837 resultados para Eficiência


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Evaluated the evapotranspiration (ETc) and the efficiency of water use (USA) by the fig tree 'Purple Valinhos' submitted to irrigation and mulching (bagacilho of sugar cane crushed) in the first production cycle, at conditions of Botucatu, St. Paul. We used the method of soil water balance and to obtain the reference evapotranspiration method was used Montheit FAO Penman 56. For the assessment of crop coefficients (kc) we adopted the following phenological distribution: phase 1 - between transplanting and 20% of the vegetative (DV), ii) phase 2 - 20 to 80% DV, and iii) phase 3 - fruiting. Observe the cumulative ETc 409.4 and 465.8 mm in 254 days after transplanting (DAT) and averages of 1.47 and 1.67 mm day(-1), with and without mulching (CC and SC). The crop coefficients (kc) mediums were 0.16, 0.43 and 0.49 for SC and 0.18, 0.44 and 0.50 for CC, in phases 1 and 3, respectively. The EUA values decrease with increasing the volume of water received and ranged between 1.65 and 3.32 kg of green figs per m(3) of water for irrigated SC and CC.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Horticultura) - FCA

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEB

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A remoção da smear layer é um procedimento importante para a regeneração periodontal e para o tratamento da sensibilidade dentinária. Diversos tratamentos tem sido realizados para sua remoção, porém, mostrando resultados conflitantes ou insatisfatórios. No presente estudo nos propomos a analisar através do microscópio eletrônico de varredura a eficiência dos detergentes: lauril sulfato de sódio, Plax e de mamona assim como o EDTA 24% na remoção da smear layer. Todos os produtos testados foram aplicados com bolinha de algodão, renovada a cada 30 segundos, a qual era esfregada na superfície radicular por diferentes períodos. As fotomicrografias foram analisadas através da aplicação de um índice de remoção da smear layer por três examinadores calibrados e os resultados analisados estatisticamente. De acordo com nossos resultados pudemos chegar as seguintes conclusões: 1- a instrumentação com curetas de Gracey provocou a formação da smear layer; 2- o detergente lauril sulfato de sódio não removeu a smear layer, tendo sido o pior resultado entre os detergentes testados; 3- Os detergentes Plax e de mamona mostraram resultados semelhantes entre si e superiores ao controle negativo e ao lauril sulfato de sódio, porém, não removeram a smear layer satisfatoriamente; 4- O EDTA 24% neutro mostrou ser eficiente para a remoção da smear layer.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this study was to evaluate gas exchange and photochemical efficiency of cotton cultivars under leaf application of silicon. Therefore, the experiment was conducted in a completely randomized in a factorial 3 x 5, three cotton cultivars ('BRS Topazio', 'BRS Safira' and 'BRS Rubi'), five silicon concentrations (0, 50, 100, 150, 200 mg L-1) and four replications. Gas exchange and photochemical efficiency were determined by measuring the rate of CO2 assimilation, transpiration, stomatal conductance, internal CO2 concentration, instantaneous efficiency in water use, instantaneous carboxylation efficiency, initial fluorescence, maximum quantum efficiency of the variable and photosystem II (PSII). The data variables were subjected to analysis of variance and regression test comparison of means. There were significant differences in gas exchange and photochemical efficiency in response to concentrations of silicon. There were also significant differences among cotton cultivars evaluated. In cultivar 'BRS Top zio', the application of silicon increased CO2 assimilation rate and quantum efficiency of PSII. In 'BRS Safira' silicon reduced the rate of assimilation and internal CO2 concentration. In 'BRS Rubi' element increased the fluorescence of chlorophyll 'a' and quantum efficiency of photosystem II, and reduced the rate of assimilation and internal CO2 concentration and stomatal conductance. Silicate fertilization provided 'BRS Topazio' to express better photosynthetic rate in relation to 'BRS Safira' and 'BRS Rubi'. No damage occurred in PSII when 'BRS Top zio', 'BRS Safira' and 'BRS Rubi' cultivars received silicon as supplementary nutrition.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study aims to assess the implementation of Lean Six Sigma in the preparation of plates and hot lamination process for a company of aluminum rolled products, to improve the quality, productivity and process efficiency. As a basis for achieving these goals, the DMAIC methodology and various quality tools such as Cause Effect Diagram, Process Flow, SIPOC, Pareto, FMEA and Control Chart were used, trying to propose improvements to processes and increase their efficiency. The results were significant and were the basis for the continuation of a continuous improvement project throughout the factory

