Glutamine and antioxidants in the critically ill patient: a post hoc analysis of a large-scale randomized trial.

BACKGROUND: The recent large randomized controlled trial of glutamine and antioxidant supplementation suggested that high-dose glutamine is associated with increased mortality in critically ill patients with multiorgan failure. The objectives of the present analyses were to reevaluate the effect of supplementation after controlling for baseline covariates and to identify potentially important subgroup effects. MATERIALS AND METHODS: This study was a post hoc analysis of a prospective factorial 2 × 2 randomized trial conducted in 40 intensive care units in North America and Europe. In total, 1223 mechanically ventilated adult patients with multiorgan failure were randomized to receive glutamine, antioxidants, both glutamine and antioxidants, or placebo administered separate from artificial nutrition. We compared each of the 3 active treatment arms (glutamine alone, antioxidants alone, and glutamine + antioxidants) with placebo on 28-day mortality. Post hoc, treatment effects were examined within subgroups defined by baseline patient characteristics. Logistic regression was used to estimate treatment effects within subgroups after adjustment for baseline covariates and to identify treatment-by-subgroup interactions (effect modification). RESULTS: The 28-day mortality rates in the placebo, glutamine, antioxidant, and combination arms were 25%, 32%, 29%, and 33%, respectively. After adjusting for prespecified baseline covariates, the adjusted odds ratio of 28-day mortality vs placebo was 1.5 (95% confidence interval, 1.0-2.1, P = .05), 1.2 (0.8-1.8, P = .40), and 1.4 (0.9-2.0, P = .09) for glutamine, antioxidant, and glutamine plus antioxidant arms, respectively. In the post hoc subgroup analysis, both glutamine and antioxidants appeared most harmful in patients with baseline renal dysfunction. No subgroups suggested reduced mortality with supplements. CONCLUSIONS: After adjustment for baseline covariates, early provision of high-dose glutamine administered separately from artificial nutrition was not beneficial and may be associated with increased mortality in critically ill patients with multiorgan failure. For both glutamine and antioxidants, the greatest potential for harm was observed in patients with multiorgan failure that included renal dysfunction upon study enrollment.

Endosseous dental implant fractures an analysis of 21 cases

Implant fracture is an infrequent cause of implant failure. The present study evaluates 21 fractured implants, with an analysis of patient age and sex, the type, length and diameter of the implant, positioning in the dental arch, the type of prosthetic rehabilitation involved, the number of abutments and pontics, the presence or absence of distal extensions or cantilevers, and loading time to fracture. Implant fracture was more common in males than in females (15:4), and the mean patient age was 56.9 years. Most cases (n = 19) corresponded to implant-supported fixed prostheses - 16 with cantilevers of different lengths- while only two fractured implants were supporting overdentures instead of fixed prostheses. The great majority of fractured implants (80.9%) were located in the molar and premolar regions, and most fractured within 3-4 years after loading. It is important to know and apply the measures required to prevent implant fracture, and to seek the best individualized solution for each case - though complete implant removal is usually the treatment of choice

Analysis of Crankshaft Using Multibody Dynamics

Työn tavoitteena oli löytää tarkka menetelmä kampiakselin vaurioitumisriskin laskentaan vertailemalla eri laskentamenetelmiä. Lopuksi suoritettiin simulointi monikappalejärjestelmälle käyttäen elastisia malleja todellisista rakenteista. Simulointiohjelmana käytettiin AVL:n kehittämää Excite:ia.

Early transjugular intrahepatic portosystemic shunt in cirrhotic patients with acute variceal bleeding: a systematic review and meta-analysis of controlled trials.

