Propriedades estruturais de géis de sílica preparados com adições de dodecil sulfato de sódio

This work aims to study the structural characteristics of silica gels obtained from the acid hydrolysis of tetraethoxysilane (TEOS) in water solutions with different concentrations of sodium dodecyl sulfate (SDS). The structural characteristics were studied in stages ranging from the wet gel to the dry stages of the gels (aerogels and xerogels). Aerogels were obtained by ambient pressure drying (APD) after silylation process using trimethylchlorosilane (TMCS) as silylating agent. Xerogels were obtained by conventional evaporating the liquid phase from non silylated gels. The samples were characterized by nitrogen adsorption and small angle X-ray scattering (SAXS). The structure of the wet gels and of the aerogels prepared with the surfactant exhibited characteristics of mass-fractal structures with fractal dimension D in the range 2.1-2.2 for the wet gels and 2.3-2.4 for the aerogels. The characteristic size  of the fractal domain reduces while the size a0 of the primary silica particle composing the fractal structure increases with the drying of the gels, in a process in which share of the porosity is eliminated. Aerogels exhibited typical values for the specific surface of 900 m2g-1 and of 3.5 cm3.g-1 for the total pore volume. These values are correspondingly comparable to those of the aerogels prepared by supercritical drying, since the silylation process replaces hydrophilic –OH groups by hydrophobic –Si-R3 ones, inhibiting the porosity elimination on drying. The silica particle size also increases lightly with the silylation because the attachment of the –Si-R3 groups on the silica surface. The pore size distribution curves of the aerogels are similar for all samples exhibiting a maximum in around 40 nm, independent the concentration of surfactant. This suggests that the characteristic size of 40 nm is due to the association of surfactant micelles... (Complete abstract click electronic access below)

O Sistema de Gestão Ambiental e sua contribuição socioambiental para a biblioteca central da UNESP, Campus Rio Claro/SP

The minimization and mitigation of environmental impacts caused by the activities of organizations is increasingly becoming a key concern due to factors such as market demand, including suppliers and consumer markets, quality standards and even marketing strategies. The implementation of an EMS - Environmental Management System - allows the organization to achieve the level of environmental performance for its determined and promotes continuous improvement over time. This system consists of a schedule of activities, so as to eliminate or minimize impacts to the environment through preventive actions. It also provides a structured approach to set and achieve goals and objectives, and to establish procedures, work instructions and control, ensuring that the implementation of the policy can become reality. The objective of this work consists in planning a system using environmental management based on the ISO 14001 - standard internationally more widespread and accepted in the requirements to establish and operate an EMS - the Central Library, UNESP, Rio Claro / SP to stimulate the quest for continuous improvement and sustainability in the educational institution. For making the diagnosis of this planning was used the PDCA methodology, suggested by the standard, as well as all requirements for compliance. The results show that the benefits that the organization will receive involve reducing expenses and cost of energy and water, and improve the organization's reputation before the whole university and other educational institutions, reaching about three thousand people on university

Um Modelo Espacial para a Resposta Imunológica Adaptativa da Hepatite B

This paper proposed a two-dimensional spatial model to describe the adaptive immune response for viral hepatitis B. This model considered six populations: healthy hepatocytes T, infected hepatocytes Y , hepatitis B virus V , innate immune system I, active immune system X and memory cells, X. First, a compartmental model was constructed and its equilibrium solutions and also the threshold values related to the stability of each solution were obtained. Using this model, we was able to reproduce the different trends observed for the disease, which are: individuals that eliminate the infection without forming immune response, patients with acute and chronic carriers. By including dispersion of defense cells of the immune system and virus (spatial model), we analyze two situations: homogeneous model, in which the model parameters are the same at all points of the network, and heterogeneous model, which characterizes cells more permeable and less permeable to virus invasion. For the two spatial models (homogeneous and heterogeneous) the times relatead to the viral erradication and/or virus invasion and persistence becoming smaller in relation to the compartmental model. The results also showed that for the set of values used in the simulations and if the two diffusion rates are different from zero, the model is sensitive to variations in the rate of viral spread and not dependent on the dispersion of memory cells. Finally, the heterogeneous model when compared to the homogeneous model shows that the infection can be spatially limited depending on the type of the cell involved in the infection process