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Energy efficiency has gained significant importance in recent years, mainly due to cyclical climatic conditions and current supply of natural resources. The present work deals with the procedures and requirements necessary to evaluate a building to a level of efficiency corresponding to your project and the actual implemented. To perform this analysis, we adopted the technical regulation efficiency prepared by Procel along with other agencies of the sector. The Regulation aims to create a model for the technical evaluation of the efficiency of buildings, popularize and expand the theme specification of conditions drawn up today. The building analyzed in this study was the library of UNESP, Guaratinguetá. Still, after the completion of the final efficiency analysis, are presented proposals for intervention that can improve and enhance the present situation of the building. The interventions are based on many technical factors and local conditions of climate and supply of resource. The issue of sustainability was explained in order to serve as a tool to expand the options available to upgrade a building in front of their impact on the environment

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In wood processing industries, which use electrical equipment in the production process, in most cases these are badly scaled or operate under inadequate conditions, resulting directly in industrial energy efficiency, which proves important because besides having technological innovation, also with practices and policies, aims to decrease power consumption. So in a wiring project should take into account the variables that influence energy efficiency. Thus this work has been reviewed and subsequently calculated some of these variables, such as active power, power factor and demand for the entire industry (global) and also for specific equipment, the chipper. The network analysis was performed in a wood processing industry in the city of Taquarivaí - SP, and evaluated these variables with a network analyzer and also by analysis on energy bills, which were found in both analysis levels below those found in literature. These factors are due to poor design, improper use, storage of equipment or even by characteristic of the production process, ie, the equipment running on empty because of the volatility of production

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O estudo foi realizado numa área degradada pertencente ao campus da UNESP em Rio Claro, e teve como objetivo avaliar a eficiência do método de nucleação para recuperação de áreas degradadas do tipo “transposição de galharia” na atração de fauna. As pilhas de galhos podem funcionar como abrigos artificiais, atraindo potenciais dispersores de sementes secundários, o que potencialmente abreviaria o processo de regeneração de um ambiente degradado. O estudo foi feito através do levantamento de pequenos mamíferos por armadilhas de interceptação e queda em quatro parcelas de 2500 m², sendo duas delas com o tratamento (pilhas de galhos), e duas funcionando como controle, e o resultado esperado seria uma maior quantidade de indivíduos capturados e de gêneros taxonômicos nas parcelas com o tratamento. Entretanto, as quantidades totais de indivíduos capturados no bloco das parcelas com tratamento e no bloco das parcelas controle foram, segundo o teste de Mann-Whitman, estatisticamente idênticos. Também a quantidade de gêneros taxonômicos capturados foi igual nos dois blocos. Desta forma, concluímos que o método “transposição de galharia” foi ineficiente neste estudo, da forma como foi empregado, não contribuindo para um aumento na fauna de pequenos roedores e marsupiais. O método pode ter fracassado devido a pequena quantidade de pilhas de galhos utilizados para o tamanho da área, como também pelo recobrimento da área por uma grande quantidade de gramíneas, que podem ter funcionado por si só como abrigo para os animais capturados, além de poderinibir a entrada de outros gêneros de pequenos mamíferos não-voadores. Sugerimos portanto, para o método ser mais eficiente, a colocação de uma maior quantidade de pilhas de galhos do que a utilizada no presente estudo, e elas devem ser maiores. Para ecossistemas que apresentam gramíneas densas e altas... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nowadays, there is a need for improvements in production processes for companies to be competitive, as it is an obligation of businesses, it is necessary to know about the production processes accurately, to learn where improvements in work and thus have large impacts results. The calculation of efficiency of production lines is necessary to know as much about the progress of production and for product costing, when the measurement is not suitable, it generates negative impacts on the company. Due to the impact generated by this parameter, the graduation work carry out the study of change in a method that does not include all requirements necessary, by another method known as Overall Equipment Effectiveness, and according to studies, covering various parameters, showing become more consistent. These values are contained in the pattern production which is used to fund the product, thereby also occur financial impacts. Thus the work will study the change along with the analysis of impacts caused by the change

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work contemplates an opportunities study of the rational use of energy in an industrial unity from the demand analysis and electrical energy consumption. Through a guide of energy analysis it was described how to find the main problems that create energy wastes in an industry, showing the ways so the production processes avoid such wastes and start to use energy in a more sensible e efficient way. It was also studied, the technical e economical viability of possible interventions to be implemented in terms of energy conservation and of possible demand supply alternatives