840 resultados para ENERGY SOURCES
Resumo:
The present study aimed to analyze indicators of energy efficiency and economic production of piglets from family farmers in Paraná. We sought to determine possible differences in energy efficiencies and economic producers who manufactured rations on their property and those who bought rations Cooperative. The sample was obtained by accessibility (six producers who manufactured and six who bought rations) and not probabilistic, and the raw data were transformed into energy and economic units, and processed in electronic spreadsheets. The two production systems of piglets in the nursery phase, family farming, showed negative energy balance, with energy inputs higher than outputs. The two systems of rearing piglets showed no differences in energy efficiency, ie, they were not self-sufficient and needed to import energy sources from other systems. The indicators of economic efficiency of producers who buy rations as those who produce them in their properties were less than unity. Thus, most producers did not generate enough revenue to pay the costs in the short term and lost money.
Resumo:
The study aimed to analyze the energy and economic efficiency rate family farms producing milk in the county of Pardinho, Sao Paulo State. The criteria used to define producers in this study is that outlined by the Brazilian agricultural credit system FEAP (Fund Expansion of Agribusiness Paulista). Through primary data, obtained by verbal reports, the agroecosystem technical itineraries were re-established, detailing the process applied, machinery, implements, equipment, supplies and manual work. These were transformed into energy and economic units, which allowed determining the established connection between energy economics outputs and inputs. The hypothesis of this study is that the energetic expenditure may be coincidental with economic expenditures. The energetic and economic flows were analyzed, using a structure of expenditures, by type, source and form of gross energy, as well as the energetic point of view. Four producers were found to have different technical itineraries. Producers 1 and 2 achieved the highest energy and economic efficiency rates. The producer with the lowest efficiency rates was producer 4. The energy sources not renewable like chemical fertilizers were the most used reaching an average of 82.9% for the energy and 52.86% for the economic expenditures. When comparing energy and economic efficiency it is possible to verify that both forms of analysis are close, obtaining a broader idea about energy resources allocation.
Resumo:
The sugarcane industry has been important in the Brazilian economy since the colonial period. The search for alternative energy sources has gained more prominence, by offering a product generating clean energy. With the opening of the Brazilian economy, the sector has undergone transformations operating in a free market environment requiring greater efficiency and competitiveness of those involved in order to stay in business. This scenario is producer/supplier independent, and social aspects related to their stay in the market. Although its share in sugarcane production is smaller than the plant itself, it is still considerable having reached around 20% to 25% in 2008 by employing labor, also production factors had an important economic impact in the regions where they operate. Therefore, this study aimed to estimate the economic efficiency and production of independent sugarcane producers in the state of Paraná through the DEA model. The Data envelopment analysis (DEA) is a nonparametric technique that, using linear programming constructs production borders from production units that employ similar technological processes to transform inputs into outputs.The results showed that of the total surveyed, 13.56% had maximum efficiency (an efficiency score equal to 1). The average efficiency under variable returns to scale (BCC-DEA) was 0.71024. One can thus conclude that for the majority of the samples collected, it might be better use of available resources to the in order to obtain the economic efficiency of the production process.
Resumo:
The objective of this work was to evaluate the energy and economic efficiency indexes per unit of cotton agro-ecosystem area in family production systems of Paraguay and Brazil; and, to establish a relationship between the energy and economic. Typologies presented by the Program to Support Small Cotton Holdings (Paraguay), and by the National Program for Strengthening Family Agriculture (Brazil). Family systems of the two countries were identified; these are located from Paraguay (San Juan–CA) and from Brazil (Leme–SP). To construct the energy expenditure structure of the cotton agro-ecosystem, as well as to assess the economic efficiency, the mean values obtained were considered, when they presented similarities in production systems and they were within the typology proposed in this study. From the technical itinerary observed the Paraguayan agro-ecosystem depended (fossil fuel 56.76%) and industrial source (35.99%). Thus, the energy balance of the agricultural stage was established, which attained a value of 17,740.69 MJ ha-1; an energy efficiency of 5.28, and a cultural efficiency of 3.04. The Brazilian agro-ecosystem depended on energy from industrial source (insecticides 39.82%) and from fossil fuel (33.59%); it reached an energy balance of 19,547.88 MJ ha-1; an energy efficiency of 2.12, and a cultural efficiency index of 0.71. In the economic and energy indicator ratio, with regard to the months referring to the harvest time, that is to say, March, April, and May, the maximum economic efficiency indicator of paraguay was attained in the month of May (1,00), and from Brazil in the month of May (1,71). Both production systems analyzed were presented efficient, however, dependent of external circumstances and non-renewable energy sources.