A aplicação da teoria do lean seis sigma na prestação de serviços no setor agrícola

This thesis aims to analyze the applicability of Lean Six Sigma and DMAIC to improve processes focused on agriculture. We discuss the origins of each system separately, Lean Manufacturing, the Toyota plants in Japan, and Six Sigma, by Motorola in the U.S., and then appears to merge them and can meet their complementarities and synergy between their tools. Finally, we describe a case study focused on the harvesting department, applicable to all types of manuals crops, covering the production of fruits, vegetables and greens. This study shows the ability to reduce costs, increase productivity and elimination of defects that the methodology developed with the fusion of Lean Manufacturing with Six Sigma allows

Produção de biofilme por bastonetes gram negativos isolados de água de hemodiálise

No Brasil, 90% de pacientes com insuficiência renal crônica ou aguda dependem dos procedimentos de hemodiálise para remover produtos de degradação metabólica, excesso de água e de sais minerais do organismo, a fim de restaurar o equilíbrio ácido-base e eletrolítico. Entretanto, o processo de osmose reversa, que visa remover todos os íons da água, também remove o cloro, que exerce efeito bacteriostático sob diversas bactérias autóctones, que passam a se multiplicar na água. Entre os principais grupos dessas bactérias, estão os bastonetes Gram negativos não fermentadores (BGN) e os mais frequentemente associados a bacteremias, em pacientes de hemodiálise são Pseudomonas aeruginosa, Stenotrophomonas maltophilia e Burkholderia cepacia. Essas bactérias podem produzir biofilmes, o que torna sua eliminação do encanamento quase impossível. Assim, o objetivo do trabalho foi a análise de água e do dialisato, da Unidade de Hemodiálise de um Hospital Universitário, na pesquisa dos três BGNs citados. Também foram utilizadas 42 cepas previamente isoladas do mesmo local. Entre as 67 amostras de água, foram isoladas 8 cepas de Pseudomonas aeruginosa e as 50 cepas foram submetidas à pesquisa do gene rpoS, um dos responsáveis pela produção de biofilme. Esse gene foi observado em 20 (40%) cepas, sendo 16 (80%) P. aeruginosa, seguida por 3 (15%) cepas de S. maltophilia e 1 (5%) de B. cepacia. Essas cepas foram submetidas à produção de biofilme a 35ºC (temperatura ótima de crescimento) e a 20ºC (temperatura média da água no encanamento da Unidade de Hemodiálise), em aço inoxidável (material de muitos instrumentos cirúrgicos), PVC (matéria prima da tubulação) e plástico de poliestireno (capacidade de produção de biofilmes em diferentes materiais). Em poliestireno, somente 1 (5%) cepa de P. aeruginosa produziu biofilme a 35ºC e a 20ºC, 2 (10%) cepas foram... (Resumo completo, clicar acesso eletrônico abaixo)

Diagnósticos de Enfermagem Prevalentes de Pacientes em Pós-Operatório de Cirurgia Bariátrica em uma Unidade de Terapia Intensiva