INTRODUCTION: There is conflicting evidence on the benefit of early transjugular intrahepatic portosystemic shunt (TIPSS) on the survival of patients with acute variceal bleeding (AVB). AIM: To assess the effect of early TIPSS on patient prognosis. MATERIALS AND METHODS: We carried out a meta-analysis of trials evaluating early TIPSS in cirrhotic patients with AVB. RESULTS: Four studies were included. Early TIPSS was associated with fewer deaths [odds ratio (OR)=0.38, 95% confidence interval (CI)=0.17-0.83, P=0.02], with moderate heterogeneity between studies (P=0.15, I=44%). Early TIPSS was not significantly associated with fewer deaths among Child-Pugh B patients (OR=0.35, 95% CI=0.10-1.17, P=0.087) nor among Child-Pugh C patients (OR=0.34, 95% CI=0.10-1.11, P=0.074). There was no heterogeneity between studies in the Child-Pugh B analysis (P=0.6, I=0%), but there was a high heterogeneity in the Child-Pugh C analysis (P=0.06, I=60%). Early TIPSS was associated with lower rates of bleeding within 1 year (OR=0.08, 95% CI=0.04-0.17, P<0.001) both among Child-Pugh B patients, (OR=0.15, 95% CI=0.05-0.47, P=0.001) and among Child-Pugh C patients (OR=0.05, 95% CI=0.02-0.15, P<0.001), with no heterogeneity between studies. Early TIPSS was not associated with higher rates of encephalopathy (OR=0.84, 95% CI=0.50-1.42, P=0.5). CONCLUSION: Cirrhotic patients with AVB treated with early TIPSS had lower death rates and lower rates of clinically significant bleeding within 1 year compared with patients treated without early TIPSS. Additional studies are required to identify the potential risk factors leading to a poor prognosis after early TIPSS in patients with AVB and to determine the impact of the degree of liver failure on the patient's prognosis.

Digitalización del sistema de control de nivel en calentadores y tanques de drenaje de una Central Nuclear

Contexto Una central nuclear, al igual que cualquier otro tipo de central generadora de energía eléctrica, mediante turbinas de vapor, está basada en un proceso termodinámico. El rendimiento de las mismas es función del salto entálpico del vapor, para mejorarlo las centrales están constituidas por un ciclo compound formado por turbina de alta presión y turbinas de baja presión, y un ciclo regenerativo consistente en calentar el agua de alimentación antes de su introducción a los generadores de vapor. Un ciclo regenerativo está basado en etapas de calentadores o cambiadores de calor para aprovechar al máximo la energía térmica del vapor, este proyecto está basado en la mejora y optimización del proceso de control de estos para contribuir a mejorar el rendimiento de la central. Objetivo Implementar un sistema de control que nos permita modernizar los clásicos sistemas basados en controles locales y comunicaciones analógicas. Mejorar el rendimiento del ciclo regenerativo de la central, aprovechando las mejoras tecnológicas que ofrece el mercado, tanto en el hardware como en el software de los sistemas de instrumentación y control. Optimizar el rendimiento de los lazos de control de cada uno de los elementos del ciclo regenerativo mediante estrategias de control. Procedimiento Desarrollo de un sistema de control actualizado considerando, como premisa principal, la fiabilidad del sistema, el análisis de fallos y la jerarquización del riesgo. Análisis y cálculo de los lazos de control considerando las premisas establecidas. Configuración de los lazos mediante estrategias de control que nos permitan optimizar y minimizar los efectos del fallo. Para ello se han utilizado parámetros y datos extraídos de la Central Nuclear de Ascó. Conclusiones Se ha modernizado y optimizado el sistema de control mejorando el rendimiento del ciclo regenerativo. Se ha conseguido un sistema más fiable, reduciendo el riesgo del fallo y disminuyendo los efectos de los mismos. El coste de un proyecto de estas características es inferior al de un sistema convencional y ofrece más posibilidades. Es un sistema abierto que permite utilizar e interconectar equipos de diferentes fabricantes, lo que favorece tanto el mantenimiento como las posibles ampliaciones futuras del sistema.