Resumo:
The objective of this work was to evaluate the energy and economic efficiency indexes per unit of cotton agro-ecosystem area in family production systems of Paraguay and Brazil; and, to establish a relationship between the energy and economic. Typologies presented by the Program to Support Small Cotton Holdings (Paraguay), and by the National Program for Strengthening Family Agriculture (Brazil). Family systems of the two countries were identified; these are located from Paraguay (San Juan–CA) and from Brazil (Leme–SP). To construct the energy expenditure structure of the cotton agro-ecosystem, as well as to assess the economic efficiency, the mean values obtained were considered, when they presented similarities in production systems and they were within the typology proposed in this study. From the technical itinerary observed the Paraguayan agro-ecosystem depended (fossil fuel 56.76%) and industrial source (35.99%). Thus, the energy balance of the agricultural stage was established, which attained a value of 17,740.69 MJ ha-1; an energy efficiency of 5.28, and a cultural efficiency of 3.04. The Brazilian agro-ecosystem depended on energy from industrial source (insecticides 39.82%) and from fossil fuel (33.59%); it reached an energy balance of 19,547.88 MJ ha-1; an energy efficiency of 2.12, and a cultural efficiency index of 0.71. In the economic and energy indicator ratio, with regard to the months referring to the harvest time, that is to say, March, April, and May, the maximum economic efficiency indicator of paraguay was attained in the month of May (1,00), and from Brazil in the month of May (1,71). Both production systems analyzed were presented efficient, however, dependent of external circumstances and non-renewable energy sources.
Resumo:
This paper presents the application and use of a methodology based on fuzzy theory and simulates its use in intelligent control of a hybrid system for generating electricity, using solar energy, photovoltaic and wind. When using a fuzzy control system, it reached the point of maximum generation of energy, thus shifting all energy generated from the alternative sources-solar photovoltaic and wind, cargo and / or batteries when its use not immediately. The model uses three variables used for entry, which are: wind speed, solar radiation and loading the bank of batteries. For output variable has to choose which of the batteries of the battery bank is charged. For the simulations of this work is used MATLAB software. In this environment mathematical computational are analyzed and simulated all mathematical modeling, rules and other variables in the system described fuzzy. This model can be used in a system of control of hybrid systems for generating energy, providing the best use of energy sources, sun and wind, so we can extract the maximum energy possible these alternative sources without any prejudice to the environment.
Resumo:
The aim of this work was to proceed, from the energetic point of view, an analysis of a corn agroecosystem, on the direct planting, located at Pirituba II rural workers placement project, Área III, city of Itaberá/SP. The energetic analysis mesured all operations, together with its fisical demands, the inputs and produced grains, classifying them within their respective flux, based on the definition of energy inputs and outputs, converting them into energetic equivalents and, so, determining the energetic matrix of de agroecosystem. The caloric index used were cultural efficiency and cultural liquid energy. The results showed the dependence of the studied systems on the chemical energy sources, from fertilizers (39,49%), agrotoxics (27,74%), and fossile energy of diesel (24,94%). The energetic values of the direct and indirect energy showed a very big difference between them, what means that the energy sources used in the system are not balanced. The cultural efficiency found was 12,86 and cultural liquid energy got to 115.025,92 MJ x ha-1. Later on, obtained data was compared to already existing data in Bueno (2002), who researched conventional planting system. The cultural inputs of both systems were energeticaly different: 9.696,97 MJ x ha-1 (direct planting), e 8.783,78 MJ x ha-1 (convencional planting). The outputs had very different results: 124.722,89 e 79.118,38 MJ x ha-1, respectively. So, we had much more cultural liquid energy on the studied system: 115.025,92 MJ x ha-1, compared to convencional system: 70.334,60 MJ x ha-1. The energectic loss of nitrogened fertilizers contributed for the high energetic loss of both energetic studied matrices. There are few contribution from biological energy source in both systems.