The goal of this study is to characterize the clinical outline of patients in postoperative of bariatric surgery attended in an Intensive Care Unit and identify the nursing diagnosis presented by these patients in accordance to Taxonomy II of North American Nursing Diagnosis Association (NANDA). This is a transversal, descriptive and prospective study that was desenvolved at the Intensive Care Unit of the Clinical Hospital of Botucatu Medical School – UNESP. The population was composed by all the patients who were submitted to the bariatric surgery and were attended at the Intensive Care Unit in the period between June and August of 2010, totalizing 13 patients. The data were collected based on the Nursing History that is composed by the Anamnesis, Physical Examination and Complementary Exams. The results were worked out: a) among the 13 patients studied, 10 are women (76,9%) and 3 men (23,1%); the majority is between 30 and 40 years old; 11 people of 13 are morbid obese, which means that they have Body Mass Index higher than 40 kg/m2; b) It was identified 22 nursing diagnosis and 14 of these were found in 100% of the patients. They belong to the dominions of Activity/Rest, Comfort, Elimination and Changing, Security and Protection, Functions and Relationships. Therefore, in relation to the factors, it was conclude that nursing diagnosis help nurses to understand the unsettled human answers or the risks to disturbance in an individual way, which contributes to plan specific interventions to these patients. It was possible to verify that the stage of the nursing diagnosis that is part of the nursing process should be executed by the nurses systematically, because it has been realized by the nurses’ clinical idea, but not in a systematical way

Atividade antibacteriana de plantas do cerrado da região de Botucatu - São Paulo

The studies related to research on new antimicrobial products have received special attention from researchers, especially given the emergence of microbial strains resistant to conventional antimicrobials. Thus, the present study was aimed to test the antimicrobial action of hydro-alcoholic extracts of plants collected in Cerrado region of Botucatu, following the species: Achyrocline satureioides (Lam) DC (macela), Stryphnodendron adstringens (Mart) Coville (barbatimão), Miconia rubiginosa (Bonpl.) DC (quaresma-branca), Davilla elliptica A. St-Hil (lixinha), Siparuna guianensis (negramina) e Solanum lycocarpum A.St-Hil (lobeira). The plants were always collected in the morning, in areas near the town of Botucatu, and extracts were prepared using a solvent such as methanol 70% from materials dried (50°C) and ground into mill knives. The extraction was performed for 48 hours at refrigerator temperature, followed by filtration, removal of methanol solvent in a rotary evaporator, determination of the dry weight of the extracts (mg / mL) and phytochemical analysis of the same. The sensitivity tests for 10 S. aureus, 11 E. coli and 11 P. aeruginosa, isolated from human clinical cases were performed by diluting volumes of the extracts in Mueller Hinton Agar (MHA) and determination of minimum inhibitory concentration (MIC) (mg / mL). According to the results and statistical analysis, it was found that depending on the bacteria tested, and in descending order of antibacterial activity for S. aureus: Lixinha sheet > Barbatimão sheet > Quaresma-Branca > Macela > Lixinha fruit > Barbatimão shell > Lobeira > Negramina; E. coli: Lixinha sheet > Barbatimão sheet > Lixinha fruit = barbatimão peel > Quaresma-Branca > Macela = Lobeira > Negramina and P. aeruginosa: Lixinha leaf > Barbatimão bark > Barbatimão leaf > Lixinha fruit > Macela > Lobeira > Quaresma - Branca = Negramina... (Complete abstract click electronic access below)

Estudos das condições da disposição final de resíduos sólidos domiciliares no aterro sanitário de Cachoeira Paulista – SP

In this assignment, will be assessed the conditions of operation for the final disposal of household solid waste landfill in the city of Cachoeira Paulista-SP. The theme chosen for research is of great social importance therefore is directly related to the well-being of the people, sustainable development, environmental protection and public health. Everyone should be aware of the problems related to improper final disposal of solid waste of any kind. The objectives of the study were: analyse the conditions of operation of the landfill; verify the treatment technology of percolating liquids (slurry) generated in the landfill; examine whether the landfill obey the rules; which cities in the region depend on the disposal system, verify that there are flaws in the final destination of solid waste in the municipality and in the cities of the region. The research is primarily a bibliographic review, obtained by querying the database and virtual libraries. Technical visits were also held at the study site, to check spot the methodology employed in the operation of landfill This work concluded that for the period under study, the landfill was as a landfill site, therefore, in accordance with the rules of operation

Redução do tempo de setup de máquinas de usinagem em uma industria automobilística