On the Analysis and Control of a Linear Synchronous Servomotor with a Flexible Load

Industry's growing need for higher productivity is placing new demands on mechanisms connected with electrical motors, because these can easily lead to vibration problems due to fast dynamics. Furthermore, the nonlinear effects caused by a motor frequently reduce servo stability, which diminishes the controller's ability to predict and maintain speed. Hence, the flexibility of a mechanism and its control has become an important area of research. The basic approach in control system engineering is to assume that the mechanism connected to a motor is rigid, so that vibrations in the tool mechanism, reel, gripper or any apparatus connected to the motor are not taken into account. This might reduce the ability of the machine system to carry out its assignment and shorten the lifetime of the equipment. Nonetheless, it is usually more important to know how the mechanism, or in other words the load on the motor, behaves. A nonlinear load control method for a permanent magnet linear synchronous motor is developed and implemented in the thesis. The purpose of the controller is to track a flexible load to the desired velocity reference as fast as possible and without awkward oscillations. The control method is based on an adaptive backstepping algorithm with its stability ensured by the Lyapunov stability theorem. As a reference controller for the backstepping method, a hybrid neural controller is introduced in which the linear motor itself is controlled by a conventional PI velocity controller and the vibration of the associated flexible mechanism is suppressed from an outer control loop using a compensation signal from a multilayer perceptron network. To avoid the local minimum problem entailed in neural networks, the initial weights are searched for offline by means of a differential evolution algorithm. The states of a mechanical system for controllers are estimated using the Kalman filter. The theoretical results obtained from the control design are validated with the lumped mass model for a mechanism. Generalization of the mechanism allows the methods derived here to be widely implemented in machine automation. The control algorithms are first designed in a specially introduced nonlinear simulation model and then implemented in the physical linear motor using a DSP (Digital Signal Processor) application. The measurements prove that both controllers are capable of suppressing vibration, but that the backstepping method is superior to others due to its accuracy of response and stability properties.

(210)Po poisoning as possible cause of death: forensic investigations and toxicological analysis of the remains of Yasser Arafat.

The late president of the Palestinian Authority, Yasser Arafat, died in November 2004 in Percy Hospital, one month after having experienced a sudden onset of symptoms that included severe nausea, vomiting, diarrhoea and abdominal pain and which were followed by multiple organ failure. In spite of numerous investigations performed in France, the pathophysiological mechanisms at the origin of the symptoms could not be identified. In 2011, we found abnormal levels of polonium-210 ((210)Po) in some of Arafat's belongings that were worn during his final hospital stay and which were stained with biological fluids. This finding led to the exhumation of Arafat's remains in 2012. Significantly higher (up to 20 times) activities of (210)Po and lead-210 ((210)Pb) were found in the ribs, iliac crest and sternum specimens compared to reference samples from the literature (p-value <1%). In all specimens from the tomb, (210)Po activity was supported by a similar activity of (210)Pb. Biokinetic calculations demonstrated that a (210)Pb impurity, as identified in a commercial source of 3MBq of (210)Po, may be responsible for the activities measured in Arafat's belongings and remains 8 years after his death. The absence of myelosuppression and hair loss in Mr Arafat's case compared to Mr Litvinenko's, the only known case of malicious poisoning with (210)Po, could be explained by differences in the time delivery-scheme of intake. In conclusion, statistical Bayesian analysis combining all the evidence gathered in our forensic expert report moderately supports the proposition that Mr Arafat was poisoned by (210)Po.

Systematic review with meta-analysis: self-expanding metal stents in patients with cirrhosis and severe or refractory oesophageal variceal bleeding.

BACKGROUND: The prognosis of patients with cirrhosis and acute variceal bleeding is very poor when the standard-of-care fails to control bleeding. New treatment modalities are needed in these patients. AIM: To synthesise the available evidence on the efficacy of self-expanding metal stents (SEMS) in patients with cirrhosis and severe or refractory oesophageal variceal bleeding. METHODS: Meta-analysis of trials evaluating SEMS in patients with cirrhosis and severe or refractory oesophageal variceal bleeding. RESULTS: Thirteen studies were included. The pooled estimate rates were 0.40 (95% confidence interval, CI = 0.31-0.49) for death, 0.41 (95% CI = 0.29-0.53) for liver-related death and 0.36 (95% CI = 0.26-0.47) for death at day 30, with low heterogeneity between studies. The pooled estimate rates were 0.12 (95% CI = 0.07-0.21) for mortality related to variceal bleeding, and 0.18 (95% CI = 0.11-0.29) for failure to control bleeding with SEMS, with no or low heterogeneity between studies. The pooled estimate rate were 0.16 (95% CI = 0.04-0.48) for rebleeding after stent removal and 0.28 (95% CI = 0.17-0.43) for stent migration, with high heterogeneity. A significant proportion of patients had access to liver transplantation or to TIPSS [pooled estimate rate 0.10 (95% CI = 0.04-0.21) and 0.26 (95% CI = 0.18-0.36), respectively]. CONCLUSIONS: Fewer than 40% of patients treated with SEMS were dead at 1 month. SEMS can be used as a bridge to TIPSS or to liver transplantation in a significant proportion of patients. Additional studies are required to identify potential risk factors leading to a poor prognosis in patients with acute variceal bleeding in whom the use of SEMS could be considered.