Resumo:
Pós-graduação em Engenharia Elétrica - FEIS
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The current socio-economic situation has brought a need to look for alternative ways to get energy that allow reducing the high dependence on fossil fuel sources while deflect from the climate change arising from the result of the use of these energy resources. Renewable sources of energy, low and medium temperature appear as high potential of energy resources, which have a major influence on the way of life of the people to enable decentralized energy production. In Brazil, in particular, have also the need to decentralize the energy grid, currently focused on energy from water source. The current water crisis, exemplifies the urgency of betting on other energy sources, as a way to help in emergency situations such as the current one. Therefore, this study evaluates the possibility of using biomass as a heat source in a Rankine Cycle Organic where instead of water; it uses thermal fluid as working fluid, was compared the urban areas of the city of Guaratinguetá with the urban area of the metropolitan region of São Paulo. Thus, it was established two scenarios, so it was possible to establish the cycle to be used
Resumo:
In order to diversify the global and national energy matrix and reduce harmful impacts on the environment caused by the emission of polluting gases into the atmosphere, the use of clean and renewable energy sources is presented as a good alternative. This work discusses the use of photovoltaic solar energy, a source that presents such characteristics. The photovoltaic system under study is the type distributed connected to the grid, in the residential segment. It is informed of its use in the global and national levels. They are also present their characteristics, electrical and electronic circuits that make up the equipment required for its operation and the design of a system to be installed in a residence
Resumo:
Despite the growing concern in seeking more sustainable energy sources, oil demand is likely to grow in coming years. To keep up with this growth, the oil industry has increasingly invested in innovation and efficiency. Knowing that, new technologies have been developed to explore deeper waters, without giving up the best practices in worldwide operational safety. The use of rigid pipelines in deepwater offshore facilities is increasing quickly and because of this, the ways of storing and launching pipe have been studied and perfected. In this paper the Bauschinger effect on API 5L X70 steel was analyzed proving that there was a reduction in yield strength when an effort was applied in a previous direction, then an effort was then applied in the opposite direction. To observe this phenomenon, the tensile test was conducted to determine the mechanical properties of the base metal, such as yield stress, tensile strength, elasticity and maximum tensile, so then compare it with the results obtained in the Bauschinger Effect Test. The analysis results showed that the steel had high resistance, with good plastic deformation capacity without failing, well-defined yield point, showing itself appropriate for the operation of oil and gas pipes
Resumo:
Given the current energy crisis experienced in our country with the lack of rain in some areas, the energy distributors were forced to resort to thermal power plants to complement their energy production; raising the cost of electricity generation, they have been forced to repass this value to the customers through the Tariff Flags. Concerned about a substantial increase in their electric bill, some consumers were forced to look for alternatives so that their results are not affected. The use of diesel generation at peak hours is a relatively simple and inexpensive alternative that has been widely used for several industrial, commercial and service customers. In this present work, we conducted a feasibility study of the use of diesel generators at peak hours in a medium-sized hospital, calculating the depreciation period for the investment through savings in electricity bills
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The current socio-economic situation has brought a need to look for alternative ways to get energy that allow reducing the high dependence on fossil fuel sources while deflect from the climate change arising from the result of the use of these energy resources. Renewable sources of energy, low and medium temperature appear as high potential of energy resources, which have a major influence on the way of life of the people to enable decentralized energy production. In Brazil, in particular, have also the need to decentralize the energy grid, currently focused on energy from water source. The current water crisis, exemplifies the urgency of betting on other energy sources, as a way to help in emergency situations such as the current one. Therefore, this study evaluates the possibility of using biomass as a heat source in a Rankine Cycle Organic where instead of water; it uses thermal fluid as working fluid, was compared the urban areas of the city of Guaratinguetá with the urban area of the metropolitan region of São Paulo. Thus, it was established two scenarios, so it was possible to establish the cycle to be used