946 resultados para Dispersion of seeds
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
PbMg1/3Nb2/3O3 (PMN) prepared by organic solution of citrates was analyzed by the Rietveld method to determine the influence of seeds and dopants on the perovskite and pyrochlore phase formation. It was observed that pyrochlore phase formation increases with an increase in calcination time when no additives are included during the preparation. It was also observed that a greater amount of perovskite phase appeared in doped or seeded samples. The fraction of perovskite phase increased from 88 mol % in pure sample to ∼95 mol % in doped and seeded samples calcined at 800°C for 1 h. It is clear that the addition of dopants or seeds during PMN preparation can enhance the formation of perovskite phase.
Resumo:
The adaptability of wild coriander (Eryngium foetidum L.) a seasoning and medicinal herb indigenous of the Amazon region was evaluated in a subtropical city of Sao Paulo, Brazil. Germination of seeds was extremely irregular with the first seeds germinating 10 days after the sowing, but the process lasted 90 days. The exploitation of this specie is possible in subtropical conditions without interruption of production but further study on the feasibility elimination of seed and flower are necessary to permit a greater yield of foliage.
Resumo:
The morphologies of nylon 6/acrylonitrile-butadiene-styrene blends compatibilized with a methyl methacrylate/maleic anhydride copolymer, with 3-20 wt % maleic anhydride, were examined by transmission electron microscopy. Some staining techniques were employed for identifying the various phases. The binary blends were immiscible and exhibited poor mechanical properties that stemmed from the unfavorable interactions among their molecular segments. This produced an unstable and coarse phase morphology and weak interfaces among the phases in the solid state. The presence of the copolymer in the blends clearly led to a more efficient dispersion of the acrylonitrile-butadiene-styrene phase and consequently optimized Izod impact properties. © 2003 Wiley Periodicals, Inc.
Resumo:
Nylon6/ABS binary blends are incompatible and need to be compatibilized to achieve better performance under impact tests. Poly(methyl methacrylate/maleic anhydride) (MMA-MA) is used in this work to compatibilize in situ nylon6/ABS immiscible blends. The MA functional groups, from MMA-MA copolymers, react with NH2 groups giving as products nylon molecules grafted to MMA-MA molecules. Those molecular species locate in the nylon6/ABS blend interfacial region increasing the local adhesion. MMA-MA segments are completely miscible with the SAN rich phase from the ABS. The aim of this work is to study the effects of ABS and compatibilizing agent on the melting and crystallization of nylon6/ABS blends. This effect has been investigated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). Incorporation of this compatibilizer and ABS showed little effect on the melting behavior of the PA6 crystalline phase, in general. DMTA analysis confirmed the system immiscibility and showed evidence of compatibility between the two phases, nylon6 and ABS, produced by MMA-MA copolymer presence. The nylon6/ABS blend morphology, observed by transmission electron microscopy (TEM), changes significantly by the addition of the MMA-MA compatibilizer. A better dispersion of ABS in the nylon6 phase is observed. © 2004 Kluwer Academic Publishers.
Resumo:
The present study shows the distribution of alien fish species in tropical lakes in the middle Doce river basin, southeastern Brazil, obtained from a rapid assessment program. The causes for their introductions were sport-fishing improvement in some specific lakes and aquaculture in the studied basin. Presently, these species have a wide distribution occurring in 41 of the 54 lakes studied, representing an actual threat to regional native fish community. The natural connection among lakes and streams during the rainy season and the dispersal mediated by local people are the main invasion agents for alien fishes. The success of these invaders is probably due to absence of pre-existing effective competitors or top-predators in the invaded communities. We consider that the eradication of alien fishes by means of the available management tools may be very difficult due to the large number of lakes invaded and to the wide spectrum of lake conditions and resources exploited by these alien species. We recommend the use of environmental education as a tool to stop the human-mediated dispersion of aliens and to improve conservation of native fish community in lakes where these alien species are not present yet. © 2004 Instituto de Ciências Biológicas - UFMG.
Resumo:
Extracts of different sesame plant (Sesamum indicum, Linnaeus) organs were tested through ingestion and contact experiments to investigate their toxicity to Atta sexdens rubropilosa (Forel) workers. Dichloromethane extracts of seeds were toxic to the leaf-cutting ants and the factor responsible for the toxicity does not show seasonal occurrence.