Phenotypical analysis of mice deficient for the channel activating protease CAP2

Channel activating proteases (CAP) are membrane-bound serine proteases that have been identified as in vitro activators of the epithelial sodium channel (ENaC). Two of them are mainly studied in the laboratory. CAP1/Prss8 was previously shown implicated in colonic sodium homeostasis in vivo. In the first part of this thesis, we generated and characterized mice deficient for CAP2/Tmprss4. The mice are healthy and viable, and they do not show any obvious phenotype. We investigated ENaC activity and expression under regular and sodium- deficient diet, and we could demonstrate that CAP2 is not a major regulator of sodium homeostasis in vivo. We next studied whether CAP2 is implicated in potassium homeostasis. We detected a strong gender-dependency when CAP2 knock-out mice were put under a potassium-deficient diet. We showed in male mice an implication of CAP2 in the regulation of the colonic H+, K+- ATPase, and we propose an implication of membrane-associated progesterone receptors and their binding partners, as well as a possible cleavage-mediated glucocorticoid receptor signalling. We studied the possible interaction between CAPI and CAP2 by generating and characterizing two different mouse study groups, displaying different hypomorphic mutations in the CAPI gene, and deficient for CAP2. We demonstrate that balanced expression of CAPI and CAP2 is required for maintainance of skin integrity and for normal placental development. As CAPI knock-out embryos die due to a placental failure, the additional combined deletion of CAP2 resulted in survival until birth. We could evidence that CAPI and CAP2 are implicated in the same signalling pathway as proposed in cancer studies at the level of the placenta, implicating integrin a5, ERK, AKT, E- and N-cadherin. Furthermore, we investigated whether CAPI is implicated in the pathogenesis and susceptibility to experimental chronic colitis in a mutant rat model. By giving CAPI mutant rats Dextran sodium sulfate, we induced chronic inflammation of the colon, and we highlighted the protective role of CAPI at the histopathological and clinical levels. In conclusion, we showed that CAP2 is not a major regulator of ENaC-mediated sodium homeostasis in vivo, but rather a regulator of potassium homeostasis in a gender-dependent manner implicating the colonic H+, K+-ATPase, membrane progesterone receptors, and the glucocorticoid receptor. We have investigated whether CAPI and CAP2 interact at the functional level, and we show that a balanced expression of CAPI and CAP2 is required in the skin, but also in the placenta. Imbalanced expression of CAPI and CAP2 leads to impaired EMT-associated signalling. We have studied whether CAPI is implicated in the pathogenesis and susceptibility to chronic colitis, and we demonstrated the protective role of CAPI in distal colon. -- Les protéases activatrices de canal (CAP) sont des protéases à serine attachées à la membrane qui ont été identifiées comme activateurs in vitro du canal sodique