best bioremediation approach resulted to be a combination of bioaugmentation and bioremediation and it could be a starting point to design bioremediation process for actual marine sediments of the Venice Lagoon area.