Continuous improvement of industrial processes is one way to become companies more competitive in the market. For this, a fairly widespread use is the methodology of lean production systems, by eliminating waste. One of the tools of these systems is the method of rapid exchange of die or also called SMED, which will be applied in this study. The study aims to develop proposals for reducing the time of set up of two machines in two machining lines, watching also the ergonomics and safety conditions in this operations. The set up time reduction is justified among others, due to increase the machine productivity. In applying the connecting rod machining line, there were two types of exchange. Reductions in time to set up proposals reached values of 47% to one of them, and 55% to the other. It is important to underline that to reach this result, there was no need for large investments. In the application in block machining line, was developed an improvement in the ergonomic area. It was placed a pulley block that came to increase the time of tool change. Aiming to improve the security of the exchange, without productivity loss, the method was applied to reduce this time. It was developed two proposals.: the first would reduce that time by 19%, and does not require many resources of the company. The second involves the parallelization of the exchange, so that the reduction is 48%. However, this proposal requires one more manpower at the time of exchange and it is not always possible

Indicação e avaliação de potenciais áreas para implementação de aterros sanitários municipais – Apuí/AM

About eighty percent of the Brazilian municipalities have their residues in environmentally unsuitable sites and socially insalubrious. In this context, in the year 2010, instituted the National Policy on Solid Residues, which aims to integrated management and management environmentally appropriate of solid residues in Brazil (JUCA, 2002).The problem of urban residues is related to its origin and production in the same way that the concept of inexhaustibility and reflexes of compromising the environment, especially the pollution of soil, air and water resources (LIMA, 1995). Seeking a better residues management in the municipality of Apuí / AM and continuing work already started, Plan Solid Residues Management of the Apuí / AM, this work came to propose a better environmental compliance in relation to solid residues compared to 12305/2010 law that established deadlines / timelines on some actions such as landfills and the consequent elimination of environmentally sound disposal of residues by 2014 and thus began a study of potential areas for the implementation of the landfill were evaluated taking into consideration technical aspects (soil, vegetation, climate, hydrography, etc), legislation and Google Earth imagery. The result of the work over the 6 areas proposed by the City Hall was the choice of AREA 4 as the most indicated for the implementation of the landfill for the city of Apuí, which has 18,325 inhabitants (IBGE, 2011); some considerations were made if a new area can be proposed by the city to implement the landfill

Coleta e estratégia simplificada de tratamento de água de chuva para fins não potáveis com ênfase no uso industrial

Este projeto investigou alternativa de tratamento simplificada para fins não potáveis para aplicação em escala industrial. É neste contexto que esta pesquisa alojou sua importância – nas possíveis estratégias de tratamento, em especial na utilização de sistema contendo filtro de pressão e no uso do amido natural de milho como coagulante, auxiliando no processo de filtração, visando aumento da segurança sanitária e da qualidade da água de chuva disponibilizada para aproveitamento. A hipótese do trabalho foi investigar a possibilidade da diminuição ou até eliminação do volume de água descartada na operação de abstração da primeira chuva. Para tal, foram realizados ensaios em escala de laboratório com uma precipitação coletada nos dias 10/03/08 e 03/04/2008. Os resultados da estratégia de tratamento delineada foram comparados com os obtidos pela estratégia convencional com descarte de 1,5 mm da primeira chuva, o que corresponde a um volume de 558 L de água de chuva. Utilizou-se a dosagem de 6,0 mg/L para fim de comparação com a água bruta, sem nenhum tratamento, e com a água somente filtrada. Os resultados não confirmaram a hipótese de que o tratamento com amido natural permite eliminar a etapa de abstração da primeira chuva, porém, vale ressaltar que a qualidade da água coletada já era muito boa previamente ao tratamento. Merece destaque o fato de que a amostra de precipitação submetida aos ensaios apresentados foi coletada em período de freqüente precipitação e, embora tenha sido observado o interstício de 3 dias consecutivos de estiagem a qualidade da água de chuva coletada pode ser considerada boa (34UH de cor aparente; 8,84 UT de turbidez e 238,2 (NMP) de coliformes totais e 3 (NMP) de coliformes termotolerantes). Acredita-se que, para o caso de precipitações ocorridas após longo período de estiagem, a necessidade de tratamento... (Resumo completo, clicar acesso eletrônico abaixo)