épithélial (ENaC). Deux de ces protéases sont principalement étudiées dans le laboratoire. CAP1/Prss8 a été identifié préalablement comme impliqué dans l'homéostasie du sodium in vivo au niveau du côlon. Dans la première partie de cette thèse, nous avons généré et caractérisé des souris déficientes pour CAP2/Tmprss4. Les souris sont en bonne santé et viables, et elles ne présentent pas de phénotype visible. Nous avons étudié l'activité et l'expression d'ENaC sous diète normale et déficiente en sodium, et nous avons démontré que CAP2 n'est pas un régulateur essentiel de l'homéostasie sodique in vivo. Nous avons ensuite étudié si CAP2 est impliqué dans l'homéostasie du potassium. Nous avons détecté une forte dépendance du sexe lorsque les souris knock-out pour CAP2 étaient placées sous diète déficiente en potassium. Nous avons démontré dans les souris mâles une implication de CAP2 dans la régulation de la H+, K+- ATPase colonique, des récepteurs membranaires à la progestérone et de leur partenaires de liaison, ainsi que dans la possible signalisation médiée par le clivage du récepteur aux glucocorticoïdes. Nous avons étudié l'interaction possible entre CAPI et CAP2 en générant et en caractérisant deux groupes d'étude de souris différents, porteurs de différentes mutations hypomorphiques dans le gène de CAPI, et déficients pour CAP2. Nous avons pu montrer qu'une expression équilibrée de CAPI et CAP2 est requise pour le maintien de l'intégrité de la peau et pour le développement normal du placenta. Les embryons knock-out pour CAPI meurent suite à une défaillance placentaire, et la délétion additionnelle et combinée de CAP2 permet la survie jusqu'à la naissance. Nous supposons que CAPI et CAP2 sont impliqués dans la même voie de signalisation au niveau du placenta que celle proposée dans les études de cancer, impliquant l'intégrine a5, ERK, AKT, E- et N-cadhérine. De plus, nous avons étudié si CAPI est impliqué dans la pathogenèse et la susceptibilité de colite chronique expérimentale dans un modèle de rat mutant. En administrant aux rats mutants pour CAPI du Dextran sodium sulfate, nous avons induit une inflammation chronique du côlon, et nous avons pu mettre en évidence le rôle protecteur de CAPI au niveau histopathologique et au niveau clinique. En conclusion, nous avons démontré que CAP2 n'est pas un régulateur essentiel de l'homéostasie sodique médiée par ENaC in vivo, mais plutôt de l'homéostasie potassique d'une manière dépendante du sexe et impliquant la H+, K+-ATPase colonique, les récepteurs membranaires à la progestérone et le récepteur aux glucocorticoïdes. Nous avons étudié si CAPI et CAP2 interagissent au niveau fonctionnel, et nous avons montré qu'une expression équilibrée entre CAPI et CAP2 est requise dans la peau et le placenta. L'expression déséquilibrée de CAPI et CAP2 mène à une altération de la signalisation associée à l'EMT. Nous avons étudié si CAPI est impliqué dans la pathogenèse et la susceptibilité de colite chronique expérimentale, et nous avons démontré le rôle protecteur de CAPI dans le côlon distal.