Resumo:
Extracts of the ripe seeds of the sesame plant (Sesamum indicum, Linnaeus) were tested through contact experiments to investigate their toxicity to Atta sexdens rubropilosa workers. Dichloromethane extract of seeds was toxic to the ants and the factor responsible for this effect was distributed through the ethyl acetate fraction. This fraction was divided into four sub fractions composed of: A) triglycerides, B) monoglycerides + diglycerides + triglycerides, C) diglycerides + sesamoline + sesamine and D) sesamine. However, when these sub fractions were separated, no toxicity was observed. Therefore, in order to determine why the activity was lost, the concentration of each sub fraction was duplicated, and the possible combinations among them were also tested. We concluded that the toxicity to the ants is due mainly to a mixture of triglycerides, and sesamoline or the combination of sesamoline + sesamine can be a synergistic factor in this fraction.
Resumo:
Nylon6 is an attractive polymer for engineering applications because it has reactive functionality through amine and carboxyl end groups that are capable of reacting. For this reason, it has been used a lot in polymeric blends. Blends of nylon6/ABS (acrylonitrile-butadiene-styrene) were produced using glycidyl methacrylate-methyl methacrylate (GMA-MMA) copolymers as compatibilizer. The binary blends were immiscible and exhibited poor mechanical properties that stemmed from the unfavorable interactions among their molecular segments. This produced an unstable coarse phase morphology and weak interfaces between the phases in the solid state. The presence of the copolymer in the blends clearly led to a more efficient dispersion of the ABS phase and consequently optimized Izod impact properties. However, the compatibilized blend showed poor toughness at room temperature and failed in a brittle manner at subambient temperatures. © 2005 Springer Science + Business Media, Inc.
Resumo:
Ipê amarelo Tabebuia chrysotricha (Mart. Ex DC.) Standl. is a native forest species that presents heavy and durable wood: it is common to be used for urban arborization. The species is latte secondary and heliophyta. Occurs from Espirito Santo State until Santa Catarina in the Pluvial Atlantic Forest (Mata Atlântica). The seedling production is hard because their seeds have short longevity after dispersion, and so due to the difficulty to harvest winged seeds that are quickly dispersed by the wind. The present study was carried out to evaluate the physiological maturity of Ipê Amarelo seeds, to establish the best moment to harvest them. The study was to accompany the maturation of 100 fruits in just beginning development, from eleven different trees. Morphological characteristic measures were made weekly, with fruits still on trees, starting from the second week development when fruits presented the following averages: 6.3 cm length, 0.71 cm thickness, and 0.82 cm width. From the sixth week of fruit development we harvest them to proceed the germination test, water content rate, and electric conductivity test. The germination has begun by the seventh week development with 28% of germinated seedlings. The highest germination rate happened by the eighth week development, with 74.5% of germinated seedlings and on the ninth week the rate decrease to 65.5%, when the seeds were already in dispersion. Through the electric conductivity test the highest value obtained was 378.06 μS.g -1.cm -1 on the seventh week development and the lowest one was 183.28 μpS.g -1.cm -1 on eighth week. These results support those obtained in the germination test, because as higher is the electric conductivity of seeds, as higher is their deterioration level. Finally, the study allows concluding that the physiological maturation of ipê amarelo seeds has occurred before dispersion close to the eighth week development when fruits presented the following averages: 22.2 cm length, 1.37 cm width, and 1.05 cm thickness; water content rate was 61.8% and electric conductivity was 183.28 μS.g -1.cm -1. In that moment, the fruits presented greened brown coloration and started to show fissures.
Resumo:
The objective of this work was to establish physical and chemical characterizations of dovyalis hybrid fruits (Dovyalis abyssinica and D. hebecarpa). Samples of 25 fruits were characterized by evaluation of length and width, weight, percentage and number of seeds per fruit, peel percentage, pulp percentage, total soluble solids (TSS), titratable acidity (TA), vitamin C and TSS/TA ratio. Dovyalis fruit has good physical quality for market with an average of 75% pulp. Vitamin C content averaged 120.3 mg/100 g of fresh fruit, characterizing dovyalis as a good source of vitamin C. © 2005 by The Haworth Press, Inc. All rights reserved.