Avaliação da apoptose e resposta Th17 em modelo murino de esporotricose

Pós-graduação em Biociências e Biotecnologia Aplicadas à Farmácia - FCFAR

Analise microbiológica da flora intestinal do mosquito Aedes Aegypti através do sequenciamento do gene 16S rRNA na plataforma Illumina MiSeq

Dengue é uma arbovirose que afeta cerca de 100 milhões de pessoas anualmente, em mais de 100 países situados nas regiões tropicais e subtropicais. Foi considerada a doença viral que mais cresceu no ultimo ano, repercutindo em impactos sociais e econômicos nas regiões endêmicas devido às altas taxas de morbidade e mortalidade desencadeadas pela infecção. O principal vetor da dengue é o mosquito Aedes aegypti, presente em toda a faixa tropical e subtropical. Por apresentar hematofagia antropofílica, rápido desenvolvimento e características comportamentais especificas, é um excelente transmissor do vírus dengue. Medidas de controle da disseminação da dengue são restritas à eliminação do mosquito vetor, e um tratamento específico ainda não foi desenvolvido, bem como a criação de uma vacina que previna simultaneamente a infecção pelos quatro sorotipos do arbovírus. Uma característica que determina a disseminação de doenças é a alta competência vetorial de seus mosquitos transmissores, que tem sido associada à composição da microbiota intestinal do inseto. As bactérias presente no intestino do mosquito exercem funções relacionadas a sua nutrição, desenvolvimento e reprodução, e são também um importante fator na eliminação de patógenos, por interferirem diretamente na atividade viral, ou indiretamente a partir da ativação das vias antivirais pelos micro-organismos. Dessa forma, este trabalho visa estudar a diversidade microbiana intestinal do mosquito Aedes aegypti em diferentes estágios de vida, através de sequenciamento de última geração com a plataforma MiSeq Illumina

Aplicação de princípios do pensamento enxuto no processo de envio e devolução de correspondências em um banco privado

The success obtained by the Toyota Company in implementing the Toyota Production System was a global case of study that generated different new approaches, such as Lean Thinking. This approach was already successfully applied to various sectors, breeding methodologies as Lean Service, Lean Office or Lean IT. In this paper, the main concepts of Lean Thinking were applied in an information flow through an action research, more specifically in the sending and return of mailing process from a bank. The objectives were to create changes that led to the decrease of the mail returning indexes and ultimately to cost reduction and waste elimination. For this purpose the actual situation was mapped, and after data collection and analysis, a future proposed state was generated for the information flow. Alongside, indicators were conceived for managing process control and a set of implemented and proposed improvements were delivered. The applied Lean Thinking concepts were considered efficient for the application, and the proposed objectives were achieved

Aumento de produtividade em uma célula produtiva com processo de usinagem utilizando conceitos Lean

In the current competitive and global scenario, companies in search for solutions that become the production every time more efficient is increasing and at the same time cost reductions and cost eliminations are becoming increasingly evident and needed. In an attempt to improve production, this work aims to compare benefits obtained using principles of philosophy Lean Manufacturing in an productivity growth of a cell from an auto parts sector industry. For that purpose it will be studied the history, the concepts and the tools of philosophy Lean Manufacturing, thus using the as a business-strategic tool to accomplish goals that the company expects to get greater competitiveness and quality. The efficiency of philosophy Lean Manufacturing was already confirmed through applying the concepts in the process which has been improved inside an auto parts sector industry. At last, comparative analyzes showed benefits obtained with the use of Lean Manufacture tool called VSM, Value Stream Map, which translates the Value Stream Map of a particular family of parts as the identification, minimization and elimination of waste identified