Effect of partial-thickness tear on loading capacities of the supraspinatus tendon: a finite element analysis.

Partial-thickness tears of the supraspinatus tendon frequently occur at its insertion on the greater tubercule of the humerus, causing pain and reduced strength and range of motion. The goal of this work was to quantify the loss of loading capacity due to tendon tears at the insertion area. A finite element model of the supraspinatus tendon was developed using in vivo magnetic resonance images data. The tendon was represented by an anisotropic hyperelastic constitutive law identified with experimental measurements. A failure criterion was proposed and calibrated with experimental data. A partial-thickness tear was gradually increased, starting from the deep articular-sided fibres. For different values of tendon tear thickness, the tendon was mechanically loaded up to failure. The numerical model predicted a loss in loading capacity of the tendon as the tear thickness progressed. Tendon failure was more likely when the tendon tear exceeded 20%. The predictions of the model were consistent with experimental studies. Partial-thickness tears below 40% tear are sufficiently stable to persist physiotherapeutic exercises. Above 60% tear surgery should be considered to restore shoulder strength.

Prognostic Importance of the Cuse of Renal Failure in Patients With Cirrhosis

BACKGROUND & AIMS: The prognostic value of the different causes of renal failure in cirrhosis is not well established. This study investigated the predictive value of the cause of renal failure in cirrhosis. METHODS: Five hundred sixty-two consecutive patients with cirrhosis and renal failure (as defined by serum creatinine 1.5 mg/dL on 2 successive determinations within 48 hours) hospitalized over a 6-year period in a single institution were included in a prospective study. The cause of renal failure was classified into 4 groups: renal failure associated with bacterial infections, renal failure associated with volume depletion, hepatorenal syndrome (HRS), and parenchymal nephropathy. The primary end point was survival at 3 months. RESULTS: Four hundred sixty-three patients (82.4%) had renal failure that could be classified in 1 of 4 groups. The most frequent was renal failure associated with infections (213 cases; 46%), followed by hypovolemia-associated renal failure (149; 32%), HRS (60; 13%), and parenchymal nephropathy (41; 9%). The remaining patients had a combination of causes or miscellaneous conditions. Prognosis was markedly different according to cause of renal failure, 3-month probability of survival being 73% for parenchymal nephropathy, 46% for hypovolemia-associated renal failure, 31% for renal failure associated with infections, and 15% for HRS (P .0005). In a multivariate analysis adjusted for potentially confounding variables, cause of renal failure was independently associated with prognosis, together with MELD score, serum sodium, and hepatic encephalopathy at time of diagnosis of renal failure. CONCLUSIONS: A simple classification of patients with cirrhosis according to cause of renal failure is useful in assessment of prognosis and may help in decision making in liver transplantation.

Analysis of the process of inspection in recreational craft in Spain. Suggestions for safety improvement

Inspections of pleasure boats in Spain can be carried out by collaborating entities of inspection, entities that must be authorized by the Maritime Administration. This authorization allows to perform effective inspections and technical controls of recreational crafts. Recreational crafts are subjected to surveys that are based on the registration list and on the material used in the hull. In addition, required safety equipment of the recreational boat depends on the distance that the recreational boat is authorized to navigate. Following data obtained from inspections of recreational craft, this paper aims to analyze information about hulls within dry and afloat conditions, about the equipment for rescue and safety, and about other nautical equipment; as well as to perform and improve different verifications during the inspections. All this information points to several aspects relevant for the optimization of the inspection process, the ultimate target being increasing efficiency and effectiveness, and ensuring more safety in recreational craft.

ESTRO-HERO survey: Radiotherapy equipment and departments in the European countries: Final results from the ESTRO-HERO survey

Background: Documenting the distribution of radiotherapy departments and the availability of radiotherapy equipment in the European countries is an important part of HERO the ESTRO Health Economics in Radiation Oncology project. HERO has the overall aim to develop a knowledge base of the provision of radiotherapy in Europe and build a model for health economic evaluation of radiation treatments at the European level. The aim of the current report is to describe the distribution of radiotherapy equipment in European countries. Methods: An 84-item questionnaire was sent out to European countries, principally through their national societies. The current report includes a detailed analysis of radiotherapy departments and equipment (questionnaire items 2629), analyzed in relation to the annual number of treatment courses and the socio-economic status of the countries. The analysis is based on validated responses from 28 of the 40 European countries defined by the European Cancer Observatory (ECO). Results: A large variation between countries was found for most parameters studied. There were 2192 linear accelerators, 96 dedicated stereotactic machines, and 77 cobalt machines reported in the 27 countries where this information was available. A total of 12 countries had at least one cobalt machine in use. There was a median of 0.5 simulator per MV unit (range 0.31.5) and 1.4 (range 0.44.4) simulators per department. Of the 874 simulators, a total of 654 (75%) were capable of 3D imaging (CT-scanner or CBCToption). The number of MV machines (cobalt, linear accelerators, and dedicated stereotactic machines) per million inhabitants ranged from 1.4 to 9.5 (median 5.3) and the average number of MV machines per department from 0.9 to 8.2 (median 2.6). The average number of treatment courses per year per MV machine varied from 262 to 1061 (median 419). While 69% of MV units were capable of IMRT only 49% were equipped for image guidance (IGRT). There was a clear relation between socio-economic status, as measured by GNI per capita, and availability of radiotherapy equipment in the countries. In many low income countries in Southern and Central-Eastern Europe there was very limited access to radiotherapy and especially to equipment for IMRT or IGRT. Conclusions: The European average number of MV machines per million inhabitants and per department is now better in line with QUARTS recommendations from 2005, but the survey also showed a significant heterogeneity in the access to modern radiotherapy equipment in Europe. High income countries especially in Northern-Western Europe are well-served with radiotherapy resources, other countries are facing important shortages of both equipment in general and especially machines capable of delivering high precision conformal treatments (IMRT, IGRT)