Resumo:
Cytogenetic and random amplified polymorphic DNA analyses carried out in the species Leptodactylus podicipinus, L. ocellatus, L. labyrinthicus, and L. fuscus from rural and urban habitats of the northwest region of São Paulo State, Brazil, showed that the karyotypes (2n = 22), constitutive heterochromatin distribution and nucleolus organizer region (NOR) location did not differ between the populations from the two environments. The in situ hybridization with an rDNA probe confirmed the location of the NORs on chromosome 8 revealing an in tandem duplication of that region in one of the chromosomes of L. fuscus. DAPI showed that part of the C-band-positive heterochromatin is rich in AT, including that in the proximity the NORs in L. podicipinus and L. ocellatus. The molecular analyses showed that the two populations (urban and rural) of L. podicipinus and L. fuscus are similar from a genetic point of view. The urban and rural populations of species L. ocellatus and L. labyrinthicus showed differences in genetic structures, probably due to urbanization which interferes with the dispersion of those frogs. The marked differences observed between the two populations of L. ocellatus can be representing the cryptic condition of the species. Unweighted pair-group method of analysis and genetic distance analysis detected the genetic proximity between L. ocellatus and L. fuscus. The results indicate that there was no reduction in the genetic diversity in the populations from the urban environment; however, the survival of these frogs would not be guaranteed in the case of an increase in human impact especially for populations of L. labyrinthicus and L. ocellatus. ©FUNPEC-RP.
Resumo:
The study was conducted in the field, in the experimental area of the Section of Crop Production and Aromatic Medicinal Plants, belonging to the Faculty of Agricultural and Veterinary Sciences, Jaboticabal Campus-SP. The aim of the study was to assess the performance of seven genotypes of vegetable soybeans in Jaboticabal-SP. The experiment was carried out in a complete randomized block design with seven treatments (genotypes) and four replications. The genotypes examined were: CNPSOI, JLM003, JLM010, JLM018, JLM019, JLM024 and BRS216. The seeds were obtained from EMBRAPA-Soja and EMBRAPA- Hortaliças, and planted in Styrofoam trays with 128 cells containing Plantmax Hortaliças® as substrate. Transplanting occurred 10 d after seeding when the seedlings showed 2 or 3 definitive leaves and about 12 cm in height, demonstrating that the soil had been properly prepared according to the recommendations for this crop. Pests and diseases were adequately controlled in the event of their occurrence in the experimental area and in accordance with technical recommendations for the chemical products utilized. Collections were carried out based on the maturation of the pods, according to the scale of Fehr and Caviness (1977) adapted by Costa and Marchezan (1982), when the pods reached the reproductive stage R6. The parameters determined were mean precocity, height of the first pod, mean number of pods per plant, mean number of seeds per pod, fresh weight of 100 seeds and total yield of immature grains. Based on the results obtained, the genotypes JLM003 and JLM010 were found to be most indicated for growing vegetable soybeans, because of their capacity to produce immature grains of 1090 and 848 g·m-2, respectively, and fresh weights for 100 seeds of 62.20 and 68.19 g, respectively.
Resumo:
It is believed that the dissolution of chalcopyrite (CuFeS2) in acid medium can be accelerated by the addition of Cl- ions, which modify the electrochemical reactions in the leaching system. Electrochemical noise analysis (ENA) was utilized to evaluate the effect of the Cl- ions and Acidithiobacillus ferrooxidans on the oxidative dissolution of a CPE-chalcopyrite (carbon paste electrode modified with chalcopyrite) in acid medium. The emphasis was on the analysis of the admittance plots (Ac) calculated by ENA. In general, a stable passive behavior was observed, mainly during the initial stages of CPE-chalcopyrite immersion, characterized by a low passive current and a low dispersion of the Ac plots, mainly after bacteria addition. This can be explained by the adhesion of bacterial cells on the CPE-chalcopyrite surface acting as a physical barrier. The greater dispersions in the Ac plots occurred immediately after the Cl- ions addition, in the absence of bacteria characterizing an active-state. In the presence of bacteria the addition of Clions only produced some effect after some time due to the barrier effect caused by bacteria adhesion. © (2009) Trans Tech Publications.
Resumo:
Sr0.5Ba0.5Bi2Nb2O 9 ceramic was prepared by a conventional solid state reaction method and studied using X-ray powder diffraction and dielectric measurements. At room temperature, an orthorhombic structure was confirmed and their parameters were obtained using the Rietveld method. Dielectric properties were studied in a broad range of temperatures and frequencies. Typical relaxor behaviour was observed with strong dispersion of the complex relative dielectric permittivity. The temperature of the maximum dielectric constant Tm decreases with increasing frequency, and shifts towards higher temperature side. The activation energy Ea≈0·194±0·03 eV and freezing temperature Ta≈371±2 K values were found using the Vogel-Fulcher relationship. Conduction process in the material may be due to the hopping of charge carriers at low temperatures and small polarons and/or singly ionised oxygen vacancies at higher temperatures. © 2010 Maney Publishing.