A Practical Micro Mechanical Model Based Local Approach Methodology for the Analysis of Ductile Fracture of Welded T-Joints

This thesis concentrates on developing a practical local approach methodology based on micro mechanical models for the analysis of ductile fracture of welded joints. Two major problems involved in the local approach, namely the dilational constitutive relation reflecting the softening behaviour of material, and the failure criterion associated with the constitutive equation, have been studied in detail. Firstly, considerable efforts were made on the numerical integration and computer implementation for the non trivial dilational Gurson Tvergaard model. Considering the weaknesses of the widely used Euler forward integration algorithms, a family of generalized mid point algorithms is proposed for the Gurson Tvergaard model. Correspondingly, based on the decomposition of stresses into hydrostatic and deviatoric parts, an explicit seven parameter expression for the consistent tangent moduli of the algorithms is presented. This explicit formula avoids any matrix inversion during numerical iteration and thus greatly facilitates the computer implementation of the algorithms and increase the efficiency of the code. The accuracy of the proposed algorithms and other conventional algorithms has been assessed in a systematic manner in order to highlight the best algorithm for this study. The accurate and efficient performance of present finite element implementation of the proposed algorithms has been demonstrated by various numerical examples. It has been found that the true mid point algorithm (a = 0.5) is the most accurate one when the deviatoric strain increment is radial to the yield surface and it is very important to use the consistent tangent moduli in the Newton iteration procedure. Secondly, an assessment of the consistency of current local failure criteria for ductile fracture, the critical void growth criterion, the constant critical void volume fraction criterion and Thomason's plastic limit load failure criterion, has been made. Significant differences in the predictions of ductility by the three criteria were found. By assuming the void grows spherically and using the void volume fraction from the Gurson Tvergaard model to calculate the current void matrix geometry, Thomason's failure criterion has been modified and a new failure criterion for the Gurson Tvergaard model is presented. Comparison with Koplik and Needleman's finite element results shows that the new failure criterion is fairly accurate indeed. A novel feature of the new failure criterion is that a mechanism for void coalescence is incorporated into the constitutive model. Hence the material failure is a natural result of the development of macroscopic plastic flow and the microscopic internal necking mechanism. By the new failure criterion, the critical void volume fraction is not a material constant and the initial void volume fraction and/or void nucleation parameters essentially control the material failure. This feature is very desirable and makes the numerical calibration of void nucleation parameters(s) possible and physically sound. Thirdly, a local approach methodology based on the above two major contributions has been built up in ABAQUS via the user material subroutine UMAT and applied to welded T joints. By using the void nucleation parameters calibrated from simple smooth and notched specimens, it was found that the fracture behaviour of the welded T joints can be well predicted using present methodology. This application has shown how the damage parameters of both base material and heat affected zone (HAZ) material can be obtained in a step by step manner and how useful and capable the local approach methodology is in the analysis of fracture behaviour and crack development as well as structural integrity assessment of practical problems where non homogeneous materials are involved. Finally, a procedure for the possible engineering application of the present methodology is suggested and discussed.

Multichannel distribution strategy for electrical equipment marketing

The thesis examines System Integration and original equipment manufacturer (OEM) channel in the St. Petersburg drives market. The aim of the study was to increase understanding the relationship between OEM and SI and producers, problems and ongoing trends. The collected data was analyzed in order to find out which features of a power electronic drive product exercise a significant influence for the Russian companies decision. An essential part of this study was interviews as primary information sources, organized with SI and OEM companies which represented the basic SPb industry segments. The wholesalers and end users are left out from the analysis. The collected data was analyzed in order to find out which features of a power electronic drive product exercise a significant influence for the Russian companies decision.